I ran 29.5 outlaw 1s with a 15% secondary and it struggled in very thick mud
@JerkyTurnip
2 жыл бұрын
Hey mudpuppy, love the videos. I know your always talking about your next bike but have you considered a 750 brute force. I know it's not near a Honda but it's different and honestly still better them Polaris. Figured it's something to try. Keep up the good work and have fun.
@MudPuppyOffroad
2 жыл бұрын
I have considered them because I love the motor output but the rest of the machine will not load up to my abuse very long based on my buddies
@shanecromer4661
2 жыл бұрын
Bought my first set of Aztexs! 30x9x14 for a honda! They seem to turn fine with no gear reduction
@Hondabuildsandbikes
Жыл бұрын
I just put a 300 primary and clutch basket in my foreman 400 and now it has a strong wine when I put it into gear almost like a dry power steering pump it does it in first gear and reverse I think I may have the centrifugal nut too tight
@reidharris1059
2 жыл бұрын
Awesome info
@biggunaddict2931
2 жыл бұрын
@ mudpuppy quick question I have a 2021 Honda pioneer 1000-5 le I’ve had it a year already and just recently it’s been overheating when doing normal trail riding here in southwest Florida . I installed the thermostat and radiator cap that was suggested as well as fan override switch. It helped some but I’m still overheating when my other buddy’s pioneer is doing the same riding as me but only on 2 bars while I’m on all 4. I burped the system already and all out of ideas. Any suggestions on what it could be ? I’m also having issues with the machine not wanting to shift in to low. Dealership is 3 weeks out before it can be looked at
@cadebradford182
2 жыл бұрын
Mudpuppy what’s a good tire for Louisiana I ride in sand and clay for a Honda rancher 420 sra foot shift
@nickruisoutdoors
2 жыл бұрын
Only time my 2021 p1000 feels like it has power is when I’m bouncing it off the rev limiter lol
@samtheaverageyoutuber4630
2 жыл бұрын
Hey mud puppy you should do a pioneer 500 build
@jessieestock9142
2 жыл бұрын
So how do I get ahold of ya to set up some work on the foreman 500 bought today
@kanindeal2362
Жыл бұрын
I have a Honda rancher 350 with 27” outlaw 1s what size reduction do I need
@jorgemuniz176
9 ай бұрын
Need the information to your shop? I live in Tampa, Florida. And will love for you to install a Gear reduction on my bike.
@MudPuppyOffroad
9 ай бұрын
407 446 2630
@dylanwaldun8890
Жыл бұрын
Get a DCT just to see if it has problems
@MudPuppyOffroad
Жыл бұрын
I had one for a while it was great until it got swamped three times then it was a lot of work to get shifting again
@semajlucas7907
Жыл бұрын
I’ve got a 2016 rubicon deluxe and have a 35% reduction and have 28 sassys and it’s slow at but pulls thru a lot, considering getting Aztecs to help, do a lot of water wheelies but its kinda tough in shallow waters, any thoughts? I’m also in the Orlando area
@MudPuppyOffroad
Жыл бұрын
Aztex are a totally different tire. Much easier on the drive train and itll feel quicker.
@stephaniealtman4021
2 жыл бұрын
crazy question but i know old stock 300 gears in a older 450 foreman made a 15 percent would 300 fourtrax gears work in the newer rubicon fm to make a 14.5 percent
@MudPuppyOffroad
2 жыл бұрын
Nope
@mattaltman6344
2 жыл бұрын
Dang figured I'd ask got stock 300 gears laying around thanks man hopefully see at holopaw sometime bought a lot near north beach
@phonicbeast302
2 жыл бұрын
Welp I'm arguing with this one. I have a clapped 2016 500 Rubicon dct with 29.5 outlaw 2s, it only struggles with stupid thick dry mud. Ofcourse a gr would help but I would go with a small one.
@MudPuppyOffroad
2 жыл бұрын
Yes you have slightly lower gears it's true. But of you sink those real bad things can happen to the valve body
@Brooks_isfrom601
6 ай бұрын
Hey man, like the vid but what type of gr do you recommend for 30 inch all skinny Aztecs on an obs foot shift 420 rancher?
What’s your pricing for labor on a say 40%reduction in a 420
@MudPuppyOffroad
2 жыл бұрын
The cost is about 850 total including reduction oil labor and everything else
@coreymillican7366
Жыл бұрын
I have a 2022 Rubicon deluxe on 28 outlaw 2s do I need a reduction if so what do u recommend
@MudPuppyOffroad
Жыл бұрын
Yes 20%
@austinvenezia9538
2 жыл бұрын
How can I contact you to get a gear reduction installed on my 2022 rubicon I’m in debary fl
@MudPuppyOffroad
2 жыл бұрын
mudpuppygaragemods@gmail.com
@justinsproul4081
2 жыл бұрын
How would a stock rubicon do on 28” tires? Do you need a gr?
@MudPuppyOffroad
2 жыл бұрын
Well on some light like Aztex
@granthollimans5530
10 ай бұрын
What gear rudcion do I need for my 2021 Honda rubicon dct to run 28 zillas
@MudPuppyOffroad
10 ай бұрын
You need to sell it and get a foot shift LOL or just run those tires stock
@JCool101
15 күн бұрын
@@MudPuppyOffroadsame question but I do have a foot shift lol. 2019 rubicon 500. It’s a little boggy uphill in 3rd with a passager. Haven’t done to much mud since installing tires yet to know
@floridamanofficial
2 жыл бұрын
Getting it done as always #mudpuppy
@mattaltman6344
2 жыл бұрын
21 520 I installed a 60 with 30 Aztecs way to much reduction gonna install a 40 my top speed now 25 mph sucks go middle range reduction
@deweyatchison6388
2 жыл бұрын
What do you think your top speed will be with the 40% reduction?
@mattaltman6344
2 жыл бұрын
Probably guessing around 35 somewhere in that ball park I ride holopaw my 520 with the 60 in sucks riding In thick sandy trails takes 4 ever to reach mud hole
Пікірлер: 43