My current gauge is .10. Planning to upgrade to 13's, D'addario ez930. I have a solid acoustic guitar which is a Morris w30, basically a Martin copy.. It Looks exactly like that one in the vid but with neck binding. I'm afraid the 13's will cause issues because 10s-13s is gonna be a big jump. I dont even have these metallic toolsShould I go for it?
@RandySchartiger
6 жыл бұрын
I would recommend looking up your guitar spec before upgrading that much, every guitar is built with a specific gauge of strings to be used, just make sure yours is within the .013 range before upgrading, play it safe and not pull your guitar apart. good luck!
@japhetanciado7017
6 жыл бұрын
Well I contact the company but they do not respond but I'll still look for more infor about this guitar, thanks for the tip
@ohioguy215
6 жыл бұрын
Japhet...I agree 100% with Randy. I put heavier gauge on one of my previous acoustics and as he mentioned, it did the damage. Now I don't string any higher than 12-53's and I pay close attention as Randy illustrates in his vid.
@scottnorman408
6 жыл бұрын
I will add that when going to a heavier string gauge you should check how the string lays in the nut. Might have to get the nut files out and file refile the slots or replace the nut.
@Aaaa-kc3mp
6 жыл бұрын
Do you think a 9 gauge would sound good on a grand concert acoustic?
@efilnikcufecin9333
7 жыл бұрын
13-56's is all I will use . I love to hear the Bass on my acoustic. These are what I have found to sound the best. Great video, Randy. Thanks for sharing.
@RandySchartiger
7 жыл бұрын
I must agree they do make that top vibrate and come alive and lighter gauge just won't move the top the same. Thanks for watching mate!
@sotirzvanidjubre4109
2 жыл бұрын
Many dont just play 3 chords on first 3 frets by the camp fire. Try playing Tommy Emmanuels version of The Entertainer on a relatively cheap (800$) guitar with 13's? You'll lose your fingers. Btw the guitar it self makes a difference. Bass with 10's can be very strong on full size dreadnoughts for example.
@calmain13
2 жыл бұрын
@@sotirzvanidjubre4109 Tommy Emmanuel uses .012-.054 on all his guitars.
@G_Demolished
Жыл бұрын
@@sotirzvanidjubre4109 That’s hilarious. Watch some real bluegrass players. They smoke what you’re doing on acoustic.
@andrewbeattieRAB
3 жыл бұрын
EXCELLENT VIDEO AND “She ran calling Wildfire…” I don’t know how many decades it has been since I heard that song last. 🐴
@leftienigeblank4320
7 жыл бұрын
Hi Randy , for many years in the 70's / 80's I had an Eko 12-string ( made in Italy ) dreadnought . Man , that was really built like the battleship they were named after ! I sold it to a buddy , he still has it to this day , along with one of the early Takamines . The Takamine needs tuning every time you move rooms , the Eko just never budges a cent ! Cheers , Nige .
@LegsON
7 жыл бұрын
Oh man, I luv this channel! Nothing ground-breaking here, but I like your approach a lot.
@roberteweil
6 жыл бұрын
I have to use a lighter gauge because of severe arthritis in my thumbs. I use 10-46. It took some getting used to but I've learned to like the softer tone.
@johnwarner4513
5 жыл бұрын
With you there Rob, all hail to the subtle
@GRJ-uz7kf
2 жыл бұрын
Guitar makers design for an average player with relatively large, strong hands. If your hands are smaller, light-gauge strings are a blessing. For maximum volume, electronic amplification works wonders.
@bobeadgbe
7 жыл бұрын
hi randy. being the novice i am i first thought of lighter strings by diameter thinking the action would be higher. however as you explained the tension and its effects really drove it home to me. thanks again for another great video!
@RandySchartiger
7 жыл бұрын
Yep almost always whether you move up or down from the gauge your guitar is set up for will cause the set up to change, and if you move too much usually the guitar will need a completely new set up job done to it. Thanks for viewing Robert I'm glad the videos help.
@redflamered
5 жыл бұрын
Thank you. Changing from 9 to 8's. Great info from a pro.
@papawx3
7 жыл бұрын
I like "Bluegrass" gauge; light gauge on the bottom, mediums on the top three. Very versatile string set up.
@12Radius
7 жыл бұрын
Helpful man.most new matins are coming from factory with 12-54 lately I see.my Santa cruz got 12-53. 10's very light on that martin. peace.
@RandySchartiger
7 жыл бұрын
I've noticed newer Martins coming out with 12's on them and they are starting to recommend 12's now instead of 13's like before. Thanks for viewing man I'm glad the videos help! Cheers!
@RattlecanGuitarRestorations
7 жыл бұрын
Always good stuff coming from the House that Never Sleeps.
@RandySchartiger
7 жыл бұрын
Many thank yous brother! Never a dull moment here! lol
@robinbebbington7063
6 жыл бұрын
Being new to a steel string acoustic having just bought one this was quite useful. I have been playing a classical acoustic so no experience regarding the bridge lifting and neck relief changing. I will see how I go with the factory 12s which feel a bit heavy at the moment. When I need new strings I may go to 11s. Also might grab some feeler gauges.
@danieltrejo5115
4 жыл бұрын
I had the intention to change 12 for 10 in my Taylor and your video made me change my mind. Great explanation about what happens. Easy to understand.Thank you Randy.
@RebeccaHindle
3 жыл бұрын
I wanted to go from 12s to 11s I'm rethinking aswell maybe just changing the string brand instead I had it set up by luthier last year thoughts
@jayulreich1462
7 жыл бұрын
Started watching your videos today, because I saw a goofy face you were making haha. Turns out Ive been watching for hours now and learnin a bunch! From humidity to this, just a wealth of great info. This video is what made me subscribe. I recently bought an 8 string acoustic, the Agile 8x with fanned frets. It really is a great guitar. But the lowest string buzzes like crazy. Im going to put heavier gauge strings on it, I bet that solves my problem! Thank you so much. You rock!
@jonahguitarguy
7 жыл бұрын
This demonstrates perfectly why I try to move my customers into lighter gauge strings if they want to postpone a neck reset. Lighter strings= less tension, less tension= less body hump and neck relief and lower string action. Especially on non adjustable truss rod rigs. I personally use 10s cause I don't want to work that hard playing guitar. And if it's not loud enough I plug it in. I think we've had this sort of conversation before, that is, that for completely acoustic playing and jamming I agree you can't beat heavy strings. The 78 Martin reset I've started posting vids on proved to me how good a guitar can sound with heavier strings. A little long winded, sorry, Google video Randy.
@RandySchartiger
7 жыл бұрын
Yep lighter string definitely prolongs bellying up and neck resetting and in many cases completely prevents it. I have my guitars set up with .013-.056 and action set to where you can just breathe on it and make note because of my hands but still, playing acoustic guitar can become a very physical thing especially in bluegrass type music. Thanks for tuning in Dane!
@goldenoldiesmusicandfilm9373
7 жыл бұрын
Randy Schartiger hi randy im from england i own a epiphone texan inspired from this year its got 12 53s on it but id like jump up to 13 56 would i need to doing any ajustments or will i be ok not tweaking it????
@bobaldo2339
5 жыл бұрын
I normally use mediums on my guitars. But there are some guitars that seem to want to have lights (12's). (I know that sounds strange to say.) I have never tried anything lighter than 12's. All my guitars are large - dreads or jumbos.
@josejcastaneda5826
6 жыл бұрын
Thanks Randy. I like mediums for sure. But, they are harder on the finders. My new D16 said medium and came with the life span strings.
@eliasaasprong
6 жыл бұрын
Thank you so much, this really helps, I've been having a slight buzz on my D string since changing, without you I would have been shit out of luck.
@taxisteve929
6 жыл бұрын
When I was a kid in the mid-60s, all the kids had 14's...."heavy" gauge on their acoustics.....because the parents figured they would last longer. Cheap guitars + heavy strings = develop hand strength like the hulk from the impossible action!! I remember the first time I played 12s, I was fretting every thing out of tune because I was squeezing so hard. But with better guitars as I aged, and began having professional setups, I loved them....and with arthritis, the 12s are ideal for me.....if I play 10's, I can't even feel the top strings!! I have to look to see if my finger is even on the string. I also prefer small body short scale now, and you can go heavier without doing as much damage.....the shorter scale length makes a difference in tension too as you know. I can't imagine putting 10s on a Dreadnought, and definitely not a Martin Dreadnought, so assume this was just for education purposes. But I have seen guys who play electric do this, especially if they are used to 9's or something very light. As one person said, if you go lighter, you can plug it in, and I guess that is the way a lot of people think...but personally, I play acoustic to play acoustic.....not artificial sound. New acoustic systems are better than they used to be, but still have room to improve. Good video, thanks!!!
@brucelevine6517
5 жыл бұрын
I play nylon string classical guitar the problem is that low tension strings dont give sound I put some high tension strings on and the bow in creased over night you made your point excuse me while I change those strings to normal tension strings thanks this is the first video dealing with this issue
@burtcocain1986
4 жыл бұрын
I went up 2 gauges yesterday on my solid top acoustic. I adjusted the truss (a little too much) and strung it. There's a slight deadening on the 12th fret on the low E but it's mostly fine. Tiny bit of buzz that I can more than live with. Know what I learned? Heavier strings move less but the wood moves more. The strings sustain better and the wood sings. They're easier to fret now, because of the truss adjustment. Wish I'd done it years ago.
@myacousticblues
7 жыл бұрын
Great info Randy! Thanks! I use extra light strings on alot of my guitars and I've had to change the set up on almost all of them when I dropped down!
@RandySchartiger
7 жыл бұрын
Yep almost every time the gauge of string it changed the set up will need tweaked, some of those old Harmony's and other that were built like a tank don't move as much but the didn't sound too good because they were built so heavy. Thanks for watching mate!
@HeROsiNhEaVeN
7 жыл бұрын
I use 10's on an inexpensive Korean acoustic ( Antares ) from the 80's that I picked up at a garage sale for $30 and is built like a tank and came with a bone nut and saddle....it seems to agree with the lighter gauge and didn't lose much bass....but the action seems to lower itself from time to time when it's not in use so I have to adjust the neck a little...the lighter gauge in my opinion are easier on the fingers as well....I use Martin SP bronze...I swear by them....and Thanks for the big laugh once again!
@riztaurolatino4475
7 жыл бұрын
Everything well explained , Thanks for The experiment Randy , now I know why mine is buzzing ...
@dbminor9694
2 жыл бұрын
Very informative video Randy ! I loved it 😊
@ronperry9904
8 ай бұрын
This is the video I’ve been looking for thanks man
@michaelmontavon2472
6 жыл бұрын
Holy $h!t Batman!!! OMG!!! Thank u so much Randy. I've been up for 48hrs straight trying to figure out what was going on with my RG421CW Ibanez electric LOL. Switched from 9.5's to 9's and low E would not intonate for nothin' LOL. I had the concept backwards. Thank u so much my fellow musician!!! For Some reason i thought it'd b the other way round with the relief and the drop in gauge 😂. Keep doing what ur doing man.🖒 It helps us who are a little slower, to figure it out so we don't screw up and damage, destroy, or get rid of a decent instrument. Thanks again man!!!🖒
@RandySchartiger
6 жыл бұрын
thank you for watching brother! it's always good to hear my videos help! yeah it's easy to get some thing backwards and that can really make it hard to figure out what really needs to be done. good luck mate and happy repairs!
@MichaelQuinlan207
7 жыл бұрын
Great Information Randy. Thanks for taking the time to do that. Cheers
@JennysCountryChannel
7 жыл бұрын
Another great video, Randy! :-) Awesome how Q-Ball directly starts. Her ears got up when you made that face with the hands up :-) So cute .
@RandySchartiger
7 жыл бұрын
hahaha she knows when it's show time! lol I honestly think she know when that red light on the camera comes on it's getting close to a good time. :) Thank you Jenny for checking out the video!
@Zoso981
2 жыл бұрын
I only play electric guitars, but I've noticed that even changing from .010 to .009 will change the neck relief sometimes. Even in my big, fat, heavy Les Paul.
@morbidrockgod
6 жыл бұрын
Thank you for posting and sharing you knowledge!
@wj9518
3 жыл бұрын
I want to change from 12s to 11s by myself for the first time. Im so nervous. I hope it all went well and i dun need extra set up
@thrasher305
4 жыл бұрын
Thank you for the video. I was fighting my guitar wondering why my extra light gauge was buzzing all around the neck. Thought maybe I put the bridge pin wrong but know it needed some adjustments in the truss rod. Not enough sustain in the sound either so I reverted back to medium gauge.
@RandySchartiger
4 жыл бұрын
Glad it helped! thanks for checking out my videos!
@loucapilla840
3 жыл бұрын
You might want to loosen the trust rod a bit (counter clockwise) after changing to lighter gauges as the stings doesnt have the much higher tension/stress produced from your previous medium gauge so it backbowed the neck thus the string buzzes
@AlbertD711
7 жыл бұрын
Great video Randy. Thanks for explaining this.
@AvaPxiaO
7 жыл бұрын
This physics problem on @2:12 is very hard. If we remember the measurement @2:12 and write it down, on our time, and at @5:00 we have to remind you of it on your time, at what warp speed must we travel? Einstein are you there? Spok, anyone, ...? Hold'on!
@CesarAllGuitar
7 жыл бұрын
I always do 11 or 12's in all my acoustics... 12's in the ones I do most of the fingerpicking... 10 is too thin to my taste in an acoustic guitar... Cheers Master! Thumbs Up!
@RandySchartiger
7 жыл бұрын
I played on .012-.054 for a long time and finally tried .013-.056 and loved the way they make the top vibrate so stuck with them and set my action extremely low because of my hands but if I didn't have this hand problem I probably would still be on the lighter strings. Thanks so much for stopping in Cesar and for your continued support is greatly appreciated!
@fernandogumba152
5 жыл бұрын
Hello Randy, my name is Foy Gumba from Saipan, Northern Mariana Islands.Your video on guitars acoustic and electric are worth more than the $5.00 subscription.I recently bought a used Wood Song Dreadnaught JCE-NA. I want to change the strings on the guitar. The person I bought it from never changed strings. the set I want to useElixir 11-52 Phosphor Bronze. Am sure I will have to make some adjustment on the neck.Too much relief on the 12 fret
@tdkrei
6 жыл бұрын
Nice work Randy I'll give that stuff a try on a couple of guitar s that need attention. I am using Mequires fine scratch polish for many final polishing on pens and some furniture projects, but I will try again to find Simichrome in stores in town before using the damn internet again. Also thanks for the tip on humidifying and boiled linseed oil, I know all my axes need both.
@PaArmyVet
7 жыл бұрын
Good tips Randy. I tried xl's on mine in the past and went back to reg lights & Light mediums now. Surprisingly after awhile the light mediums became easier to play after I set my relief properly. Live & learn I guess. Now, if I can just learn to play better LOL
@RandySchartiger
7 жыл бұрын
Yeah I have .013-.056 on my dreadnoughts and have the set up much like an electric guitar, I guess once you get used to them if they are set up properly they do seem very easy to play. Thanks for tuning in!
@miamistomp
7 жыл бұрын
10's are usually marked extra light
@RandySchartiger
7 жыл бұрын
I was surprised they didn't mark it on the package, after I opened them I saw it. Cheers!
@benaaronmusic
7 жыл бұрын
They should call you the mad guitar scientist.
@RandySchartiger
7 жыл бұрын
hahaha that's a name that would fit! :)
@benaaronmusic
7 жыл бұрын
Randy Schartiger always entertaining and educational, Randy. :)
@simosalexiadis3437
5 жыл бұрын
Oh man what an ending to the video!!!hahaha. lovely dog!
@RandySchartiger
5 жыл бұрын
lol thanks for watching mate! cheers!
@bearjmu
7 жыл бұрын
What an informative video...I am always scared to change the gauge on my Martin.
@RandySchartiger
7 жыл бұрын
It can change and even damage your guitar if you go too far in changing gauge. Thanks for checking out my video!
@christopheranderson1968
2 жыл бұрын
I've currently got 12 gauge on my acoustic. Will it cause any problems changing to 11s? They've been on a week. Will it cause problems if I change now? How about if I wait a while? Most advice says it won't.
@daverenick5830
Жыл бұрын
I have come to hate Martin guitars if they are made after 1968. i have owned ( Martins, 8 of them 1936 to 1963, and they were all great. I recently bought a 000-18 MD to get something different from all the dreads and the neck is awful. The current 1 3/4 nut width feels like 2 inches and the bizarre shapes of the necks they are using now is hideous. You need a vice grip to play any full or partial chord. I have taken the saddle down twice and use 10 gauge and still need to use massive strength to make chords. I never have this problem with Gibson or even some cheap guitar I own like Takamine and Silvertone. 10 gauge strings sound like crap on any acoustic and I don't like going under 12. You would think when you spend $4000 on a guitar it would be playable. With inflation you need to spend 6 figures to get a great guitar. You can get a perfectly good guitar for $150 that will sound every bit as good as a $10,000 guitar, and be easier to play.
@ianson3
5 жыл бұрын
Really helpful, thanks for the advice.
@joemcgraw5529
5 жыл бұрын
I really like this video randy because i did this to a cheap guitar i got ,when i changed to 10s same thing lower action but no buzzing ofcourse the neck relief was probably a little to much ,I used GHS ultra lights same thing as those gauge wise be nice if someone stepped up the bass strings a little ,but what I noticed was how much easier it played but yours compared to this 1 is night and day but a guitar with bridge bulging issues would benifit from the lower gauge ofcourse
@blkjckgtr3075
7 жыл бұрын
Makes perfect sence and thank you for the Q-fix!!Hooold!!Onnn!! Cheers
@RandySchartiger
7 жыл бұрын
haha Q-ball stole the show! :D Thanks for checking it out brother! Cheers! Hold on!
@jjccllgg
5 жыл бұрын
ARMY STRONG!
@darrenw.taylor2084
6 жыл бұрын
Great video! Especially the very end....LOL.....Love it!
@ScreamingReel500
4 жыл бұрын
It depends on the tone of the guitar that you want to achieve, the main reason. Then you have the guitar that is picky of what brand, then the gauge (saddle and bridge material to be considered). Unless you have at least 3 brand and 3 gauge of each brand to experiment with, you can not find the tone that you are looking for. As the saying 'you got what you paid for' hold some truth. premium brand is of high quality than generic ones, but not all premium will work with your guitar. The nylon classical guitar will take up to 2 weeks to fully stretched and every time you play you need to tune it, not like the steel string guitar it will settle in 24 hours. Other factor is how easy to play with the harder string, especially the acoustic guitar. You can't play if the string hurts your fingers. That is why the guitar at the store sounds better than the one you just replaced the string. You should ask the sale clerk or check the website of the guitar to see what string/brand they put on your guitar if you are buying new one. Best of luck.
@tattyfowl
7 жыл бұрын
Makes sense. Interesting video as usual - saves me having to do it. I'd never put 13's on though as 12's hurt enough :) I use D'Addario 10's easy to play and my very solid old Eko Ranger sounds great. Cheers
@thomastommy1192
7 жыл бұрын
A great video. I am so glad you did this video. I will save it. If you remember I have ask you for advice on this subject. Thank you for sharing your video.
@RandySchartiger
7 жыл бұрын
Yep I remember. I am happy to hear the video is helpful, thank you my friend for checking it out. :)
@joq702
Жыл бұрын
Randy - excellent once again. I really enjoy your work, advice, and especially the humble, goofy sense of humor. It’s my preference. I’m currently fixing up a 1980 Yamaha FG-331, which is in mint condition other that the belly bulge. It is an all laminate guitar, grand concert size. It recently had lights (D’Addario XS 12-53 PB). I am going down to extra lights 11-52. Because it is a laminate and not an all solid wood or even soundboard being solid, in your experience, will there be any noticeable change in the sound? I would think minor if at all. My action is way too high now with the lights (12-53) as the belly bulged and I am installing a JLD Bridge Doctor first before the strings go in. The neck is straight and no twists in it. It should come down 2 - 2.5 mm on the saddle end once the top becomes more flat I’ll let it settle a day or so, put on a few old strings to see what the action is at various points. I can then put on the new strings and tweak the bridge doctor device again. Any tips to the planned order or other steps would be helpful. Keep up your work. You’ve become the equivalent on KZitem, of that guy named Scotty (Rev Up Your Engines) for real-world guitar repair tips and practical approaches to repair. You are not overly technical or stuffy. Much appreciated.
@CJ-rf9jm
7 жыл бұрын
Good stuff as always. Heard some blackberry blossom in there too n you can play it a lot faster than I do.
@RandySchartiger
7 жыл бұрын
Thanks mate! Yeah I used to be able to smoke Blackberry Blossom but with my screwed up hands now it usually smokes me! lol
@CJ-rf9jm
7 жыл бұрын
Randy Schartiger You still make it sound good.
@dalepal
7 жыл бұрын
Most new acoustics come with 12’s like mine did. I use the recommended gauges except switched to extra lights on one guitar that is nearly 50 years old.
@RandySchartiger
7 жыл бұрын
Yeah even most Martins now are coming new with 12's instead of 13's like they used to do. Going down in gauge is definitely safer than going up especially on very old guitars. Thanks for viewing my friend!
@LVGaryD1
7 жыл бұрын
Damn. now I'm all screwed up. (Well, of course I am screwed up this time of night, but that is self-induced.) My extra-light strings (Elixir poly-coated) buzz too and I thought my action was already too high. I just bought Elixir medium-gauge thinking it would help the buzz, but now you have me afraid I won't be able to fret the strings very good because my left hand is weak from an old broken neck injury. Makes no sense to me that my action is too high, but the strings buzz.
@RandySchartiger
7 жыл бұрын
With high action and still buzzing it sounds like either your first fret nut action may be too low or the truss rod needs tweaked to get proper neck relief. I'm usually like that around that time of night too, lol and also self induced! =D
@LVGaryD1
7 жыл бұрын
I wish you were in Las Vegas!
@mikiegood
7 жыл бұрын
Very interesting. Thank you Randy
@RandySchartiger
7 жыл бұрын
You're welcome Michael, thank you for checking it out.
@brandonlievano1329
4 жыл бұрын
Hey Randy very informative video! I was hoping you could shed some light on my current issue regarding the matter of putting lighter strings on my acoustic. As it stands, my guitar has 12s, the intonation is fine but the action is a bit high, but not too bad. I'd like to switch to 11s, and was going to get my guitar set up at Guitar Center, but the tech told me that my guitar would require more work than a standard set up. Thing is, I don't have the money to pay for more extensive service to my guitar, much less to buy a new one. Will my guitar be significantly affected for the worse if I go ahead and place the lighter 11s without making any adjustments to the set up?
@RandySchartiger
4 жыл бұрын
lighter strings pulls less stress on your guitar, so in theory should lower your action a bit, dropping from 11's to 10's you probably won't have to do a thing, it sounds to me like the guy was just trying to charge you more money. thanks for checking out my videos!
@brandonlievano1329
4 жыл бұрын
@@RandySchartiger thank you for the reassurance!
@craigkennedy1093
Жыл бұрын
Never get a set up at guitar center. If you are uncomfortable doing it yourself go to a local music store or Luther. Chances are you will get the owner or someone with 30 years experience rather than the first 20 year old kid who kind of knows what he is doing to walk into guitar center. You can get your action as low as 2.0mm, get a luthier string action gauge check the height at the six feet, let's say it's high and is at 2.5mm, meaning you can bring it down .5mm, the formula is sand half the desired height you wish to have subtracted from the height of your action from the saddle. So in this case you would sand .25mm from the saddle. It's pretty simple, but it's also not worth messing up a nice guitar if you are uncomfortable. Check out some videos on sanding the saddle to lower your action
@oliverk191
4 жыл бұрын
Changing from 13's to 12's not such an issue but that is one big drop in tension!
@cuntrydude1
7 жыл бұрын
Great stuff again, Randy, I prefer mostly 12
@RandySchartiger
7 жыл бұрын
Thank you Wank for viewing! Your guitars probably will last longer with 12's.
@iainbrennan5606
7 жыл бұрын
What I thought,I had 13's on it originally,bit too heavy for me though,now I've got 10's on and their a bit too light for my liking,thanks for your input.
@RandySchartiger
7 жыл бұрын
Maybe try 11's or 12's, 10's are too light for me too. Thanks for watching.
@steveharris2589
7 жыл бұрын
Good video Randy, I use light on all my guitars. I would be careful to put 13s on a new guitar now days!!!🎸🎸🎸👍🏼👍🏼👍🏼😊
@RandySchartiger
7 жыл бұрын
I use .013-.056 on all my dreadnought guitars but you're probably right about putting that heavy of string on a new one, they are building them very light these days. Thanks Steve for tuning in! :)
@CristinaS
7 жыл бұрын
Interesting video and nice playing, Randy :-) Have a great day, my friend! Cristina
@RandySchartiger
7 жыл бұрын
Thanks so much Cristina for tuning in and commenting is always very much appreciated! :)
@pierremcnicoll9938
4 жыл бұрын
Did it affect the intonation? And if it did, after adjusting the rod would the intonation be back to where it was?
@johnryndfleisz6482
3 жыл бұрын
Yea, now i get it. I just put light gauge strings on my old Guild Dreadnaught. It sounds like crap!! Tinny, buzzing. putting heavy gauge back on.
@Ravenscaller
2 жыл бұрын
Generally you need to let a guitar sit for at least a day to get used to the new tension. I'm surprised you don't know that all D Martins ship with 12-56. The worst that is going to happen going to a lighter sting is that they will buzz. Did you check that the body isn't pulled up at the bridge? The truss rod is set for the strings martin ships it with. I wouldn't touch the truss rod unless that was a problem. Go back to 12s and work the guitar around that not the other way around.
@harryodum5598
7 жыл бұрын
Good info Randy Thanks
@msapostle
7 жыл бұрын
Great explanation Randy...ty.
@RandySchartiger
7 жыл бұрын
Thanks my friend for viewing!
@roberthancock2563
6 жыл бұрын
Great video,Randy! I use the Daddario .012- .053 80/20 acoustic strings. What's your opinion on Yamaha acoustic guitars? I might get one soon.
@roberthancock2563
6 жыл бұрын
Randy Schartiger Thank you!
@alamosabill201
7 жыл бұрын
Good information Randy. ☕️
@RandySchartiger
7 жыл бұрын
Thank you Simon, amazing how a set up can go right out the window on some guitars when changing gauge.
@ERIC-65
5 жыл бұрын
Had the experience that light strings give it a type of "dobro-sound".
@mikemagnum7987
7 жыл бұрын
Thank you Sir Randall of the HTNS.... My little "chibanez" came with 11-52s and has a nearly spot-on set-up right now. I'm not sure about the quality of the nut and saddle that came on it, but she sounds pretty good to me. If you have the time to answer this kind of question, I would appreciate it. What might I expect to happen with my sound/tone if I were to go with TUSQ in nut and saddle along with a set of 10-48s in a coated string? If I had another guitar, I would go on and change things out but this little "chibanez" is the only git-fiddle that I have right now!
@RandySchartiger
7 жыл бұрын
Well if it's a plastic nut and saddle you'll see a huge difference in tone and volume, if they are bone you'll still see a big difference, usually if a guitar already has a lot of bass then tusq will bump that up a notch but going down in string gauge would decrease the volume because they wouldn't make the top move like heavier strings do, and smaller strings will add highs and maybe a little more mids. I hope that makes sens lol thanks for viewing mate!
@josephm.noviello1996
Жыл бұрын
Good info.
@pete9639
6 жыл бұрын
Hey Randy, I dig your video's man! I'm a flatpicker and use primarily my D-28 with 13-56 gauge strings. I just picked up a used 000-15sm and want to use the same gauge as the D. I'm getting answers on line all over the map! yes,no,yes,no, blah blah blah! So I'm asking you. I think it's ok as long as you keep an eye on everything. What do you think? Thanks brother!
@RandySchartiger
6 жыл бұрын
000-15sm is a 12 fret body joint guitar, this means it's a shorter scale and that means string tension will be much less than that of a 14 fret body joint, so you will be fine as wine with .013-.056 gauge. :)thanks for watching brother! rock on!
@pete9639
6 жыл бұрын
Thanks man! One of the reasons I like you is you ALWAYS answer a fellow guitar geek back. Very cool!
@RogwinMusic
3 жыл бұрын
Love your style man, you know your stuff....wish we could hang out in that shack and BS and jam a little, Hope you're OK haven't seen you reply in a while......God Bless
@philmiller99
7 жыл бұрын
Hey man. I really appreciate your videos'.
@guitarstruggles3140
7 жыл бұрын
Good video man! I always go with the recommended gauge. How's that new right hand picking technique working for you? I've been switching mine up and it's giving me fits! Rock on brother!
@RandySchartiger
7 жыл бұрын
That's a very good idea and your guitars will hold together much longer. This new right hand technique is kicking my ass! lol After I've played for an hour or so it finally starts to feel right but I'm a loong ways from getting it down yet. Thanks for stopping in brother!
@ahhimary3475
Жыл бұрын
Is there way to find out the guitar strings gauge if it is not written on the packet?
@turnerthemanc
Жыл бұрын
Micrometer or vernier caliper, or as we called them when i was in engineering, a very-near caliper
@RandySchartiger
Жыл бұрын
Micrometer as mentioned, you can measure your string with that. Thanks for viewing!
@yessure5291
6 жыл бұрын
Won't a slightly thicker saddle make it right ? Maybe 5 thousands thicker.
@bobaldo2339
5 жыл бұрын
Normally when I change the gauge of strings I have to adjust the truss rod a little. No big deal at all.
@DanteLikesRock
3 жыл бұрын
haha that ending is hilarious
@LouieSalumbre
5 жыл бұрын
Does changing string gauge make a fret buz? And also a old string can cause fretbuz?
@JohnS-zq8ks
7 жыл бұрын
Makes total sense: thanks.
@ngzcaz
7 жыл бұрын
Why do those new strings sound dead ?? Buzzing is one thing, dead sound is another..
@Plottman
Жыл бұрын
So if I went to 14 / 59 would that damage my guitar? It’s got 13 56 on it now
@RandySchartiger
Жыл бұрын
I would never recommend heavier than .013-.056 on any guitar. Thank you for checking out my videos and commenting.
@RosaStringWorks
7 жыл бұрын
Good information Randy. Light strings sound wimpy... I don't do wimpy. lol
@krustybuzzard2477
7 жыл бұрын
My wife says I'm playing to loud anyways maybe she won't dollar about not being able to hear the tv if I go to lights.lol I only play in my bedroom anyway so the volume isn't a problem if it's a little lower.
@RandySchartiger
7 жыл бұрын
They do! lol I go with .056 as my low E but know that Tony Rice uses a .057! That would really make a top move! Thanks Jerry!
@krustybuzzard2477
7 жыл бұрын
Jerry what do you think of those bridge des? Have you ever messed with them?
@RosaStringWorks
7 жыл бұрын
des? Sorry not familiar with that.
@krustybuzzard2477
7 жыл бұрын
Rosa String Works that was supposed to read bridge dr.i have a slight belly bulge in my 57 model d28 Martin it's not bad enough to need a neck reset .
@CrawfishParish
7 жыл бұрын
Again a great Video..
@RandySchartiger
7 жыл бұрын
Many thanks my dear friend for stopping in!
@stephengent9974
7 жыл бұрын
What about scale length? That will make a difference also. Where the fretboard joins the body 12 or 14th fret. So some differences there. I don't like strings that are too light on acoustics. I use 11 or twelve gauge. They sound good, and I can still bend them when I want to. I have got low tension silk and steel Marquis on my Big Baby Taylor, but they are a bit too low for me. They are easier to play though.
@RandySchartiger
7 жыл бұрын
Yes! Scale length matters! Short scale guitars will have a lot looser string tension than long scale if the same gauge is used on two guitars of long and short scales, so with a short scale you probably would want to go with a heavier string than you might think to get the feel you want.
@timeWaster76
Жыл бұрын
going down in thickness is not the problem going up is
@superpianogirl
7 жыл бұрын
Dude..You Da REAL Guitar Man for sure Brah!! really your a wealth of knowledge !!!! thank you. great video here on the string change effects. What would you do with this martin to get it to eliminate all that fret buzz besides putting the medium 13/56 strings? thx in advance . i ask because i have the same problem on my martin
@RandySchartiger
7 жыл бұрын
Thank you Superpianogirl! One way to ease fret buzz is adjust your truss rod to put a slight bit more relief in the neck, if it measure .012 maybe set it at .014 and see if the buzzing is gone. Many thanks again!
@superpianogirl
7 жыл бұрын
Super Cool!!!
@minder4u1
6 жыл бұрын
why didn't you go to 11's? from 13 I think the 10s are too light and usually best for nashville tuning or 12 strings
@maptrking
7 жыл бұрын
HAHAHAHAHA.... without even watching your video .... I subbed ... simply cuz you seem like a cool musician!!
@laddsbanks493
7 жыл бұрын
Bin' doin' a lot of utubing ,vis-a-vis, guitar setup, repair, etc., etc., i.e., Luthiering :-0...by far your site is thu' mostust funust I have had in my wanderings...and I lurn'd stuff tu :-). Accolades for the time, effirt an competence that you invest and express in your very entertaining and informative video's...soon as I git some muny...I'll reciprocate :-). Kudos. Btw...what part of the country do you hail from..or currently hang in?
@RandySchartiger
7 жыл бұрын
Thanks so much for your kind words and thoughts my friend, mucho appreciated! :) I'm in the eastern part of the states, WV to be exact.
@SpiritualOnslaught
7 жыл бұрын
i think you should put extra heavy bass strings on it! XD \m/
@TheDrgreenthum
Жыл бұрын
I'm curious what your trying to put forth here. The nut establishes the plane so if you have a thinner string you will undoubtedly be closer to your frets to an extent dependant on the adjustments made. So u know I'm not done with your video but I'm curious what you are showing us here...
@TheDrgreenthum
Жыл бұрын
thicker strings make more tension
@AmIonArock
6 жыл бұрын
I try to support KZitem and will patiently watch "A Short Commercial* but I was very close to giving a thumbs down for reason of SO MANY COMMERCIALS. You seem like a good guy but I was to distracted and lost attention I could not finish video. Just wanted to know the answer my question. If I switch from 9's to 10 or 11's, will guitar become sharp or flat?
@d3et1roi3t
5 жыл бұрын
Randy I cant find the right strings. I've recently strung up the 12-53 stock gauge nanowebs. The D
@RandySchartiger
5 жыл бұрын
check those two strings at the nut and at the saddle and make sure they are fitted into the slots tight, you may need to move up to a med gauge .013-.056 to get your top to vibrate more, sometimes it takes this to get the guitar top loosened up and moving properly. thanks for watching!
@stephentyndall159
6 жыл бұрын
Hi Randy, love your channel. There's a really cool vibe with your videos, it almost feels like we're actually sat in your workshop. I know that this is quite an old video but I'm thinking of swapping light gauge to medium on my dreadnought. I'm confident of adjusting the truss rod but I've heard some people say I might need to make the nut slots bigger. Is that true? I don't really want to start messing with the nut, could get messy. Thanks.
@RandySchartiger
6 жыл бұрын
the nut slots should be gauged to the size string you're using, if you do switch try tightening and loosening the new heavier gauge strings a few times, this will wear out the slots to the proper size, if you ever want to go back to light gauge tho you'll have to fill the slots and re-file them to the proper gauge.
@stephentyndall159
6 жыл бұрын
Randy Schartiger Thanks for the reply Randy, I know how busy you must be and I appreciate it. I changed them and so far no problems. In fact, the guitar has come alive! More bottom end and resonance. Thanks again Randy.
@coysmorris72
6 жыл бұрын
Hi I just got a Yamaha LL16 Dreadnought Acoustic guitar its all solid wood with a solid Spruce top an solid Rosewood back and sides and with a 5 piece mahogany neck it got a set of Elixer 80/20 Bronze nanoweb 11/52 on it I'm a rhythm guitar player like to pick an strum too I like put a set of Medium/light gauge strings on it to give me more sound I know haft go to a music store get the neck set up for this have you try medium/light gauge strings on your guitars did it give you more sound I been use to useing Elixer light-gauge strings for years I thought since I got me a solid wood guitar I want to try medium light gauge strings on it if don't put them on I'm looking at these Elixer 80/20 Bronze 13/53 Hd light gauge strings not for sure I'm puting them on my guitar have you done any reading on these or have you try them just seeing what your opinion on them think you Coy Morris
Пікірлер: 269