Thank you so much for making this video. I had to take it apart, because I had the water beads jammed in the magazine, and as soon as I opened it all these parts started falling out and I was so scared. I wasn’t gonna be able to get it back together properly so thank you very much. This video was extremely helpful.
@jasonsubie9161
Жыл бұрын
Super appreciate the amount of detail in this video!
@goofy7186
2 жыл бұрын
First! also great content I can tell u take your time to make well thought out videos. I discovered ur channel while I was researching splatrball, I also love modding things so thanks for all the great research u do. I appreciate it!
@engineerable
2 жыл бұрын
Watch the metal gear upgrade video kzitem.info/news/bejne/0oeBx3-afoeBdqg
@QuinnJohnson-ix9sz
3 ай бұрын
Hey! Do you know if the motor/gear machine can get wet? My did and I don't want it to break
@camdenmorgan3093
Ай бұрын
It should be just fine mines been water logged a hundred times and still seems to work
@Evan11111.
Ай бұрын
i can’t fix my mag the bullets don’t come up the little tube, is there any fix?
@KRE3P
3 ай бұрын
I took mine apart when spray painting it and i lost my spring. Could you give the size of the spring and where I could buy it.
@kelenrojas4489
2 жыл бұрын
Bro my "flap" or "trapdoor" came off and now i cant find it, is there any way i can buy one somewhere or do i just need a new mag
@engineerable
2 жыл бұрын
Cannot buy just a trap door. It does look like it would break off easy. Could put some tape over and replace tape occasionally.
@w.agarcii_2172
2 жыл бұрын
At 3:52 did you super glue it?
@engineerable
2 жыл бұрын
No, that was grease for the gears
@w.agarcii_2172
2 жыл бұрын
@@engineerable where can I find the one you used? And what do I need to super glue? The wheel doesn’t spin when I shoot what can I do
@engineerable
2 жыл бұрын
@@w.agarcii_2172 is the motor spinning?
@w.agarcii_2172
2 жыл бұрын
@@engineerable the white wheel no and I just bought it
@w.agarcii_2172
2 жыл бұрын
@@engineerable it gets stopped by the thing you put grease on
@juanagustinagustin7108
3 ай бұрын
Can you do a pulsar pro mag vídeo
@sound6808
Жыл бұрын
Would the gears inside of the mag strip if i use an 11 volt battery, or would you have to replace them with metal?
@engineerable
Жыл бұрын
They should be ok... For a while.
@grrrdffd2316
2 ай бұрын
Easy spring to lose I lost it
@cakegetsrevenge5522
Жыл бұрын
When I was modding the gun the white wire came undone from its soldering and doesn’t power the mag. can re-solder the wire back to its original position so that it powers the mag.
@engineerable
Жыл бұрын
Yes, you need to resolder it.
@juanagustinagustin7108
3 ай бұрын
I took mine apart i put all the screws in i opens a little still
@raymondbetancourt6498
2 жыл бұрын
Does the splatter ball & Lightning blaster have the same clip. Or where can I get an extra clip for the Lightning?
@engineerable
2 жыл бұрын
Splatrball and Lightning Blaster mags are not interchangeable, I have tested. Lightning Blaster should be compatible with WELLS G36C mags, which are available here, but I have not tested these m.zhenduotoys.com/Wells-G36C-Magazine-p746039.html
@DEThobbies
Жыл бұрын
What's the difference? Can't find any magazines anywhere. Did purchase the mag u posted but scared it doesn't fit.
@theayuwoki3569
2 жыл бұрын
Hey great video overall, do you have the mesurements of the gear? It would help a lot.
@engineerable
2 жыл бұрын
I will take some measurements of motor and gear and post a new video.
@theayuwoki3569
2 жыл бұрын
@@engineerable Thanks a lot!!!
@Gravyards
8 ай бұрын
I’m having an issue where my motor spins the opposite direction, making the orbeez not enter through the magazine to shoot it
@wickityb1232
8 ай бұрын
Idk if this will work. Try and reverse the motor output. Or change the directions of the gearbox
@engineerable
8 ай бұрын
Seems like your mag contacts are crossed. Take either the blaster or the mag apart and switch the contact positions.
@Cheftyzz
2 жыл бұрын
Can you also do a tracer mod for the sb400 plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz?
@engineerable
2 жыл бұрын
Working on it! I'm working on a no-solder mod so that it can be done easily without a soldering iron.
@Cheftyzz
2 жыл бұрын
@@engineerable ok thankss
@jonathanaguilera505
Жыл бұрын
I have to put some pressure to spin the motor do you know what I should do?
@engineerable
Жыл бұрын
Pressure where?
@jonathanaguilera505
Жыл бұрын
@@engineerableon the gear thing, is it supposed to move smoothly when spinning it?
@engineerable
Жыл бұрын
@@jonathanaguilera505 yes it should. The plastic can crack and it can get loose on the shaft. Glue it back on with super glue.
@jonathanaguilera505
Жыл бұрын
@@engineerable when I open the mag there’s little orbee pieces squished, the gear does not run smoothly at all what should I do to fix it
@a.p.fortnite2980
Жыл бұрын
hey what is the substance you put on the motor?
@engineerable
Жыл бұрын
Super Lube Grease amzn.to/3JXpw3F
@a.p.fortnite2980
Жыл бұрын
@@engineerable also what should i do if it stops spinning
@a.p.fortnite2980
Жыл бұрын
is it just broken at that poitn
@engineerable
Жыл бұрын
@@a.p.fortnite2980 probably, but could be a few issues. You need to test with a voltmeter to see if your getting power to the motor. Or maybe one of the gears are loose on the shaft.
@jMicc-706
2 жыл бұрын
Do u know why the motor in the magazine ain't spinning
@engineerable
2 жыл бұрын
Could be many things. You will have to debug. First test with a known working mag to rule out an issue in the blaster. If the other mag works, then it could be a burned out motor, loose gear that drives the gel balls (glue it back on with super glue), or loose wire.
@w.agarcii_2172
2 жыл бұрын
@@engineerable do we glue it like in part 3:52?
@engineerable
2 жыл бұрын
@@w.agarcii_2172 that was grease for the gears
@Abdi0967
2 жыл бұрын
My gun isn’t shooting unless the mag is in it what should I do
@engineerable
2 жыл бұрын
The blaster only shoots when the mag is in...
@Abdi0967
2 жыл бұрын
I worded that kinda weird I meant that the gun doesn’t make any sort of noise unless the mag is in it some of my friends blasters would still make the noise even if the mag is not in
@engineerable
2 жыл бұрын
@@Abdi0967 yeah, that is strange, and means that the power is passing through the magazine to get to the main motor. That's not good, and means that something is wrong with the wires inside.
@u4jessii
2 жыл бұрын
Can you do the splatrball gun srb1200
@engineerable
2 жыл бұрын
You want me to take apart the drum mag, or the gun?
@u4jessii
2 жыл бұрын
@@engineerable drum mag
@u4jessii
2 жыл бұрын
@@engineerable do you know why when I shoot my gun an orbee comes out but another obree just roll down the barrel when I ask downwards or ill shoot straight and have the gun pointing down and an orbee just rolls out from the barrel.....any answers please 🙏
@engineerable
2 жыл бұрын
@@u4jessii Sounds like they are not growing large enough. Leave them 4+ hours in water to grow, and you can keep them in water for a very long time till you are ready to use.
@Cheftyzz
2 жыл бұрын
so confused what did you take out?
@engineerable
2 жыл бұрын
I didn't remove anything from this one. This is just instructions on how to take it apart and put back together. This is the video where I take out a divider to expand the capacity of the drum mag kzitem.info/news/bejne/qqxsv4OXbmh2i5g
@Cheftyzz
2 жыл бұрын
@@engineerable ohh
@aubeornguerra9311
2 жыл бұрын
Ye my gun stoped shooting but sounds fine people say it was the mag so I orders a drum hopefully that’s what it was
@engineerable
2 жыл бұрын
Could be some feeding issues also due to the nozzle not retracting far enough. The tappet may be bent or broken.
@aubeornguerra9311
2 жыл бұрын
@@engineerable I don’t think anything in the gun is broken if that’s in the gun or is that in the magazine I haven’t dropped it or nothifn
@engineerable
2 жыл бұрын
@@aubeornguerra9311 I've had some of these not feed out of the box. The tappet is metal and sometimes it is bent out of wack and won't feed. You can tell if the magazine isn't working, because the little gear inside won't be spinning.
@sosori9920
2 жыл бұрын
Mine wasn’t shooting at first n the thing was spinning but I cleaned it rn and now it’s not spinning so what should I do how do I fix it ?
@aubeornguerra9311
2 жыл бұрын
@@sosori9920 idk that’s what happen to me to
@madmanMELLYTV
2 жыл бұрын
My motor in my clip is spinning the wrong way
@engineerable
2 жыл бұрын
You need to switch the electrical contacts on the mag. Hopefully it's the mag that's backwards, and not your blaster.
@juanagustinagustin7108
3 ай бұрын
Its a pulsar pro
@aintevabeenaverage3389
Жыл бұрын
I have the srb400 blue version but there’s a feeding problem the beads don’t feed for some reason any idea why ? Anyone
@engineerable
Жыл бұрын
Very likely that the tappet is bent or broken. You can see the tappet plate in this video. kzitem.info/news/bejne/26mZr6hmi4h9fnY
Пікірлер: 80