I was so impressed with the level of detail....no cutting corners, even on small things. If only people had this level of integrity in their craft.
@AmericanRadonMitigation
2 жыл бұрын
😊 Thanks for the kind words!
@grantinfo5165
22 күн бұрын
Jessie excellent, step by step video of how to install. Really enjoyed it. This is helpful to decide what Radon mitigation contractor to hire and the questions to ask. Particularly interested with how to drill the test holes and then how the suction actually works. I have decided that the noise suppressor is definitely worth it. Shorter videos are great but you really needed a video of this length in order to show the entire job from start to finish. 😇
@chrisjones6610
3 жыл бұрын
Honestly one of the most precise, and informative content videos I've had the pleasure of watching start to finish. Well done!
@AmericanRadonMitigation
3 жыл бұрын
Thank you for the kind words, Chris! Are you a radon mitigation contractor?
@TheLeesto
2 жыл бұрын
I know. I've been having high radon issues in CO and the folks here are not able to reduce it down very much at all. Very low tech approaches like using lighters instead of manometers to test for suction....stitching would probably blow their minds. Wish this guy could make a road trip!
@stevephla
2 жыл бұрын
Nice to see such professionalism. One of the best mitigation videos I've seen.
@StevenDuktig
Жыл бұрын
You have the best, and informative videos, and I have no problem watching longer, more informative videos.
@AmericanRadonMitigation
Жыл бұрын
Thanks for the feedback, Steven!
@thomast8553
3 жыл бұрын
The quality and quantity of the work here is amazing. The work I had done by local contractors had non of this. No test holes, no going through the attic, did not need stitching but I can’t believe they would go through the trouble. I wish you were in NJ to solve my difficult vapor intrusion problem the right way
@AmericanRadonMitigation
3 жыл бұрын
Thank you for the kind words, Thomas. I believe you are the first person to mention vapor intrusion in the comments. Could you tell us more about your situation?
@jseppe71
Жыл бұрын
Great work! I love your attention to detail and explanations. Short videos are good but I *really* enjoyed watching this longer video as well.
@AmericanRadonMitigation
Жыл бұрын
Thanks for your feedback, Joe!
@spike1817
Жыл бұрын
Longer with more detail was fantastic! This answered a lot of questions and I love all the tips and tricks you include.
@AmericanRadonMitigation
Жыл бұрын
Thank you for the feedback, Jesse! We have a three-part video starting in December that you may enjoy.
@wegeo
3 жыл бұрын
I liked this video and the level of detail provided, especially around what you feel is a good suction level and how that drives fan selection. Thanks for these videos as a homeowner I have learned a lot and it helped me reduce my home radon level greatly.
@AmericanRadonMitigation
3 жыл бұрын
You are welcome! Can I ask where you are watching from and what your radon levels were before and after mitigation?
@thomast8553
3 жыл бұрын
@@AmericanRadonMitigation my home has a basement and two smaller crawl spaces, the first of the two installed by the original owner. There was a SSD installed that covered the basement slab (1,600 sq ft) and newer crawl space (300 sq ft). The high suction fan produces -.024 inches at two furthest points on the slab and -.01 inches at three locations in the basement slab. I still have vapor coming up based on my feeling and breathing it. The remaining 115 sq ft crawl space is still not depressurized and I was wondering if I could rig a temporary fan to an existing sleeve which connects to a pit. Are there such fans available which would allow me to creat a vacuum under the slab and evaluate how much suction it produces. I have course sand under the slab.
@AmericanRadonMitigation
3 жыл бұрын
Hey Thomas. It's hard for me to give advice without more information and without being able to see it. We do offer consulting services via Google Meet, FaceTime, Google Duo, video, and email. The cost is $250 for each hour. We also rent measurement instruments that will allow you to pressure field extension, CFM, and static pressure. Give us a call at 612-474-1004 if you'd like to set up a consultation.
@ivavossi
Жыл бұрын
Your videos are incredibly perfect and informative. Excellent work
@AmericanRadonMitigation
Жыл бұрын
I appreciate that, David.
@denisbreland2289
7 ай бұрын
this is the best instructional videos ive seen,,, absoultley great workmanship
@AmericanRadonMitigation
7 ай бұрын
Thank you! Glad you enjoyed it!
@CovertGamingET
2 жыл бұрын
Awesome video! The information and diagnostic explanations are extremely helpful.
@AmericanRadonMitigation
2 жыл бұрын
I'm glad you found it helpful, Erik! You'd love the KSU OMAD course.
@CovertGamingET
2 жыл бұрын
@@AmericanRadonMitigation Definitely! I hope to take the OMAD course at some point.
@nutsbolts625
Жыл бұрын
These videos are so helpful. I have not seen anyone as through as you.
@AmericanRadonMitigation
Жыл бұрын
Thank you. Check out Colin Dumais with Radon West in Canada. He's a wealth of knowledge! Here's a link to their continuing ed page. cnrtc.teachable.com/courses/category/Continuing%20Education
@tracker335
7 ай бұрын
This guy is the best at the business ! A well deserving Subscribe !!
@AmericanRadonMitigation
7 ай бұрын
Awe, thank you! We certainly aren't the best; however, we are always trying to get better.
@jimberk4651
4 ай бұрын
great video, more detail is always preferred.
@AmericanRadonMitigation
3 ай бұрын
Thanks for the feedback!
@nowanda2nd
2 жыл бұрын
Great video! Thanks for taking the time and effort in such awkward climate to get all those details covered. I would prefer detailed videos regardless of the length.
@AmericanRadonMitigation
2 жыл бұрын
Yes, attics aren't an easy environment to film in. Thanks for the feedback!
@SubaruWRXStiYamahaR6-AllGone
2 жыл бұрын
Longer, detailed, just like this video, was awesome!
@AmericanRadonMitigation
2 жыл бұрын
Awesome, thanks for the feedback, Anthony!
@JenniferThorne
8 ай бұрын
I do like the longer content. Thanks
@AmericanRadonMitigation
8 ай бұрын
Awesome, thank you!
@user-gn5bm2vr1l
6 ай бұрын
Excellent video. I prefer longer over shorter. Thanks
@AmericanRadonMitigation
6 ай бұрын
Thank you, and thanks for your feedback!
@kenkeierleber1098
Жыл бұрын
Great video! Excellent detail in information and installation. Thank you.
@AmericanRadonMitigation
Жыл бұрын
Thank you, Ken!
@annorlundating1125
8 ай бұрын
Oh man... can you please come to Sweden and fix my radon home from 1935? :( The level of detail and knowledge is great.
@AmericanRadonMitigation
8 ай бұрын
That sounds like a fun trip!
@peterchaploutskiy2555
3 жыл бұрын
@American Radon Mitigation thank you for the detailed video and quality of content appreciate all your work! Same as wegeo home owner but in process of putting together system. current level around 6-7
@AmericanRadonMitigation
3 жыл бұрын
My pleasure, Peter. Where do you live? Be sure to keep us posted on how it turns out.
@peterchaploutskiy2555
3 жыл бұрын
@@AmericanRadonMitigation I am in NJ. Yes, will do
@johnwhite2576
2 жыл бұрын
owners are concerned about a level of 1.3 ??
@AmericanRadonMitigation
2 жыл бұрын
We have some clients who chose to mitigate 0.5 pCi/L. They typically have friends or family members who have lung cancer and have never smoked. I would want the radon levels as low as possible for my family as well.
@halsmith7642
10 ай бұрын
How about just getting a Heat Recovery Ventilator system to get fresh air into the house and radon out?
@philippebelair3372
2 жыл бұрын
Very good job, well balanced , good solution well balance AAA +++
@AmericanRadonMitigation
2 жыл бұрын
Thank you, Philippe.
@romanvega5578
2 жыл бұрын
Jesse, Amazing video ! Thank you so much for the value that you add to the radon industry. Just to know , how much did you charge for this mitigation? I am a radon mitigator in Fort Collins, Colorado.
@AmericanRadonMitigation
2 жыл бұрын
Thanks, Roman! I have learned a lot the hard way and from many others in the industry that have graciously shared their knowledge with me. I’m happy to share what I've learned as I've realized that is how we will have the most significant impact. That's a big part of why we are now offering hands-on training. I met Seth Roberts at the radon symposium and found out he lives in Fort Collins. Have you met him?
@bobtreiber8556
2 жыл бұрын
Great video and high quality work.
@AmericanRadonMitigation
2 жыл бұрын
Thank you, Bob!
@davesmith913
3 жыл бұрын
shorts are good, but do like the longer more information vids for sure! 👍😁
@AmericanRadonMitigation
3 жыл бұрын
Thanks for the feedback, Dave. Do you think there would be any interest in watching the mitigation process from start to finish with minimal editing? Keep in mind, most of our projects take two days and filming doubles the time it takes to finish the project. If not, what parts would you like to see us focus on?
@goldistocks609
2 жыл бұрын
Idea, the last three nails on the roof exhaust flashing, before nailing the nail all the way in put the dab of caulk under the nail head, should form a better seal and protect it from UV light.
@AmericanRadonMitigation
2 жыл бұрын
I tried that for a few months, but it made a mess of the flashing and my hammer. I now put three dabs under the flashing where the nails will be.
@bjleau76
3 жыл бұрын
Longer video with this level of detail was outstanding…
@AmericanRadonMitigation
3 жыл бұрын
Thanks for the feedback. Only if I could afford to pay Danielle to follow me around with a camera while I'm working rather than spending hours filming myself as you saw in this video. 😄
@thomasgallo7150
2 жыл бұрын
When you have a test hole that does not suck, do you ever try opening things up with compressed air? ( This is an awesome video by a real craftsman. Thank you so much!)
@AmericanRadonMitigation
2 жыл бұрын
Thank you, Thomas. I have not tried using compressed air. I did see a product that does at the Radon Symposium, though. You can check it out here aircavator.com/
@Tenpennycustoms4958
3 жыл бұрын
Welp I asked too soon! Great video so far. -Logan
@AmericanRadonMitigation
3 жыл бұрын
Thanks, Logan! Do you prefer short overview videos or longer ones like this?
@Tenpennycustoms4958
3 жыл бұрын
@@AmericanRadonMitigation Either way. You do a great job explaining all your steps in great detail which is the most helpful. The longer ones are usually bigger projects but they’re all helpful.
@ScaesarBtech
Жыл бұрын
Hey, I just recently learned about radon and radon mitigation for the first time because my wife and I just bought our first home. Since then I have done A TON of research on it and trying to find a mitigation specialist. I've NEVER seen this much detail and knowledge from anyone in the business before. All of the 5 star rated mitigation companies in my area don't mention any of this, especially "stitching". I've been trying to get guys to come check out my situation to give us a price, and I even had one guy say over the phone "Every radon system is basically the same". I REALY wish you were in NJ. Do you know anyone that services NJ that would do a comparable job to you, or has even half the knowledge you have???
@AmericanRadonMitigation
Жыл бұрын
You could try reaching out to Charlie Gutridge. He is in Pennsylvania. Charlie was in our radon train course six months ago. Here's a big, scary looking link to his business. www.google.com/search?q=gutridge+inspections+radon+&rlz=1C1GCEA_enUS769US769&sxsrf=ALiCzsafdk0TNlZJKbwKU27L0etSJeWOrw%3A1666753072072&ei=MKJYY8H5A6uJptQPr_ClyAM&ved=0ahUKEwjB0aeG8_z6AhWrhIkEHS94CTkQ4dUDCBA&uact=5&oq=gutridge+inspections+radon+&gs_lcp=Cgdnd3Mtd2l6EAMyBAgjECc6CAgAEKIEELADSgQIQRgBSgQIRhgAUL9RWL9RYN63AWgDcAB4AIABdogBdpIBAzAuMZgBAKABAcgBBMABAQ&sclient=gws-wiz
@theelusive11
Жыл бұрын
@@AmericanRadonMitigationWho would be a competent Radon mitigation person in KY? Close to Louisville? We had a system put in. We were are 76 and now at 46. He just came in and cut two holes and put the system in. No testing like you have done here. So I am researching to learn before calling someone out again.
@AmericanRadonMitigation
Жыл бұрын
@theelusive11 I'm sorry that happened to you. Unfortunately, I don't know anyone in your area that I could recommend. We offer virtual consulting and rent diagnostic tool kits if you want to fix it yourself.
@brandontarr5418
Жыл бұрын
@42:04... Mind Blown!
@AmericanRadonMitigation
Жыл бұрын
The Shingle Shot? It's a cool little tool! amzn.to/3YV3J3J
@quintaju
Жыл бұрын
Well Done !!
@AmericanRadonMitigation
Жыл бұрын
Thank you!
@lloydsnyder2738
2 жыл бұрын
Very informative video.
@AmericanRadonMitigation
2 жыл бұрын
Thank you, Lloyd!
@mikemullenix6956
6 ай бұрын
I had no idea radon mitigation could be this involved and possibly expensive.
@AmericanRadonMitigation
5 ай бұрын
They can be simple or challenging. This job falls somewhere in the middle of our typical mitigation work.
@SouthWestRadon
Жыл бұрын
Excellent content.
@AmericanRadonMitigation
Жыл бұрын
Thank you! Do you have any topics or ideas you'd like us to cover in a future video?
@SouthWestRadon
Жыл бұрын
@@AmericanRadonMitigation New to channel so might have already been covered, but seeing the actual stitching process would be excellent. Wondering what tool you use (other than an auger or your hand + good 'ol screwdriver) to tunnel from one hole to another. I'm assuming there would be something available similar to the tool used to run new cabling underground in residential areas.
@AmericanRadonMitigation
Жыл бұрын
Here's a video that shows the stitching process. kzitem.info/news/bejne/ta95u6KbhnWUf5g
@MattFerguson26
7 ай бұрын
This is gold, thank you Jesse! Where do you get that pipe insulation?
@AmericanRadonMitigation
7 ай бұрын
Thank you! Ferguson or Menards. We also have it listed in our Amazon shop. Amazon.com/shop/americanradonmitigation We do earn a commission if you purchase from our shop. Thanks for your support!
@andrewhickox2184
2 жыл бұрын
Great Video
@AmericanRadonMitigation
2 жыл бұрын
Thank you, Andrew! Do you do radon mitigation?
@waynejohnson3882
5 ай бұрын
What do you use to auger the tunnels between the stitching holes or could you do a video on how you do it? Thanks.
@AmericanRadonMitigation
5 ай бұрын
You should find what you're looking for in this video. kzitem.info/news/bejne/ta95u6KbhnWUf5gsi=k9676qE6juyVygJH
@programmerm5907
Ай бұрын
Awesome video, love the content - so the stitching is just an open tunnel back to suction point that you dug/connected through a series of holes? Any concerns of integrity of the foundation removing that much material?
@AmericanRadonMitigation
Ай бұрын
Yes, that's correct. The concert floors in Minnesota are not structural like the footings, so removing that much soil is not a concern. The 3.5-inch concrete slab can easily bridge the tunnel.
@programmerm5907
Ай бұрын
@@AmericanRadonMitigation thanks so much for that quick response! Your channel is fantastic and is certainly saving lives. Take care!
@AmericanRadonMitigation
Ай бұрын
Thanks for reminding us why we do it!
@Delta-jt5hd
3 жыл бұрын
Thank you so much for this extremely informative video. Such amazing workmanship! I’ve learned much. One question, it looks like suction point 2 isn’t that far from the first one. Why not simply “stitch” all the way to the first point and thus avoid creating another suction point altogether? Was that a structural decision?
@AmericanRadonMitigation
3 жыл бұрын
Thank you! That's a great question. I could have done that. However, running a pipe is way easier and faster than stitching. I didn't need to use valves in this system, but separate suction points would allow valves if we wanted to vary the suction in each suction point. For example, having one suction point on drain tile or sub-slab depressurization and a second pulling from an encapsulated crawlspace. You want to be able to control where the air comes from. Otherwise, the fan will pull from where it's easiest. Are you a mitigator? If so, where are you from?
@Delta-jt5hd
3 жыл бұрын
Got it. That makes a lot of sense. I'm not a mitigator, just with a DYI enthusiast mindset that always tries to understand how things work under the hood. We just got a single-point radon system installed by a mitigator here in Georgia. Over the past month, however, the numbers have been creeping upward. Before mitigation, the numbers were between 4 and 7 in the basement. Right after the system was first installed back in July, I saw numbers dropping below 2, sometimes even below 1, and now it's up to 3.5 for the entire past week. It's still quite short term, so I'm observing and see if I need to do anything further. I found the pictures I took of our foundation back when it was new construction, and from the pictures I can understand why the current suction point isn't optimal. Therefore, I've been researching on the Internet on multiple suction points just in case. Thanks again for your videos. I watched all of them!
@AmericanRadonMitigation
3 жыл бұрын
You're welcome! Feel free to reach out to us if you'd like some advice, as we offer consulting services.
@jamesmchugo9422
11 ай бұрын
Good informative video. I am curious about the concrete you use, why don’t you use hydraulic concrete? It sets fast, but the big advantage is hydraulic concrete expands as it cures, if it’s water tight, it’s air tight. Any thoughts? Also, one last question if your working on a basement floor with radiant in floor heating how do know where to drill your test holes so you don’t hit any of the heat tubing?
@AmericanRadonMitigation
11 ай бұрын
Thanks, James. Good questions. 1. I use fast-setting Sakrete since the yield of one bag is much higher and far less expensive than hydraulic cement. We are also not relying on the concrete to make the seal. By the way, I've had hydraulic cement leak in the past, so I don't rely on it to make an airtight seal anymore. 2. We use a thermal camera that plugs into a smartphone. Here's a link to the ones I would get. www.amazon.com/shop/americanradonmitigation/list/2TZ3HBU6ICV4Z?ref_=cm_sw_r_cp_ud_aipsflist_aipsfamericanradonmitigation_FSA24YV85QRNKPD0FHJ3
@philh.7100
10 ай бұрын
Isn’t 1.3 a low level? Is the system needed?
@AmericanRadonMitigation
10 ай бұрын
There is no safe level of radon. The lower you can get it, the less risk there is. I find that our customers who know someone affected by what doctors believe to be radon-induced lung cancer are more concerned about getting their radon close to outdoor levels.
@AnthonyCelata
10 ай бұрын
How are you excavating your stitching holes? They seem pretty far apart to get like a long drill bit or something in there, I have to do this in my house. I'm at a 5.4 pCi/L during the day and for some reason at night it goes up to about 8 pCi/L at night. I must be doing something during the day that vents it or something...
@AmericanRadonMitigation
10 ай бұрын
I use an auger on a right-angle drill, screwdrivers of varying lengths, my hand, and a shop vac.
@juanalonsoh
10 ай бұрын
Thanks Jesse. The micromanometers that you show on your videos seem to cost several hundred dollars. Is there a cheaper alternative for DIYers who only need to do PFE testing once?
@AmericanRadonMitigation
9 ай бұрын
You bet, Juan! I'm sure you can find some cheap ones online. We do rent the DG8 gauges in a tool kit for DIYers as well. americanradonmitigation.com/product/radon-tool-kit-rental/
@nhart9043
2 жыл бұрын
Do you have a video of the steps before this, where you actually cut the stitching holes and did that part of the process? I tried looking, but couldn't find it. Great video! Had to laugh a bit though when you talked about a radon level of 1.3. Out here in CO our radon levels are so much higher!
@AmericanRadonMitigation
2 жыл бұрын
Yes, check out this video for more on stitching. kzitem.info/news/bejne/ta95u6KbhnWUf5g We typically see radon levels between 2 and 10 pCi/L in the homes we fix. What part of Colorado are you from? I head there Saturday!
@nhart9043
2 жыл бұрын
@@AmericanRadonMitigation Cool, thanks! I'll check out that video. I'm Southwest Denver Metro, hope you have a great time in CO!
@lauretiu
Жыл бұрын
@American Radon Mitigation I live in ND and just found out today my radon in the basement is 31.5 PCI/L. I'm livid only thinking of what the cost will be to fix that and if I should get ready to say my goodbyes since I only found out about radon 1 week ago. Do you do any work in ND(fargo)?
@AmericanRadonMitigation
Жыл бұрын
Not at this time.
@bobzylman3050
Ай бұрын
How much did it cost? Length was perfect.
@AmericanRadonMitigation
Ай бұрын
Thank you, Bob! We don't discuss pricing on KZitem since some customers expect it to remain the same years later.
@gregorysaeger8537
10 ай бұрын
What do you do if you know that water gets under the floor a few times a year?
@AmericanRadonMitigation
10 ай бұрын
If it were my house, I'd install a perforated sump basket and pump. Perhaps drain tile as well.
@gary9681
Жыл бұрын
Great job, Great detail. Thanks Question, would having a 4 inch pipe on the exhaust side of a high vac 3 inch system provide any benefit. Such as less energy for fan? I understand your thinking on the 4 inch pipe preventing less of a freeze problem, good idea.
@AmericanRadonMitigation
Жыл бұрын
Thank you, Gary. A few feet of 3-inch pipe above the fan would add an insignificant amount of friction loss on a high-suction radon mitigation system. The less air a radon fan moves, the less power it consumes. If we were in a warmer climate, we would use a 3-inch discharge on high-suction, low-flow systems.
@theobadger8314
10 ай бұрын
Really detailed and informative video. Thank you so much! Question, what is the name of that 3" (or 4"?) PVC floor bushing that you used for the slab penetration?
@AmericanRadonMitigation
10 ай бұрын
Thank you for watching! It's a 4x3-inch PVC reducer. Here's a link to one on Amazon amzn.to/48WKEnJ If you purchase using the link, we do earn a commission.
@theobadger8314
10 ай бұрын
@@AmericanRadonMitigation Great, thanks! I have no problem with you earning a commission, and I appreciate you being upfront about it.
@AmericanRadonMitigation
10 ай бұрын
@@theobadger8314 We appreciate it! You bet!
@deeeeeeps
9 ай бұрын
Being in Ramsey Mn with a lot of sand my meter is saying 10 PCI/L I think I have to do this. Do you think it is a must to go through the attic? Is condensation/freezing a problem if it's on the outside? Is there a reason you didn't run horizonal pipe in the attic so the pipe could stick out the back of the house and not the front? I'm a builder/remodeler if I ever need radon mitigation for a customers's house I'll call you.
@AmericanRadonMitigation
8 ай бұрын
I wouldn’t install an exterior system on my house unless it were the only option. In Minnesota, freeze-ups are common in the winter, so when you need it most, it may not work. You can certainly run the stack out the back of the house. You must maintain pitch to drain condensation inside the piping back to the suction point. Be sure to insulate the piping in the attic as well. Be sure to reach out if you have any questions. Good luck with your project! And let us know how it goes.
@halsmith7642
10 ай бұрын
Good work yet lot of work and money to reduce a 1.3 pCi/L radon level. I would think the money & energy usage would have been better spent on a HVR or even EVR?
@AmericanRadonMitigation
10 ай бұрын
Perhaps. However, you have to double the air changes to cut the radon levels in half. The radon system is likely more expensive upfront but will have a lower operating cost with the added benefit of reducing moisture below the slab.
@halsmith7642
10 ай бұрын
@@AmericanRadonMitigation with a 90% heat recovery on a unit transferring at a recommended 0.7 per hour. If the house started at 20 pCi/L the fresh air at say 0.2 pCi/L just taking a 50% out for mixing to make the calculation easy in about 6 hours the only radon in the house is what is getting into the air from inside and out. When everyone figures this out they are just going to sell more Heat Recovery Ventilators for residential. Likely all the office building engineers have this figured out.
@georgelichak3972
Жыл бұрын
Why didn’t you put a condensation bypass in? Won’t the rain coming in the roof vent damage the fan???
@AmericanRadonMitigation
Жыл бұрын
Condensate bypasses are used on exterior systems, not interior systems where the fan is in the attic. Interior systems don't generate much condensation because the piping is insulated except for the foot of pipe on the roof. Exterior systems have 10 to 40 feet of piping that are not insulated. The different temperatures of the air inside the piping vs. outside causes condensation to form inside the piping. Similar to how a glass of ice water forms condensation. This condensation produces more water than rain entering the top of the open exhaust. This condensate is what the condensate bypass is diverting around the radon fan, not so much rainfall. Hence the name condensate bypass. Thanks for the question, and thanks for watching, George!
@georgelichak3972
Жыл бұрын
@@AmericanRadonMitigation oh I understand now thank you. I’m installing mine in the basement tomorrow with my fan inside, it’s a finished basement so do I have to insulate the pipe inside?
@AmericanRadonMitigation
Жыл бұрын
Nope, just where the piping passes through unconditioned areas of your home. Check out what can happen if you skip insulation. kzitem.infoA8O9GsJijOk?feature=share
@georgelichak3972
Жыл бұрын
@@AmericanRadonMitigation thank you
@AmericanRadonMitigation
Жыл бұрын
@@georgelichak3972 you bet!
@user-bi1tl7hb4k
Жыл бұрын
Hello. Thanks for your videos! I have a home with radon level’s typically .4 but the last week we have gone up to 1.6 ish. The u tube is measuring 1.5 neg pull so I think fan and system are fine. Should I be looking for a supplemental radon fan? Using Airthings view for measuring data. Thank you
@AmericanRadonMitigation
Жыл бұрын
You may be losing suction under the slab in some areas of your home. It's hard to say without seeing it and doing some diagnostic pressure field extension testing. If your radon levels stay higher than you are comfortable with, we do offer consulting and tool kit rentals. americanradonmitigation.com/consulting/
@rodm5830
2 жыл бұрын
So how can they possibly allow you to leave tunnels underneath the slab without taking the chance of compromising the slab.
@AmericanRadonMitigation
2 жыл бұрын
Good question, Rod. The slab is not structural and can span the gap without a problem. There is typically settling under slabs where there is fill. For example, most walkouts, 4-level splits, and garage floors settle in the portions that contain fill. You'll see an example of it in this video. kzitem.info/news/bejne/0YKD1ZaVjX6qeW0
@rodm5830
2 жыл бұрын
@@AmericanRadonMitigation the fact that the slab is not structural is exactly why it needs support and why you are required to firmly packed the ground under a slab before you pour to avoid settling. The only way a slab can settle is if the ground is compromised underneath and this is exactly what your process does. I can’t believe any county code enforcement would allow this. It seems you are taking the chance of creating a structural problem in the house to solve a smaller problem that could easily be solved by opening windows, or even leaving bath fans running. I had radon levels of over 22 and reduced them to under one just by opening the house up and letting it air out. I know this doesn’t work long term but the problem can be solved easier than what you are doing. I would never purchase a house that I knew had tunnels under the slab.
@Benzhengcalgary
3 жыл бұрын
I’m worried about that the rain water will be pouring into house through the top pipe extending out of the roof
@AmericanRadonMitigation
3 жыл бұрын
Hey Ben. The small amount of rain that does get in the pipe will end up below the slab only to be dried out by the radon system. Upward exhaust without a rain cap is the preferred way to discharge soil gases. Check out section 6.4.9 of the standard. standards.aarst.org/SGM-SF-2017/25/index.html
@llll2233
2 жыл бұрын
what is the model of the concrete hole saw you were using to drill the suction point?
@AmericanRadonMitigation
2 жыл бұрын
Here's a link to the 5-inch Bosch core bit we use Bosch 5-Inch x 17-Inch x 22-Inch SDS-Max Rotary Hammer Core Bit, HC8575 - amzn.to/36ik4Xw We have links to many of the products and tools we use in the description. Thanks for watching!
@jentrevorpitts323
2 жыл бұрын
do you not need a rain cap on the top of the pipe on the roof???
@AmericanRadonMitigation
2 жыл бұрын
No, we don't use them here in Minnesota. The radon mitigation standard addresses rain caps in sections 6.4.12.1 through 6.4.13.4. standards.aarst.org/SGM-SF-2017/26/index.html We also have a video about rain caps here. kzitem.info/news/bejne/roWBm5l3iXpkhoo
@davesmith913
3 жыл бұрын
Have seen others back fill the holes they do with larger rock is the something you do or recommend? thanks
@AmericanRadonMitigation
3 жыл бұрын
We do not. The slab in this house was strong enough to span the tunnel and suction pits we created. Occasionally we do if the slab is only an inch or two thick. We've also dug suction pits in an X shape, so there is support near the pit's center, eliminating the need for rock. You wouldn't want to restrict airflow with stone if it was a high-flow situation. Thanks for the question, Dave. Are you a fellow mitigator?
@creetpollock4759
9 ай бұрын
Why not maintain a positive pressure?
@AmericanRadonMitigation
9 ай бұрын
Many commercial buildings maintain a positive pressure relative to the outside. I've heard it's not practical in a house, though. Perhaps our homes are too leaky, and we'd be forcing conditioned air through all those leaks. Which may be far more costly than installing and operating a radon mitigation system.
@artpfenninger5914
3 жыл бұрын
What size pipe is required? If you don't have any way of doing pfe testing can a 4" be put in or would that be overkill?
@AmericanRadonMitigation
3 жыл бұрын
Good question, Art. 4-inch piping would have been overkill in this home but would not have hurt anything. Using a pipe that’s too small or has many fittings may restrict airflow through the pipe. This, in turn, can lead to the use of a larger radon fan, more noise, more energy consumption, weaker pressure field extension, and limited radon reduction. Generally, we use 4-inch piping in homes with drain tile or homes that will be moving a lot of air. If it's clay or fine sand below the slab, we usually use 3- inch pipe. I wouldn't recommend the use of 2-inch piping if you can't measure airflow. Does that answer your question? If not, we do offer virtual consulting and rent diagnostic equipment. You can call Danielle for more information at 612-474-1004.
@artpfenninger5914
3 жыл бұрын
@@AmericanRadonMitigation Thanks that helps a lot
@AmericanRadonMitigation
3 жыл бұрын
You're welcome, Art.
@musickpsmesane
2 жыл бұрын
I wish you were in my area! I have reservations about the company I was considering. Do you have any suggestions or tips on how to find a good Radon mitigation specialist? The EPA and MD state site wasn’t as helpful as I had hoped.
@AmericanRadonMitigation
2 жыл бұрын
That would be an excellent topic for a video! What questions or issues would you like to see addressed?
@musickpsmesane
2 жыл бұрын
@@AmericanRadonMitigation My biggest problem has been finding certified mitigators that service my area. The EPA website keeps referring me to my state website which does not have a list. From the calls that I’ve made, one of my questions is: When receiving estimates, will mitigators provide a guarantee of the lowest number of pCi/L their system will get the levels in my home down to? If so when selecting one, what number should I be looking for? Currently in my area the average is 4- 4.1.
@musickpsmesane
2 жыл бұрын
Also, if the company that I find isn’t as thorough as you are in your videos, what can I do in my home to get those levels even lower? Our basement is finished and to be honest I’ve never been in the attic. I saw in one of your videos That’s you caulked around the frame as well as used spray foam and insulation in certain parts of the attic. Thank you again for the videos that you’ve posted and for sharing your knowledge. It is much appreciated!
@AmericanRadonMitigation
2 жыл бұрын
I'll try to shoot a video about this and have it post next week or the following week. Thanks for the questions!
@musickpsmesane
2 жыл бұрын
@@AmericanRadonMitigation Thank you! Another question I have is how much does digging on the outside of the house affect an already installed radon mitigation system? During a call with a company I mentioned that I may need waterproofing done on the outside of the house. It was stressed that if I needed any waterproofing done, I should get it done before the radon mitigation. Then they said that I don’t need waterproofing unless there is standing water in my home 🤨. The waterproofing contractor I spoke with said that if we remove the dirt hill next to the retaining wall on the side of our house (on the opposite side of where I would like the radon mitigation system to be-the same side as the HVAC system) that would resolve the water retention problem that we have on that side. Would addressing the wall and dirt hill after doing radon mitigation cause a problem or void a warranty?
@eddiemente2606
3 жыл бұрын
Thanks for the great informative videos and your awesome interaction in the comments. Is there any reason for a house of this age to have an HVAC system draining condensation into a Radon pipe coming out of the ground? We have a radon system in the corner of the basement leading to the fan etc. to the outside of the house. But about ten feet away there's a PVC pipe cemented to the ground and marked with all the RRS warning stickers on it, next to the furnace that had the condensation pipes hooked up to it. Without it's connection to the HVAC it's just a 3-4 foot PVC stump sticking out of the ground where we think there might be a drain. I can't find anything consistent with this being part of other systems. We can't tell if it's actually part of the Radon system or if the previous owner re-purposed some PVC for some reason without removing the warning sticker, and then why was it hooked up to the furnace . . . ?
@AmericanRadonMitigation
3 жыл бұрын
Thank you, Ed. It sounds like it was perhaps a soakaway drain to drain condensation into the soil. Someone may have capped it off and installed a condensate pump to handle the condensate from the HVAC system.
@eddiemente2606
3 жыл бұрын
@@AmericanRadonMitigation But why would it be integrated into the Radon reduction system?
@AmericanRadonMitigation
3 жыл бұрын
Is it an additional suction point?
@eddiemente2606
3 жыл бұрын
@@AmericanRadonMitigation I think that's what I can't figure out... there's nothing above ground connecting it to the stuff with the U-tube and fan connected. Could the connection only be under the basement floor?
@AmericanRadonMitigation
3 жыл бұрын
I doubt it. It's hard to help you without seeing it.
@jimschaller5054
2 жыл бұрын
Is stitching possible with in-floor heat?
@AmericanRadonMitigation
2 жыл бұрын
Yes, you will want to locate the radiant heat before drilling, though. We use a thermal camera or hire a company to use ground-penetrating radar to find them if they can't be turned on.
@the74impala
2 жыл бұрын
Do you go to Wisconsin too?
@AmericanRadonMitigation
2 жыл бұрын
Yes, we do serve Wisconsin. americanradonmitigation.com/free-estimates/
@user-zq6pj5jo8j
7 ай бұрын
All that work for just 1.3? Seems like way over kill. Most systems ive seen are starting at 10-20 and getting down to 1.3 or lower. Why even put a system in at such a low level? You can get higher than 1.3 outside in some areas. Radon is in the crust of the entire world there is no place that there is none. Your best thing to do for your breathing health is to not smoke, then worry about Radon.
@AmericanRadonMitigation
7 ай бұрын
Most homes we work on in Minnesota have pre-mitigation radon levels between 2 and 10 pCi/L. Since there's no safe level of radon, the lower the better. Some people have a lower risk tolerance than others. Typically, we find those people know someone who has lung cancer that is believed to be caused by radon exposure.
@user-zq6pj5jo8j
7 ай бұрын
@@AmericanRadonMitigation Sound like a great way into scaring people into giving you lots of money....
@guidedbygreen1480
Жыл бұрын
Good work , but my goodness brother, wear a mask!
@AmericanRadonMitigation
Жыл бұрын
Thank you for the feedback. I don't like that a mask makes my glasses fog. Although, I suppose limited vision is better than insulation in my lungs.
@guidedbygreen1480
Жыл бұрын
@@AmericanRadonMitigation I am in the same boat, as I have glasses. Although it's usually more protection than needed, I usually have better luck with a half-face respirator. It creates a better seal and doesn't fog the glasses. Anyway, I wish you lived near me as im dealing with a radon issue. LOVE YOUR WORK!
@AmericanRadonMitigation
Жыл бұрын
Awe, thank you!
@kylekelley213
Жыл бұрын
long
@AmericanRadonMitigation
Жыл бұрын
Do you like the longer format better, or is it too long?
@kylekelley213
Жыл бұрын
@@AmericanRadonMitigation I'm trying to get into the mitigation business I'll take them hours long.. Lol. Love the great videos, I just got back from a class with the best in Kansas.
@AmericanRadonMitigation
Жыл бұрын
I've been to or helped teach that class four or five times and learn something new every time. Welcome!
Пікірлер: 182