Yo Jeff , you the man . I ain't never had a father to show me all this stuff but watching your videos and listening to your vivid explanations kind of gives me an idea of how that would be like. Thanks a lot !
@jessiegardener8699
2 жыл бұрын
My dad died before I got a chance to need help with this kind of stuff and Jeff is great isn't he!!
@Jodyjo99
2 жыл бұрын
That’s actually fuckin awesome man. I had my dad but he was a business man and was great despite some bs but he was a immigrant also so I had to figure out all this kind of stuff
@michaelleftwich8186
2 жыл бұрын
I'm like you. Never had a dad. Everything i know, i had to learn on my own. Had frie n dd that i lived with that taught me stuff, but it would of been better if dear old dad would of stuck around.
@privatedankgaming353
Жыл бұрын
No double negatives. It’s I never had
@BigNasty.7314
Жыл бұрын
@@privatedankgaming353who cares?
@robertgiresi9515
4 жыл бұрын
0:13 - 0:22 Love the wry smile after the dad joke! OK, I just had to comment that before I go on and watch the rest of the video!
@m.campbell2776
4 жыл бұрын
You are the most knowledgeable contractor I've ever seen. And an amazing instructor .
@HomeRenoVisionDIY
4 жыл бұрын
Wow, thanks, I still have plenty to learn, but happy to share what I have learnt up to this point. Cheers!
@oldskoolwayy
4 жыл бұрын
Im new to jeffs channel and came across it by just scrolling through the KZitem timeline..I click on a random video and within 5 minutes of hearing how he explains everything and just his overall knowledge entirely made me an instant fan..I just sit and binge to his videos and try to soak up everything he says..
@patten1706
Жыл бұрын
I never got involved in anything construction or mechanical. I am now 51 years old and have been embarrassed on many occasions wishing I knew something/anything. What’s a “five eights”? I sincerely appreciate these videos and the demeanor in which you handle yourself, Jeff. I don’t care what money you make from this - it’s not enough. You have helped thousands upon thousands of people. How awesome to have found your purpose and it being to teach people what you are passionate about. Thank you.
@michaelgoglia5119
8 ай бұрын
5/8 of an inch. No need to be embarrassed, even people 30 years into construction will learn new things. Its vastness can be extremely humbling
@iamamish
4 жыл бұрын
Oh this is perfect! I've long wondered what the differences are between all these fasteners. The clarity of your explanations is amazing.
@HomeRenoVisionDIY
4 жыл бұрын
Glad it was helpful! Also very important. projects can fail when you use the wrong fastener. This should help to protect DIY'ers from problems. cheers!
@BarryHull
2 жыл бұрын
Each time I start a project I have to refresh myself on which fastener to use because it's not something I use everyday. This is a great video to keep all the info in one place. Thanks and thumbs up.
@oldskoolwayy
4 жыл бұрын
OMG every time I watch these videos the information is soooo much i never heard before that i have literally go back and tear down all of my home remodeling projects and start over and get the right materials for the space..So I guess its back to the starting line...
@nlh1623
3 жыл бұрын
3:15...my mind got blown right there....Thank you for that information!
@MarkSmith-js2pu
Жыл бұрын
Wow, I un-retired 6 months ago and took a job in a popular, (not big box) chain store. This info just made me better there in so many ways. Subbed.
@dscritter614
3 жыл бұрын
Wow! Thank u. That worked out much better than the Home Depot trip would have.
@lindabrockett3741
4 жыл бұрын
Don't stop sharing! Love your help. You have no idea how much you have helped. Thank you lb
@arctichare8185
4 жыл бұрын
Thanks again, so much! QUESTION: Is there a trick to consistently, successfully using a T-50 STAPLER? Throughout my life, I have used at least 30 different T-50 staplers. Each and every one of them fail. And I presently own 3 or 4. Often the staples jam, often they do not drive the staples out at all. It is extremely frustrating. Very seldom have I been lucky enough to use a complete cartridge of staples without the stapler giving out.
@stevesoto5388
4 жыл бұрын
What you called a pan head is actually a flat head, and vice versa. Love your videos!
@xl600mine
4 жыл бұрын
yup, he got it backwards
@thebestcdub3041
3 жыл бұрын
Yes
@Remrie
4 жыл бұрын
Thank you for putting this together. Would you mind doing a quick one on types of bit heads in your spare time? Philips, flat head, square, hex, torx, etc. There are a lot that are confusing and frustrating, especially when they strip. It might be worth including products like screw removers that drill a screw out if they are stripped. Keep up the great work. You are a great role model and mentor, and your videos have been a lifesaver.
@jaymefunny7424
3 жыл бұрын
Omg! This is my favorite video! I have zero clue about screws and this will be my go to!
@JosephGuimarin
4 жыл бұрын
You know, I don't really plan on doing any home renovation, and I'm not sure how I found your videos, but I just wanted you to know I enjoy them very much, and now if I have to do home renovation, I now feel like I know more than I did yesterday.
@dmytroverdysh5220
4 жыл бұрын
Hi Jeff! How are you? What is the best place to buy screws in bulks? Thank you in advance!
@chencho7083
4 жыл бұрын
You can't erase the perma smile in the face. Awesome videos...
@DiHandley
4 жыл бұрын
So many tips...so little time. Brilliant!
@tsnorquist
4 жыл бұрын
One thing I've found working in the field with Tapcoms, stick s piece of wire in the predrilled hope then screw in the Tapcom. It really makes a heck of a difference in the hold.
@WatchinDWorldGoBy
2 жыл бұрын
0:19 Jeff took a moment to appreciate his awesome pun :D Amazing content as always
@wendysomerville9830
Жыл бұрын
Hilti has had the shot concrete tools for years. My hubby used to work for Hilti and we own a couple of those guns.
@lcook0825
4 жыл бұрын
This was the greatest video I have ever seen on fasteners. Thank you so much.
@HomeRenoVisionDIY
4 жыл бұрын
Wow, thank you! Cheers Larry, I am glad it was helpful!
@jamestierney7136
Жыл бұрын
Jeff, I bought a cabin and had to gut it and redo the entire inside and your videos have been awesome. Question for you though. I'm almost done with the drywall and I have a ton of left over screws. Can I use them on the subfloor? I would like to put a screw where every nail is (as you showed in a video) to fix the squeaky floors before I pour some self levering compound and then LVP. Thank you
@gergemall
3 жыл бұрын
I’m getting things completed slow but with your instructions I’m more confident . Thank you Jeff.
@debbino4249
2 жыл бұрын
I love everything about this man! Perfect teacher, real sense of humor, very knowledgable. I think Jeff is from Minnesota., Michigan, or Wisconsin...? It's that certain twang that is like home sweet home to me.
@stapeld
4 жыл бұрын
1940’s house with hardwood flooring in 2nd floor bedrooms that squeak badly. I want to carpet the bedrooms so do I use flooring screws through the hardwood to the joists or rip up hardwood then lay carpet? I really like your Channel. Very helpful ideas.
@grantryder5463
4 жыл бұрын
When do you recommend screws are used versus nails or nails versus screws? e.g. you showed a drywall screw and a drywall nail. Great video!!
@oneundecided
8 ай бұрын
Thank you for this video. What screws do you recommend for the 0.5-inch plywood or OSB external walls to connect to 2x4 studs? Would drywall screws work? The siding will be installed on top.
@vikentijslauruts2153
4 жыл бұрын
I really like these 5-20 min ones Nice job, thanks!
@stephanietanner7815
4 жыл бұрын
So helpful! I have marked it for future reference!
@raymarkalex1
4 жыл бұрын
Time to start nailing our DIY jobs!
@HomeRenoVisionDIY
4 жыл бұрын
Cheers Mark!
@jackt6112
2 жыл бұрын
I needed to know which screw to mount 7/16" OSB sheeting to 2" x 4" studs inside my garage so I can mount anything anywhere on it without special brackets etc. - Based on your video, it appears an 1 1/2" construction or flooring screws would be best. - I want to just want to use clear poly over the OSB. Any idea how to get the mill stamp off the middle of it? - Which head drive type? a. Torx by far can take the most torque without rounding out the head or bit, and all high-torque screws use them. b. Robertson/square has one advantage over the Torx and that is that the bit doesn't fall out in the horizontal position thereby freeing up a hand to position or steady the work when you are running in the screw. Users don't seem to have many issues with it rounding out the head so apparently it is adequate. c. Phillips advantage is it is the most common and doesn't require a special tool nor even an exact size bit to match. However, it requires considerable downward pressure to prevent it from stripping out the head and tool which often happens. However, I just bought a driver (based on one of your videos) instead of using a drill, so maybe with a driver this is not much of an issue? *Which do you most commonly use? Thanks!
@scheibs556
Жыл бұрын
This is the best content for diy I have ever seen. Simply amazing stuff
@jasonpakkala9015
4 жыл бұрын
I'm interested in the drywall to drywall screw for covering popcorn ceilings. I haven't seen that covered in the drywall series.
@urspecial2me
2 жыл бұрын
Your dad jokes, intentional or unintentional, are great! This info is key for me. Thanks for doing it.
@funbobby170
2 жыл бұрын
Thank you so much for this video! I'm wondering what the rule is for screws into a joist. So if I never want to put a screw more than 1 1/4 inches into a stud what does that mean for a joist since they tend to be wider? Since I'm asking, I'm working on suspended 2x8 foot shelving for the garage. Would love to see a video on that and how you would approach the project.
@hamana2011
4 жыл бұрын
listed under Listed this video under a Public List "The Best Reno Videos for DIY Beginners (RenoVision DIY)" Great Job
@AD-so9vj
2 жыл бұрын
Great Video!! Could trim head screws be used to secure stair threads that are squeaking. The threads are not accessible from underneath.
@bigred0792
4 жыл бұрын
Great channel. All your videos are great but your drywall videos are the best on KZitem! Keep it up!
@justinstrickland4199
2 жыл бұрын
This guy NAILED IT
@cloroxbleach6673
4 жыл бұрын
I did not realize how much I needed rhis video until I watched it
@HomeRenoVisionDIY
4 жыл бұрын
Cheers to that!
@JNatella
3 жыл бұрын
You made quick mention that you can use the laminating screws and some joint compound to adhere drywall to existing drywall without needing to hit the studs? Did I hear that correct? I don't know if I'd trust this on on the ceiling, but I am going over a whole house in 1/4" so just wanted to confirm I'm hearing this correct, would DEFF make things go quicker
@EmbraceTheMatrixFineArt
4 жыл бұрын
Thanks a lot for this video. I started doing rehabs on rental units recently and have been challenged with repairs/tasks I've never done and this channel has been a lifesaver. Thanks again for your awesome presentations!
@HomeRenoVisionDIY
4 жыл бұрын
Glad to help, Cheers to Rehab!
@benmooreman
4 жыл бұрын
Good content. Very helpful topic. One correction though. Seems you switched pan-head and flat-head wood screws. Flat-head are flat on top, not the base where they contact the wood.
@mikezieg80
Жыл бұрын
Love the 5/16 hex head for doing my 4x4 carport.
@sylvainjackson2
2 жыл бұрын
Great video(s), and thank you. Question if I may. I’m a new homeowner and in the spring early summer, I’m installing 2x Margelles. What are the best fasteners to install them in concrete, but I was hoping that I could set them in place with glue…. Is it possible? Thx and happy 2022, and keep-up the good work.
@bllewis52
3 жыл бұрын
Thank you so much. Great information with applications.
@PartyAnimalzEnt
4 жыл бұрын
Thanks Jeff and Max!!!! Awesome Video as always!!!!
@slee00316
4 жыл бұрын
Love all of your videos! I have been working on my house with your videos. I have few questions 1. I was wondering what type of nail or screw to attaching wood shelving to concrete block wall? A lot of people told me to use tapcon but I would like your advise. 2. I am trying to rebuild a steps in my garage. But not sure if I need to use whole stair out of Pressure treated lumber or just the last piece where it contact concrete floor. Need your help!
@willb3018
4 жыл бұрын
Thanks for this. One of the most useful videos for DYIers. 👍 👍
@HomeRenoVisionDIY
4 жыл бұрын
Glad it was helpful! Cheers!
@pierre-marcrioux5015
4 жыл бұрын
Awesome Video Jeff!! Saving this one for re-watching whenever I'll have work to do...! Thanks! 😊
@StevenFarkas-j1n
2 ай бұрын
Thanks Jeff. Love your videos. But I went to Home Depot yesterday and couldn't find any screws labelled "floor screws". I need some screws to attach wood plank subflooring (1 3/4 inch thick) to the girders/joists below. Everbilt has a 3 1/2 inch exterior wood screw, but it doesn't seem to have the small and large threads you demonstrated. Can you give me a list of recommended screws I can purchase, either on-line or at a big box store, for this purpose? Thanks.
@ShayBelladonna
4 жыл бұрын
It’s like you’re in my mind with these videos! All so timely for me rn 👏🏾👏🏾👏🏾
@alexill
4 жыл бұрын
You absolutely nailed it Jeff #cheers
@HomeRenoVisionDIY
4 жыл бұрын
Al Your comments are Perfect Every TIme. Cheers!
@triptonmiller8532
Жыл бұрын
I grew up in a house where the men only had 1 multitool in their box...duct tape. In the past 2 yrs I have purchased more tools n relied on KZitem for instructions. This video is very informative. I am currently looking for a way to attach a steel fridge slide to bullet proof lined 3/4" oakwood and I am stumped on which screw to use. The supplier did not provide the hardware for this slide. Ridiculous n rude in my opinion. Do you have any advise on what I should use. All the company advised was an 8M screw.
@Chris-xc1tm
4 жыл бұрын
I'm facing this problem right now. A second layer of drywall is half inch or strapping and drywall 1 inch. How do you extend the electrical boxes in the ceiling? Box extenders only come in 1 1/2 and are not rated for ceiling fans. Been wracking my brain all week over this one while I'm finishing the other work. Thanks Jeff, you have saved me a fortune. Maybe when I'm done this I'll try Gatorbase and throw down some new interlock. Digging down 6 inches would kill me but luckily you taught me how to open a cash account at wholesalers.
@HomeRenoVisionDIY
4 жыл бұрын
Cheers Chris. Where I live they sell a 1/2 octagon extension box and you can hang a fan on it no problem. Let me know what you think of the gatorbase. Cheers!
@Chris-xc1tm
4 жыл бұрын
@@HomeRenoVisionDIY I found the half inch octagons this time. 7 bucks each! Hmmmm, Jeff would never pay this much for a band aid solution. So I stomped over to the wood aisle and found full inch whitewashed planks for 5$ and one shimmed all the boxes with tons left over.
@brendanconley3095
4 жыл бұрын
Thank you so much for this video. I am about to rebuild our deck and your videos have taken me to a place where I am fairly confident, and the biggest concern I have had is making sure I get the correct fasteners and using the right ones in the right spots. Can't wait for more!
@mossimusprime3315
4 жыл бұрын
Max, your camera skills are on another level! 👍🏼👍🏼
@HomeRenoVisionDIY
4 жыл бұрын
Dude Is the Boss!
@maximusdecimus45231
4 жыл бұрын
The video that we have all been waiting for :)
@HomeRenoVisionDIY
4 жыл бұрын
Cheers I hope this helps a little!
@briansobb19
4 жыл бұрын
Covering a popcorn ceiling..... mind blown.
@christopherrockel2676
3 жыл бұрын
Hey Jeff, thanks for another amazing video. What are these little metal plates, that go infront of the drilled holes, called?
@paulojimenez3316
4 жыл бұрын
This is sooooo informative for DIYers. Good stuff!
@beanhan4766
2 жыл бұрын
Hi Jeff, I need to build a raised platform for my shower and tub to sit on. This platform will be attached to 3 walls. A typically bathrooms layout. What screw type would you recommend? Many thanks!!
@johnstanley6681
Жыл бұрын
Hi Jeff, I want to directly cover a feature red brick wall that’s over 90 years old with dry wall (Gyprock) without using glue or wood framing. I want to minimise the damage to the wall as the drywall is only temporary. What screws can you recommend? I’m in Australia. Cheers
@Stevenyoung100
3 жыл бұрын
I dont think I've ever been more entertained looking at screws. 😀
@clairetheloon
3 жыл бұрын
Thank you, Jeff! I let out an audible gasp that scared my cat when I saw the title of this video. My very dear and wonderful late husband left me with a treasure trove of tools (many older hand tools, some very vintage from his machinist grandfather) and about 9,999,999 fasteners. I could stock a small hardware store, truly. Now, I'm not a total dummy when it comes to woodworking and basic construction, but OMG. More than once in the last three years I've found myself almost in a trance sitting in the garage gazing at nails, screws, nuts and bolts of every size and shape imaginable, trying to sort them (HA!) while wondering what the heck are they for, and why did my darling husband buy them. I laughed when you mentioned purchasing in bulk. Yep. That was him. If he needed two screws, he'd buy two dozen. Then at some later date if he needed the same type he could never find one, so he'd just go buy another 20 or 30. Sheesh! So, once again, many thanks for the very well done lesson on fasteners from a very attentive pupil. I've become a regular viewer, and love all of your videos.
@Sheila-cm4jy
2 жыл бұрын
Claire, like you, I had a ton of fasteners that landed on the basement workbench over the last 25 years! And I sorted them! What mystified me was the head shape and what would be the most typical application for flat, round, and oval in a "wood" screw and then, pan, truss, fillister and hex in the machine screw category! Geez! And why don't the threads go all the way to the top on some, leaving a smooth shank? Those seem to be mostly on exterior wood screws. Coated, galvanized, stainless steel.....? It made me feel like I needed to take a course on "Fasteners 101"
@olenaerhardt7725
3 жыл бұрын
A have a strange problem, seems like no one but me has it. I'm using desk screws Grip Rite Fasteners 1-5/8" (Primeguard Exterior Screws) on a fence. They were recommended to me in HD. When I decided to redo a bit one fraction of the fence and removed some pickets like 6 of 18 screws got broken. I've read that bcs they are hardened they don't withstand much sheer stress. The original screws were just metal screws for inside works. They were all rusted, but none of them got broken on removal. And I screw them in into just pressurized wood (I think the treated one is even more dense). I think maybe better to use for star screwdriver instead of regular Phillips. I would appreciate any opinion on this matter, bcs I don't understand at all how such fragile screws can be used for decks (even for a fence they are not quite reliable). Thank you for you film.
@jumill
4 жыл бұрын
great video!!! Lots of good and important DIY must knows...
@gopherbar
4 жыл бұрын
How do you know which screw head to use such as Philips, flat head etc so you don’t strip the head. Great video
@johnfithian-franks8276
4 жыл бұрын
Hi Jeff, I use a lot of pallet wood because I like to recycle wood that will otherwise end up in the landfill. Here in the UK they use those 2 ¼ staples to fasten the slats to the runners and it is a nightmare to get them out, they are so thin that they only just resister on the metal detector and then you have to dig each pin out because they snap as soon as you get hold of them and then there are two bits to get out. If you are not very careful and miss one, it makes a mess of your planer knives.
@HomeRenoVisionDIY
4 жыл бұрын
those hardwood pallets can be pretty handy!
@andrewgibb8846
8 ай бұрын
Excellent! Thank you, you’ve saved me much frustration and time! Valuable information sir 🍻
@PBS-nm1uu
3 жыл бұрын
great presentation. please keep them coming, thanks.
@shericreates
3 жыл бұрын
Now that gave me so much information I need at this moment building my little shed, reattaching my aluminum deck cover and all my dry wall I have to install! I was kind of lost when you were talking about the hole in the board.. I’m thinking that’s a side view? Thanks as always for another great video!
@HomeRenoVisionDIY
3 жыл бұрын
Cheers Sheri!
@ecospider5
4 жыл бұрын
Fantastic video thanks. All I would add is the GRK rss screws. structurally rated and weather proof guaranteed along with treated wood contact. It is my go to screw for indoor and outdoor rough projects. And the grk rss that replace lag bolts are just cool.
@HomeRenoVisionDIY
4 жыл бұрын
Amazing how they are almost $1 per screw where I like!
@ecospider5
4 жыл бұрын
I always laugh when looking at the salt water contact stainless they have. They can be multiple dollars per screw. As with anything you have to find the bulk pricing. Still expensive but more reasonable in boxes over 200. GRK 772691111371 RSS10318-5 RSS ProPak 10 by 3-1/8-Inch Structural Screws, 236 Screws per Pail www.amazon.com/dp/B001PCXHK2/ref=cm_sw_r_cp_api_i_lRD3EbEPHA5SV
@ecospider5
4 жыл бұрын
I started using them after verifying their code compliance. www.grkfasteners.com/support/code-approvals
@ecospider5
4 жыл бұрын
You need a 1/4 inch rss to replace an 8d and 10d nail. Even in bulk they are $0.30 a piece. 1/4 in. x 3-1/8 in. Star Drive Washer Head RSS Structural Screw (500-Pack) www.homedepot.com/p/301878342 So don’t build a house out of them. :)
@HayabusaOrlando
4 жыл бұрын
That was A LOT of useful information. Thank you
@Davegbuf
2 жыл бұрын
Thank you for such an excellent video. This is a great reference to review for future use on different projects or to refresh our memories if we don't work on projects as often as others do.
@totanlaha
4 жыл бұрын
Awesome video... lots of useful information. Could you please let me know how to attach trim to a concrete wall (basement), is there any glue that can do the job or do I have to nail it?
@Newspirit1111
4 жыл бұрын
Good work, I love that you do .sorry for my inglish , Im chilean , I follow you. Thanks for your videos.
@HomeRenoVisionDIY
4 жыл бұрын
Thank you very much! Cheers to Chile
@stevenb6098
4 жыл бұрын
I would love to see a video like this, but about different types of anchors and when to use one over the other. What's best for bricks, concrete, blocks, etc...
@HomeRenoVisionDIY
4 жыл бұрын
already in the Q. Cheers Steven
@michaelsteffeck6114
4 жыл бұрын
The marketing materials for the structural screws say they are a direct replacement for lag screws. Is this always true? Can a structural screw be used to mount things to an overhead joist? The photos generally show them used in a horizontal, decking context. Thanks!
@RPHannish
4 жыл бұрын
This was such a great informational video, thanks Jeff!
@HomeRenoVisionDIY
4 жыл бұрын
Glad it was helpful! Cheers!
@Th3Su8
4 жыл бұрын
I think that you may have gotten some terminology incorrect or you guys up north just call things differently. At around 4:40 you start talking about the basic wood screw and say it has a pan head then the next screw you say has a flat head for particle board cabinet work. I think those heads are reversed from what I have learned over the years. The cone shaped head that is flush with the surface once fully fastened is the flat head. The screw with a rounded top head with a flat surface towards the threads is the pan head/round head/button head screw (all of these are actually different heads but of the same general style with slight variations). Other than that little note you are spot on with you fasteners. I never thought that this would be such a highly requested video. I guess being around construction and general mechanic work for many years has taught me some things I considered general knowledge. You did a fantastic job explaining the various types and uses of a wide range of fasteners and I think your viewers will be better off for it.
@Ex-expat
2 жыл бұрын
Fantastic summary! Well done
@rileyyule7819
2 жыл бұрын
Nice video with ways to develop a commercial startup.
@jorgenorman8715
6 ай бұрын
Iam guessing would I use the fine thread drywall screw for metal studs that have wood blocking. All three materials really drywall, metal stud with wood blocking. Also would I use that same screw if I wanted to attach the wood blocking to the metal stud? Iam trying to mount a tankless water heater, thanks
@michaellines2063
2 жыл бұрын
There's also double headed nails that they like for concrete forms. They can be pulled out easily.
@MaxQuagliotto
4 жыл бұрын
I like the tip about covering up existing popcorn ceiling (2:20) by using the drywall laminating screws to hold up the drywall to the ceiling. I was dreading the idea of scraping off all the stucco so this is a great option! BTW Great video on the differences between fasteners; this video will go in my toolbox for sure.
@marcz9482
3 жыл бұрын
Come on Jeff, my inspiration for all my diy projects. Flat head is for counter sinking, pan head is round on top.
@leoncope6649
Жыл бұрын
Just asking a what would you recommend going threw would in to metal like making a flat bed truck bed or some small project with wood & metal , asking a silly ?? But just asking I do not know anything about this kinda stuff
@apexscape
4 жыл бұрын
great video. i've always spec'd lag bolts but switched over to structural screws.
@HomeRenoVisionDIY
4 жыл бұрын
A nice improvement. less likely that the wood will split. Cheers!
@donstevens7847
3 жыл бұрын
Hey Jeff! Great video!
@Weirdkid71
3 жыл бұрын
OMG. LOVE IT. Thanks so much for the great vids!
@isabelstaples198
3 жыл бұрын
Wow --- super great information for this novice DIY'er!
@coldsteel998
4 жыл бұрын
Your videos are excellent thank you.
@DawidhabdArup_N7
3 жыл бұрын
*_Brilliant_* as usual. I can't thank you enough for the help & tips you give in every contents. *_Excellent_* ... Cheers!!!
@justinstrickland4199
2 жыл бұрын
its fasten ating
@DawidhabdArup_N7
2 жыл бұрын
@@justinstrickland4199 ¿¿What do you mean by Fasten ating??
@tobiaspester3729
4 жыл бұрын
This is really useful.
@Sir_Lionheart
4 жыл бұрын
Good information, but I wish you’d covered the different head preferences, such as Phillips heads vs Star Socket heads, Square Socket heads, Screw driver heads etc. Why are there so many head styles?
@WhiTiger
4 жыл бұрын
Such a useful video!! This explains a lot. I always thought a nail was a nail until I started watching your videos. Thank you for sharing your information. Your videos are like DIY courses.👨🏼🔧 I need a notebook and pencil to take notes. And the membership program is like getting your questions answered and advice directly from the professor👨🏼🎓. . . And it all costs much less than tuition for school❣️ Thank you for all your hard work. It is appreciated!
Пікірлер: 416