Excellent video! Many videos from tire shops just tell you you have uneven wear and something is wrong but FAIL to explain the reasons and educate the people. Thank you!
@elgatogordo9523
Жыл бұрын
My son’s 08 Taco had similar front tire wear. We ended up replacing the entire front end suspension with new struts, upper/lower control arms, and inner/outer tie rods. No Uneven wear after 3500 miles 👍 Thank you for your videos 👌🏼
@fyb3rotik
Жыл бұрын
I hope I don’t have to do that much, I can’t afford it
@fernandoestrada1335
Жыл бұрын
Great video explaining which parts are part of alignment and which are not .
@jimthumerzs2301
Жыл бұрын
Great video for us amateurs. I would have started to suspect that something got bent, causing the tire wear.
@chafikketan6594
10 ай бұрын
Yes sometimes accident or they get too old
@calebbadillo720
6 ай бұрын
Great walk through of the different parts that could effect alignment and, in turn, tire wear.
@andrewcolicchio766
Жыл бұрын
Thanks ALOT. I have 02 Prerunner with same tire issue. I've changed everything exc ot upper & lower control arm. And upper ball joint (R). Bought another set of tires and your information was very helpful.
@denniswilson1407
Жыл бұрын
Really good. This is helping me narrow down the cause of similar tire wear on an Audi A4 B8 with severe inner shoulder tire wear.
@JamesHamp93
5 ай бұрын
Did u find out which arms (if any) were causing this? My b8 A5 had the same issue on drivers side. Sounds a little noisy over rough patches in the road. Replaced both bottom arms but it's neither of those. Thinking maybe the upper arms but I'm not looking forward to taking the pinch bolt out 😂
@johnpatmos1722
11 ай бұрын
Thanks for walking through inspection, naming parts and their function.
@habbadabbado5765
Жыл бұрын
Excellent explanation and specific walkthrough of the components.
@stansbruv3169
Жыл бұрын
Glad this guy made it to you before that tire disintegrated on the highway!
@michaelbrennan7148
Жыл бұрын
Thank you Peter.
@TedEischeid1960
Жыл бұрын
In the first generation 1995.5-2004 Tacomas, a known weak link in the front suspension is the LOWER ball joint. Catastrophic failure of these does occur, and they should be replaced every 100,000 miles with OEM ball joints.
@LAactor
Жыл бұрын
Amazing. 25 year old truck but only lost 6000 or so in depreciation. Goes to show how good these cars are.
@useryggfdcc
Жыл бұрын
On my 2021 Taco both outer side of tire showing wear. Its about even on both front tires. It could be misalignment or component wear.... Time to do some inspection. This video really help..
@aldomassa7473
Жыл бұрын
Always learning with you Peter, thanks for everything.
@tundramanq
Жыл бұрын
When the control arm bushings get loose, I throws off camber, castor and toe-in/toe-out alignments. Toyota uses great rubber but time and environment eventually kills all rubber things.
@FredTheLutinoCocatiel
Жыл бұрын
I need to replace inner tie rod end on my 1999 Toyota Corolla LE so I will replace outer tie rod end also.
@rowneyt
Жыл бұрын
Excellent explanation. Pity it’s in a Scandinavian dialect! (Just kidding, best front end diagnosis on YT. Well done.)
@darrylblack6711
Ай бұрын
Nice video😊
@franciscocarrillo6606
Жыл бұрын
I need more manual 1999 - 2004 Tacoma 2.4L base
@osmarhernandez8372
Жыл бұрын
ball bearing also afect alignment in those trucks. you should check all.
@carlbishop2715
Жыл бұрын
Awesome as usual!
@cartap22
Жыл бұрын
Yeee let’s get the story on what happen to the scion TC please
@dougaustintx
Жыл бұрын
I would like to know what the toe-in/toe-out was on that Taco.
@larrybailey1896
Жыл бұрын
Good movie..Thanx.
@outoftime788
3 ай бұрын
wat bout rear tires? my 09 sienna rear tire get worn on the inside never my front tires
@Ammut6
Жыл бұрын
Im assuming this is true when looking for culprits in a 2006 Rav4 4. Got uneven front tire wear. Lower ball joint was replaced a year ago but I failed to inspect any of the suspension when I did the replacement.
@chrismuncey6023
4 ай бұрын
I'm having like this also the ac is flashing in my 09 camry it blows hot now matter what even if the ac compressor is working can u help?
@Ammut6
Жыл бұрын
0:23 is that geese I hear in the background? Lol
@dylan3657
7 ай бұрын
top class
@joecia7
Жыл бұрын
Let's say the power steering was leaking, would that cause the truck to pull to one side and wear the tires? That's my current situation with my 07 Tacoma.
@chitoflores4799
Жыл бұрын
Maybe if the time rods are messed up.. is it leaking from the rack ?
@joecia7
Жыл бұрын
@@chitoflores4799 yes, very slow leak from the passenger side rubber boot.
@2148aa
Жыл бұрын
Assume after the ball joint fix// There is an alignment in the future??
@passion830217
Жыл бұрын
I would drive it and see. If it drives without pulling. I would like to save the $110.
@ch1959
Жыл бұрын
You should always realign after replacing a critical part like a LCA bushing. You won't always have a pull when the camber is out.
@passion830217
Жыл бұрын
@@ch1959 That is not true. It is only true in theory. I have done that after replacing control arms and sway bar links without doing alignments.
@LAactor
Жыл бұрын
@@ch1959 I didn't even need to change any suspension parts but have bought a new set of tires before, and did not do an alignment, did rotations every other oil change. Wore through those 30k tires in a year/12k. Never pulled. And I wasn't drifting. Front drive Lexus. People want to save $100 in alignment but lose many hundreds in new tires, smh, people don't think!!
@TwilightZoneX
Жыл бұрын
💯💯
@dk7863
Жыл бұрын
👍
@franciscocarrillo6606
Жыл бұрын
MANUAL 1995- 2004 TACOMA
@frankponte4031
Жыл бұрын
Great content as usual. Thanks Petr!
@oldesarge
2 ай бұрын
Thank you sir. Excellent video.
@virginiagriffin8288
Жыл бұрын
This is what's going on with my tires on the front end of the right-hand driver-side there are eating my ties up from the inside
@barryraoufi8119
Жыл бұрын
Where is map sensor on my 2005 Corolla S? please I looked all around intake manifold
@RickG13
Жыл бұрын
Could lower control arm bushings cause the tire to severely wear on the outside edge? This is what is happening to my tires in the front and the mechanic said it was the lower control arm bushings.
@thehawk05
11 ай бұрын
Yes it can. What can happen if the lower control arm bushings are bad is it can cause the control arm to push in excessively (towards the engine) when you turn. This can cause the camber to shift to a positive. Excessive toe-in is also a common cause as well
@motalebhossain7551
10 ай бұрын
Nice garage 👍👍❤
@franciscocarrillo6606
Жыл бұрын
❤❤❤❤❤
@BigZaddy2112
11 ай бұрын
Excellent explanation! Thank you! My 2001 Chevy Astro tires have the same wear….now I know where to inspect 🫵✔️👍
Пікірлер: 54