I think your next monthly mayhem needs to be to get these to crawl 😂😂
@creamyhummus
Жыл бұрын
This is an absolutely perfect idea!! 😂
@holdenrr3650
Жыл бұрын
Yes please 🙏
@just_inolredneck8319
Жыл бұрын
Yes 🙌
@rcmike09
Жыл бұрын
But it must keep the hopping capabilities
@thomasbialzik3060
Жыл бұрын
"I'm gonna review this thing....aaaand chop it RTF in half." You show no fear👍🙂👍
@PhilBender612
Жыл бұрын
1:45 ...Now that was funny!😆🤣
@shawnfugere6763
Жыл бұрын
Always loved the look of a lowered K5 Blazer...
@sshiko3135
Жыл бұрын
I think "Donkey Cruiser" will be perfect fit for it 🤣
@Austintyler5
Жыл бұрын
RC lowriders, literally minutes of fun!!!
@paulclancy2404
Жыл бұрын
Lol I just want the body oh I take reef servo too
@toastypotato185
Жыл бұрын
You should totally do a 90s ford ice cream van for that build I am not a fan of the Land Cruiser it just doesn’t go with it but still Awsome vid as always ❤
@tomkrushlin
Жыл бұрын
The name should be. SLAMMED. Really love that car trying to save to get really like the build. Love the show
@ProjektONE
Жыл бұрын
Love how its laying frame or as the streets say.. laying on its nutz..
@zdattonejones6709
9 ай бұрын
I appreciate that you are very informative and also you are very articulate I like that you keep your room in order very nice.
@scalebuildersguild
9 ай бұрын
Thank you! I appreciate you watching the video (and the mess is all hidden 😂).
@zdattonejones6709
9 ай бұрын
Thanks for sharing the gifts you send.. R.C world forever.
@richw9205
Жыл бұрын
The perfect body. I canNOT wait to see what you come up with on the "LandHopper" You best be putting spinners on it!! 🤣😂🤣😂
@SwampersRC
Жыл бұрын
The '59 is my favorite too! I would leave the skirts off too. Now that you've ruined the chassis send me the '59 body!😂
@PeterCPRail8748
Жыл бұрын
This is build is very intriguing. You got me glued to the screen for this one.
@scalebuildersguild
Жыл бұрын
Thanks for watching!
@SINNER_01
Жыл бұрын
Ok... I personally believe the body you need for this rig is a 70s- early 80s squarebody Suburban. Patina body with the old school white steelies. Absolute show stopper.
@zamoragera13
Жыл бұрын
I did the same thing. I bought a extra floor pan and frame. Extended it with c channel and extra plastic. Using a vaterra suburban as body.
@slowriderrc4790
Жыл бұрын
“This Tolowta is going to be fantastic” 😅🎉😂
@purepr2010
Жыл бұрын
Lowrider can be any vehicle, it is more of a mentality than the vehicle itself. I use to lowride back in the day, those rear skirts you were trying on are called sidewalk skirts. Can't wait till you finish the build.
@paulclancy2404
Жыл бұрын
Man 59 impala was the best one. Little before my time but a American beauty.
@ShanGamer1981
Жыл бұрын
I dig that lowrider, im humming ice cube was a good day
@LRCR
Жыл бұрын
Heck Yeah Matthew Glad to see you enjoying the Fifty Nine Lowrider (mine in Blue too) I think @redcatracing and @jeveries done a Great job scaling these model's in detail 💯 That's a really neat way to extend the chassis to make it fit the rover body can't wait to see what you're creative mind and engineering skills do with this project 🎉🎊🎉 Lastly, if'n You're not gonna do anything with the extra chrome part's then I'm interested in them for my 59 Lowrider in Blue to "BLING" it out LOL 😁 ✌🤠👍 HFLPRCing =Having Fun Laughing Playing and RCing 👍😎👍 AOAH =Association of Addicted Hobbiest 🙏 SSPH =Stay Safe and Play Healthy My Friend
@scalebuildersguild
Жыл бұрын
Stay tuned! Thanks for watching and have a great weekend!
@big_surly
Жыл бұрын
You should airbrush “praise the lowered” on the tailgate!
@scalebuildersguild
Жыл бұрын
😂
@MWall711
Жыл бұрын
Nice LDC-23. Low Down Cruiser ‘23. 👍
@davidbayley4441
Жыл бұрын
the black body and chrome wheels makes it look like a london taxi
@jenslothert7129
Жыл бұрын
Hi mate, have the same body LC105. A friend of mine made it long time ago. Takes 2 years to get it done. Unfortunaly the mold is gone. Didn't done a lot of them. Mine is close to finish on a run-80 chassis. Best wishes Jens
@Yarjammer
Жыл бұрын
That 200 looks like a Subaru Forester on that chassis... That could be an interesting build 🤔
@petechipps9770
Жыл бұрын
I was hoping for an SUV body. Great stuff Matt!!! Would be sweet to find a Volvo body tho 😅
@jasoncurrie475
9 ай бұрын
I've been having trouble with my transmission on my 59 but there is a fix for it my gears kept wearing out whenever I would drive at full speed with the factory electronics turned all the way up. Keep in mind this was a stock setup I just increased the settings to the max. The gears seemed to self destruct. The fox that I've found was to add little washers on opposing gears(meaning one per gear) . My transmission seems much quieter now and able to drive at full speed without self destructing.
@_Sphaxz_
Жыл бұрын
I've enjoyed my 64 way more than I was expecting when I got it. This thing definitely needs to end up with some CEN f250 or f450 wheels
@ed0c
Жыл бұрын
oh you need the gold daytons for that sled!
@rc_corner
Жыл бұрын
Highlight of the week! 😊
@scalebuildersguild
Жыл бұрын
Thanks!
@stabbyjosh7931
Жыл бұрын
I think a van body, or even VW minibus would work great!
@jasonbecker4997
Жыл бұрын
I really dig the low riders Redcat put out. I just don’t know if I would run more than a couple batteries through it before I got bored and it just sat on the shelf looking cool. If I was more of a modeling guy, I think it would be a great project to customize and really make it look awesome.
@Highridah64
Жыл бұрын
mines been sitting since i got it, was fun for a few hours figure the kids could play with it and they all hate it because its not fast
@thomasbialzik3060
Жыл бұрын
That thing IS pretty cool. I was laughing like a kid when you were hopping the front end continuously 🤣
@claytonrc259
Жыл бұрын
Thank you. Ive been waiting to see someone do this.
@jamesn.449
Жыл бұрын
Deep dived lowrider land cruisers, found one from Australia with a roof top tent. Don't think it was the same series tho. Not going lie I liked it 🤷
@stevenmadison6706
Жыл бұрын
Can’t wait to see how this turns out. I always enjoy your videos. I’m thinking El Chapo.
@VermontScaleCustoms
Жыл бұрын
“Florida Man” because, you may not be aware, but you’d almost certainly see someone in that state driving a 100 series with it slammed down tot the street top WITH those wire wheels on it. Basically, you’ve nailed the look already, Matt.
@anthonysmalawipredators8794
Жыл бұрын
I've been waiting patiently for you to get one of these and give it the SBG touch!
@Subrina_OBS
Жыл бұрын
Project slam cruiser!!! Love your content and SBG.
@scalebuildersguild
Жыл бұрын
Thanks! 👍
@laserbeam1620
Жыл бұрын
I can't wait until episode 500!
@forrestcrabbe
Жыл бұрын
You could call it the bouncing brit 🤘y'all have a badass day🤘🍻🤘
@scalebuildersguild
Жыл бұрын
🤘
@brandaneakright6082
Жыл бұрын
Honestly I’d stick with the 59 impala body, but that’s my opinion and not my rc either. It is different though running the Land Cruiser body though, keep up the good work.
@amosburton164
Жыл бұрын
Oh man!, I can't wait for episode 69 now....hehehe....
@SFDFLATH12
Жыл бұрын
The Toyota Slan'Md Cruiser or the Toyota Urban Excursion Limited (combining the Toyota and Ford badges) would be cool names. You could even name it the Toyota Limbo Cruiser.
@Sysiphos
Жыл бұрын
Limbo Cruiser would be great
@jefferybeattie74
4 ай бұрын
I ordered the Continental kit and the gold and chrome wheels, and the jevries club plaque
@scalebuildersguild
4 ай бұрын
Enjoy!
@Goat67
10 ай бұрын
I almost had a stroke when you were taking the saw to the chassis
@Andy_Yates
Жыл бұрын
I thought these looked good in photos, but wow seeing it on video really shows how cool the bodies are. I wish somebody made a 51 Ford Victoria body. I could have an RC car to match my car :). Maybe I could find an STL for someone local to print
@scalebuildersguild
Жыл бұрын
Cool!
@LukazRC
Жыл бұрын
Need ideas just look up them in Australia I've seen slammed 100 series on bags here but never juice... My mum actually has a 100 series LandCruiser but it's made for off road an towing I love driving it.. it's done a few trips around Australia
@TheTankRC
Жыл бұрын
Looks like this will be an interesting project. We'll done
@scalebuildersguild
Жыл бұрын
Thanks 👍
@jamesdavenport4583
Жыл бұрын
I was a little horrified when you cut through the chassis of a $500. + RC car. But the new car has a lot of potential to be like an organized crime bosses car. Maybe go that direction and call it the King Pin. Maybe get a Scarface action figure to go with it.
@RCBadasserie
Жыл бұрын
WOW ! Cool Matty!
@gemsynrc9605
Жыл бұрын
Comes with a 50/50 warranty. If it breaks in half, you own both pieces.
@nikolasbright9207
Жыл бұрын
It’s the Low Two Hundo!
@inikobmore30
Жыл бұрын
Nice, I cut my monte carlo a couple months ago to fit a caddy body I printed.
@ricksmith5755
Жыл бұрын
It be cool. Looking good
@nuge74
Жыл бұрын
Fun build for sure! How about TOYLOWTA lol
@scalebuildersguild
Жыл бұрын
Hahahahaha YES KEVIN!!
@Ruckus_Crawler
Жыл бұрын
The landhopper haha
@beercheersrccrawlers
Жыл бұрын
Drift wheels...some sweet 3 wheel broadies..
@Jmoody818
Жыл бұрын
Thought it was going to be an Escalade at first haha that would’ve fit the culture well but this is going to be super cool and unique. Excited to see where it goes
@CTBeatsEntertainment
Жыл бұрын
Well… you have “Jelly Bean”, it’s only fitting to call it “Gobstopper”…
@rileysvideos2059
Жыл бұрын
Gotta put some speakers in the trunk, I saw rcsparks put a lol bluetooth speaker in his rc Raptor, and call it BoomBoxx
@scalebuildersguild
Жыл бұрын
Neat, that's not for me though. Hate hearing music come out of an RC truck!
@ateaserc
Жыл бұрын
Name…. Hmmm…… Swamp Donk-E. Weather it heavily with some CEN wheels and low profile tires.
@darylbarter9931
Жыл бұрын
love the body choice , good luck
@scalebuildersguild
Жыл бұрын
Thanks!
@Xofroggy
Жыл бұрын
I had a 64 sold it after stripping 2 trans gears just cruising around
@JDMJDK
Жыл бұрын
It hops man!!!!!
@phantomworkz5000
Жыл бұрын
Surely with that body it's now a Land Rider Not a Land Cruiser, looks like its gonna be a fun build.
@Jeeplee_rc
6 ай бұрын
Gotta make a new episode on this project!
@joshuanovoa6877
Жыл бұрын
Love how you said Josh would be fired for video editing and then don’t update the intro
@Tom-ux2tr
Жыл бұрын
great idea can't wait for the final design
@NBC_NCO
Жыл бұрын
I've only seen one in Texas... Perhaps L.A. I would be tempted to put that impala body on a monster truck type platform.
@CornholioMcGeeRC
Жыл бұрын
Did you say episode 29 and then the graphic say 28? Just asking. Always love your content. Did you do that on purpose?
@scalebuildersguild
Жыл бұрын
Sometimes the best of us make mistakes.
@rcpatinaguyllc2655
Жыл бұрын
I think monthly Mayham with that 59 chassis speed demon would be Siick
@King_Bob_The_Third
Жыл бұрын
I must admit you are quite insane! 🤣🤣🤣
@sukatash07
Жыл бұрын
If ur trying to be creative then the LC body is good, else maybe one of the Chevy blazer bodies like the Traxxas Chevrolet Blazer (1972) or similar would be more scale . Either looks like a fun project. Good luck
@ryurc3033
Жыл бұрын
Ever since these came out I instantly thought of the purple Jesse James lowrider 40 ford body that's 1/6 ish scale....(that has sat on my shelf for 4 years). I have debated slapping slash guts under it to make it move, but that's not very lowrider. As for the name of it... slamd cruiser
@paulclancy2404
Жыл бұрын
Lol I have that car too somehow door missing . That's good idea I never though of using slash I'm going see if I still have it
@BrothrBob
Жыл бұрын
Holy sh*t Matt you cut the chassis? lol can't wait to see what you come up with. But I can dig it.
@rcstories_ca
Жыл бұрын
Missed opportunity to make a Volvo wagon low-rider! Just kidding. Looks like a fun project.
@scalebuildersguild
Жыл бұрын
Next time 😂!
@ateaserc
Жыл бұрын
I can’t wait to buy this on eBay. “Why did I cut this in half” category
@scalebuildersguild
Жыл бұрын
More like, "YES! He cut it in half!"
@DonsRCworld
Жыл бұрын
Great vid Matt! Definitely felt the RC Everyday vibe on that one.
@scalebuildersguild
Жыл бұрын
Awesome! Thank you!
@williamslakescaleoffroad4986
Жыл бұрын
The Slamd Cruiser.
@BlackSmithRC
Жыл бұрын
Looks Awesome with that body. Gotta put some "sounds" in that build most definitely bro. MIDWID!
@gatorrcgames
Жыл бұрын
This will be a fun build to watch you build.
@mitsuman5555
Жыл бұрын
It would be cool to take the Monte Carlo version and add accessories to make it look like the 1:1 lowrider the guys from Roadkill took off-road. I wonder if anyone in the crawler community has done that.
@_Sphaxz_
Жыл бұрын
I've actually thrown around that idea quite a bit. Just haven't pulled the trigger to get it yet.
@DozerBoyRc
Жыл бұрын
Project name... Slammer!! All day!! Would the escalade body fit? Just curious.
@erichawkins6231
Жыл бұрын
The Toyota is a great choice way to make things interesting
@chrisquigley2580
Жыл бұрын
Call it the "landscraper" or "landdragger"
@kevinp2820
Жыл бұрын
Kewl project Matt! Since you are making a LC low rider how 'bout turning the 59 into a crawler? I know, I know, RedCat did it with the 64 and it was unique but a properly done 59 like you would build would be freakin' awesome. Just saying. Lovin' "What's on the Bench" !
@jan8662
Жыл бұрын
The long rider! :D
@Daithlee
Жыл бұрын
Please please PLEASE put a sound system in there. Also, I need it to have a Cali tag on the back or if Florida of you going for a Miami or maybe Jacksonville thing.
@scalebuildersguild
Жыл бұрын
Pass! I'm not a fan of music in my RC's.
@Daithlee
Жыл бұрын
@Scale Builder's Guild I hear ya...but its all about scale, right? Show me a lowrider that doesn't have a decent sound system lol. Driving a lowrider may not be your thing too but here we are hahahaha.
@payupsuckarc
Жыл бұрын
Midnight in Montreal
@gxtxRCcrawling
Жыл бұрын
mann looks super fun this rc love it funny stuff🤣🤣🤣
@mrchucklesssss
Жыл бұрын
Should’ve done a jeep ;) This is an excellent series and I love the soon-to-be Landhopper!
@Lokithefeline
Жыл бұрын
the land slammer? Low Cruiser XD land bouncer?
@richw9205
Жыл бұрын
I think the term now is drip. ??? That may only refer to how one may dress. No clue. I'm cool with bling.
@MatthewJorgensen1968
Жыл бұрын
Lowyota... Pavement Princess...
@joshheitzenroder365
Жыл бұрын
How about a Bro-dozer dancing dually?
@grantt4279
Жыл бұрын
Rad Rover 👍
@mikeymike3240
Жыл бұрын
The Hearse 😊
@jimsrc2196
Жыл бұрын
You couldnt just swap on longer links with longer driveshaft and cut the inner fenderwells on rear?
@scalebuildersguild
Жыл бұрын
No, the servos that control the rear axle would be out of proper alignment. Plus, it would be a pain to redo the inner fender wells. This is the quickest, and easiest way to modify the wheelbase.
@justinomarino
Жыл бұрын
You could call it “livin that lowlife” or straight up “lowlife”.
Пікірлер: 244