i like this kind of videos that is informative and short compared to others who keeps saying nonsense just to make their content longer
@dn7783
2 ай бұрын
The last guy I was talking about hot gluing at the end, and kept on saying this stuff without mentioning brands and now I feel like I wasted my time
@srsykes
2 жыл бұрын
Great! Short and to the point. You gave us the what AND the why, thanks
@mnavarrotube
2 жыл бұрын
That was fast a clear. Going straight to the point. Thanks
@calvinhoyinleung9555
4 жыл бұрын
Hit to the points !!! Nice and short also informative!!! CHEERS
@CLUTCHITSYSTEMS
Күн бұрын
Yeah, I tried the no-lead one. In making motorcycle clutch cable ends, I just could not get the solder to melt around the cable end very well and, well, the result consistently looked raggedy. Gonna try the tin-lead-silver you recommend.
@bryanbecker
3 ай бұрын
You are awesome. Very likable. Thank you for this video.
@demeaningplebny1363
11 ай бұрын
Simple, concise, informative.
@josemilian4167
3 жыл бұрын
Great video. A lot of good information.
@alesizzz1
Ай бұрын
Great Advice. Thanks !
@balenaluba4215
3 жыл бұрын
it's about three years after you posted this, in a different timezone, how did you know i'm watching in the afternoon.
@jolox.
2 жыл бұрын
I'm just getting into soldering, so this was very helpful. Thanks for posting. I'm going to thumbs up and subscribe to support your channel!
@yvanthepcgamer7993
2 жыл бұрын
same here. busy looking what material and such I need.
@shawn576
3 жыл бұрын
Lead free solder works perfectly fine, but as you stated, the soldering iron tips burn out incredibly fast. I don't even think it's temperature related because I use the same max temperature for every kind of solder. There's something in the solder itself that destroys the tip.
@paipaiakapapi3137
3 жыл бұрын
Im a beginner, which solder would you recommend ? Im mainly practicing repairs on electronics and THT soldering. Should i buy the one this guy recommends? (Silver one) Don’t mind my name lol.
@shawn576
3 жыл бұрын
@@paipaiakapapi3137 63/37 or 60/40 lead solder are the easiest to work with. Extremely low melting point. Even the shittiest dollar store soldering iron can melt it.
@paipaiakapapi3137
3 жыл бұрын
@@shawn576 im also thinking about buying solder wix and a flux pen... any advice?
@nedcramdon1306
3 жыл бұрын
@@paipaiakapapi3137 Some day you might have to change your name to ClapYap. ;-)
@cutiebunnyamber3447
Жыл бұрын
@@paipaiakapapi3137i suppose you're masters at electronics now, after 2 years. I'm na beginner, can you share to me how should i start with? thank you
@duaneborgaes9223
5 ай бұрын
🤔I'm a beginner... (🤷and have both them wires) 💯Thanx for telling the difference, & also about the unleaded/Rohs type😎👌🏁✨
@KingKatura
4 жыл бұрын
I'm with you the old lead solder is always the best. Even when i started its the only that allows for professional work really. Everything else just balls up and rolls and you have get drop techniques to even use it. But the led as long as your iron is hot enough allows for easy application and rarely do you have to redo a joint.
@KingKatura
4 жыл бұрын
John Nelson you would think so but you especialy want electrical solder. The no lead solder I got worked partially and then didn’t work on some things recently at least. Probably because silver leaches and makes joints brittle. Their is other solder like for plumbing and such.for ease you would probaly want a resin core solder, but ones that have acid flux that’s for plumbing do not use it for electrical.if you use a lead one 60/40 or 60/37 or non lead prolly 96.5/3/0.5. I’d say only use solder wire so u don’t accidentally buy plumbing solder.ill leave a couple links for u to see as a reply to this.
@KingKatura
4 жыл бұрын
@John Nelson Lead- www.amazon.com/gp/product/B0002KRAB0/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B0002KRAB0&linkCode=as2&tag=buildelectcir-20 Non led- www.amazon.com/gp/product/B000VPRYX0/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000VPRYX0&linkCode=as2&tag=buildelectcir-20 study these two and as long as your solder is similar to one of them you'll be alright. 60/40 led i know works good with and without flux. The other non led based I've have only had issues with, and is hard to work with unless you have a high temp rod. and 4 out of the last 4 things i fixed with it didn't work or didn't work right. Of course they were headset circuit boards so their could be issues with other parts but it didn't appear that way. It is interesting to note about my being statement about it being a money thing as solder with silver tends to leech and makes the joints brittle over time, so i seem to be on the right track their so i'll have to history research. Obviously though the cheaper the solder is most likely the worst the metals are so keep that in mind as impurity's can cause issues.
@andrewgraham2546
2 ай бұрын
Ok I know this is an old video but I have some gripes. Tin/lead solder can be eutectic or non eutectic. 63/37 vs 60/40 for instance. The lead free stuff is harder to work with, slower to wet that is, but is usually SnCu or SnCuAg. So nothing "as bad as lead" in it. Using lead free solder won't ruin your tips as long as you separate your tips between lead and non lead because it's the mixing of the two that messes things up. Personally I like to work with 63/37 rosin core but these days I have to order it because finding lead alloy solders in consumer stores has gotten harder and harder.
@justaregularguy3827
2 жыл бұрын
Lead tin: most generic applications and medium to high skill Silver mixture solder: great for beginners and harder joints for heavier duty connections or for intense physical strain Got it
@MagicPlants
3 жыл бұрын
What's as equally bad as lead in the lead-free?? You say it does but it's so important that you don't name it?? BS!
@keving1774
3 жыл бұрын
Can you solder electrical cables with it?
@maybeakshh
3 жыл бұрын
The best is 60/40 lead and tin solder, 2 core seems good. Who need 5 core rosin.
@joeteejoetee
2 жыл бұрын
1 core has served for 100 years - 2 cores for really fat solder diameters I guess. 5 core was a marketing gimmick, and is not needed.
@FixItWithMe
Жыл бұрын
So u can use either two for both plumbing and electrical wires??
@garymurawski1476
5 ай бұрын
Too bad noone answered. Not sure myself. Probably not going to be using lead in a water system and temperatures of copper pipe differ from copper wire so heat could be an issue.
@eugenegress5896
Жыл бұрын
Would silver bearing solder be good to solder Fishing Stainless Steel wire to wire, or a split ring, to keep from streching open. ???
@howardcortez4635
5 жыл бұрын
I wish you will show the label on the product you are showing
@bornfree2237
4 жыл бұрын
All the same. The only thing you need to look up next is the ratios of elements unless you're shipping things overseas.
@Literature-ft8ru
2 сағат бұрын
I go with led free. I dont care what you say about led, I prefer not to die too prematurely
@alesizzz1
3 жыл бұрын
Good viewpoint. Thx
@saimaali843
3 жыл бұрын
This was very helpful. Thank you.
@lambda4931
Жыл бұрын
Thank you
@electrolatif
Жыл бұрын
Oatey 95/5 solder, is it good for soldering aircon piping?
@flightpowersims3299
4 жыл бұрын
Thank you for your info, helped me a lot.
@peterthepooh
2 жыл бұрын
What type of solder would I use to repair my kitchen sink wire rack? I believe it is a stainless steel rack.
@ksajak
2 жыл бұрын
Plumbing solder
@averagerider92
3 жыл бұрын
But for what application? What if I wanted to solder copper pipes for a potable setup
@farabielec
4 жыл бұрын
Thank u. Does type of solder could damage soldering iron tip?
@AutodidactEngineer
4 жыл бұрын
Basically the more heat the more damage so just go with 60/40 solder buddy...you'll thank me in the long run also make sure it is Rosin cored!
@SevenDeMagnus
3 жыл бұрын
Cool
@mtbridingog9083
3 жыл бұрын
Can you silver solder on aluminum
@patrickblessedtembo3664
5 жыл бұрын
thanks
@scratchgolfermd
3 жыл бұрын
What about selinium, antimony and copper?
@jessymode
3 жыл бұрын
galvanized solder is used for?
@ExploringCabinsandMines
2 жыл бұрын
What about Rosin core vs Acid core ?
@atetraxx
Жыл бұрын
no acid core for electronics.
@yup-2067
3 жыл бұрын
Thnk u !!!!!!!!!!
@user-df5ed7jr8j
Ай бұрын
Name on your solder.
@davidferguson8478
5 жыл бұрын
I'm sorry to say but the way things are going that's what we will have to get used to working with
@warrenbennett1863
3 жыл бұрын
Is the “L” in solder silent?
@flagman515
3 жыл бұрын
It depends upon where you are from. Google says "soder". I say "soder", "ya'll", and "ain't".
@joeteejoetee
2 жыл бұрын
I pronounce it "Sod-Er" with a break. Dialect location: Georgia USA, 50 years Soldering Electronics.
@warrenbennett1863
2 жыл бұрын
@@joeteejoetee Er, you spelt it correctly? Ah, sod it.
@justinquinones425
3 жыл бұрын
Español
@tassie7325
4 жыл бұрын
Why do Americans not pronounce the "L" in solder?
@BloodHound0827
4 жыл бұрын
Because it's a different country? With different pronunciation? Why does it matter?
@mathewhunt81
4 жыл бұрын
Because we are badass and don't have to :P
@tunaonwhitenocrusts
4 жыл бұрын
Saves time. We work hard and play hard. No time for unnecessary "L" pronunciation.
@tassie7325
4 жыл бұрын
@@tunaonwhitenocrusts 🤣 Think how much time you could save if you drop the other five letters
@Bama_RTMF
4 жыл бұрын
Europeans are good at taking L’s, that’s why the pronounce the L in solder lol
@garystobbs3612
3 жыл бұрын
Solder NOT SODDER FFS LEARN TO GET THE BASICS CORRECT 😡
@MagicPlants
3 жыл бұрын
Are you a troll?? That is pronouncing it correctly in American English. We do pronounce the L, it's why it's not "soder" like "soder pop" would be pronounced. We say "SAHTER" which is what the L does to the sound of the O
Пікірлер: 87