For those interested, the Stihl branded axe is I believe actually a German made Adler 951600 spitting axe, 3000g of juicy Germanic goodness. I have three of them 🤭 Also, the Husqvarna axe is made by German firm Gardena, and can be purchased cheaper in the grey and turquoise regalia of the original Gardena 2800.
@John-cj3ve
5 ай бұрын
My favorite maul; if I have to use one; is the SIX pound Fiskars maul. The eight pound one rather unwieldy. The six pound one swings like an axe!
@shane4176
5 ай бұрын
Huh I didn't know about that one. I guess I gotta get one of those now!
@1ce4ever
4 ай бұрын
I would agree. It is also my favorite, and I have quite a few mauls. Great all around.
@martinmiller1087
2 жыл бұрын
In the early 70s, I had two spltting mauls made by Woodings - 6 lb and 8 lb. Very effective conventional splitting maul head shape. ... I lived off grid in interior Alaska and heated primarily with White Spruce. ... While there, I added a "Monster Maul," mail ordered. It had a round steel pipe handle that was pressed into an oval shape. It and the abrupt, wedge-shaped, welded steel head were painted orange. ... The first time I swung it, at about -35° F, wearing two pairs of mittens, it flew out of my hands. A roll of friction tape remedied that. ... I didn't use it often, but if I needed it, no spruce round could stand up to it. ... I soon discovered that rounds that were really "tight" with lots of knots, could just be set aside. ... When the temperature dropped below -50° F, one swing with the 8 lb Woodings would cause those tight rounds to literally explode apart. It was a pretty amazing phenomenon. Some splits would end up over 15 feet away from the round! ... I'm sure you've ascertained that how you decide to buck up the logs and limbs, has a lot to do with how difficult they are to split. ... I had quite a bit of Aspen on my land too. It was normally easy to split with the 6 lb Woodings. Those modern 3.5 lb splitting axes you showed, would have been perfect for that. ... Incidentally, Aspen doesn't hold the fire very well for an overnight burn in the stove. It also creates a lot of ash. I reserved my Aspen for early Spring and late Fall heating. ... The ash is good for traction, when sprinkled onto ice and hard packed snow. Some of the ash, regularly went into the outhouse hole too. ... Great, practical, comparison video. Thanks. ... Would you consider thinning the wooden handle a bit, below the head on that ridiculously fat handled maul? ... I don't know if you have access to hickory where you live. It's very worthwhile to cut some straight hickory saplings. Auger a screw eye into one end and hang them up in the barn or garage to cure. Then fabricate your own axe and maul handles from them. The concentric circular grain pattern in those homemade handles is vastly superior to any store bought, hickory handle. ... My broken hickory axe and maul handles were used for hammer, hatchet and file handles. Some of them ended up making stout stanchions for the dog sleds too. ... Hickory is a valuable commodity in Alaska. ...Good luck.
@shane4176
Жыл бұрын
Thanks for the great comment! Yes I have lots of hickory where I live
@budtackett8347
5 ай бұрын
i have a cut elm sapling and plan on trying that as axe handle.couldnt move the tree from where it was growing .thanks for sharing the cinders uses as well .
@antasosam8486
4 ай бұрын
I'm envious of you collection of axes. I've got only Fiskars.
@shane4176
4 ай бұрын
You should see my forest axe collection. I have several wetterlings axes.
@KrisH-mc8hd
8 ай бұрын
Fiskars maul is my go to for Aussie hardwood 💪
@shane4176
8 ай бұрын
Yeah that stuff looks tough as heck!! I seen videos of guys splitting it looks horrible haha.
@billgreene7456
Жыл бұрын
Great and helpful vid… full of real practical info. I cut and split my wood and thecFiskars is amazing but I also have mauls and wedges. Fun working with these tools and a great workout!
@shane4176
Жыл бұрын
Thanks for watching and thanks for the kind comment. I truly enjoy being outside and working with these tools and staying in shape.
@roncar1761
Жыл бұрын
True! 🪓🪓🪓
@40beretta1
5 ай бұрын
This was excellent... I have replaced (still have them) all my wood handle axes / splitting and mauls with the composite handles.
@shane4176
5 ай бұрын
thanks man I appreciate that! The composite handles are definitely tough to beat.
@tgsgardenmaintenance4627
Жыл бұрын
I have a Roughneck maul for bigger stuff, but generally use my Husky splitting axe most things and find it to be very good! If the handle was 4 inches longer, it would be perfect!
@DonKachot
Жыл бұрын
Great demonstration!👍 Thanks for sharing🙏
@shane4176
Жыл бұрын
No problem thanks for watching!
@leftylattin
Ай бұрын
So i dont know if its a plecebo or not, but sometimes on that really knotted stuff i will take a couple cracks at the knots with a regular chopping axe to just try and break up that kind of curl of knots running through it and it seems to split a bit better. Again it might just be in my head but worth a try if anyone gets really super stuck on a knotted piece
@user-zu6jd5gb8l
29 күн бұрын
I have that Fiskars Pro 8lb maul. It’s a beast.
@ronkay1573
2 ай бұрын
My two best wood splitters are my gransfors Bruks splitting maul and a Tuatahi work axe. Impressive.
@RBnPA
Жыл бұрын
Very informative video. You’re spot on! I ordered a Fiskar’s Iso Core today. Have a small 17” Fiskar Splitting Axe for kindling that I love! I’ve been using a generic basic maul for years and am expecting a huge improvement with the Fiskar Maul! I still want to get a Fiskar x27 splitting axe for softer easier pieces to save on wear & tear on me! I know there’s a lot of hater’s on the Fiskar’s because of the plastic handle but I don’t have a problem with the Fiskar’s handles. Lifetime warranty so I don’t worry about possibly breaking itThe only small suggestion I have is to not split on the ground! I use large round piece of oak about 12”-14” high. Much less bounce when striking the piece on top.
@shane4176
8 ай бұрын
Yeah I don't work about the plastic handle. Yeah it could break, but so could a wood handle. I think for the money the x27 is a hard splitting axe to beat.
@roncar1761
Жыл бұрын
Great video and good tips too! I bought a used x25 first and a month later a used x27. I have better control with the x25 at 5'10" over the x27 which is eight inches longer. If I was splitting bigger rounds 3'-5' I would go with the x27.
@shane4176
5 ай бұрын
I prefer the x25 myself I'm 5-'9". Both work great but the shorter handle I can split a bit faster with.
@richardbadish6990
Ай бұрын
I hear you on not liking the round stihl handle. But to be fair, the rotation of the head upon contact. Is actually helping with the splitting action. If u allow the head to rotate. It helps kick the pieces away from one another. Maybe instead of fighting it, try allowing it to rotate. I think that might help u more, obviously if u are trying to force it not to rotate. It would definitely hurt the hands rather fast.. Just a thought..
@thomaswillows306
Ай бұрын
Just got myself Estwing 6lb maul...jeez, ain't easy for me...cos I'm bit ill at the moment. .. I've got problem with precision and keep hitting base of the handle. .. Great video! Thank you!
@shane4176
Ай бұрын
Well I hope you get better soon!!
@grindlex9
Жыл бұрын
Good stuff! I really like the fiskars products!
@shane4176
Жыл бұрын
For sure I have had any problems with any I've owned. I'll continue using them.
@johnr5545
Жыл бұрын
Thanks nice job God bless
@shane4176
Жыл бұрын
You are welcome thanks for watching. God bless you my friend.
@fp3359
5 ай бұрын
Very helpful explaination; many thanks. For what I've seen, the X27 is my choice. More kinetic energy by the longer handle... For xtreme hard suckers I use a 5 kilogram (11 LB) sledgehammer with a Stihl splitting wedge. Seasons Greetings 🎄 from Holland 🇳🇱
@shane4176
5 ай бұрын
Thank you for watching
@HouseMastersTools
2 жыл бұрын
Good work 🍻
@shane4176
2 жыл бұрын
Hey thanks and thanks for watching!!
@nickwinters3657
Жыл бұрын
That sthil 1 has its got any stamps on the head because I got 1 on a fle market and its got the same looking head as that but myn has just got 3kg stamped in it no sthil stamped on it and the handle on myn has been changed at some point but the head looks identical
@shane4176
Жыл бұрын
I am not sure I will have to check once I get home
@nickwinters3657
Жыл бұрын
@@shane4176 thanks appreciate it 👍
@chrisj9420
Жыл бұрын
What do you think to the Husqvarna 2800? I personally think the handle looks great
@shane4176
Жыл бұрын
It's OK not my favorite. I think the bit is a little to long. But it's not bad
@customaniac
10 ай бұрын
Is the handle of the 28-inch fiskars carbon axe stronger than the 36-inch fiskars of the same model? (not the 36 maul)
@shane4176
10 ай бұрын
I'm honestly not sure sorry.
@haakonww
8 ай бұрын
Just bought the solid a19 fiskars online 😄 and was looking for some inspirational content on the axe😄. And guess who has it 🤩🤩🏴☠️🏴☠️💰. Remembering the “old” videos I watched on the f1,s1 and others. Bk knives 🔪. Fun times 😎. A19 looks nice, it’s an old model but, will se what’s coming I the mail. Fingers crossed 🤞. Hopefully it’s not something else 😄
@shane4176
8 ай бұрын
Haha glad to see you back!! Yeah hopefully that one works out for you. I'll have to look it up I mat have one I'm not sure?
@haakonww
8 ай бұрын
@@shane4176 😄👌👌🔪🔪 me to. Ohh yeah maybe it has another name in the states 👌
@haakonww
8 ай бұрын
@@shane4176 yeah is called a (Splitting Axe (28")) Fiskars in the states😎. Not Solid a19 like it’s called in Scandinavia 😄🏴☠️
@bernardanderson3758
Жыл бұрын
I’m splitting up wood myself
@shane4176
Жыл бұрын
Enjoy it!
@greekveteran2715
2 жыл бұрын
So, generally speaking, get a Fiskars? I try to find a good value felling axe, ideal for hard woods, but they all come with bent handles and their bevel geometries, require sometimes literaly days of filing them down, to make them work properly. I had the Fiskars X17 in mind, to get it as my spliting axe, Nice video, Keep it up!
@shane4176
2 жыл бұрын
Yes buy the 28" and the 36". See which fits and feels better to you. I'd say you absolutely will not find a better splitting axe for the money. Just purchased a Collins splitting axe it's on its way. Can't wait to try it out. Thanks for watching.
@rhythmfield
5 ай бұрын
@@shane4176how’s that Collins? They used to be great till they moved production from original factory in Connecticut to Mexico. Nothing against Mexican craftsmanship, but in this case, the old ones were supposedly much better. my Collins splitting maul handle broke after very little use. I am a beginner, so I was probably hacking away on knots (thanks for that very informative point about “flip your log“, that was my big takeaway from your fine video).
@shane4176
5 ай бұрын
@rhythmfield thanks for watching and for the kind words. As for the Collins I haven't used it a whole lot. When I have its worked just fine. Seems to be great steel with good heat treat. I have a couple of their small forged forest axes. They are both very nice axes. I use those for kindling and bushcrafting.
@rhythmfield
5 ай бұрын
@@shane4176 thanks 👍🏻
@richevy5224
Жыл бұрын
Cool video. You need to get a Gransfors Bruk splitting Ax in your stable. And a splitting maul. I've tried many in my 40 plus years of hand splitting wood, and these GB splitting tools are by far the best I've tried. I use a Fiskars X27 as well.
@shane4176
Жыл бұрын
I have the small but I need to get a large for sure.
@EuroYardService
5 ай бұрын
GB tools are an admiration for craftsmanship
@FeedMeSalt
6 ай бұрын
I friggin hate my double bit. I have been stuck using it all month waiting to get my proper maul back from a friend. It gets stuck or I over swing and kill my splitting block. Also it's not more then six pounds so it's more of a copper I guess.
@shane4176
6 ай бұрын
Yeah double bits can be a pain. They are great if you have the correct wood for them. But not my favorite for actually splitting firewood.
@chrisalarcon7013
Жыл бұрын
Just had to comment to ask you what brand of watch are you wearing? It looks to be of good quality
@shane4176
Жыл бұрын
Oh yeah it's an awesome watch!! I never take it off. The thing I like about it most as it comes with a compass that works very well. It is absolutely bulletproof. It's a Casio gwg 1000. You are correct it is of high quality and fairly expensive. But in my opinion more than worth the money I spent on it.
@chrisalarcon7013
Жыл бұрын
@@shane4176 thank you for your reply and also good video I wish I had the money to buy a Husqvarna Maul lol
@shane4176
Жыл бұрын
@@chrisalarcon7013 where are you located?
@chrisalarcon7013
Жыл бұрын
@@shane4176 Pennsylvania I'm thinking of just buying the 8 lb Maul from harbor freight currently
@shane4176
Жыл бұрын
@@chrisalarcon7013 I'll send you my Husqvarna splitting axe
@HanaBasara
Жыл бұрын
I have Fiskars x11, x17, x21, x25 and x27 😁🙋🇷🇴
@shane4176
8 ай бұрын
Oh yeah!!
@hotpoker4212
Жыл бұрын
🇮🇪🇮🇪🇮🇪 great video,if you split 50/50 on the inner or outer edge, you get better results,less mass to deal with,👍
@shane4176
8 ай бұрын
Yes for sure
@budtackett8347
6 ай бұрын
my fiscars is too light,not into chopping kindling on every round 😅 i ve been on red oak.
@shane4176
6 ай бұрын
Yeah I love splitting red oak. It splits super easy. Hickory and beech not so much.
@budtackett8347
6 ай бұрын
@@shane4176 bought a 8 lb maul like yours only 44 dollars. its so going thru those rounds. lol
@shane4176
6 ай бұрын
@budtackett8347 yeah man those are hard to beat! Enjoy thanks for watching!
@waynejohnson9855
5 ай бұрын
I used a x27 for all the wood I split I do have the 8 pound maul but haven’t found it to be better for me personally. I was advised to quit splitting by hand so now I use my splitter that I bought for wood that didn’t want to split by hand. It’s not as fast as hand splitting but that’s the way it is.
@hodlwise2470
9 күн бұрын
The entire time I was waiting for you to use the Husqvarna lmfao. Why include it and not use it in the demonstration? Lol gg.
@shane4176
9 күн бұрын
I simply forgot sorry
@hodlwise2470
9 күн бұрын
@@shane4176 lol I'm just messing with you. I appreciate the review(s). I'm new to the #axelife game and I came across your video via searching for the Husqvarna A2400. I just ended up going with that one for now. I was originally dead set on a Helko Werk axe, but I've seen too many people talk about their ch0nky handles and I'm just doing this as a hobby and/or when the need calls for it due to downed trees. Thanks for the video, m8. Have a nice one.
@shane4176
9 күн бұрын
@hodlwise2470 yeah the husqvarna is not my favorite axe for splitting bit it's decent. The Helko is nice but the handles are definitely to big for medium to large size hands.
@woodbalt
Жыл бұрын
Can I hit a wedge with the other side of the Fiskars Iso Core maul?
@shane4176
Жыл бұрын
Yeah I'd say so it's soft enough it shouldn't be a problem.
@woodbalt
Жыл бұрын
@@shane4176 Thanks.
@shane4176
Жыл бұрын
@@woodbalt no problem my friend
@woodbalt
Жыл бұрын
There is no information anywhere about which Fiskars model can hit the wedge with, I have an X 27 but it says categorically not allowed
@shane4176
Жыл бұрын
@@woodbalt are you thinking of a metal splitting wedge or a plastic driving wedge?
@pjwillsr
8 ай бұрын
Isn't a maul used to drive a wedge vs a splitting axe. I've heard that you can damage a splitting axe when hitting steel on steel. When not driving a wedge your maul comes into play (as you said) when splitting tougher wood or knotty lumber.
@shane4176
8 ай бұрын
No I would not say a maul is designed specifically for driving a wedge. They are made to split wood but can also drive a wedge
@pjwillsr
8 ай бұрын
thank you...@@shane4176 @Wranglestar put out a short vid stating what I had written. All good opinions.
@faanross
2 ай бұрын
fucken epic video mate thanks
@shane4176
2 ай бұрын
Hey thanks brother I really appreciate that I'm really glad you enjoyed it thanks for watching.
@ronkay1573
2 ай бұрын
Try a Tuatahi work axe?
@shane4176
2 ай бұрын
I have not but often thought about it!
@ronkay1573
2 ай бұрын
It’s worth every penny.
@bibigreen6533
Жыл бұрын
Seems like a recurrent problem, the Fiskars handle breaking at lower temperatures. Being in Canada, makes me nervous.
@waynejohnson9855
Жыл бұрын
I have split at -10 to 15 and not had a problem, the beauty of the fiskars is if it breaks you send it back and get a new one
@shane4176
8 ай бұрын
The first one I bought broke on the second hit. It was below zero that day. But they replaced it and I haven't had a problem since.
@user-ou7tx6zs9n
Жыл бұрын
Які колун серед них найкращий
@shane4176
Жыл бұрын
I like the fiskars splitting axe
@jonathangarzon2798
4 ай бұрын
So splitting axe is the first one you buy, and then when you have a decent bunch of failed splits you buy a maul
@shane4176
4 ай бұрын
Yep sometimes you simply need a maul
@outdoorswithlarryrobin
Жыл бұрын
Hello Shane, just subscribed 🚜🪵👍🏼🇺🇸
@shane4176
Жыл бұрын
Hey thanks so much!!
@hotpoker4212
Жыл бұрын
That wood sounds very thin, the more dense the wood,the harder it is to split,
@shane4176
Жыл бұрын
I'm not sure what you mean by the wood sounds thin? It's white oak that's pretty dense wood.
@richardtate8621
7 ай бұрын
That still maul is beastly
@shane4176
7 ай бұрын
Haha it definitely is
@otosmuhold
5 ай бұрын
You don't split wood on the ground, you split it on a log.
@shane4176
5 ай бұрын
No I usually just split it on the ground I just did it this way for the video. I don't know who would have time to pick up a piece of wood set it up on another piece of wood to split it every single time?
@otosmuhold
5 ай бұрын
@@shane4176 There is a Hungarian proverb for this: What he gains at the toll, loses at the customs. All in all, it is worth splitting a log for several reasons. One reason is that you don't drive the ax into the ground, where there may be stones. So you don't ruin your ax. Most trees have to be set up anyway. (Sorry for the mistakes, I'm working with the translator.)
@darcyedward6325
Жыл бұрын
Something for my American brothers out there, stihl is pronounced still, not steel
@thomaslindroos1667
6 ай бұрын
What!? no? Are you german?
@darcyedward6325
6 ай бұрын
@@thomaslindroos1667 I am
@EuroYardService
5 ай бұрын
Not correct. The h in the German language makes it a pronounced steel. Actually, the proper way to say it would be shteel because st letter combination in German is like sh in English like in shoe.
@darcyedward6325
5 ай бұрын
@@EuroYardService read the comment above yours
@fp3359
5 ай бұрын
@@EuroYardService Kompletter Unsinn was du da schreibt! Mach die Leute hier nicht müde; hau ab. Grüße aus 🇳🇱 11 km von der BRD Grenze.
Пікірлер: 128