Whatsapp:+8618765972210
What Is Sand Reclamation?
Sand Reclamation is the physical, chemical, or thermal treatment of used foundry casting sands so that they can safely and effectively be re-used for molding and coremaking applications.
Mechanical Reclamation System
A typical mechanical reclamation system will include the following sequence of components:
Shakeout Deck
Attrition Mill
Elevating Device
Surge Hopper
Magnetic Separator
Agglomerate Screener
Fluid Bed Classifier (Cooling Optional)
Elevating or Pneumatic Transportation Device
Bulk Storage Silo for Mechanically Reclaimed Sand
Dust Collector
Mechanical Reclamation System Offerings
A basic mechanical system includes:
Shakeout Deck / Attrition Mill Combination Unit
Bucket Elevator
Surge Silo/Hopper (suggested)
Classifier without cooling
Control Panel for All Above Items
A basic mechanical reclamation system is a good choice for foundries who:
Shakeout when sand is 250°F or lower
Have throughput requirements not exceeding 6-8 TPH depending on resin system, metal poured, sand:metal ratio, etc.
Do not need to cool their sand prior to leaving the reclamation system
Have few, if any, chills in their molds
Shakeout Deck Attrition Mill Combination units are available in deck sizes of 3’, 4’, 5’, 6’, and 7’ square. Generally, the maximum mold should be at least 1’ smaller than the size of the deck.
Optional Upgrades to basic mechanical systems:
Magnetic Separation
Additional Agglomerate Screeners
Upgrade to a Cooler Classifier to allow sand to be cooled
High Temperature Air Driven Elevators to allow for sand temps above 300-400°F
After the classifier, the sand will generally need directed to a different silo for bulk storage, or back to a daytank for point of use storage. In either case, as there is generally horizontal distance between the classifier and this storage location, a pneumatic transporter is an excellent way to move the sand to its destination.
There are times when a foundry may need a system that has more capability than a basic system. Some examples may be:
Large throughput amounts or very large molds
High temperature of shakeout
The desire for automatic chill removal from the sand stream
Fragile castings that require a modulated shakeout
In these cases, it is very common to change from a shakeout deck/ attrition mill combination unit over to a system that has separate pieces of equipment for shakeout and attrition, as well as often having vibratory lift devices to elevate chunks of sand.
---------------
Qué es la recuperación de arena?
La recuperación de arena es el tratamiento físico, químico o térmico de las arenas de fundición usadas para que puedan reutilizarse de manera segura y efectiva para aplicaciones de moldeo y fabricación de machos.
Sistema de recuperación mecánica
Un sistema de recuperación mecánico típico incluirá la siguiente secuencia de componentes:
Cubierta de sacudida
Molino de desgaste
Dispositivo de elevación
Tolva de sobretensión
Separador magnetico
Cribador de aglomerado
Clasificador de lecho fluido (enfriamiento opcional)
Dispositivo elevador o de transporte neumático
Silo de almacenamiento a granel para arena recuperada mecánicamente
Colector de polvo
Ofertas de sistemas de recuperación mecánica
Un sistema mecánico básico incluye:
Unidad combinada de plataforma de sacudida/molino de desgaste
Elevador de cangilones
Silo/Tolva de sobretensión (sugerido)
Clasificador sin refrigeración
Panel de control para todos los elementos anteriores
Un sistema de recuperación mecánico básico es una buena opción para fundiciones que:
Sacudida cuando la arena esté a 250°F o menos
Tener requisitos de rendimiento que no superen los 6-8 TPH dependiendo del sistema de resina, el metal vertido, la proporción arena:metal, etc.
No es necesario enfriar la arena antes de abandonar el sistema de recuperación.
Tienen pocos escalofríos, si es que tienen alguno, en sus moldes.
Las unidades combinadas Shakeout Deck Attrition Mill están disponibles en tamaños de plataforma de 3', 4', 5', 6' y 7' cuadrados. Generalmente, el molde máximo debe ser al menos 1' más pequeño que el tamaño de la plataforma.
Actualizaciones opcionales a sistemas mecánicos básicos:
Separación magnética
Cribas de aglomerado adicionales
Actualice a un clasificador más fresco para permitir que la arena se enfríe
Elevadores accionados por aire de alta temperatura para permitir temperaturas de arena superiores a 300-400 °F
Después del clasificador, generalmente será necesario dirigir la arena a un silo diferente para su almacenamiento a granel, o de regreso a un tanque diario para su almacenamiento en el punto de uso. En cualquier caso, como generalmente existe una distancia horizontal entre el clasificador y este lugar de almacenamiento, un transportador neumático es una excelente manera de trasladar la arena a su destino.
Негізгі бет What is sand reclamation system? foundry resin sand molding reclamation system compact design
No video
Пікірлер