Hey guys, enjoy the video! All products and tools used are in the description and available in our webshop www.cardetail.be! If you have any questions, let me know!
@joemyers3141
4 жыл бұрын
How long did it take?
@ghostcustoms9224
4 жыл бұрын
Like a pro, first video I watched had to Like and subscribe. Really like your work👍👍👌👌👌👍👍👍
@TwinzGarage
4 жыл бұрын
👍👍👍👍👍
@VermijlCarDetail
4 жыл бұрын
@@ghostcustoms9224 Really appreciate it! Thanks for subscribing 😉
@chuckehrlich
4 жыл бұрын
Fantastic job, but need to replace those rusty lug bolts!
@VermijlCarDetail
4 жыл бұрын
Thank you! True, the new owner of the car had already ordered new ones!
@RishabhSingh-we8fe
4 жыл бұрын
Bro they are expensive 😂 only the owner can buy
@YaDunno54
3 жыл бұрын
Put them in acid
@DavidC1
4 жыл бұрын
i really like this video, and enjoy the natural sounds instead of music...more like this please
@VermijlCarDetail
4 жыл бұрын
More videos coming soon! Thanks for the support man!
@mohammedreyan5651
3 жыл бұрын
So satisfying
@worlow1841
4 жыл бұрын
Very underrated channel
@VermijlCarDetail
4 жыл бұрын
Thanks man! It’s nice to see comments like that! It means a lot! 🙏
@SW-ni8ls
4 жыл бұрын
I agree
@in4chandru
4 жыл бұрын
Quality video and Quality work. Hats off!
@VermijlCarDetail
4 жыл бұрын
Thank you so much Chandra. Appreciate the support as always!
@ukrgamers
4 жыл бұрын
Thank you for another good video.Quality, passion, attention to details of your job.Love it)
@VermijlCarDetail
4 жыл бұрын
Thank you so much for the support! I appreciate you!
@FinneyWambua
4 жыл бұрын
You actually went ahead and removed the wheel just to give it that perfect detailing! Super cool. I have never seen that being done before.
@VermijlCarDetail
4 жыл бұрын
That's what detailing is about! Making it look real good! Thank you for watching the video.
@jaaphoogendijk671
4 жыл бұрын
Wow, sweet! I just finished working in the garage I work in today, and now get to see a proper deep clean. That's a good start to the weekend😃
@VermijlCarDetail
4 жыл бұрын
Good timing by me! 😄 Hope you enjoy the video! Also, enjoy your weekend!
@jaaphoogendijk671
4 жыл бұрын
It sure is😉 Also, what nozzle do you use for the IK? The one for the thickest foam? I bought it a month ago but cannot seem to get foam as thick as you do
@VermijlCarDetail
4 жыл бұрын
I use the grey nozzle. Getting the right thickness and spray pattern really comes down to finding the right dilution ratio in my opinion. Also I usually only fill up the container for about 60%, that way you can get enough air (and enough pressure) into the foamer.
@jaaphoogendijk671
4 жыл бұрын
@@VermijlCarDetail Thanks for the advice, then I guess I will try out more in the future to see what works best, cheers!
@flowinthrou
Жыл бұрын
5:00 this is the cleanest wheel arch and wheel I`ve seen to be cleaned.
@nic22m
Жыл бұрын
Hey man just want to show some love for your content. Attention to detail in style with nice video conception. I’m always thinking about the struggle that you need to go through to put multiple frame angle like that and everything… Hats off to you ! Side note ; I really liked when you put the product and dilution ratio like in this video & wish to see it back a little more ! Cheers man 🇨🇦 🤙🏼
@wellnessforall6663
4 жыл бұрын
This is called professionalism. Awesome work. Thank you for uploading this video.
@VermijlCarDetail
4 жыл бұрын
Thank you for watching! I appreciate it!
@buildindian8169
4 жыл бұрын
I admire what you are doing, after all I just use dishwashing liquid soap, WD40 and water to clean everything..
@istbreezy
4 жыл бұрын
Same here 😅
@Seikers
4 жыл бұрын
Cleaning wheel wells is probably the most satisfying part of any detail. The only downside is it takes a lot of work and time
@VermijlCarDetail
4 жыл бұрын
It sure takes a lot of work, but the effort is definitely worth it. Can’t have dirty wheels under a clean car! 😁
@yabd792
2 жыл бұрын
Excellent job and very informative, I think you took car detailing to the next level very up. Thank you.
@adrcamacho1
3 жыл бұрын
Amazing videos. Very meticulous and focused. He’s like the John Wick of car detailing!!!!
@smash320
4 жыл бұрын
Du détailing en ASMR , le top pour moi! Merci et je m'abonne...
@oktamer
3 жыл бұрын
oui
@kazkinC
4 жыл бұрын
Never get bored.. Fantastic!! ❤️
@VermijlCarDetail
4 жыл бұрын
I’m glay you enjoyed the video!
@Faisal_Shahzad...
Жыл бұрын
Best car washing detail
@jake_6n246
4 жыл бұрын
Exactly how every car should be treated once a month or at least every few months. Brilliant job mate👌
@VermijlCarDetail
4 жыл бұрын
Thanks Jake! Gotta maintain it! 👌
@joevanseeters2873
3 жыл бұрын
Wow. One of the best wheels off details I have ever seen. Got some good ideas though. That was a great tip with using the steam to emulsify all the dirt after using the cleaner. Probably the cleanest those wheels have ever been. Excellent.
@talaltalal8680
2 жыл бұрын
Hello, have a good day and it is Really very beautiful. This sincere Work To clean and maintain a car, And sincerity of effort and work, May God grant you success
@AutomotiveAnatomy
4 жыл бұрын
Absolute the cleaning detailing. Great eye!
@VermijlCarDetail
4 жыл бұрын
Thank you! 🙏
@JamieMitchellDesign
2 жыл бұрын
That is such a nice car.
@erik_caves
4 жыл бұрын
This is therapeutic, good stuff!
@MrAllnvme
4 жыл бұрын
It’s so damn therapeutic, I take hours sometimes on my own car but I find it equally satisfying watching these videos. Makes me want to keep investing in more products lol
@VermijlCarDetail
4 жыл бұрын
Thanks Erik! 💪
@VermijlCarDetail
4 жыл бұрын
Hey Ben, I know that feeling, it’s addicting, isn’t it? Haha
@Jean-LouisMayans
3 жыл бұрын
Best profile on the web! Congrats
@HIAGOGR
4 жыл бұрын
I love all, brother !! thanks for sharing this wonderful work
@VermijlCarDetail
4 жыл бұрын
Thanks for you support Thiago!
@ahceneabbas3767
4 жыл бұрын
Magnifique travail.. Et j'adore le mélange en pulvérisateur mousse les deux formules.. Ça marche bien ensemble.. J'admire 👍
@VermijlCarDetail
4 жыл бұрын
Thank you so much! I’ve been using this combination for quite some time. The shampoo makes it cling better to the surface.
@pierrekitts7089
2 жыл бұрын
Wonderful job, if I was the owner as I did on my 2010 997.2 after doing the wheel wells would be to purchase titanium wheel bolts, a shame really putting those rusty bolts back on after such a great job detailing. But to each their own.
@ShineFreak
4 жыл бұрын
So cool and good quality video!!
@VermijlCarDetail
4 жыл бұрын
I’m glad you enjoyed the video! Thanks for watching!
Outstanding work, really inspiring. I like how in depth you show each cleaning process as you go along instead of speeding up the footage, i mean each to their own everyone has different approaches etc to be fair. Your channel deserves a lot more subscribers
@ThePakovia
3 жыл бұрын
9 years old tyres, nice 😀
@arjenverburg9425
4 жыл бұрын
Another satisfying video, great stuff! I have put my Perl to the test on the exact same job, the inner fender, it creates a nice finish gloss with great beading results. Thanks again for supplying! Need to get me one of those iK Foam sprayers too.
@VermijlCarDetail
4 жыл бұрын
Perl is very versatile in use! Glad you like it! Thanks for the support man! 🙌
@kotomakosako
4 жыл бұрын
This video deserves way more views. Chanell with get there eventually. Top notch.
@VermijlCarDetail
4 жыл бұрын
Thank you so much for the support! That means a lot to me! I’ve been doing my best making as much videos as possible lately. I already have a few more recorded, will be uploading them soon!
@Petemitchel34
4 жыл бұрын
Encore un magnifique travail c’est une forme d art. 👍🇫🇷
@VermijlCarDetail
4 жыл бұрын
Merci beaucoup! 👍 Greetings from Belgium!
@E85_STI
2 жыл бұрын
Just a tip I think the shampoo ratio was 20:1 meaning 20 parts water 1 part solution unless you did an actual 1:20 ratio I just haven’t seen that. Just for those that are new to dilution
@adamchill8780
4 жыл бұрын
Keep up your videos man, this stuff is amazing to watch, this might be the best detailing channel I’ve found yet
@VermijlCarDetail
4 жыл бұрын
Thank you so much Adam, I'm glad you enjoy this style of video! Really appreciate the support!
@stephaneknaepen9333
3 жыл бұрын
Nice video, but do you have a tip to avoid rust on the disc brakes without removing the wheel ? Because when you start driving again.. all the ‘ dust’s rust ‘ coming all over inside the wheels again.. Thanks
@shaunmcsorley3528
4 жыл бұрын
Absolutely brilliant
@VermijlCarDetail
4 жыл бұрын
Thanks Shaun! I appreciate it!
@96muttrix96
4 жыл бұрын
I've been watching through all of your videos today and you've got yourself a new subscriber! Already one of my favorite detailers on KZitem! Keep it up! Btw, which color on a car is your favorite/least favorite to work on? :)
@VermijlCarDetail
4 жыл бұрын
Thank you so much! I really appreciate it! I’d say solid (uni) black is in a way the hardest color to work on, but probably the most rewarding as it provides the best reflections and gloss once it’s corrected. A color I really like is blue such as the Golf R from my recent video.
@96muttrix96
4 жыл бұрын
@@VermijlCarDetail Ok! Yeah I can see why! :) Yeah that Golf R was beautiful!
@Mrjackietreehorn
4 жыл бұрын
Dammit silver looks good on that car
@VermijlCarDetail
4 жыл бұрын
Sure does look great on this car!
@carrozerodetalhamento333
4 жыл бұрын
The iron remover is the key of a perfect detailing
@VermijlCarDetail
4 жыл бұрын
IronX does an amazing job!
@dusthue
3 жыл бұрын
I didn’t search yet so I will just ask- what are the lift points on that Porsche? The steam clean is awesome.👍🏻. Damn he has 3 more wheels to do.
@kayrapaker
3 жыл бұрын
A profession done down to the last detail. But how much money do you make each transaction? Can you also write your prices? You do your job well. I have been watching you from Turkey. I support. Good luck.🇹🇷
@rjongkind
4 жыл бұрын
That's how it should be done! Great job mate 👌
@VermijlCarDetail
4 жыл бұрын
Thanks buddy! Appreciate the support as always ✌️
@trapcracker
4 жыл бұрын
Looks fantastic! Great video.
@VermijlCarDetail
4 жыл бұрын
Thank you for watching and thank you for the support! 👍
@derek723
3 жыл бұрын
Nicely done and great job on the video production. Curious why you use iron remover on the rotors? They just rust right back up as soon as any moisture gets on them. Sort of a losing battle
@ปิ่นหทัยสีวันนู
3 жыл бұрын
So. Good.and. cool
@VermijlCarDetail
3 жыл бұрын
Thank you very much!
@evertonramos2253
4 жыл бұрын
Ótimo trabalho 😄🇧🇷🇧🇷🇧🇷🇧🇷
@VermijlCarDetail
4 жыл бұрын
Thank you so much! Greetings from Belgium!
@DietterThrift
4 жыл бұрын
Awesome work, man. Great video
@VermijlCarDetail
4 жыл бұрын
Thank you Ian! I appreciate the support!
@romano825
3 жыл бұрын
très beau travail !!!
@Kickbasser
Жыл бұрын
Great job! Can I use Irox and TarX on matt/satin wheels and or clay?
@jonathanmaravilla6800
4 жыл бұрын
wish I could have seen a before and after of the back of the rim but awesome video definitely subbing
@VermijlCarDetail
4 жыл бұрын
Thanks Jonathan! I appreciate the subscription!
@307skylake7
4 жыл бұрын
Beautiful GT3! My dads Cayenne 957 has those red calipers and they’re beautiful. That GT3 must sound good on startup too 😍
@VermijlCarDetail
4 жыл бұрын
I included a cold start at the end of the video! Sure is a beautiful car!
@307skylake7
4 жыл бұрын
Vermijl Car Detail I just saw it and yes that sounds great!
@jonathanjorge2534
4 жыл бұрын
This is verry good work.keep it up
@VermijlCarDetail
4 жыл бұрын
Thanks for the support!
@MikesAutoDetailing
4 жыл бұрын
Great job on this video
@VermijlCarDetail
4 жыл бұрын
Thanks for the support Mike!
@vediaosman9392
4 жыл бұрын
Awesome job mate
@VermijlCarDetail
4 жыл бұрын
Thanks buddy! 👍
@Mattvxr333
3 жыл бұрын
Im sure iron remover says avoid contact with discs?
@braincraft4813
2 жыл бұрын
Great video bro. How would we Charge for this ? Per wheel ?? How much per wheel ? Anyone else with insight would go a long way for a 1st time detail business. much AloHa !!
@paulmcgaw6976
4 жыл бұрын
Stunning!!!
@VermijlCarDetail
4 жыл бұрын
Thank you Paul!
@lucaszanin38
4 жыл бұрын
Relaxing video !
@VermijlCarDetail
4 жыл бұрын
Thanks Lucas! Glad you enjoyed this style of video.
@Paukas84
3 жыл бұрын
ironx directly on brake isnt too hard ? love the content man!
@WhenThingsGoSouthNJ
4 жыл бұрын
Great content and video editing!
@VermijlCarDetail
4 жыл бұрын
Thanks for the support! Glad you enjoyed the video!
@robamartelli
4 жыл бұрын
My God, congrets, fron São Paulo, Brazil
@VermijlCarDetail
4 жыл бұрын
Thanks! Greetings from Belgium!
@zsoltlehoczki3894
4 жыл бұрын
Nice and perfect work! Greeting from Hungary colleague!
@VermijlCarDetail
4 жыл бұрын
Thanks man! Greetings from Belgium!
@marvman88
4 жыл бұрын
You have lots of faith on that one floor jack and could have invest on some jack stands for safety.
@VermijlCarDetail
4 жыл бұрын
Don’t worry, if you look closely you can see I also had the thing on a jack stand.
@mysecondakun9735
4 жыл бұрын
Satisfying
@MacTech007
2 жыл бұрын
Excellent detail. What brand impact socket are you using to remove the lug nuts
@jasonb8081
2 жыл бұрын
Do you ever do ONR wash on any of your cars?
@Eldiinpro
4 жыл бұрын
Like everytime, good job guy’s 🥰
@abelezadaforca925
3 жыл бұрын
Is it hot steam that you apply to the disk? Why perform this procedure ? Thanks bro
@carobsessed35
2 жыл бұрын
Is it completely safe to clean/ scrub on and in all the hardware on the back inside of the caliper? Also is it ok too use spray 9 for the plastics and basically everything in the wheel well?
@alvin9185
4 жыл бұрын
Nice 😎
@VermijlCarDetail
4 жыл бұрын
Thanks Alvin! 👍
@maasterh
2 жыл бұрын
Super boulot . Question. Tu utilise quelle nettoyeur vapeur? Merci d avance
@ymyone
3 жыл бұрын
Great job, i would do the tyre first then the rim as you let dirt run over it and its crevasses when you rinsed off. Otherwise well done.
@にーと-k2g
4 жыл бұрын
Thanks for uploading the video.😳
@VermijlCarDetail
4 жыл бұрын
Thanks for watching!
@kevinmerida5664
4 жыл бұрын
That was awesome 👌
@VermijlCarDetail
4 жыл бұрын
Thanks Kevin! 🙌
@SuperUzzer
4 жыл бұрын
Awesome video, especially the product ratio, as silent comments. Using CarPro is the magic of dilution and mixes (hello Elixir). Your channel is the rear case when you can watch the same cars detailing again and again while every time is noticing new details. Few questions so far: 1. What is the algorithm to SUM MultiX(1:20) with Reset(1:500) in a foamer? E.g., 1:1:520? 2. Is it worth to spend DLUX on wheel arch plastic? Is it okey to think DLUX as durable Perl alternative? I do worry that It will be quite complex to maintain hard to reach parts Perl'ed with the wheel on.
@VermijlCarDetail
4 жыл бұрын
Thank you so much! I basically use MultiX 1:20 and add a little bit of Reset just so it foams better and sticks to the surface for longer. Too much Reset will make the foamer clog up. You could use DLUX instead of Perl, it might last longer but I don't think you will get close to 1 year of protection because these areas tend to get really dirty.
@titan9358
3 жыл бұрын
Enormes resultados !!!!!!💯🤘
@timothybracken1728
3 жыл бұрын
new subscriber here, why do you use mostly carpro products? are you sponsored by them or just really love their products?
@VermijlCarDetail
3 жыл бұрын
Thanks for subscribing! I’m not sponsored but I am a certified CQuartz Finest installer.
@jpkilsdonk4954
3 жыл бұрын
Hi, can I use CarPro lift instead of reset in the sprayer?? The reset makes it foam so well right.... Thanks a lot. Keep up the good work!
@VermijlCarDetail
3 жыл бұрын
Of course! Carpro Lift wasn’t out back then, but it would be perfect for this job. And yes indeed, I added Reset to make it foam better.
@ge_raud801
3 жыл бұрын
Quite surprised you apply iron remover directly on calipers and brake pads. Really good job though.
@bcshay
4 жыл бұрын
i’m just curious why the wheel lugs aren’t being torqued back to spec with a torque wrench???
@VermijlCarDetail
4 жыл бұрын
Seems like you missed that part!
@bcshay
4 жыл бұрын
Vermijl Car Detail ooo it just wasn’t in the video :-) so thought i’d ask. i presumed otherwise tho
@adampug206gti
3 жыл бұрын
Fantastic job I've just subscribed to your channel.. what steam cleaner do you use and do you think that it has a better advantage over water?? Thanks 👍🏻😎
@xZiMinDaveyy
4 жыл бұрын
So they are clean? But do you also put a protection on?
@rrpinsanfrancisco8598
3 жыл бұрын
Thanks for the tips. I found a great wool wheel brush on Amazon that works great on my Maserati GranTurmiso. Any recommendations on a wheel degreaser?
@marcjarvis3975
3 жыл бұрын
Looked great! Curious why you’ve used iron x straight onto dirty wheels and brakes? Is it not more efficient to clean them first, then use the iron remover?
@VermijlCarDetail
3 жыл бұрын
Thank you! I did clean the wheels in the beginning, I think you might have missed that
@marcjarvis3975
3 жыл бұрын
Vermijl Car Detail on the inside of the wheels and the brakes you just used iron x first?
@VermijlCarDetail
3 жыл бұрын
@@marcjarvis3975 my bad, was looking at the wrong video between the overview of my channel comments. The vehicle got a wash beforehand where I also pre-rinsed the wheels. You could indeed wash them first, that way the IronX cleaner will be a bit stronger. But since I knew the brake bust wasn’t that stubborn, I decided to do it this way. It might be more of a personal preference.
@marcjarvis3975
3 жыл бұрын
Vermijl Car Detail nice one, thanks very much.
@jeffreytongco2538
3 жыл бұрын
Hey man what tip are you using on th IK foam - gray or the orange tip?
@andersoncastro6471
3 жыл бұрын
LINDÃO!
@dillanmistry
4 жыл бұрын
Do you move the disk so you can clean the covered bit from the brake callipers?
@VermijlCarDetail
4 жыл бұрын
I make sure it’s clean all the way around 😉
@Doubleoseven502
4 жыл бұрын
Great video. Beautifully shot. Where do you get the nylon sockets for wheel nut removal?
@VermijlCarDetail
4 жыл бұрын
Thank you! I got mine from a local store here, but you should be able to find them online!
@michaelashmead6383
3 жыл бұрын
What is the brand of that yellow shop vac hose? Mine keeps cracking all over:(
@waynedaniel3328
4 жыл бұрын
I love the video but I was looking for a bit more explanation of what you were using and why. I am a first time viewer and want to understand more about detailing overall.
@VermijlCarDetail
4 жыл бұрын
I understand not everything might be clear when you watch the video for the first time. Hopefully you could pick up some tips or techniques though! Thank you for watching.
@ridered7262
4 жыл бұрын
When I saw you remove that little spec of tar I realized I have been doing wrong all this time.
Пікірлер: 317