Thank you for this! ive changed frames and im hearing the swarm when i liftoff. ill be trying this filter for the first time :D
@MCsCreations
Жыл бұрын
Excellent tip, Mark! Thanks!!! 😊 Stay safe there with your family! 🖖😊
@KwadLife
Жыл бұрын
Really noce explanaition! So now we need a video about the other checkpoint of low and high frequency 😊😊
@uavtech
Жыл бұрын
just use what is in the presets. they restrict the range the notchs can work within.
@samavella8831
Жыл бұрын
Thanks Mark! Great video and great (layman’s) explanation!
@dkieng
Жыл бұрын
Thank you for sharing. I learn something new today!!!!
@GinTonicFPV
Жыл бұрын
Hi Mark, what happens if I switch on Bi-directional DSHOT in a quad that doesn't have the firmware to support it?
@uavtech
Жыл бұрын
The motors could ramp to 100% on arming. THAT SAID, BF now has a safety catch. If you turn on bi-directional, and the signal back from the ESCs is not detected, it will not arm.
@manski209
Жыл бұрын
Hi Mark, great learning videos, thanks for sharing. Out of all your presets in Betaflight, which one is good for a 5" quads and for 3" cinewhoops for just long range and smooth flying. I don't race, i just lke cruising and mellow flying. I'm running BF 4.3.2.
@wiratheos4638
4 ай бұрын
Helo how about esc Firmware Am32, like a NeutronRC, this filter support?
@aviatoFPV
Жыл бұрын
How does RPM filter impact the O3 stabilization? They recommend not using 24khz but 48khz and above.
@uavtech
Жыл бұрын
it doesn't. It sounds like the camera sensor not being fastened to the inside of the housing well for the 03 is the main issue.
@phi-fpv
Жыл бұрын
thanks Mark!
@DronemanfromNepal
Жыл бұрын
I hope you would do more video about 3.5 inch cinewhoop . Thank you
@DronemanfromNepal
Жыл бұрын
My axis cinewhoop started flying bad after I changes from RYP to RP . Any idea why is that ?
@Huck_FPV
Жыл бұрын
Thanks!
@matuka3755
Жыл бұрын
Modern BLHeli_S supports bi-drectional DSHOT? Cool! Thank you for the heads up, Mark :-)
@uavtech
Жыл бұрын
bi-directional DSHOT.
@cinemoriahFPV
Жыл бұрын
I prefer to use dynamic notch only unless the build is a resonant headache then it's RPM to the rescue
@pirateradioFPV
Жыл бұрын
Dunno, I enable stuff just to get the dynamic idle which I find more useful than the RPM filtering 🤷♂😄
@662SSIPPI
Жыл бұрын
would one of your presets be good for my cinebot30.. that thing has mad shakes when off throttle coasting down to a lower altitude? great content i want to learn how to tune my quads better
@uavtech
Жыл бұрын
Cinelog
@662SSIPPI
Жыл бұрын
@@uavtech i have the cinebot30'
@uavtech
Жыл бұрын
Correct. Cinelog preset. Make sure props-in config.
@662SSIPPI
Жыл бұрын
@@uavtech ok thanks.i will have to change motor direction because they come props out stock
@jessefpv4949
Жыл бұрын
@@uavtech So I've got a 3.5 in aura with 2700 KV motor 6s and I'm running 3052 props with a decent pitch. It's a clean build. It's a new build. Everything on it is new I crashed. One of the motors was bad so I changed it to a new one. Went for a spin and the vibrations was there and I don't know exactly why it's it's causing vibrations. I've got bi-directional d shot on with blue. Jay config any recommendations that could fixed the oscillations or the vibrations in the OSD? With filters thank you 🙌
@american7169
Жыл бұрын
I put this on a 3 inch build and had instant fly away issues. Not sure what's going on.
@uavtech
Жыл бұрын
pick low build filter and/or move the Master Multiplier down by 0.5 points.
@reedfpv
Жыл бұрын
nowadays, i usually disable rpm filter. dynamic notch is working so good. i also noticed sometimes motors a bit warmer with rpm filter on.
@tweekFPV
Жыл бұрын
👍🏻👍🏻
@bertbeinaaf8314
Жыл бұрын
Propably I’m getting old. But i find the background music very distracting. And since English is not my native language it makes what you are saying much more difficult to understand. My five cents…
@JDDupuy
Жыл бұрын
I agree the levels are too close together and it is just not needed. Imagine giving a speech on a technical subject and playing music in the background at the same time. Folks will not pay attention.
@AirKhanFPV
Жыл бұрын
Betaflight RPM and Dynamic notch Filters are insane as hell! I mean i turned the LP1 off and my D-Term Slider is at "2" my props are beaten up BUT the damn thing flies smooth as hell, oh i have forgot to say thats the filter tune on my 65mm Whoop which is made from PLASTIC!!!
@cinemoriahFPV
Жыл бұрын
I turn off lpf1 and lpf2 filtering on whoops they rarely have low spectrum noise because of the size and high revving motors.
@AirKhanFPV
Жыл бұрын
@@cinemoriahFPV im running a mpu6000 on a f4 its downsampling from 8k to 4k is it still good to turn off the lpf2?
Пікірлер: 35