The glue’s doing 90%+ of the work, but the dowels do make it look pretty
@billopad9625
Жыл бұрын
Disagree… if you pulled hard enough on just glue it could break the joint, (admittedly hulk smash strength required!) with the dowels, the joint can only fail if the receiving piece breaks or bends. Ie. You could do this joint with zero glue…
@MrPlayaaah
Жыл бұрын
Woodglue is absolutely 90%+, the glue joint is stronger than the wood it connects
@cracktact7676
11 ай бұрын
@@MrPlayaaahthe glue is stronger than the lignin that holds the wood fiber together, it is not stronger than the tensile or compressive strength of the wood
@Tatusiek_1
9 ай бұрын
@@cracktact7676good to know
@MegaFlorest
8 ай бұрын
Yes, but without glue this joint would hold. It's similar to some Japanese joinery methods.
@thesmokewagon6302
Жыл бұрын
Maybe dowels in pocket /hole drilled at 45* angle instead of 90*?
@johnburns2940
Жыл бұрын
Cabinetmaker says "I like this joint." Although I have not actually made this joint myself, because the millwork is tight and accurate, it has excellent light duty function.
@Barryhatchet
11 ай бұрын
I made a table without glue and only using joinery. I loved that table. I could take it apart and put it back together. Please do a table using joints and no glue or nails. I like that joint better without the glue
@kiwiworkshop
11 ай бұрын
I would enjoy that project and will keep it in mind. For the joint in this video, the requirement for glue depends on the application. It's often used by luthiers for attaching the guitar neck to the body. Glue makes sense for this application.
@sami5531
8 ай бұрын
No you did not...
@billopad9625
Жыл бұрын
Kiwi, can you do this joint again without the glue to prove it’s strength! 👍
@kiwiworkshop
Жыл бұрын
It would be an interesting test - with and without glue!
@CLove511
11 ай бұрын
It wouldn't have any holding power "up and down", where one good smack would separate the pieces. Now if this were an enclosed mortise-and-tenon, it would work quite well
@mikel5582
5 ай бұрын
I could see this as a glueless knock-down joint, similar to a tusked tenon, *_IF_* if it was prepped as a mortise & tenon rather than what's essentially a dado. Instead of dowels, it could be held with cotter pins. But there's probably better options for that application.
@silkiesimon
11 ай бұрын
You 2 are corrected, I still like the look, decorations.
@melissacastle5172
Жыл бұрын
I love this one, can’t wait to try it.
@LindsayWilson-vj1wc
8 ай бұрын
We were never allowed to use glue except when rub glue jointing two or more boards lengthways to make a slab.
@alfredomarquez9777
Жыл бұрын
Putting glue on the dowels guarantees it will be WIPED out of their surface... You need to cut shallow grooves on the dowels with the corner of the edge of a sharp chisel, to allow the glue to flow through them and cover all the dowell surface.
@Gelato43
11 ай бұрын
Wood absorbs glue, its not like metal where if you wipe it you get a clean wipe, i guaranteed those dowels are glued in. Sure they will be glued in better if you do what you said to do, but thats overkill for this situation. I dont think there is much glue on those dowels at all but again, i think there is enough to hold them in from sliding out on their own
@SeaHay
10 ай бұрын
@@Gelato43lets have it put to the test?
@user-rc7wo6de9z
10 ай бұрын
@@Gelato431
@DMKarnholio
7 ай бұрын
my dude,.. you -do- know wood is porous, don't you?
@CLove511
11 ай бұрын
Ah yes, the dimpled butt joint
@ryanharlow82
Жыл бұрын
Dope joint bro!
@leftymariano1020
4 ай бұрын
This is how the japanese build their houses its called sashimono no nails or screws that corrode just grooves and wooden pins
@lloydbrock6806
11 ай бұрын
I like joints
@pakde8002
Жыл бұрын
It's a nice detail but with glue over three large planes it probably isn't helping with the strength that much. It would make more sense if you weren't using glue. But aesthetically two thumbs up.
@TommyMakesWood-zo3bz
4 ай бұрын
every detail is perfect , love
@barryanthonywing4848
6 ай бұрын
Excellent work 🤝
@VikashKumar-tf3cc
11 ай бұрын
Is it possible? The perfection is
@shortaybrown
Жыл бұрын
What’s the reason for the dowels? To hold the joint in place or to strengthen the joint? Thanks!
@kiwiworkshop
Жыл бұрын
I'm not entirely sure about the background of this joint but assume the dowels provide extra strength against tensile force pulling on the intersecting piece. Apparently luthiers use this joint but not of the exact application. It was fun to try it out!
@peterdefrankrijker
Жыл бұрын
Yes.
@daianbotelho
3 ай бұрын
So satisfying!
@kitemonger
8 ай бұрын
I like it!
@TheLastPharm
3 ай бұрын
Nicely executed, uniformity is great.
@user-ff2vf2ss2m
3 ай бұрын
건축은 예술이다~~!!
@CarlosGarcia-yk2lk
Жыл бұрын
Nice work
@OmegaRiley
11 ай бұрын
Took me about 15 seconds to realise this wasn't an Ozomoc animation.
@earlnation720
6 ай бұрын
As someone who hasn't worked much with special jointery, I may be way off, but it doesn't seem like the dowels are actually doing anything, and just using glue on the boards would have the same strength. Am I wrong?
@kiwiworkshop
6 ай бұрын
The dowels prevent the joint pulling out, imagine a horizontal pulling force on the joint (not vertical). This joint is commonly used by luthiers to prevent the guitar neck from pulling out of the guitar body.
@user-jw4hf8ey2y
9 ай бұрын
いい勉強になります😄👍
@ivanmillar7084
Жыл бұрын
Hermoso trabajo 🇨🇱👍
@SacredFenix
3 ай бұрын
Красота!
@user-qr9te4pj9w
7 ай бұрын
Как же любите усложнять себе жизнь! Пропилы без промежутка, красиво и не нужно применять стамеску с молотком, теряя при этом время.
@javierdominguezvicente3196
10 ай бұрын
Anda ahí ARTISTA 🎉🎉
@farmerdave7965
9 ай бұрын
Did you glue it before you dowelled it ?
@mohdshujaat6794
Ай бұрын
Hey! Could you please tell me what's the name of this wood?
@malik19790824
11 ай бұрын
Useful
@dmxumrrk332
Ай бұрын
По мне, там и клея бы хватило за глаза. Добавление шкантов явно избыточно.
@user-zg9wi7gn7u
3 ай бұрын
最後に刷毛で塗ってる液体は何ですか?
@wjlortho
8 ай бұрын
shear problem, hope the glue is adequate
@Hellsong89
8 ай бұрын
When architect gets too much power over the plans -engineers point of view. Might work some what in lower frame parts, but its almost completely visual not structural.
@kiwiworkshop
8 ай бұрын
This joint has a number of practical uses. It's commonly used by luthiers for attaching the guitar neck to the body, where it resists against pulling force.
@sambearing7687
7 ай бұрын
Прелестно, Браво!
@princedhyani1025
2 ай бұрын
👍👍👍
@mrseaweed5587
8 ай бұрын
ok yeh, thats yellow pine??? perfect joinery. dowells. eh. no need. looks cool. i just put on the opposite side. increase strength.
@user-mg7yd9wk8r
Жыл бұрын
Whats the wood finish u use at the end to to make it stand out I'm just learning got nvqL1 carpentry and joinery want furniture making or apoxy tables
@kiwiworkshop
Жыл бұрын
It's Danish oil
@Lunnyi_Uh
Ай бұрын
Как такая пила называется?
@fatal510
3 ай бұрын
Is this pine?
@cjstrick2010
11 ай бұрын
What type of wood is that?
@ermanvar6300
11 ай бұрын
I also wonder that
@daniyalfauzansiddique
5 ай бұрын
What is the name of this wood
@kiwiworkshop
5 ай бұрын
Pine
@josephcauthen9448
3 ай бұрын
Why is your joint staring at me?
@Cerdutex
Жыл бұрын
It was a good joint already, no need for those 2 dowels.
@kiwiworkshop
Жыл бұрын
If there is tensile force pulling on the intersecting piece, the dowels have a purpose.
@dlewis2446
8 ай бұрын
You shouldn't use this joint for anything like that(pulling force), dovetail or lapped dovetail would be the way forward tor that application. This joint(bridle) is for load bearing downward force in which case the dowels are serving no purpose whatsoever.
@trillrifaxegrindor4411
3 ай бұрын
check out korean and japanese wood joinery...........makes this look like childs play
@redharvst8638
10 ай бұрын
Are you making your dowels or buying them. If buying can you link vendor please.
@kiwiworkshop
10 ай бұрын
I'm making them
@davidcole333
2 ай бұрын
might as well just utilize loose tenons
@henri7433
3 ай бұрын
mmm creo que no , recibio dinero por ese trabajo , ( solo experimenta en casa wuaajajaj )
@GaragemCriativa-vc6de
8 ай бұрын
Muito bom
@user-po3uy7do8s
8 ай бұрын
Как называют сверло
@Egorletovplitka
9 ай бұрын
Это две разных работы на видео
@user-ue7ko8rz9b
10 ай бұрын
С такими инструментами я бы удивился если бы он сделал плохо
@aurethlouw8274
11 ай бұрын
🤔where would I use a T joint
@ivandrojosehanauer9176
Жыл бұрын
Sensacional 👍
@user-jj9hz4ze4
10 ай бұрын
Это не дюбеля это шкант соединяет изделие
@mariosd9984
12 күн бұрын
Uau
@questiontime6822
3 ай бұрын
Serves no purpose with dowels, not even aesthetics
@ElmagicElectronics
11 ай бұрын
عاش يا بطل
@archerpro137
11 ай бұрын
Alakit alot.
@joshuabartley1279
7 ай бұрын
To people saying this joint isn't strong, without any glue I would love to see you pull this joint apart. Pull the boards apart. Post your video. That's right many of you can't even make this simple joint.
@huntedby666
Жыл бұрын
Finally someone that does it right, the amount of wtf stuff I come across on here.
@vladimirzapolski-nm4be
7 ай бұрын
Мажется гнездо , а не нагель.
@sami5531
8 ай бұрын
Why would you do that😂
@ners7121
8 ай бұрын
Клей наносится в паз!!!
@wolemai
8 ай бұрын
I can't stand it. A guy does a first class job and then all the "experts" come on and tell him how to do it better.
@alexanderSydneyOz
8 ай бұрын
um, he asked for those opinions in the title of the video.
@intrametaarchi1015
10 ай бұрын
undermining the structural integrity
@RylanStorm
3 ай бұрын
Probably going to be quite weak.
@Random-ei2uo
8 ай бұрын
aaaarrrgh video like this make me want to spend 2+ hour calculating the maximum stress that can be exerted just so i can say "yep my instinct were right"
@OctaApe
3 ай бұрын
meh. its ok it it doesnt have to support anything.
@idlsjay
3 ай бұрын
What does it do and for what is it used?? Looks useless to me 😂
@kiwiworkshop
3 ай бұрын
It's used by luthiers for joining the guitar neck to the guitar body
@muslimsolider7936
4 ай бұрын
This is not real sashimono. I don't like it. 😮💨👎
@renandavidsoriaahumada6093
3 ай бұрын
WHY? too much work for too little load bearing, eated too much of the first wood bean, and the dowels whould only apply presure on the weaker beam
@kiwiworkshop
3 ай бұрын
This joint is commonly used by luthiers for preventing the guitar neck from pulling out of the body. The dowels make it virtually impossible to pull out.
@renandavidsoriaahumada6093
3 ай бұрын
@@kiwiworkshop ahh well if is not for construction and just made to prevent dissassembly Then it has its merits, as a construction worker my spider senses gives me Jolt whe i see that
@johnnybgoode6466
3 ай бұрын
great work - but shitty pine again
@alfredo9445
3 ай бұрын
Ugly . It looks patched . Keep in mind that you are not making aquilt . !!!
@gazuaaaa4840
8 ай бұрын
in this video that dowel dosent do anything to sustain the weight its just for fashion haha
@kiwiworkshop
8 ай бұрын
That is not correct. For various applications of this joint, the dowels will prevent the joint coming apart. This joint is commonly used by luthiers to prevent the guitar neck from pulling out of the guitar body. The dark dowels in the video were to help demonstrate the joint.
@gazuaaaa4840
8 ай бұрын
@@kiwiworkshopbro, in case of guitar neck the dowel is stuck as 90 degreee to hold the weight , but ur dowel style is just relied only on glue
@kiwiworkshop
8 ай бұрын
@gazuaaaa4840 luthiers will always glue the joint too
@joeblow9180
Жыл бұрын
Unnecessary
@georginaholliday3631
Жыл бұрын
If anyone else thought that the glue was smth else 4 a sec- Uhmm Blow up my phone because I want to see how many other people thought that lol 😅
@CLove511
11 ай бұрын
Literally nobody thought it was mayonnaise
@math64000
8 ай бұрын
useless
@rufusspradley3203
Жыл бұрын
A waste of time, seems light duty.
@richardwisdom9689
11 ай бұрын
For those guys who will be killed in the Russian-Ukrainian war, this video will not help “unthinking tree planers” tomorrow?
@user-yu4hn6my2o
Жыл бұрын
あなた この丸釘 効いてないから Tの頭から丸釘普通入れるでしょ
@heinzbecker8832
8 ай бұрын
The joint is useless garbage
@kiwiworkshop
8 ай бұрын
Try saying that to a luthier, they use this joint all the time!
@benji3900
Жыл бұрын
It's trash. Drilling those holes and adding those dowels does nothing for the strength of the joint.
@kiwiworkshop
Жыл бұрын
If there is tensile force pulling on the intersecting piece, the dowels will add strength. This joint is often used by luthiers to lock the guitar neck into the body. It's very useful for this purpose and certain not "trash".
@pakde8002
Жыл бұрын
Thats a very subjective and not particularly useful comment. Or what you might call a "trash comment"
@bo4Elite
7 ай бұрын
What’s the point!? Genuine question
@Kgrhj
7 ай бұрын
Terrible joint
@kiwiworkshop
7 ай бұрын
Try saying that to a luthier 😄
@lillyanneserrelio2187
3 ай бұрын
I call this "How to do more work than necessary" when you are paid by the hour
Пікірлер: 135