Your dog undermined this nice explanation of yours. I had to laugh the whole time at the tail wiggling around.
@AtlasTargetWorks
5 жыл бұрын
haha, she certainly likes to help!
@lizcoombe4888
4 ай бұрын
The dog's tail wagging in the background! 😂
@WassaMatterU
Жыл бұрын
What was particularly intriguing was the little black wagging tail behind the board. 😂. Great information though. Thank you!
@AtlasTargetWorks
Жыл бұрын
She's such a good helper!
@levicress4243
3 жыл бұрын
Great video explanation. Thanks!
@wetwriterrr
4 жыл бұрын
Good info for all shooting steel. THANKS
@diywithjonandpebbles
2 жыл бұрын
I’ve had m2 ball copper jackets come back to the firing line from a damaged target at 100 yards.
@IndependentArmz
10 ай бұрын
great information
@eddluireg
9 ай бұрын
great video thanks !
@tittiger
5 жыл бұрын
Brad... I have never shot a "lead" 5.56 bullet. Didn't know they existed. I shoot 62gr green tip penetrators. You make it sound as if I should not use your targets with my loads. Thanks
@AtlasTargetWorks
5 жыл бұрын
I know we discussed this via my website chat but for the benefit of others finding this comment. The green tip "penetrators" have a steel core which in my experience only causes slightly more damage to the steel. More importantly though is the fact that the steel core doesn't explode into a million pieces like a lead bullet does and will ricochet at odd angles. A dealer of mine hosts a demo shoot every year and they had to stop using steel targets because they were finding little holes and slits in their steel building 50 yds away from the steel cores.
@TMS5100
2 жыл бұрын
You should never use green tip penetrators with any steel target ever. Not only will it permanently damage any AR500 ever made, it's also a fire hazard.
@NESig
Жыл бұрын
Good video!!!!
@AtlasTargetWorks
Жыл бұрын
Thanks!
@rkba4923
7 жыл бұрын
AR doesn't stand for "Automatic" nor "Assault" Rifle either.
@Paul8S1
Жыл бұрын
Aww the doggy’s tail 😂
@scottmartin8888
3 жыл бұрын
Thats crazy watching the bullet basically liquefy.
@KethenGoesHam
4 жыл бұрын
Does 2 1/2 inchers bolted together perform as well as 1 inch?
@AtlasTargetWorks
4 жыл бұрын
My thoughts... maybe? If the edges were welded together so there was no gap which would cause a bullet impact to simply fling the rear target back like a newtons cradle I think it would.
@JeffBradley-yu4tr
Жыл бұрын
Is 5/16" plate something that exists? I'm shooting a mix of 9mm pistol and 5.56 rifle (M193 ball; not green tip), and it would be nice to save some weight on the plates. If 5/16" is available, I would be interested in trying that. (And I'm willing to pay full price to be a guinea pig.)
@LocnavLivoc
3 ай бұрын
01:20 where can i get tables with tails? :D
@bigbossignition
3 жыл бұрын
So can you make body armour out of AR500 steel?
@AtlasTargetWorks
3 жыл бұрын
There are companies that make armor plates from AR500 but they use special coatings and they curve the plates.
@N5KDA
18 күн бұрын
Why is no one still using T -1 steel. Yea, it not as tough at AR500 but it is cheaper. For handgun rounds 3/8 or 1/2 in is good stuff.
@AtlasTargetWorks
13 күн бұрын
For my business, the market for pistol only targets is extremely small. Most people (again, from my experience) want something that is capable of handling centerfire rifles. It's not worth stocking something with such low demand.
@akroadscholar
2 жыл бұрын
👍🏼
@RikthDcruze
3 жыл бұрын
So can i make armour plates with AR500 steel?
@DS-wo8wr
21 күн бұрын
Yes… there are many companies already doing this.
@urealpg2948
Жыл бұрын
Fenominal video
@littlehuey5679
3 жыл бұрын
Why not tougher steel targets ?
@gunlabchris
2 жыл бұрын
At my rage we has different stations for shooting that are number 1 to 5 at 25 yd 50 yd 100 yd . The numbers get shot and constantly replacing them. They sit above the target and honestly think the shooters do it on purpose. Would this be safe to use for numbers? Thanks
@AtlasTargetWorks
2 жыл бұрын
Cutting the numbers out of the same stuff as the targets would certainly make them last a lot longer!
@mattgazewood
3 жыл бұрын
lol that dog tail
@Uncle_Chuck
3 жыл бұрын
So it’s bisaloy?
@tophat2002
Жыл бұрын
Can't cut with grinder?
@AtlasTargetWorks
Жыл бұрын
You can, it'll chew through a lot of discs/wheels though.
@otisredding5298
4 жыл бұрын
How do you cut it
@AtlasTargetWorks
4 жыл бұрын
With a "laser beam".
@TripAMD
3 жыл бұрын
Strapped to heads of sharks
@ireallyreallyhategoogle
2 жыл бұрын
Your paper board is wagging its tail.
@chrisxshock
3 жыл бұрын
Your pad is wagging...
@sexybeast6567
4 жыл бұрын
Reload de-milled green tip bullets in a 22-250 and I'll show you holes in all your ar500 targets and any of your body armor plates made out of it as well ...lol
Пікірлер: 43