Bro I just ordered my first decals from Jonak, and this video couldn’t have been posted any later! Thanks!
@o5s1an
3 жыл бұрын
OMG BRO I SWEAR I WAS JUST ABOUT TO COMMENT THAT
@jklmvideos7105
3 жыл бұрын
@@o5s1an haha sorry 😂
@o5s1an
3 жыл бұрын
@@jklmvideos7105 Lol great minds think alike
@jklmvideos7105
3 жыл бұрын
@@o5s1an 😂 yes they do
@SW_Bricks
3 жыл бұрын
Ah perfect!! Good luck!
@Dark_Lightning09
4 ай бұрын
I have recently been interested in decalling and this has motovated me
@o5s1an
3 жыл бұрын
SW I have an idea, seeing as you've made quite a few decaling vids now, maybe you should make a playlist so if newcomners ask how to decal or you make more decaling videos, you can have all of them in one place.
@SW_Bricks
3 жыл бұрын
Great idea ill do that now! Thanks bud!
@commandercody4984
3 жыл бұрын
@@SW_Bricks can you do a video on the custom clone commando fives figure
@tallguy407
3 жыл бұрын
I’ve been thinking about starting decaling but I couldn’t find some of the materials such as : blank minifigs, and the decals themselves. This video helped so much! I’m definitely going to start decaling! 😀👍
@Mcgucci88
Жыл бұрын
If you’re in the UK blue Harvest
@TheSaberTrooper
3 жыл бұрын
Great tutorial! I probably won't decal, but seeing the process was Epic!
@SW_Bricks
3 жыл бұрын
Ahah thats good! Glad you enjoyed it!
@infernostorm7446
2 жыл бұрын
Getting some from blue harvest this video saved me as I’m a complete noob in this hobby so it’s great to know what tools and sites to check out if I want to get some new ones later
@jbbrickshop7320
3 жыл бұрын
Thanks for the shoutout!
@SW_Bricks
3 жыл бұрын
Anytime!
@baconbriqs
3 жыл бұрын
I didn’t know JB had a channel
@jbbrickshop7320
3 жыл бұрын
@@baconbriqs I don't lol. I'm working on making one rn but itll be under a different name :)
@thetotaldramaking5427
3 жыл бұрын
Man this has actually helped me.. even though I already decal!! Thanks man!!
@SW_Bricks
3 жыл бұрын
Im glad! no worries!
@brix6632
3 жыл бұрын
Thanks for the advice to take the holes from the cloths and great job !
@SW_Bricks
3 жыл бұрын
No worries that helps soooo much
@rookie9028
Жыл бұрын
I'm planning on making the lsw iii mission ambush with jek, thire and rys. This helps a ton
@GCB-2008
Жыл бұрын
For my sealant rack I used a bunch of fake Lego I had and I gotta say it works better than I thought
@christiansalgado792
3 жыл бұрын
YESSSSSS THANK YOUUU!!!!!!!! I WAS GOING TO BUY TOOLS AND STUFF MY FIRST EXPERIENCE OF DECALING!!!!!!!!
@SW_Bricks
3 жыл бұрын
Awesome hope you enjoy it!
@grafusdoekus8584
3 жыл бұрын
My decals and parts recently arrived so this video came just in time!
@SW_Bricks
3 жыл бұрын
Ay thats sick!
@CoastalCanadian
3 жыл бұрын
You need to do some more detailing on stream plz
@SW_Bricks
3 жыл бұрын
I will soon!
@starwarskid7389
3 жыл бұрын
Thanks for showing us! Very neat video. They look sick
@SW_Bricks
3 жыл бұрын
No problem 👍
@legochannel5040
3 жыл бұрын
really cool tutorial helped a lot!
@SW_Bricks
3 жыл бұрын
Im glad it helped
@stormproductions3619
3 жыл бұрын
This is awesome! Love these things and I have pretty much everything
@SW_Bricks
3 жыл бұрын
Ah thats good!
@dea-gaming_ita3147
Жыл бұрын
For the spray finish which one gives results closer to official Lego? I mean gloss or mat? Anyways this video is really helpful! I'm thinking about getting a commander for my purple clones but i don't want it to stend up too much compared to the others.
@ThatShady1
Жыл бұрын
yeah I have no idea I have been wondering that too but I would assume mat?
@imperialshocker2182
3 жыл бұрын
Thanks man , this will really help in the future .
@SW_Bricks
3 жыл бұрын
Awesome im glad!
@brohammercustoms2383
3 жыл бұрын
Thank you man for making this
@SW_Bricks
3 жыл бұрын
No worries!
@BrickYardNation
Жыл бұрын
Thanks for the tutorial! I am getting a ton of free decals from a friend pretty soon, so I am glad I watched this. Also, is it 100% necessary to carve the hips? I feel Ike it might ruin the playability.
@perrsus8995
Жыл бұрын
Its not neccesary but ive been decaling for a few months and most of the time if u dont carve the hips it makes it much more difficult to move the legs and most of the time i find the decal gets ruined.
@beanoz5490
2 жыл бұрын
Thanks for the information can’t wait to start decaling
@burakguncu8163
2 жыл бұрын
I just saw the word "decal" and "Lego clones" and with instinct just pressed on the video.
@hazy8ce53
3 жыл бұрын
Lol I’m into decaling but I’m so lazy I’ve got like 20+ decals to do but only done 2 so far 😂
@SW_Bricks
3 жыл бұрын
Ahaha I know the feeling!
@legobeamryan1315
3 жыл бұрын
Just finished decaling bacara from av, but this is a great video
@SW_Bricks
3 жыл бұрын
Nice thats sick!
@Kyoumq
3 жыл бұрын
You are the best KZitemr 😀👍👍👍
@SW_Bricks
3 жыл бұрын
Thanks bro that means a lot!!
@Cilliancalton
3 жыл бұрын
This is very helpful, idk if I'll even get into decaling
@SW_Bricks
3 жыл бұрын
I would recommend it its sick
@SirenHead00
2 жыл бұрын
i want to but carving out those legs, is just a stopper for me bruh xD
@CommandoBrickLEGOstarwars
3 жыл бұрын
I failed my first time so I hope I can do it now
@SW_Bricks
3 жыл бұрын
You got this commando give it another go!!
@mick3520
3 жыл бұрын
Thank you. This Video was very helpful.
@thecrownsknight5105
Жыл бұрын
this seems like so much god dam effort
@Karate-xt4sk
2 жыл бұрын
Already have the citadel moldline remover since I use it on my 40k models
@StudStuff
3 жыл бұрын
:0 I need to try this!
@SW_Bricks
3 жыл бұрын
Its so fun!
@brickbattalion6489
3 жыл бұрын
I needed this video! Great time to upload! And great video! Also, do you need to carve the hips for Jonak decals?
@carsonthomas4173
3 жыл бұрын
If you could only get one, would you choose the citadel or the nail file. I only really want to get one.
@silverstargaming20
2 жыл бұрын
Do you need to carve the hips? I know if you're using 360 decals, it's a bit more necessary. But I personally like the 180 ones, and I just feel like it'd ruin any playability for the figures.
@tallietorchersproductions2740
Жыл бұрын
Personally, I don’t really like 360 decals as it doesn’t really fit in with the vibe of all my other figures i suppose
@dogeplayz5122
3 жыл бұрын
Thank u so much for the help u earned a sub!
@That1mandalorian
3 жыл бұрын
I was on blue harvest for a look and he other day and I saw an omega decal i was thinking I’d try and make one cuz if I get the bad batch shuttle I want an omega to go with them
@lt.danhooper1635
Жыл бұрын
Wait does it *have* to be a blank torso? If it has print on it, will it show through the decal?
@Naviwolfweddy
5 ай бұрын
My worry is that I slip and ruin it. I would be doing international shipping for the tools and stuff so it would cost around 30 dollars.. (or in my currency R600) so it’s quite a bit especially for like 3 clones in total..
@OVBricks
3 жыл бұрын
thats the craziest hole puncher I have ever seen lol! Thanks for the tips!
@SW_Bricks
3 жыл бұрын
Ikr it kinda scared me when I first saw it! 😂
@OVBricks
3 жыл бұрын
@@SW_Bricks lol 😂
@Harrya_07
3 жыл бұрын
soon can you do a tutorial of a sort, or just your process you go through when doing an av figure ?
@SW_Bricks
3 жыл бұрын
Yeah I guess I can do that! Keep an eye out!
@Blue_Brick_Studios
Жыл бұрын
This isn't the first time I've watched this video lol, hopefully I actually get round to decaling this time, just a question, when buying the plain torso from bricklink, do you get a fully white torso and add the black hands later as I can't find a white torso with black hands on bricklink? thank you
@MrLego44
3 жыл бұрын
this very helpful but i have a question. i know that you can get av figures helmets on the av figures website but they are always out of stock so do you have any recommendation on where to get them?
@SW_Bricks
3 жыл бұрын
Ah yeah that is annoying, at the moment theres not really any alternative sadly
@God-hw1xs
2 жыл бұрын
Clone army customs always has blank helmets never sold out
@johnpauljones4190
4 ай бұрын
Where can i buy full white ,clean clone troopers without decals ? Please somebody help.
@jaehaerys9194
2 жыл бұрын
Still afraid to do it... also don't think i have enough space for that...
@jay-fs7wf
3 жыл бұрын
where do you get the plain clone trooper p2 helmet
@SW_Bricks
3 жыл бұрын
Message JB_brickshop on instagram!
@iconicmoments123
3 жыл бұрын
Nicee
@jdstudios1912
7 ай бұрын
I have a question about the micro sol. Once you've applied the decal and sponged it after you then apply the micro sol do you then apply the sponge again or just leave the decal to dry for a bit? If so how long should I leave the decal to dry before I seal it?
@sayoofoof
Жыл бұрын
actually i wanna know how long should i put the decals in the water, and if too long will they break apart? bc i wanna get some of these soon
@alicastro2119
Жыл бұрын
Anybody know how long you should wait for the sealant to dry?
@leadedbison1997
Жыл бұрын
Just do 24 to be safe
@d4rk363
Ай бұрын
I'm wanting to pick up a phase 1 fives from jonak toys but the arms are the only decals I would need for it would I still need sealant for it if it's only for display?
@julianlarson9335
2 жыл бұрын
Any info on where to design/commission custom decals?
@beeeza86b67
2 жыл бұрын
How much sealant do you put in order to seal and coat it? How many times too, only once?
@SW_Bricks
2 жыл бұрын
Just a light spray for a few seconds! Go watch my how to seal decals video
@DeveloperNes
Жыл бұрын
the link to the minifigs is to a random tiktok short, can you please fix it because i cant find plain white legs anywhere
@wolftrooper1046
3 жыл бұрын
Sw if u look at my newest video you'll see what I bought but what else do I need to do it?
@noahgallen7727
2 жыл бұрын
in bendle bricks ok to buy decals from
@blackops0UT
3 жыл бұрын
do u hv any alternative for sealing figs coz where i live dont sell any sealant
@SW_Bricks
3 жыл бұрын
Try amazon?
@brendenfletcher3761
2 жыл бұрын
Is it worth it to start recalling if you are a history geek getting into the clone wars I also an in school so it might be hard to balance time and will decals hold up in stop motion
@Cwaniak0602
3 жыл бұрын
Can you make a video step by step while you’re doing decaling
@destroyehstudios2107
Жыл бұрын
This is great! Is it 100 percent necessary to carve out the hips? Or will it ruin the figure if I don’t?
@SW_Bricks
Жыл бұрын
1000% necessary!
@destroyehstudios2107
Жыл бұрын
@@SW_Bricks alright, thanks! Could I ask you a few other questions?
@SW_Bricks
Жыл бұрын
@@destroyehstudios2107 Sure, if you wanna guarantee I see them then feel free to message me on instagram!
@destroyehstudios2107
Жыл бұрын
@@SW_Bricks sure, I’ll send that once there made! Should I let them dry outside? And if so is it okay to do so in winter or will it damage the plastic?
@meisteryoda4263
Ай бұрын
@@SW_BricksWhere can I get blank minifigures? Because the link in the description does not work for me.
@eggs30812
Жыл бұрын
Do you have to use sealant on the figures?
@SW_Bricks
Жыл бұрын
Yes 100%
@troopergio
3 жыл бұрын
Did JB Bricks get suspended off Bricklink? I can't find him on it
@Harrya_07
3 жыл бұрын
do you need the micro sol set, would you say its a need or would you say not to bother
@hazy8ce53
3 жыл бұрын
It’s just extra if anything have the sealant
@SW_Bricks
3 жыл бұрын
Nah you dont NEED it but id say if you want one then SET is more important but neither are essential!
@charlesboettner4716
Жыл бұрын
Did you have any problems with JONAK Toys
@owenracker3599
2 жыл бұрын
How long do you soak the decals for
@user-sb9yi8nu4s
19 күн бұрын
this is a normal paper?
@generalkenobi8933
3 жыл бұрын
Is there an alternative that I could use to the sponges like cotton balls or something?
@monkey7965
Жыл бұрын
What paper do they use?
@adamditchburn2506
3 жыл бұрын
Hey do you know of any one who sells the equipment as a begginer set
@SW_Bricks
3 жыл бұрын
Not sure.... Try looking on Jonak and thiccy's websites
@bruhmen4273
2 жыл бұрын
Hey man I was wondering with the sealant which one is better the gloss one or the matt one??
@nic04las62
2 жыл бұрын
I've heard that glossy sealing fits in better with official lego figures
@Thegamingtrooper2468
Жыл бұрын
Hi I'm going to start decaling what decals would you recommend 180 or 360
@gamerboiche8189
Жыл бұрын
if ur a beginner i suggest 180s due to 360s being pretty complicated
@kebabmf
3 жыл бұрын
I wish the shipping from wasnt so expensive, its 30$.... I wish it was like 10
@LegoMaster-le6cx
2 жыл бұрын
This is soo vool
@y3llowgrap371
3 жыл бұрын
When ever I spray my figures, they’re always really stiff. Is there a way to stop that?
@jklmvideos7105
3 жыл бұрын
Are the limbs stiff?
@y3llowgrap371
3 жыл бұрын
@@jklmvideos7105 Yh and the head doesn’t come off when I put one on
@jklmvideos7105
3 жыл бұрын
@@y3llowgrap371 well you might want to carve out the hips and carve the arm hole on the torso slightly. Now with the head, i don’t really know. Did you have the figure fully assembled when you sealed it?
@y3llowgrap371
3 жыл бұрын
@@jklmvideos7105 no I apply the decals and put them on a stand similar to the one in the video the spray. Thanks for helping
@jklmvideos7105
3 жыл бұрын
@@y3llowgrap371 yep no problem. I hope you can figure out the head/helmet issue!
@fnafgames2997
2 жыл бұрын
Is sealant really needed or can you use decal fixer and decal softener instead? Because I can’t find sealant anywhere
@SW_Bricks
2 жыл бұрын
YES 100000% needed
@fnafgames2997
2 жыл бұрын
@@SW_Bricks oh I can’t find it anywhere
@Exnth
4 ай бұрын
i think ill just use my swiss army knife
@Legomotionfake
Жыл бұрын
I want to do this but I don’t have many clones and the tools. Also I’m still a kid so my parents would be suspicious if I ask for these
@cesruhf2605
3 жыл бұрын
Coming from the gunpla community it seems pretty easy but my wallet seems to disagree
@samvill.
2 жыл бұрын
Umm is there any decals that are free...?
@bzbricks3621
3 жыл бұрын
can you use a brush-on water-based sealant like mod-podge??? I am new to decaling and just placed my first order on jonak and need some help, this helped a lot so thanks! but I don't have spray-on sealants, only the brush-on mod-podge, does anyone know if that will work?
@SW_Bricks
3 жыл бұрын
Not too sure, I know there is a brush- on sealant but ive never seen it or tried it. Oh cool! Glad it helped! Hopefully someone can help give you an answer but im sure it'll work
@subcult3329
3 жыл бұрын
Never tried using brush sealant but I have a feeling it well peel the decals off
Пікірлер: 150