Dude, I trust your videos more than those other KZitemrs that in recent months are talking about how good the Ronin is and yet all they mainly do are product reviews and no actual hours spent on filmmaking!!! Yah I know, this vid is talking about the crane 2...
@pruett89
6 жыл бұрын
Only the Potato can make some chair b roll look amazing.
@AntJoseph_
6 жыл бұрын
Michael Pruett yep. Same
@dathofilms
6 жыл бұрын
not even PM?
@NewLifeMoves
6 жыл бұрын
That's what I thought too
@groovesmedia989
6 жыл бұрын
i would scroll to the comments to read yours immediately that chair scene.
@thejoshosborne
6 жыл бұрын
Michael Pruett hfctsrefUvsj
@beingarealballa
6 жыл бұрын
Your clickbaits worked on me in the past, but not anymore. I just watch your vlog stuff because I wanna see awesome potato stuff
@SimeonKolev
6 жыл бұрын
I had the same vibrations in some specific positions and rebalancing solved it. Also lowering the motor strenght helps sometimes. About the height - there is a special arm replacement for this gimbal that allows it to lower the camera even further. They made it after 1dxII users made complains. About the follow focus - there is a new model where this problem you were talking about is fixed :). There is only one issue with this gimbal that I can't fix so far and it is a bug maybe. When you lower the handle more than 45 degrees it stops controling the follow left-right and if you rotate the handle and start raising it back to vertical it freaks out. But yes I love the Crane 2, in my opinion it is the best one hand gimbal out there not only as a unit but also as a system because there are a lot of accessories out there for this. I can't wait to see what will come next from them.
@luminari_productions
6 жыл бұрын
Interesting so there are "two" follow focus models now?
@AdamBoroniec
6 жыл бұрын
you're the first video person i've seen using that handle! I purchased it immediately!!! Now i can put my light on it!! PRAISE JEEBUS
@BooooClips
6 жыл бұрын
keep at it man! you'll be big soon!
@TomaszBrodecki
4 жыл бұрын
LEFTY
@Teknochi
6 жыл бұрын
Great video.....you get hair cut?
@5150shirts
6 жыл бұрын
You should send this video to your Canadian buddy Matti so he can learn how to properly operate the Crane 2. Great video like always.
@walijumaat2158
6 жыл бұрын
Seal the thread of the rod by installing a proper size o-ring to the thread of the screw, then screw it in tighly after that you would not have a loose rod issue anymore i think..
@Brad772006
6 жыл бұрын
Nice gear! Love learning about these products.
@Sputz3
6 жыл бұрын
I would take that crane set up apart. That’s looks too beautiful ❤️
@maruwaanmoses
6 жыл бұрын
Are we just going to pretend your hair didn't magically change from one scene to the next? Super transition 😁
@Glen.Danielsen
4 жыл бұрын
Gene, ur vids are of extreme excellence! (Btw, gimbal is vibrating because it’s excited to be working with you.)
@CoveringFish
6 жыл бұрын
Ronin s has no issues with the 1dx once u get it balanced. Other than doing that infinite roll. Also no vibration issue
@588ta
5 жыл бұрын
That dog is amazing.,Love your channel.
@ShotByStyles
5 жыл бұрын
The batteries are why I went with dji my ronin m and s last for days without charging I really think its preference on your choice of stabilizers. I have never had battery issues and I have had my ronin m for over three years maybe you just had a faulty battery.
@ericbulington2421
4 жыл бұрын
sanding that chair was amazing... lucky man.
@p5ylance
3 жыл бұрын
I knew i recognized that pier haha, miss that place
@alexandersamoceta
6 жыл бұрын
Great vid! Loved the dog in the end!
@SparkHelium
6 жыл бұрын
If you dont mind keeping the rod on you can put some loctite on the threads.
@maximwestermann
4 жыл бұрын
Great video mate, just thinking about buying the Crane 2. May I ask what seamless ring you use on the Sigma 18-35? Cheers!
@JohnLRice
6 жыл бұрын
Welcome to WA state! ;-) I've been researching gimbals lately, for either a Canon M5 mirrorless or maybe C100 Mk2 but, I'm leaning towards just a small gimbal for the M5 since I worry that my old weak Mr. Burns arms couldn't handle a gimbaled C100 for more than 5 minutes! ;-) Thanks for the video!
@PeytonHelmProductions
5 жыл бұрын
I've used my Crane 2 a lot and I've never had it vibrate on me once, and I literally use the same camera you are in this video. I think something may be wrong with yours bro. lol
@michaelbruceallen3700
6 жыл бұрын
First video I have seen of yours. You have great energy! Subscribing!
@tommylee8394
5 жыл бұрын
2:06 As all things should be
@shiladitya_biswas
5 жыл бұрын
I see what you did there..
@kfviszokai
5 жыл бұрын
Oh it's a reference I understand
@charlesnetzler2262
5 жыл бұрын
Hey, I love your channel, I recently got into video lighting and your channel has amazing content. I was wondering if you would recommend this set up over getting the Zhiyun crane 3? The vibrating is a bit of a worry since I would be shooting weddings. I am guessing its a weight issue and I shoot with the fuji XT2 and XT3. Just wanted to get your feedback and also thank you for the content.
@weshootfilms
5 жыл бұрын
what type of power cable does it use
@TheGeoDaddy
5 жыл бұрын
As an Old Fart who tried to shoot 16mm on the Santa Monica Pier in High School (Samohi) and regretting that I’ll NEVER be able to get decent “movie” results... 😕 70s! Just bought Z6 Filmmakers Kit and we are off and running!!! Only took 50 years. It’s never too late (until it’s too late)
@niklashoej8085
4 жыл бұрын
Can you try and do the same thing with the DJI Ronin-s? Great video 🎬🎬
@allenyin5458
5 жыл бұрын
Wow, this looks amazing. Have you tried other products by Zhiyun?
@halish301
5 жыл бұрын
Crane 2 is a little bit heavy for me and it is not so smooth when i use the button, it's hard to adjust the balance when it shaking strongly.
@jff757
6 жыл бұрын
Was the hair and wardrobe change another one of your camera tricks?
@herbalgiles9468
6 жыл бұрын
4:41 Peter McKinnon who?
@NightWLKR1
6 жыл бұрын
Herbal Giles haha it totally is that intro!
@ericpaulgoldie
6 жыл бұрын
So true, Peter, Matti, Jesse or Casey need to do a collaboration with Mr Potato!
@Pzvloc
5 жыл бұрын
great job! thank you mate
@regard2paintre
5 жыл бұрын
As always you do pretty cool tutorials. But talking about what most people can afford, I realized that most of the gimbal have tracking systems defiantly not good. They all lose tracking. Even osmo mobil 2. One from taro ai claim to be different. Would you please take a look? Thanks
@vinnieli2614
5 жыл бұрын
I am going to buy a stabilizer.But my friend told me that its battery life has not been that long.Do you have any other better suggestions?
@ingjohnalfonso
5 жыл бұрын
Potato, what lens did you use on the beach shoots? Thanks
@77dris
5 жыл бұрын
That B Roll was great! You shot that with the 80D?!
@dean9504
5 жыл бұрын
Yes
@keithkhoolk
6 жыл бұрын
Awesome video! Way better than the cringy videos on the Zhiyun channel.
@filmscorecom
4 жыл бұрын
cool as always 🙏
@elshoura1
3 жыл бұрын
when i connect moitor with zhiyun crane 2 monitor gives me black screen but when i remove crane cable its work can u help me plz
@therock1232100
5 жыл бұрын
Maybe the vibration shake attribute to the payload.
@247.mp4
6 жыл бұрын
I really love but that ff rod needs to be tightened with the L Screwer included in the package 😀 shot a whole wedding without my focus motor pulling away
@CheeseOnEverything
6 жыл бұрын
would u be able to get your hands on a dji ronin s and do a comparison? Really looking into getting a gimbal for the dslr but dunno which one to get. I like the crane 2 and it's smaller size but it has those nodding issues. The ronin S seems to do everything slightly better, but I don't want to carry that huge case around when traveling...first world problems...
@HoundDogMech
6 жыл бұрын
Got a problem. I need a gimble that takes just the 'SHACK' out of my video. I shoot R/C Model Planes and getting older. I can track the planes no matter where they go but it's the shake even a stabilized lens can't deal with. Any Suggestions on how to set up a Gimbel just to eliminate 'SHAKE'? . Tried Tripods, Mono Pods, Shoulder supports,even gun stock type devices
@JoesVids
6 жыл бұрын
At 6:17 I had to blink and double take with that cloths and hair change!
@vanderhooftamvl6587
4 жыл бұрын
Do you shoot raw video with the 80D?
@BaliDroneServices
2 жыл бұрын
00:48 I think I have clearly seen that those 2 suporting poles (triangle formed) are not welded. 🥺😖😱
@vjoneofficial
5 жыл бұрын
What would be funny is to watch you in the future and see how many hacks you had to do to make it work...and the future cameras just automatically float and stabilize themselves.
@Runafilmmakers
5 жыл бұрын
Hi, how are you? I have an XEEN 50mm T1.5 lens and I want to place it in a Canon C200 4k camera but I need an adapter and I don't know which is the ideal adapter, can you please help me?
@jeffsfolio
5 жыл бұрын
What cable are you using from the follow focus to the 80d to control the camera? Micro to micro USB, or micro to the 3.5 mm jack?
@70poundhound16
5 жыл бұрын
lefty is the coolest
@mackopr
5 жыл бұрын
have you seen the weebill Lab? I have a sony A6500 and my biggest lens is the sony 18-105. Should i stay with the Crane 2 or should i move to the more compact weebil?
@Metaldetectiontubeworldwide
6 жыл бұрын
Nice bro ...love your content 🤩🤩🤗😎
@ethagr8162
2 жыл бұрын
What handle grip were you using in this?
@DanielPereiraYT
6 жыл бұрын
Great vid! Wish I could afford one!
@bilalrahim5824
6 жыл бұрын
I am using the same setup Canon 80d with sigma 18-35mm.... but my follow focus wheel is not working with that lense... why ? So for this i bought zhiyun follow focus separately like your using.... Is this same issue happen with you ? And yeah my crane 2 also vibrate but not that much or when ever its vibrate i use to restart it then its working totally fine
@ktk0358
4 жыл бұрын
hilarious and excellent! dude, you are on steroids!
@alanlam11
6 жыл бұрын
What is your motor setting for the vibration?
@am_9944
6 жыл бұрын
what do you think of ronin S ?
@rolmeridarm
5 жыл бұрын
do you know what adapter you need for feed power to a canon 5dm3? i know is a DR-E6 DC. but what kind of plug pin is it?
@truknayr23
6 жыл бұрын
How did you super slow mo some footage... i know the 80D does 60fps only.
@HarryMaiMusics
5 жыл бұрын
I just purchased the Zhiyun Crane 2 Gimbal and I have Nikon D500. What control cable do I use to connect the gimbal and Nikon camera?
@user-iv9et1px5j
5 жыл бұрын
Yes if you update the crane
@RamonRamirezMisterdj1
6 жыл бұрын
What kind of monitor is that?
@christophharthau3095
4 жыл бұрын
i have had the issue with the vibrating (on my weebill s + a6000 + sigma 30 f2.8) alswell and it turned out that the kamera was just to light
@itsMadrizzle
2 жыл бұрын
can someone send me the link of the hand strap accessory???
@MrCruz-oc8jx
5 жыл бұрын
Hi there friend! Is this gimbal really really good for a canon 80d?
@gezanaphotography8862
6 жыл бұрын
How did you get that slowmotion from 80d? I have 70d what setting can give me a good slow motion?
@germardoumediagroup1472
5 жыл бұрын
ziyun crane do the job when they do the job but when the vibration starts @ crucial wending moment it hurts your production value
@Lokgurung1
6 жыл бұрын
What is the best setting for video in 80d? Thanks
@colinc52
6 жыл бұрын
Haha, first time watch your video, but i like it. Because you are fun, and you not use any swear word in your video 👍🏻 healthy
@Luiscameraman
6 жыл бұрын
This video is COOL!
@QShepardShow
5 жыл бұрын
What HDMI cable are you using??
@yashrajfilms524
6 жыл бұрын
Edya Bhokacha Camera kit ivela Halavtay
@audioincnorthwest
6 жыл бұрын
What's the track name at 5 minutes? Thanks for posting
@giacomo1215
6 жыл бұрын
tripod doggo!
@vinnieli2614
5 жыл бұрын
I want a cheaper camera stabilizer. Do you have any better recommendations?
@Switchkyng
5 жыл бұрын
Wait for the stabilizer you want.
@hfoslayer6195
6 жыл бұрын
If only I have the money to drop on all these gears😭
@vijayangamertamil2727
6 жыл бұрын
Hey bro what's cam use for you...
@savageshutter7211
6 жыл бұрын
like that lut
@Nayeem420
6 жыл бұрын
Great video and funny tooooooo
@MrAntec300
5 жыл бұрын
How the hell do you get slow motion on the 80d?
@vadimvarkentin3120
5 жыл бұрын
probably shooting 60fps, and slowing it down or just rendering to 24fps
@wissvisual
6 жыл бұрын
are that los santos place on Gta San Andreas?
@rhett1734
6 жыл бұрын
Are u using some kind of log on the 80D?
@PotatoJet
6 жыл бұрын
Standard log, I just dial down the sharpness, contrast and saturation a tad bit so it’s not SUPER POPPY but a bit more neutral. In color correction, I just add a LUT
@rhett1734
6 жыл бұрын
@@PotatoJet ahhh, makes sence, i was just wondering, because there are some c-log imitations out there that u can buy and slap on your camera, and wanted to know if you're using one of them :)
@justinjpagan
6 жыл бұрын
so why does it vibrate
@4FIVEHD
6 жыл бұрын
So what let’s shoot 60fps say that
@omarabdelaal9910
6 жыл бұрын
I think I'm lucky to watch this video
@ROASTEDREGIS
6 жыл бұрын
100iso on 80d ? while you were spinning wheel of Zhiyu on that small display 100 showed up when 80d 200 is the lowest iso lol
@97hardbdy
6 жыл бұрын
Man wish i could be in los santos rn😢.
@JPTraveler
5 жыл бұрын
I return it because vibrating issue ~ Feiyu can't do the job !
@CorvusOscen
6 жыл бұрын
*POTATBRO!!!*
@roodick85
4 жыл бұрын
Use loctite on that thread it'll stay there forever
@waynelast1685
4 жыл бұрын
Vibrates because of your weight distribution is odd shape
Пікірлер: 424