Please make it so that keyboard shortcuts like Tab let you switch from one button or field in a dialog box to the next. This has been requested so many times and is just absolutely basic and essentially functionality.
@LearnEverythingAboutDesign
Жыл бұрын
I agree Evan. If you have a dialog with numerical input and click on the first one, say in a toolpath dialog. tab will go to the next one. but it doesn't work for selection boxes and it doesn't just work without you clicking one first.
@endercrafts9056
Жыл бұрын
@@LearnEverythingAboutDesign but tabbing won't go from the last one back to the first.
@LearnEverythingAboutDesign
Жыл бұрын
@@endercrafts9056 It does in some dialogs. If you are in manufacture and start a new toolpath, if you are in the Spindle Speed input and tab you will go through all the dialogs. If you are in an extrude and on the distance box and tab it will bounce back and forth to the taper angle and distance. Is there a specific one you know of that won't tab back to the first?
@wehiird
Жыл бұрын
Please lord!!
@wehiird
Жыл бұрын
I think they dont include this becase it incentivizes folks to move up to inventor
@edenassos
Жыл бұрын
and still no dark theme, amazing.
@davem3325
Жыл бұрын
yep, and still no nesting/panelization in PCB's
@adammonson
Жыл бұрын
Same with no slot and tab feature
@argonprototypes
Жыл бұрын
For milling manufacturing, 2 features off the top of my head I'd like to see are: 1. 2D Contour: Automatic recognition of the best lead-in point to minimize the lead-in tool engagement mark. For O.D. contours this would be the corner edge. (Also applicable for the Flat "profile" unveiled here, which I probably won't use due to this limiting factor and its inferior surface finish) 2. 2D Contour/2D Chamfer: For chamfering, an automatic tip offset based on each contour path's minimum radii that maximizes the SFM of the tool, with an appropriately scaled feed rate. For instance, use the maximum tip offset for 2" holes on the model at full feedrate, and the tip for the 0.1" holes at 20% feedrate. A dialogue box to change the minimum radii path to follow would be nice as well
@davem3325
Жыл бұрын
RE-SIZING dialogs is great, but we also need to resize the width of the component browser tree and the data panel!
@wilddog6060
Жыл бұрын
Native Apple silicon support would be nice. Any update? It has been a long time...
@davem3325
Жыл бұрын
MAC SILICON VERSION PLEASE - ??????????????????
@mab6554
Жыл бұрын
Finally !!! some very important additions in parameters (logical operators and logic functions)
@ksanalyticalsystems2438
Жыл бұрын
Conditional statements in parameters is huge. Parameters allow me to avoid creating hundreds of variant files to begin with, adding conditional statements might cut to required designs by 50%! Great feature! Contours in "flat" strategy will also be very useful!
@davem3325
Жыл бұрын
We also need a customisable NAVIGATION BAR!
@LongLiveCheems
Жыл бұрын
I know this has been said before, but are we ever going to get a dark mode option that similar to Inventor?
@wehiird
Жыл бұрын
Geezus thank gos for the update snooze feature!!!
@davem3325
Жыл бұрын
STILL NO LIVE BILL OF MATERIALS/COMPONENT LIST VIEW!!!
@HK-yo4se
Жыл бұрын
agin a great update. Keep them coming
@stanislav6668
Жыл бұрын
Why there are more features than Inventor has? For example, they still did not implement a rotary machining in Autodesk HSM which is more expensive than Fusion
@tomek_FORCE
Жыл бұрын
Please make the "FLAT" operation able to compensate tool diameter.
@pmcquay1
Жыл бұрын
Maybe stop forgetting parameters of basic operations if they have warnings? I shouldnt have to remember what radius a fillet is because I deleted something 20 operations before it. Also, If I delete a thing, dont just delete related things? I dont understand why the warning state cant be used for everything. In the same vein, a list of operations that depend on an operation would be nice.
@scottwatrous
Жыл бұрын
All these awesome features and no Dark Mode 😒
@steinarne79
Жыл бұрын
Hmm... Get an simulation error when doing lathe work, it says my holder is colliding, no matter what i do with holder shape and insert geometry.
@so_i_learn_3d549
Жыл бұрын
Hello I am so i learn 3D, curious paasio vehicle designer Other problems with siglalés and improved for my part: The slow fusion even with an RTX 3060 (making it possible to use your own graphics card) -Crashes -The work that is lost by merging - performance improvements -impossible to now render in the canvas (it is very very very slow since the last two updates) -the recording of files which is recorded ad infinitum when you want to close fusioon -the addition of movement kinemaatics from the view port (similar to software, belender, cinema 4D) -improved management of T spine errors because sometimes there are invisible errors and you can't see them (use the iac) - improvement of the correction of errors in the timeline, because fixing all the errors manually is very very long -adding a dark mode -improve file exportation and opening Thank you for this great software
@rdsully1221
10 ай бұрын
pleaes include mesh functions show up in the parametric timeline.
@jc4523
Жыл бұрын
Does fusion360 have a broaching process?
@dalecollison791
Жыл бұрын
And still waiting for iges output for tube lasers. So many have been asking for 3 years now. You can change the outputbin inventor now but still not fusion. Frustrating to have to continually go to solidworks to re save all iges files.
@meanGoreng
Жыл бұрын
still wanting the ' maya style ' navigation controls option. please. after all this time. please why is this important ? moving between so many apps that all support the option. jump into fusion and the cognitive load of making the switch throws you out of rhythm
@joearledge1
Жыл бұрын
Has anyone else been having insane problems with fusion over the past week or so?? I've got the free version, and I'm fairly new. I only have one design started, a simple bullet mold for my first project. Fusion was working ok, then started bogging down, locking up, and crashing. Thought it was my laptop finally not being able to keep up. So, I bought a new one that has double the requirements that autodesk lists(RAM, graphics, ect...). Other than what came on the laptop from the factory, Fusion was the only thing on this new comp. I did all of the updates for the computer and fusion. Then tried to draw a 1.5" line and fusion locks up and crashes. Same thing happens if I try to delete a line, or do anything else really. Fusion says they don't support the free version, and their website won't let me post to the forums. I reported that to Autodesk, who said they couldn't identify the problem 🤦♂️. So I got on with tech support for the new computer, we tried everything, ending in a factory reset. And fusion still doesn't work. I'm not trying to reengineer a flux capacitor. I'm trying to make a simple bullet mold and learn cad, cam, and milling. Anyone had similar problems or any advice? At this point I can confidently say that if I ever get to the point of buying cad/cam software, Fusion will absolutely not be it. Product doesn't function, no support available, no ability to post to forums to ask questions, and no customer service for that either...
@Te4mUp
Жыл бұрын
Buggiest software ever please pay employees to bug test or like fix the bugs from 2013 that are still present for some reason
@odwakacjidowakacji
Жыл бұрын
And laaaagy, especially in the electronic design (pcb 2d, 3d),
@sofain4932
Жыл бұрын
I agree its always been so laggy for me too I hope they fix that.
@TYKE-NO
Жыл бұрын
DARK MODE! DARK MODE! DARK MODE! DARK MODE!!!!!!!!!!!!!!
@taqizaidi1890
Жыл бұрын
Mold parting line calculator
@fimishaqua4849
Жыл бұрын
Great update... Love the option to delay the version upgrade... however it would have been good if you had provided the option to completely skip the upgrade. That way people using older computers would still be able to use the older versions without any lag or slowness of the software (knowing they wont get the latest and greatest updates of the software). This also would help them focus on their work and not worry about upgrading their computers because latest versions of fusion 360 is slowing down on their older computers. I also loved the option where now we can resize the options and dialogue boxes. Gfeat update overall.
@KINGCAIMAN
Жыл бұрын
Whats new is that they are removing features from the student version now you cant convert mesh in prismatic mode unless you pay 400$ a month.... thats whats new
@sualpozel1
Жыл бұрын
I am the product manager in charge of that feature. I also teach Fusion 360 to my students at a local university as a professor. I can tell you with authority on the subject that we did NOT remove that feature from the Education License (Student version) of Fusion 360.
@ExploringTheSimulation
Жыл бұрын
@@sualpozel1Can you please ask to be in charge of dark mode? Thank you :)
@sualpozel1
Жыл бұрын
@@ExploringTheSimulation 😀 I am sticking to what I know best.
@ExploringTheSimulation
Жыл бұрын
@sualpozel1 Every update the comment section is full of people asking for it. Just check the top comment for the April update ;) Surely, as a Senior Product Manager, you know the right people to make it happen 🤞 Thank you for your answer.
@garrettslobey9204
Жыл бұрын
Let us organize the sheet metal list, not by just when the size was created! So annoying
@patrickcarpenter6258
Жыл бұрын
Tokens. WTF. HAHAHA micro transactions in fusion. Hot
@waytospergtherebro
Жыл бұрын
Now it'll crash 20 times faster than ever before and refuse to re-calculate even more parameters because Autodesk only hires the worst Python engineers money can rent.
Пікірлер: 45