The best flat roof finish is Longstrip Copper with Batten Roll or Standing Seam Joints.
@MrFlatroofer
2 жыл бұрын
The best materials for a flat roof is a 3 layer SBS Polyester torch on system. All professional roofers use it. A minimum life of 30 years.
@mikeheap7978
11 ай бұрын
Can't you put a shllow depth of white stone shingle on an EPDM roof to relect tbe sunlight. Thats what we use in the UK on top of a felt roof.
@devin5381
2 жыл бұрын
Thanks for the video!
@normanharris6023
6 ай бұрын
can you use any of these to collect water to use
@karenromero1703
Жыл бұрын
What about spray foam roof with silicone? That’s what I just put down on my flat….I mean flat (negative actually collecting ponds of water) created a slope with the spray foam then silicone coating. Had to tear out all the Bitumen roll roofing because water got under the layers.
@devinrobinsonx4442
Жыл бұрын
If I have a 10x10ft flat roof. What would you recommend to build and waterproof?
@FlyingFun.
2 жыл бұрын
I looked into all these and none were suitable due to overhanging cherry tree and the rotting effects of the sap leaves and cherries. Firbre glass reinforced plastic was the best option.
@theroofingchannel
2 жыл бұрын
Thank you for doing the research. We haven't found that tree sap damages any of the materials listed in this video (it does have other repercussions that will affect every roof material ), but as long as you make the best decision for your roof, then go for it! I bet those cherry trees look amazing.
@FlyingFun.
2 жыл бұрын
@@theroofingchannel the tree looks great and the cherries are lovely but it totally overhangs the garage and destroyed the felt roof into time at all, the birds eat all the cherries now before we get any and shit all over the roof so that's a contributing factor. It's a neighbours tree , they don't even like cherries but wont cur it down...
@leesmethurst1849
Жыл бұрын
Hi, what fibreglass system did you use? thanks
@FlyingFun.
Жыл бұрын
@@leesmethurst1849 can't remember the exact name, but GRP is pretty standard so I don't think there are many variations. I got a company to do it because the roof need complete rebuild including rafters , I priced up the materials alone and came to £1800 and they did it for £2000, I bet it will cost a lot more now.
@dd1984mm
Жыл бұрын
@@FlyingFun., check your local codes. There are laws that allow you to remove anything hanging over your own property, even if it's source is growing in the neighbor's yard..
@davidbright8978
Жыл бұрын
What about using ICF concrete roof?
@his3766
Жыл бұрын
What about underlayment for almost a flat roof?
@sharmaisha4010
Жыл бұрын
Is it okey to put metal panels over a rotted leaking roof ?
@timlintemuth8860
Жыл бұрын
I have a 20ft width x 12ft very slow slope epdm rubber roof. Maybe 4 inches. Its over my laundry room only 4 inches of insulation between out and inside. Torch down was awesome and lasted! FYI folks. My problem now is massive ice glaciers 4ft from edge back up roof. I roof rake with every storm but i am older and it kicks my butt. I missed the last storm, only took that one storm and it was back to ice build up. This stuff is heavy, dangerous and damaging. Please, is there anything I can do to help other then more insulation (which would have to be ceiling to floor) therefore lowering my ceiling inside? It just gets hot up there and melts the snow even on 20degree days if the sun is shining nicely.
@maryannsinopoli1751
Жыл бұрын
Which is the torch on roof material
@markearly5641
Жыл бұрын
Does the standing seam metal roof meet Miami Dade hurricane standards?
@jcs5449
Жыл бұрын
How can I determine the proper ventilation/ vents needed for my 2 flat . Flat roof. Im having humidity issues
@theroofingchannel
Жыл бұрын
www.lomanco.com/vent-resources/vent-calculator The Lomanco vent calculator works reliably for us.
@billlampson6932
2 жыл бұрын
SSMR Needs to be mechanically seamed for any slope under 3/12.
@joseoliver6314
6 күн бұрын
Thank you for your clear and excellent information, I recommended the channel called Drew's Roofing Stay Tuned. Here you have a new subscriber and my like.
@dominikkrzywdzinski3132
2 жыл бұрын
Epdm firestone 1.5mm 50lat, PVC 10-15 lat. Tpo (poliofefiny) 25lat
@dukemasters6829
Жыл бұрын
Didn’t look like flat roof to me it looked like a pitched roof to me
@marksmith2090
2 жыл бұрын
At 2:16 that should read Kynar 500, not 'kind-of 500'.
@theroofingchannel
2 жыл бұрын
Good spot! Thanks for the heads up. It's fixed now.
@marksmith2090
2 жыл бұрын
You're welcome!
@eastside0434
Жыл бұрын
EPDM roofs have many problems, good for 20 yrs or less.
2 жыл бұрын
Are these really the only options for flat roofs?
@theroofingchannel
2 жыл бұрын
Not at all! A popular option that we didn't include in this video is Modified Bitumen (MB). There are other materials besides even that, but they are generally either outdated or unreliable.
@MrFlatroofer
2 жыл бұрын
@@theroofingchannel SBS ,polyester torch on (MP) is not outdated, There are not many skilled enough to use it. That's why many are using rubber or GRP. half a day instruction and away you go a fully trained roofer.
@theroofingchannel
2 жыл бұрын
@@MrFlatroofer We agree that a torch-on roof with good installation is a great roof system. If a homeowner can find a good contractor to install their torch-on, it's a solid choice. The main reason we have a hard time recommending it is the higher risk that you get from hiring an unprofessional contractor; we've seen too many fire accidents in our Tennessee area. It would make a great video topic in the future to go over how to find a good flat roof contractor to install a torch-on. If you have any qualifying questions to ask a flat roofer to see if they can do torch-on, let us know!
@MrFlatroofer
2 жыл бұрын
@@theroofingchannel Thanks. I am nearing 80 yeas old now and the knees are tiring when climbing up and down ladders and carrying heavy weights otherwise I would have made a video of a flat roof that would last a 100 years. and it would be cheaper and nicer looking than ,TPO, GRP, Rubber etc. The metal roof on your blog looks good, but then it is not a flat roof, it is a sloping roof. Bless y'all.
@karenromero1703
Жыл бұрын
Maybe modified bitumen roll roofing but if you have no slope do not just torch it down better to hot tar mop it down. Otherwise you risk water getting in the seams and under the rolls. Unfortunately I speak from experience. I had to tear of all my modified B rolls and decided to create a slope with spray foam (closed cell) with a silicone coating. Totally waterproof and durable.
Пікірлер: 38