The P1S is the best purchase I've ever made. It completely renewed my passion for 3D printing, my old CR-10 mini was great but I started having so many issues it turned me off 3D printing and I stopped using it. Since I got the P1S in may it's been going almost 24/7. 6 helmets, some 4 foot tall weapons, things I've sold, countless other stuff. And Its making my first full armor on it a breeze.
@thegreat3Dini
8 күн бұрын
I'm a PLA goblin, The P1P is my baby, the fact that its $499 now is such a W. I just wish the bambu printers had a 300x300 built volume instead.
@Swainhammer13
8 күн бұрын
here's to hoping we see the next Printer they announce have that larger build volume!
@northernlight8857
8 күн бұрын
@@Swainhammer13 That would probably dominate the cosplay market.
@Swainhammer13
8 күн бұрын
@@northernlight8857 I'll definitely be looking into one if/when it happens.
@TheFreestyleStorm
6 күн бұрын
@@northernlight8857 literally as my wife is a pro cosplayer. i hate making things into tiny pieces. i would scream for a 350mm^3 bambu.
@iHustle33
5 күн бұрын
i hate that i paid 699 plus taxes /shipping so like 796 when it first came out and now the p1s is 599 but under 700 shipped lol. those A holes! They should give us vouchers to get a enclosure for paying that much more for the p1p.
@nerfherder_66
8 күн бұрын
A1 is probably the best entry level. 98% of my prints were successful. My failed prints were completely my fault. (Had the filament set to pla instead of petg on the ams, if you know you know) overall an awesome printer. I can't wait for my next one. The addiction begins. 😅
@justingodbey4984
8 күн бұрын
I got a P1S with AMS, and upgraded to hardened nozzle, and extruder gear. Owning it has been an absolute pleasure. I'm pretty mechanically inclined, so working on the printer, or ams is a breeze.
@tony2tight949
6 күн бұрын
Nice to meet you today in the Jackson classroom! Awesome videos!
@meadmaker4525
8 күн бұрын
Honestly, if I could have the screen and hardened steel hot-end from the X1C on the P1S, it would be absolutely perfect. All the other bells and whistles on the X1C don't really interest me. Still, the P1S is just hard to beat.
@Bigdick-g6d
9 сағат бұрын
You can get a bartend steel hot end for p1s for 35 bucks btw
@rex312prime
6 күн бұрын
I am looking to get a 3d printer soon and looking at getting the P1S combo. I just barely subscribed love your stuff in the background love the helmets. I saw a kingdom hearts keyblade ❤😍 I am in love and seeing the other weapons are so cool. I hope you can get a chance to respond but I am just doing research and it would be my first 3d printer.
@HeWhoRemainsPeavy6777
8 күн бұрын
I just got the P1S yesterday and I love it.
@NerdAffiliated
8 күн бұрын
I’ve been waiting for this one!
@LucasRoss-h7e
8 күн бұрын
Thanks, this video was a lot of help
@aloreactusplayer1776
8 күн бұрын
p1s get a hardensteel for it and get a panatouch to replace the screen if you really want to and he happy :p
@Thekylezone
8 күн бұрын
ONLY reason i am not buying a Bambu yet is because i wanna see if the Elegoo Centauri Carbon is gonna affect the market lol
@Mistertyrannosaurus
8 күн бұрын
Interested to see the Elegoo centauri too BUT the Bambu ecosystem is what drew me in. Currently own 2 Bambu machines (P1S and A1 mini) and honestly I cannot fault either printer. The quality from both is stunning and the app, auto calibration, customisability and just ease of use puts them miles ahead of every other printer right now. I like Elegoo, I own their resin printers, but I can't see them competing in this market. Hopefully I'm proven wrong, we shall see. Price as well, Bambu labs are really not pricey printers at all
@bryanfoster362
8 күн бұрын
Elegoo needs to stick to resin printers. They keep rushing their FDM printers and you end up having to fiddle with them before getting decent prints.
@Mistertyrannosaurus
8 күн бұрын
@@bryanfoster362 always been my experience. Their resin printers are spot on though. Days of tinkering with 3D printers should be over for the most part unless you like that sort of thing, plenty of tinkerer class machines out there
@bryanfoster362
8 күн бұрын
@@Mistertyrannosaurus I had a Neptune 3 Max and a 4 Pro and had to fight with both before I got good results. The 4 got to where it would move so fast the leveling wheels would shake loose. Sure I probably could have slowed it down, but if I did that, I might as well have kept my old Ender 3 😊
@LochneyRBLX
8 күн бұрын
Waiting for Bambu Labs to drop a larger scale printer before I buy another, I got 3 A1s and they're nice, but they have downsides. 🥶
@thedarkness37
8 күн бұрын
May I ask what are the downsides?
@peap1610
8 күн бұрын
not being a p1p
@LochneyRBLX
8 күн бұрын
@@thedarkness37 Not necessarily any downsides I would say, the only thing is it's a bedslinger so it's a bit louder and lower quality, but I do highly recommend the A1.
@idkwhattohaveasausername5828
8 күн бұрын
@@peap1610I have an A1 mini and a p1p. Outside of build volume, they’re basically the same. There’s really no point in buying a p1p anymore, as the a1 does everything but is way cheaper
@vynaltheworld4092
8 күн бұрын
Not to mention the a1 series is locked to only 4 colors if I'm not mistaken
@dark_matter8420
8 күн бұрын
One thing you didn't touch on is the toolless hot-swappable nozzle on the A1. It's such an amazing feature to swap the stock 0.4 mm nozzle to a 0.6 mm for big prints or even a 0.2 mm nozzle for miniatures or high-detail prints. It's such an amazing feature and it really makes the A1 an excellent choice for someone getting their first printer. Also, the A1 is a lot less noisy in my experience.
@CreatedbyMax
8 күн бұрын
Hi awesome videos I have an A1 and one day hope to have a channel like yours! I’m 7 and just started a few months ago when my dad bought me a 3d printer!
@ReaperBrine
8 күн бұрын
I recently bought an A1 over the summer and have been printing non stop. Thank you so much for your videos. They have definitely helped me in my research and progress in this hobby. It has gotten to the point where I have even been able to patent a design I made and be in conversations with a company to make it more viable for buyers!
@xelnok8416
8 күн бұрын
Bought the A1 Combo a few weeks ago after watching some of your videos and it's been a blast. I'm a teacher and I've been printing mini lightsabers as prizes for my students, along with a bunch of different toys for my children.
@artIfactuaI
3 күн бұрын
Now you have to review the qidi plus 4 and compare it to the p1s or x1c
@Andre_M_3D
8 күн бұрын
Any chance you got the qidi plus 4? Interested to see your thoughts on it.
@Sevensup
8 күн бұрын
Something I recommend touching on for the A1...the "Eddy Sensors" in the Nozzle (Active Flow Rate Compensation). A feature not present in the others, excluding the X1 (Lidar). This dramatically helps prevent flow rate issues, especially for those who are not used to fine tune calibrating their filaments!
@jcdixon01
6 күн бұрын
I remember you saying once that you were using your K1 (I don’t recall if it was the max or the smaller one) was your work horse. Flavor of the month? Or is the Bambu Lab video your current opinion? I am not being critical…I am in the market for my first printer in the CoreXY form factor. I do prefer the size of the K1 Max, but throwing that part out…I could get a regular K1 cheaper than the P1. Thoughts on that comparison, or maybe that would be an idea for a video K1 vs P1 - Cage Match!!!
@TJoker---
8 күн бұрын
I'm still a relative amateur but my P1S makes me feel like a pro. I just love it.
@J_spec6
8 күн бұрын
Great video, but it kinda reaaally bugs me that you never mentioned that you can buy that hardened steel nozzle for 35$ from the bambu store and install in the other (idk about the a1) printers. Just sayin
@korriehusky8404
6 күн бұрын
Just get the P1S with the big tree tech panda touch, and you can always add a hotend upgrade like the big tree tech revo hotend nozzle.
@kingicon4958
6 күн бұрын
Hey bro amazing video's and great stuff u made and I wanna to ask I just ordered a resin printer and have no clue yet where to find printing files and how it it work yet but is there a way u can do a ichigo vasto lorde mask print or where can find the file for that really appreciated that ty and keep making does amazing vids brother
@Deanb92011
8 күн бұрын
What about the Qidi 4 plus 799.99 and a 305mm build plate
@omarforbes
8 күн бұрын
Yes I was gonna write the same thing. Seems like a really solid printer. I was waiting on the elegoo centauri carbon but will probably go with the qidi 4 plus
@darkalleywaystudio3975
8 сағат бұрын
I love my P1S! Definitely my most precious tool in my house and can't wait to get more like the A1 mini next. Just to have something actually at my desk and prototype small parts like I used to. The P1S is just too big for that but each printer has its use cases. The P1S can deliver quality, desired materials some printers can't do, and multi-material printing. The A1 mini is perfectly suited for any beginner without the AMS lite and compact. Bambu Lab really has done a nice job with their products, software, and ecosystem of parts. Highly recommend to anyone interested in their printers.
@gamerleague1727
3 күн бұрын
I'm so conflicted so if anyone in the comments can help I'm trying to decide between the p1s and the creality k1 max but I want something that just y'know works. I'm so tired of fiddling with my printer each and every print I do I just want to send it over and it print right
@Eli-l6r
6 сағат бұрын
I have a k1 max and x1c which is basically the same printer but the k1 max needs a lot of tunning and watching prints but the pjs just prints
@taylor_m_237
Күн бұрын
can the P1s, and others, be upgraded to a reinforced nozzle? Also, 4 P!S, 4 Carbons, atleast 1 flsunT1..... how many printers do you have in total?? Also Have you ever thought about trying to integrate modern tech, like a Jarvis, into your suits?
@Bigdick-g6d
9 сағат бұрын
Btw you can buy a hardened steel nozzle and whole hot end for p1s for 35 bucks
@imarobobot8795
6 күн бұрын
We got the X1C on your recommendation and we loved it so much we got a second one. We've had them now for over a year, they're both still amazing. The AMS is a great addition to it, and we especially like the AI detection. Prints don't fail often (99% of the time it's adhesion issues because we didn't clean and prep the plate properly) and it has detected it every single time, saving us time and filament. We ended up getting a textured PEI plate for them, which I'd also highly recommend. Overall, I couldn't be happier with it and will happily recommend it. It looks intimidating, but I was a complete noob with 3D printing, and your videos + the instructions inside had it up and running the first benchy in under 10 minutes.
@dripex9132
Күн бұрын
I bought a elgoo Neptune 4 and have been struggling for weeks and don’t know why I can’t get my helmet to print any advice
@nohorarueda1836
Күн бұрын
I just printed a Deadpool helmet but the smell of glue is overpowering and it burns my eyes what do I do
@abovewongart
8 күн бұрын
your channel is always so helpful, educational, and inspirational
@techsavvyhero
6 күн бұрын
Thanks for posting this Bambu Lab printer comparison, Frank! Lots of valuable info here. I was planning to go with P1P, but now I'd rather get the P1S and get the AMS upgrade later. Cheers!!
@darronstorn3226
8 күн бұрын
Hi franky
@GiZmOSan00
6 күн бұрын
Right after I bough my A1 Combo the price dropped for everything and I could of gotten a P1S instead :( Sadness
@dylanshields7106
5 күн бұрын
I just got the A1 mini combo about a week ago now and have absolutely loved it. I already have a Ender 3 s1 plus. Do for larger prints, that covers that. But I found a lot of things I were printing were quite small. So with that and limited space to put a 2nd printer. I felt that was perfect. I was wondering if you have a guide to reduce the amount of waste from the filament “poop”. Especially when changing colours
@link3740
6 күн бұрын
Ironically just got a P1P before this video dropped as my 20th printer. Looking forward to companion cubing it and putting it through its paces. I got the hardened steel nozzle and camera upgrades to do what I need from the X1 without dropping way more cost.
@amondavis
8 күн бұрын
@Frankly Built I'm wondering would you ever use a belt drive platform 3D print ??
@JackPIZZA_PARTY2804
4 күн бұрын
I have a P1P that I got because of your videos I’m currently using it to print a few helmets and stuff and have loved it
@3D.Anything
8 күн бұрын
Hi Frank a hope you're well,,I'm still using my ender 3 max,s mate 😂 I've upgraded them so much that,, imagine a Skoda and then turning it into a Lamborghini 😂😂,, love your channel pal love and respect to all xxx
@jince00
8 күн бұрын
Great video about Bambus printers! I was just wondering since you mentioned that your current favorite printer is the P1S, how does the Creality K1 Max stacks up against it? Since it has a little bigger build volume I have been more interest in that lately. But in your opinion, what makes the P1S better than the K1 Max? curious to hear from someone who has used them both :) Keep on with the great work and videos :D
@rex312prime
4 күн бұрын
Can I get help on smh I am super curious if you can 3d print wigs. I want to do that for cosplay and haven't seen videos for it. I wouldn't know how. I don't want to buy a wig and then either me or someone else do it cause it probably cost a lot cause the hair is super complicated. I just want to know if it is possible
@davidwarriner1639
5 күн бұрын
Hey Frank great video. But, you didnt mention that the none X1C printers can be upgraded with a hardened steel nozzle.
@goalie40404040
6 күн бұрын
Good review. I do have a video production tip for you. Your audio is off a little it sounds like you are filming in a small space. Hang up a ferny pad or blanket heavier the better on the wall behind your camera. It will reduce/eliminate that echo and some of the sharpness in the audio. Foam egg crate on the off camera walls will do wonders as a permanent solution. I have making tv shows for 18 years. Keep up the good work.
@warwolf555
8 күн бұрын
How heavy was the printed Megatron cosplay to wear? Was it restrictive or more hard to wear than a foam cosplay might be? Curious as I have an idea in mind for a fully 3D printed robot cosplay and wanted some tips & feedback from someone who's done it fully printed.
@darren990
8 күн бұрын
l lowered my z off set by 0.01 and it stick well better my favourite plate is the try holographic one from ali-exspress with pei-peo gold and triangles .bambu do a test for that banding just ask them for it its like 3 cubes in vace mod
@telmacastro7375
8 күн бұрын
Hey!!! Don't bully the A1 mask, it just has a little acne going on😂. It happens sometimes.
@CodyGoski
8 күн бұрын
Just curious, do the Bambu printers ever break to a point where they need a new part? The website doesn't ship to PO boxes, and I found one other place that does but shipping is really expensive. I really want to get a Bambu, so if you rarely need to replace anything on them that would be great.
@burgerdad5681
5 күн бұрын
How would you rate the ams lite vs the ams? Also any idea when the p1s/x1c might get the hot swap nozzles of the a1?
@lovevamp5446
7 күн бұрын
I really want to buy the bamboo p1s but what is your opinion about the copyright claim that is against Bamboo and what will the consequences be if Bamboo loses?
@critter42
8 күн бұрын
My next printer is going to be an A1 Mini - for no other reason than to continue my collection of mini printers - Monoprice Mini, Prusa Mini, Voron 0.2, Positron 3.2, KP3S...
@JohnyBee013
6 күн бұрын
Just got an P1S off this video! Thanks Frank!
@pandostudent
6 күн бұрын
You’ll notice the stainless steel nozzles have been discontinued, you can only get hardened steel nozzles now. Nice bonus.
@SLICER777.
8 күн бұрын
Thank you so much. I wanted to get one this year but a house took priority. I'm hoping next year.
@NachoKingLLN
3 сағат бұрын
How is the loudness for these? I want to get into 3D printing but I live in an apartment. I also work from home so I’m curious about sound and volume.
@FranklyBuilt
2 минут бұрын
If it’s in another room you’ll hardly notice it
@RathOX
8 күн бұрын
you missed X1-E! some of us need the heated chamber
@FranklyBuilt
8 күн бұрын
Honestly I 100% forgot about that haha but it’s a very specific use case that doesn’t really align with 99% of my audience but you’re correct
@ammonslayden
8 күн бұрын
You need to add sound dampening to your recording room. It sounds like you're recording in your bathroom.
@danielcoombes3310
13 сағат бұрын
Hi Frank, this is totally unrelated to this particular video but I was wondering, where did you get your files for the Megatron suit? I'd be very greatful if you could please point me in the right direction
@FranklyBuilt
Минут бұрын
It’s a custom file
@sk8ter4fun
8 күн бұрын
I wanna get a p1s and replace the UI with a touch screen I found on Amazon lol
@labmixz.
8 күн бұрын
what about the rumor of a bigger Bambulab in Q4 /Q1 ? :)
@keiz_
8 күн бұрын
I was planning to get a P1S but was hoping for a couple other things that a P2 was gonna bring. Just saw Qidi announced their Plus 4 and it looks phenomenal, especially with the build size. I think I'll pick up a Plus 4 for now, and an A1 or A1 mini later as a secondary printer, and for printing smaller projects.
@cube1us
Күн бұрын
I’m not sure if others have commented on this already, but you can put the hardened steel hot end on the P1 S and presumably the P1 P for pretty minimal additional cost.
@FranklyBuilt
17 сағат бұрын
Yeah you can upgrade them
@BelfastBiker
8 күн бұрын
90% of the time we'll be printing basic PLA. Why on earth do a test on some clearly quirky filament? Everything I've created with my A1 sofar is far superior quality than those four masks, all of which are disappointing results.
@FranklyBuilt
8 күн бұрын
It was Bambu filament 😂 and I explain why. And show plenty of prints that came out better.
@justinsteele1039
6 күн бұрын
How do you make your armor stand for the Iron Man suit?
@rustyv6274
8 күн бұрын
The x1c is not worth it. The ai never works like it says.
@michaelalanstlouis
8 күн бұрын
Hey Frank. I could pretty well predict what you were going to say. I love my P1S with AMS. Are you going to comment on this Bambu lawsuit? I’m worried it’s going to delay new products. Or hamper them.
@FranklyBuilt
8 күн бұрын
Nope. Not my area of expertise. It’s not an issue until it’s over
@pandostudent
6 күн бұрын
Oh and the X1 can be used a filament dryer.
@zackchapman8701
8 күн бұрын
For the p1s can can replace hotend to be like carbon?
@Swainhammer13
8 күн бұрын
So i went Straight to the X1C w/ams as my first printer, with no real knowledge of 3D printing. (It is overkill at the moment for me, ngl) Fast forward a few months(with lots of teaching from friends), and I don't regret it! I can count my failed prints on one hand. I'm still branching out from PLA & exploring other materials, but nothing truly exotic that the printer is designed towards, yet. I do have future plans to print more exotic materials, while my main use is more aligned with yours. Now that I'm planning for a 2nd printer in the distant future, this video does have me thinking of the p1s! Great Video as always!
@BelfastBiker
8 күн бұрын
A1 Mini: "Am I a joke to you?" Seriously though, if you already have a printer and high quality things like miniatures are some of the things you print, get an A1 Mini as a second printer, and put a 0.2 nozzle on it. That's what I did after a week of having an A1, and accidentally printing a super HQ 44 hour print job. If you ever need to print things faster in normal quality, it's crazy easy to switch nozzles. EVERYONE into 3D printing should have at least a cheap second printer.
@sk8ter4fun
8 күн бұрын
When we getting the video of the d-16 build 🤣
@swiftfox1580
8 күн бұрын
So when's the Megatron video? 👀
@Krunkle78
8 күн бұрын
My wife just got me the P1S combo for my birthday, I went from an Adventure 4 to that sooooo HUGE upgrade I don't think I've really stopped printing lol my only issue so far is on max size prints a corner has listed so I messed them both up, just gotta figure that out
@hansherrera6969
8 күн бұрын
p1s can i use the 45 rolls i have of sunlu pla+
@BeatstormX
8 күн бұрын
Easy answer: Qidi x plus 4
@FranklyBuilt
8 күн бұрын
…no
@BeatstormX
8 күн бұрын
@@FranklyBuilt Is a review video planned ?
@omarforbes
8 күн бұрын
@FranklyBuilt I would love to hear your thoughts on the new Qidi plus 4 printer
@BeatstormX
8 күн бұрын
@@omarforbes the pps cf looks sooo good on helmets, also the pront quality is equally as good as Bambus if not better
@AlexDev14
8 күн бұрын
day 55 of asking for a doom eternal helmet
@ManleyArts
8 күн бұрын
Still waiting for the large format....
@grimmsobek2057
8 күн бұрын
Frank I have watched every single video going all the way back to 5 years ago and In my opinion you sir are a 3d printing cosplay God You see I to am a nerd when it come to manga and FYI wing zero is my Favourite Gundam I just wanted to say thank you for all your hard work and dedication now I know it possible to become my Favourite Characters THANK YOU
@SIoopDog
8 күн бұрын
What is better the P1P or k1max
@brentcox6201
8 күн бұрын
My only question is who's Dr Doom file is that, would love to pick it up and crank it out on my P1P
@FranklyBuilt
8 күн бұрын
Do3d.com
@Enjeenier
8 күн бұрын
NEW VIDDDDDDDD!! Cant wait for which prusa is best for you😂
@William0603-y8b
8 күн бұрын
Idk why I watched this because I already have a printer 😂😂
@Brandon-hd9wm
8 күн бұрын
How many build plates do you have haha? One for each printer or 2 for each one?
@FranklyBuilt
8 күн бұрын
2 for each
@zylowolfzan3345
8 күн бұрын
My first printer was an Elegoo Neptune 4 Max. Which is definitely a Problem Child, but I got it at a great deal during the Labor Day sale, and I wanted something that prints REAL BIG. When it works, it's great, when it doesn't, it's frustrating, but I think it's been a good opportunity for me. As my first printer it has made me actually LEARN more about how to adjust and tweak settings etc. And its shown me that I DO like this hobby, even when it causes problems. That said, I have been seriously considering grabbing a P1S as a second printer just for something nicer to handle and do more consistent printing without needing to tweak and adjust settings constantly. I just REALLY wish that Bambu made something with a bigger build area. I wanna print REAL BIG! Maybe someday soon.
@KryptonsSon
7 күн бұрын
It's funny, I've had the same experience with my Neptune 4. A lot of tweaking, etc., but so much valuable knowlege about 3D printing that I would've missed out on by getting a printer that just worked out of the box. I acually enjoyed the failure and the tinkering just as much as every good print. Now it's working perfectly I would say 80 percent of the time and I absolutely love it! I was thinking about getting a P1S but I couldn't bring myself abandoning my lovely Neptune 4 :) Maybe on Black Friday there'll be a good deal on the combo... I'll probably get it then but I'll alway keep my Neptune 4 ;)
@MrLocke-bk3om
7 күн бұрын
I’m interested in hearing more. I’m considering a Neptune as my first printer. Recommend it or no?
@marley9380
4 күн бұрын
Will you be review the K1 series?
@raymondgomez8687
8 күн бұрын
Do yourself a favor and get your self the P1S. I’m about to finish my 4th MM Power Ranger helmet (along with some other random prints) and each one comes out better than the last the more I learn about printer settings and post processing. I’m so glad I finally took that dive into this hobby and I’m very happy with how far I’ve come. Special thanks to you Frank for helping me get into this and for all the tips and tricks! You’re a huge inspiration! Love the videos :)
@DK-vx1zc
6 күн бұрын
None of the above... QIDI
@jarrodlangford7692
8 күн бұрын
I have 4 p1s and 4 a1 mini. The a1 mini is my favorite. I hope they drop even more in price when large one drops.
@paulb36utube
8 күн бұрын
Where do get the dr doom file from.
@MiguelFontoura
8 күн бұрын
That wobbly table is so distracting xD
@adhdengineer
8 күн бұрын
they need a 320mm cubed printer for me to spend the money, only because it's a resonable move for them to make so i kinda expect them to do it as the next printer release (i'm kinda surprised they went with the A1 series but I can see them wanting to hit that market segment as well), and i'm not gonna spend the money on the p1s only to have buyers remorse when the bigger ones come out ;)
@sometingclever
6 күн бұрын
Very helpful video
@Epyon757
8 күн бұрын
I’m holding out for a core xy and the K2 max has a build volume I like. Just waiting for guys like you to get their hands on it and test it out.
@BnR_Tech
8 күн бұрын
My Question now is what would you take for almost the same price because I have found K1 max for almost same price as P1S so K1 Max Vs P1S and I love my K1 max and has been a champ but I would be interested to know your thoughts on this match up?
@FranklyBuilt
8 күн бұрын
The Bambu has better quality print wise
@BnR_Tech
8 күн бұрын
@@FranklyBuilt now for stuff like just multi color prints that you would normally just use a1 would you say a anycubic Kobra 3 could do close to the same as the A1 I really like the AMS version that anycubic uses also with the dryer in it? Also thank you for the response and help keep up the awesome work.
@BoomsterJoe
6 күн бұрын
i ❤my Bambu Lab P1S 🥰
@YouNoMeMr3Eighty
4 күн бұрын
I needed this video!
@Flash007b
8 күн бұрын
I want the one that has a 300x300 build plate 😔
@deadshot1573
8 күн бұрын
now,P1S or k1 max ?
@AlexTheAdded
7 күн бұрын
Has anyone tried using the X1 AMS on the tool heads of the Prusa XL?
@FranklyBuilt
7 күн бұрын
They aren’t compatible
@AlexTheAdded
7 күн бұрын
@@FranklyBuilt you mean they aren't compatible YET! Lol
Пікірлер: 252