If you have any questions just leave them below and I will get back to you. Thanks, Brian
@SportfishingBoats
5 жыл бұрын
Dave Scarpitti I’m on mobile at the moment so I can’t get you a link. Amazon is as good as any. Presta white wool single sided and green blended is what you want. I’ll get a link for you this evening when I get in front of computer.
@eddieandreu8398
3 жыл бұрын
Ok Brian let me see if I got it right. Lol If the Boat have a heavy oxidation then i will use the presta 890082 white and then i use the green 890085 to polish? Wow about if the boat doesn't have a heavy oxidation is just light i still use the white and then the green one? Im going to do a black and doesn't have a heavy oxidation is just light would you recommend i do the same process first white then green and finish with wax? I also using the same product that you recommend and i love it Presta super cut 134501 then ultra polish 133532 and the wax fareca. Do you recommend something else. Thanks!!!! Eddie
@SportfishingBoats
3 жыл бұрын
eddie andreu Here is the simplest and best answer. Do some “test spots” on the worst looking area on the boat. Sure fire way to know how much to do😉
@rexfordrounds
2 жыл бұрын
Ideas on Awlgrip paint restoration.2000 402 Sabre? Thanks, really enjoy your presentations. Rex
@therosses5
2 жыл бұрын
Hey Brian, your channel was doing great. You do an EXCELLENT job creating videos. Your voice is broadcast quality, as well. But it looks like you stopped creating videos..:-( . I hope you are well. Dumb question...do we have to clean the scum off the gel coat before we start getting the oxidation off or will that take care of everything in one task? Also, how do people clean the underside while on the trailer bunks? I hope you can get monetized and get this channel rocking. KZitem needs KZitemrs like you!!!
@charlesflorczyk8088
3 жыл бұрын
This guys the real deal! I bought everything he suggested. Brought my boat back to life! For the third of the price of an estimate and I have the tools to do it again! Thanks man.
@SportfishingBoats
3 жыл бұрын
That is awesome!! Glad it went well!
@wazup3333
11 ай бұрын
@@SportfishingBoatshi, I just had a boat with very light oxidization on one side and medium on the other side since it was exposed to sunlight more. On the lighter side I used a yellow harbor freight cutting pad and rubbing compound. Looked perfect no oxidation shooting through. Skipped polishing and then applied royal satin Marine wax with the same pad after washing. On the medium side I used a wool pad and then applied wax with the yellow. After 1 day of saltwater use you can see oxidization shooting through certain spots... Do you know why and how this happened? If there is no oxidization shooting through after compounding why would this happen?
@rogermorris5224
Жыл бұрын
I have watched countless videos on removing oxidatation and your videos are by far the most instructive. Thanks!
@kencattell8601
3 жыл бұрын
Brilliant. No faffing around or waffling just straight talking backed by experience. Thank you.
@SportfishingBoats
3 жыл бұрын
Ha! Thanks
@cynthiaenglish2736
2 жыл бұрын
Your videos are among the best I’ve seen on boat detailing. You break things down so expertly and drill down immediately on the key points. Very easy to understand. Our loss that you haven’t made more - but I hope you are doing okay. Maybe one day….
@bluemut55
2 жыл бұрын
We use double sided mop heads solely for the fact that they are balanced better. You can put a velcro pad on but if you are slightest bit off it will vibrate. It may not seem like much but it will tire your arms and your shoulders. Good video. And Presta is a fabulous product.
@MattMyslakowski
2 ай бұрын
Man, I appreciate you and your video. I was basically looking for a buffing for dummies video and all the videos I seen talked like you already knew what you were doing. Thank you for slowing it down. I truly appreciate it lol
@James-ej7yd
Жыл бұрын
i have watched a dozen videos regarding boat polishing and this one by far is the best. thanks so much.
@cobblewright
3 жыл бұрын
Excellent video. Straight and to the point with useful real-world information.
@SportfishingBoats
3 жыл бұрын
Thank you!
@dandoapp1025
3 ай бұрын
Great explanation! Not all over the place like some of these guys.
@FoilFanatic42
4 жыл бұрын
Very useful Video, it would be nice to see a video where you demonstrate in detail an entire boat. For sure the best channel for boat detailing, keep up the good work!
@SportfishingBoats
4 жыл бұрын
Sorry, I somehow missed your comment. Thank you for the feedback. I'm trying to do just that. Difficult to find a boat in the right location for lighting and sound. But I'm working on it! hopefully soon. Brian
@STILLNIGHTPEARL
2 жыл бұрын
Buff and shine sells double sided wool pads and an extension for those pads that’s only $5. I like the double sided pads because they’re pretty much two pads in one, plus buff and shine has wool pads from heavy cutting to finishing, a double sided pad is always perfectly balanced since it’s always centered, with Velcro you have to guess it a few times to get it close.
@eddieandreu8398
3 жыл бұрын
Hi Brian i Learned so much by watching your videos you explain everything perfect. Thanks!!
@SportfishingBoats
3 жыл бұрын
Eddie, your welcome! Let me know if you have anymore questions.
@greatmusicgoodfeel826
4 жыл бұрын
A link to get the pads would be very helpful and quick.
@richardhughes2631
2 жыл бұрын
Thanks ... very useful for polishing my boat
@ronwitcher7117
3 жыл бұрын
thanks for educating me on proper way to wax boat. very informative. i did not see link or names of the polish and wax and could get when you said, Ron Richmond, VA the chesapeake bay
@johnhubbard6262
2 жыл бұрын
40 years of contracting taught me Makita is better than Dewalt in a refined sort of way - but if you need to abuse a tool, like a feather it on and off repeatedly and give it continuous abuse the Dewalt will outlast the Makita. That being said Plugins are Makita for personal - Dewalt for the field - And Festool in my dreams - Milwauki 12v Fuel for all battery tools
@ss939ww
Жыл бұрын
With that 7” Makita, does a 9” Pad work or do you need a 9” backer? If so, which backer fits? Thx. Great videos. You should’ve done more!
@charlesflorczyk8088
3 жыл бұрын
Syracuse NY here!
@SportfishingBoats
3 жыл бұрын
First from “the Cuse”! Let me know if you have any questions.
@charlesflorczyk8088
3 жыл бұрын
Just got a quote for $1200 to get my boat done so I bough everything including Makita buffer from you channel for a third of that. One question - he would not touch below the water line? Can I compound, polish and wax that area too?
@SportfishingBoats
3 жыл бұрын
@@charlesflorczyk8088 Yes, you certainly can.
@davidbaxter6843
3 жыл бұрын
Nice job making it simple. I have rubbed a lot of cars. Boats are different. My gut told me exactly what you said. Many of the videos I have watch get way too technical. Thanks.
@SportfishingBoats
3 жыл бұрын
I agree, they are very different.
@zconner9138
3 жыл бұрын
Just subscribed.... from Pascagoula,MS
@heelside226
2 жыл бұрын
For waxing after polish, do you use the same polishing pad?
@mikeroberts-id8ny
3 ай бұрын
Great videos! I have a couple of questions. 1. What type of pad do I use for Waxing? 2. I am replacing original stickers on my boat. I do have oxidation on my boat. So I will use a compound first. When should I apply the new stickers. My guess is after the polish but before the wax. Just want to make sure the stickers will adhere after polishing. Thank you
@louisg4845
3 жыл бұрын
Makes total sense , thanks
@christopherb2025
Жыл бұрын
Great informative videos! My question you hit on briefly is getting into tight spaces and under rails etc. Will your recommended machine and pads work in these tight areas vs maybe smaller machine/pad? Also cleaning/polishing non skid. Do you have videos demonstrating tight areas, non skid? Thank you again for sharing! Awesome job.
@rickzwolinski
3 ай бұрын
Could you tell me the difference between using compound to remove oxidation versus wet sanding.Ive used both and the wet sand is not as messy
@j.f.brunet6218
4 ай бұрын
I bought all the Presta products you suggested. I find the compound leaves the surface feeling smooth, but when I use the green polishing pad with the Presta polish, the surface seems rougher and not as shiny. Weird right^. Would you suggest using the blue pad for polish vs hte green pad? Thanks for your videos, they really help
@knollie81
2 ай бұрын
Dumb question… how do you remove the 3M adapter? I’m having a heck of a time getting mine off and putting the regular backing plate back on.
@SleepisForTheRich
27 күн бұрын
Thank You Sir.
@AZWorm41
Жыл бұрын
Thank you. That all makes sense. Love your videos.
@richieallen5131
3 жыл бұрын
Forgot to add that I still have the dual action polisher. Should I use this for polishing and waxing or should I just stick with the Makita for everything?
@SportfishingBoats
3 жыл бұрын
Use the Makita for everything.
@davidl7672
2 жыл бұрын
you seem like the right person to ask this question. The keel of my boat has some wear on it from rubbing on sand bars. The white has disappeared on the end of it. Is there a way i can fix that or is that something that needs to be done by the pros?
@skybox3550
9 ай бұрын
Question. My boat is pretty new. I have it waxed every year but it's starting to get dull now. So I would use a polish at this stage. Now do I need to remove the wax before polishing to get started? Or just start with my polish and call it a day? Thanks sir!
@milosusa
3 жыл бұрын
When and how to clean those Presto pads ? Or how they look when time is throw the away and buy new one ? Maybe stupid question , but I am using those for first time using Makita 9237 with Presto Super Cut trying to get oxidation from my boat . Glad to found your videos how to do it.
@opz22377
2 жыл бұрын
What brand do you use? Couldn't quite make out what you said and you didn't show it very well
@Pickichvino
2 жыл бұрын
Brian, First, I really appreciate the videos and your expertise. Thanks for passing on all the knowledge to us at home! I’m out of Biloxi, MS. I use your setup verbatim, makita and Presta products, I too have found they are the best. Lately I have been working on some boats with gelcoat that is oxidized to the point that it’s badly pitted. It takes me 4-6 passes with the Supercut to get that head on gloss. Even after this I’ll have a good cut on top but some of the putting can still be seen. The setup I’m using is Presta white wool pad, Supercut on a 3M backing plate on the Makita at about 1500-1800 RPMs. What have you found to be the best product combination on buffing gelcoat oxidized to that degree?
@tedmiller1745
3 ай бұрын
What is dual? I bought a harbor freight unit and has variable speeds. What speed works best after wet sanding to throw on some compound? TYIA
@MiguelRamos8486
2 жыл бұрын
You gained a subscriber! Thanks for the very informative videos. Question on the pads: Do you normally wash them after you finish a job or replace it? Please elaborate and thanks in advance.
@DavidMitchell-f6f
Ай бұрын
Very good
@marknohr4433
Жыл бұрын
So you have listed a buffer that has a 7" pad spec but I'm only finding the pads you recommended in 9" pads. I don't want to buy the wrong pads. Is there something about the PAD spec that would mean the 9" pad will fit on the 7" buffer?
@6kproperty
Жыл бұрын
Hi Brian. A few questions. First, Unfortunately the Makita polisher isn't readily available to me. Thoughts on the DeWalt DWP849X? Second How many of each single side pad do I need to do a 26ft boat with a flying bridge? Thanks in advance Cheers!
@kiko08matsingico
4 жыл бұрын
I used presta gelcoat compound with white wool cutting pad then follow up with D.A. machine foam cutting pad then D.A. for polishing and hand wax... 😊😊😊
@SportfishingBoats
4 жыл бұрын
Sounds excellent. How did it turn out?
@kiko08matsingico
4 жыл бұрын
It turn out great i did that coz the boat is well oxidized still depends on how bad the boat is.... can you review some wax or sealants for boat?
@SportfishingBoats
4 жыл бұрын
Have you seen the video entitled "preventing oxidation on boat gelcoat" from my channel?
@kiko08matsingico
4 жыл бұрын
Ill watch it tonight bro. Thanks for the info 😊😊😊😊
@SportfishingBoats
4 жыл бұрын
Your welcome! Waxes and Sealants aren't the secret. Polishing before you wax IS THE SECRET! Let me know if you have any questions. Brian
@mdowling73
4 жыл бұрын
Would you recommend a cleaning spur? Is that necessary and does that prolong the life of a pad? Great videos btw.. you have motivated me to finally get the chalk off my 18' CC.
@SportfishingBoats
4 жыл бұрын
mdowling73 cleaning spurs or a brush(my favorite) are definitely helpful. I wouldn’t say it prolongs the life, but rather improves the performance. When your pad is full and thick with the right amount of product you get optimum use out of it. 1 pad should be fine for an 18. Good luck with it!
@chrisasaro485
3 жыл бұрын
Hey Brian. Great video and channel !. Thanks for all you do to help us here! What's the difference between the black and white wool cutting pad, the black cutting pad, and the white cutting pad? Are they all the same? Thx!
@adegraw100
4 ай бұрын
Where can I buy the pads and what brand and size? What brands are the three step waxes?
@holtfogarty6001
2 жыл бұрын
Hey thanks for the video good stuff. What pad would you recommend for the polymer wax application. Again just using the rotary tool nor orbital.
@josephvelky276
3 жыл бұрын
Brian I'm using 3M restoration wax. It says one step. My detailer used it last year and it looks great. I'm doing it myself this year. Will I need two pads still? One for putting on the wax and one for buffing it out??
@SportfishingBoats
3 жыл бұрын
I don’t use restorer waxes. I actually made these videos because of my dislike of the damage those products do over the years. I wanted to show the better way to do it.
@leighannedearingsilva6112
Жыл бұрын
Hi there! I don't have a boat, but I do have a fiberglass RV, and I think they're about the same. I have used the heavy wool pad with Meguiar's one step, and brought back a fantastic shine. Adios oxidation! So now that I have de-oxidized, polished and waxed (spray on Turtle Wax Graphene Flex Wax) what should I use for the final buffing? Will the blue polishing pad you mentioned be too abrasive for a final touch? Thanks in advance. (And let me just add, removing years of oxidation from a 23 year old 32' class A is a colossal pain in the a$$! I now completely understand why GOOD detailers charge well over $1000 for this. You people are saints! But after hiring one clod who did a HORRIBLE job, I just did it myself, so now I just have to maintain it)
@CaptainRon1950
2 жыл бұрын
Great tips. Thanks! How many pads would you estimate I need for a 44" Gibson Houseboat?
@steveacord8935
4 жыл бұрын
After polishing what do you recommend for applying my wax and buffing the wax. Also do you recommend wiping the compound or polish off with a microfiber cloth?
@SportfishingBoats
4 жыл бұрын
Yes, I do recommend wiping of compound and polish with microfiber. Which brand of wax are you using?
@monsternorm4245
5 жыл бұрын
Hey Brian, if I got this right it's the white wool pad for compound. Green synthetic for polishing, than what do you use for the wax? Thanks for all the input.
@SportfishingBoats
5 жыл бұрын
Norm, sorry, I think I missed this question. Yes, White for compounding, Green for polishing, and I usually wax by hand.
@ianfirestone4698
4 жыл бұрын
Sportfishing Boats so I am on presta’s website now, and looking to purchase the setup you mentioned above. I see the white wool pad for compounding listed as “white wool heavy cutting pad”. The green for polishing is listed as “green blended wool light cutting pad”...is this what I want? I am a little confused because I see a blue pad labeled “blue blended wool soft polish” available as well. Newbie here so I am getting confused!
@mikev7396
Жыл бұрын
Can you tell me how to remove light brown stains caused from leaves left on the rear floor of a fiberglass boat for many seasons, ive tried string bleach mix, deck cleaner and rust remover without results?
@hunterjohnson9016
5 жыл бұрын
Brian, I have a light oxidation on the stern area, and maybe 5-6 feet towards the bow on my boat. Past that it's in pretty good shape.... I don't want to cut too much, so what would you recommend for me? It's a black boat and I don't want to end up with tons of swirls. I have a decent polisher I have used on clear coat that works well. What pads and compound would you recommend for light oxidation, and finally polish, for the black on my boat?
@SportfishingBoats
5 жыл бұрын
Hunter Johnson what usually happens when you try not to cut “too much” is you don’t do enough. Especially with dark colors. If I can see oxidation I’m using compound and a wool pad. Then polishing with a blended pad. Did I answer your question?
@knotfeelnit
4 жыл бұрын
Orlando, FL. Hey Brother thank you for the videos, great job. I picked up a Makita. I know what pads, cutter, polish and material you use, but I don't see anything about the backer attached to the Makita. Are you using what is supplied with the Makita, or is it from another manufacturer? Thanks
@SportfishingBoats
4 жыл бұрын
knotfeelnit sorry! I left you hanging on that one. You can use the Makita pad that comes with it. I do prefer Presta or 3M’s backing plates. But it’s not any big deal. That Makita is an awesome machine! Good luck with it and reach out if you have any more questions. Brian
@jamesmh626
4 жыл бұрын
@@SportfishingBoats - is is the 3m 7" backing plate?
@robertmoriarty5686
4 жыл бұрын
Great stuff thanks. A few questions: I have bad shoulders so hand waxing and wiping tough.Can I use a my orbital to apply and remove wax? Also some recommend acetone wipe down between steps?
@SportfishingBoats
4 жыл бұрын
Robert Moriarty My shoulders are in bad shape too from years of doing this! I feel your pain(pun intended)! Absolutely you can use an orbital and use Farleca Polymer wax. Much easier on and off😀 than other waxes. No need for acetone at all between steps. Presta cleans up extremely well(less wiping this easier On my shoulders). 3M compound for example dries on surface and requires more effort to remove. Good luck with it!
@jayd5864
4 жыл бұрын
Sportfishing Boats hello! Appreciate you sharing your tips. What kind of pad type and brand would you recommend for applying and or removing the final wax with the Makita ?
@SportfishingBoats
4 жыл бұрын
JAY D Your welcome. If you’ve seen my other videos you know I use Farleca polymer wax a lot. That goes on and off so easy I just put it on by hand, especially on the inside. You can apply it with a soft foam pad on the hull if you like. As long as it’s soft it will work fine to apply and remove by hand with microfiber
@vdubing01
2 жыл бұрын
Good to know thank you. What brand compound and polish would you recommend for an average boat owner? Thanks.
@BenjaminRay
2 жыл бұрын
What pad do you use for waxing? I assume the synthetic polishing pad still cuts too much for finishing with wax.
@vladimiraitpakov8926
3 жыл бұрын
Hi. Great video! I was deciding between makita and dewault polishers, and decided to go with makita based on your recommendation. It comes with a 7 in backing plate, but I dont see any 7 inch presta wool pads, only 9 in. Do I have to get a 9 in backing plate? What size backing plate and pad do you use? Thank you!
@roxannbergquist984
3 жыл бұрын
Brian this Dave from Minnesota how warm does it have to be before I can compound my boat? Appreciate the feed back Thanks
@SportfishingBoats
3 жыл бұрын
Sorry for slow response. I missed your question somehow. As long as its above about 40 degrees the products work well.
@Lhurd55
4 жыл бұрын
Why do you feel the best way to get rid of oxidation is by buffing it Away? What about either dry sanding w/1000 to 1500 grit sandpaper (which is what is 3M & it’s Perfect-it Products recommends ) or wet sanding by others with same 1000/1500 grit? I have a 20 yr old Key West Center Center console that is super dull & faded, the sides of the boat does still show signs of having some shine, but not much. What are your thoughts? Thanks
@SportfishingBoats
4 жыл бұрын
Wet sanding is more agressive (removes more of the gelcoat) than just buffing. Sometimes its necessary, sometimes not. The best way to see what you need to do is with a test spot. If you spend more than two minutes compounding out a 2 foot by two foot area, then its time to wet sand.
@21bluefins
6 ай бұрын
What pad do you use for the third step, waxing?
@dshap66
3 жыл бұрын
Helpful Video. Thanks Brian. I have a good sized boat and applying the (final) wax by hand isn't really an option. Is there a pad you would recommend for the rotary polisher? Thanks again!
@SportfishingBoats
3 жыл бұрын
Any soft foam pad will get the job done. Nothing fancy required😉
@PoppaWigs
2 ай бұрын
How many pads should I get to do my 28'?
@joshuasweeney7350
11 ай бұрын
Can you use polishing pad for wax as well after using polishing chemicals on same pad?
@chrisroberts6694
3 жыл бұрын
Hi Brian- I have a Cobalt 262 WSS. After spending the summer on the lake i would like to polish the boat before putting it away for the season. Since the boat is a WSS it has graphics on the side that appear to be on top of the gelcoat (something like a decal). Is it safe to compound and polish over the graphics? Also, since I have never done this before what are the 5 mistakes that beginners do when polishing a boat. I have purchased all of your recommended products for this project. Thanks.
@SportfishingBoats
3 жыл бұрын
Chris, sorry for slow response. Don’t worry about graphics. Go over them like they aren’t there. Common mistakes in no particular order. 1. Not compounding and polishing enough.- don’t stop till the surface looks new. 2. Waxes aren’t the secret.- polishing is! Pick a wax you like and move on with life! 3. Fear of “burning” gel coat. Only buff in shade and keep it moving and you’ll never have any problems. 4. Trust the process. It works, but it is work... 5. Remain humble while your neighbor drools at your boat...
@greatfallsboy
4 жыл бұрын
Love this channel!! Really informative! How oxidized does the Gelcoat need to be to warrant these pads, and the Presta Super Cut Compound, followed by the Ultra Polish? I had my blue and white, 1999 Cobalt 206 professionally detailed 2 years ago, but have tried to keep her waxed. The blue below the rub rail still looks glossy, but maybe a bit faded. The blue above the rub rail is oxidized...but not severely. I don't want to be too aggressive on the Gelcoat. Any advice would be greatly appreciated!!
@SportfishingBoats
4 жыл бұрын
Sorry for slow response. Drowned my phone a few days ago... Do not worry about being too aggressive. Get the boat to where it is glossy as it can and routinely polish. Definitely get some compound.
@SportfishingBoats
4 жыл бұрын
I’ll almost guarantee you’ll need to compound. The way to figure out how much is to do a “test spot”. This method is fool proof. Everything else is a guess.
@SportfishingBoats
4 жыл бұрын
If you haven’t seen the video yet “preventing gelcoat oxidation”, watch it. Polishing is the secret! It’s not the wax...
@greatfallsboy
4 жыл бұрын
Thank you very much! Getting my Makita and ordering compound today!
@SportfishingBoats
4 жыл бұрын
Jerry Earll That Makita is a sweet machine. Let me know if you have any questions as you go along.
@verlinjanzen2024
Жыл бұрын
How do you apply the wax after compounding and polishing?
@rperezcorona
9 ай бұрын
Hi Brian, what pad do you use to wax/seal?
@ttlkamd
4 жыл бұрын
Sorry for the question; I am new to this. What size is the backer and what size are the pads? 7 inch?
@SportfishingBoats
4 жыл бұрын
ttlkamd some manufacturers say 7, some 8, some 9 for their full size rotary pads. There all the same size.
@Vobnah
4 жыл бұрын
@@SportfishingBoats Good day Brian. Loving the info you are putting out there. Keep up the good work. I am wondering about size of pads also. The polisher I am thinking of getting comes with a 7" hook and loop backing pad, but Presta's pads are 9". do I have to get a larger backing pad for the polisher to use the 9" pads?
@SportfishingBoats
4 жыл бұрын
Peterdotters P there is a lot of confusion on this created by manufacturers. All wool pads 7-9” are the same size.
@Vobnah
4 жыл бұрын
Sportfishing Boats I get what you (and the manufacturers) are saying now. 7”/9”doesn’t mean it fits a 7” or 9” it means it fits a pad 7” to 9”. Got it thanks.
@SportfishingBoats
4 жыл бұрын
Peterdotters P it’s needlessly confusing. Good luck with it. If you have any more questions just let me know!
@goochiebear2718
3 жыл бұрын
Can you send me the model of the Makita orbital buffer that you recommend or you like in this video. I am wanting to get set up to do my oxidized boat. Thanks,
@Jerry-xx8dx
4 жыл бұрын
so im guessing use the white for polish and blue for waxing? what one would you use for oxidation removal? thanks!!
@SportfishingBoats
4 жыл бұрын
Jerry White for Oxidation removal. Green/blue for polish. Good luck with it!
@Jerry-xx8dx
4 жыл бұрын
@@SportfishingBoats so polish and wax pads are interchangeable?
@SportfishingBoats
4 жыл бұрын
Jerry No sir. Wax pads are usually black foam for machine. I hand wax on the inside and sometimes use a dual action on hull sides. To keep it simple, I would recommend just hand waxing.
@eddieandreu8398
3 жыл бұрын
Brian i Have the same makita that you have also with the same 3m quick connector and I want to know wish pad would you recommend me that works good to remove oxidation and also for polishing do you have a part number? Also i use my makita for removing oxidation on #2 and for polishing on #3 what would you recommend me? Thanks!!!
@SportfishingBoats
3 жыл бұрын
Presta White 890082wd. And green890085wd. Presta suggests 1800rpm for compounding( 1 or 2 clicks above 3 on dial.). Polishing 1400rpm(1 click before 3).
@eddieandreu8398
3 жыл бұрын
@@SportfishingBoats Ok perfect thank you so much!! for the info i really appreciated.
@bigmeaney555
3 жыл бұрын
I know I'm a little late to the party, but can I use the same type of pad used for polishing to apply a polymer sealant after polishing or do you recommend a different one?
@SportfishingBoats
3 жыл бұрын
Just to keep it simple, I recommend applying waxes or sealants by hand for diy use. There isn’t much speed advantage and by the time you have figured out the set up and idiosyncrasies of the particular product in machine application you probably could have done the boat twice by hand. Just my thoughts.
@pittwr
4 жыл бұрын
Greeting, which backing plate do you use for your Makita? Thx, Bill Sherman, Ct
@SportfishingBoats
4 жыл бұрын
The one out of the box works good on flat surfaces like hull sides. I prefer the Presta backing plate on the in side of the boat.
@pittwr
4 жыл бұрын
Sportfishing Boats thank you!
@SportfishingBoats
4 жыл бұрын
Your welcome. Good luck with it!
@saulcovarrubias9010
2 жыл бұрын
I don’t have a rotary polisher are there any wool pads or foam pads you can recommend for a DA polisher
@JerryEHamby
Жыл бұрын
What's the best compounds
@foggybottombbq1916
2 жыл бұрын
Hey Brian. Could you share a link to the proper 3M coupler? Is it the 5/8 thread one? Thanks!
@timothyarmstrong5987
3 жыл бұрын
Great info, What advice can you give on tools for buffing and polishing the gelcoat in tight locations like the cockpit of a sailboat?
@SportfishingBoats
3 жыл бұрын
First remove any obstacle you can. For tight areas and around fixtures you can’t remove, turn the speed dial down to 1000 rpms or less and have patience. I don’t use anything other than a Makita 9237.
@SportfishingBoats
3 жыл бұрын
Btw, sailboats are obstacle course for a buffer....🤨🤨🤨
@Adesico87
4 жыл бұрын
Cleaning wool pads... use the spur tool between jobs? Only use the spur tool? Or throw in washing machine? If so, then what soap?
@SportfishingBoats
4 жыл бұрын
All good questions I need to include in video. A spur is handy. You can soak in bucket with dish soap as well. I don’t use more than a quart of compound or polish per pad. So I usually finish the project and throw the old one out. Fresh pads make a huge difference.
@teakayh
4 жыл бұрын
Brian - great videos - thanks - I recently got a Presta black wool cutting pad as white pad were sold out - I have a normal not heavily oxidized 22 ft boat - should I return the black cutting pad for the white cutting pad? I also got the Presta Blue pad for polishing but the package says the green is better for regular polishing and Blue for final polishing for swirl removal - any advice? I am planning on using the Presta Super cut compound and the Presta ultra polish for the first two steps. Thanks again
@SportfishingBoats
4 жыл бұрын
teakayh All good questions. Keep the black pad it will be fine. The blue will be fine as well. In the end it’s a boat not a exotic car going to a show. You’ll get good results with those. The differences in those pads is negligible.
@iansacks986
4 жыл бұрын
You mention the last step of waxing but is that done with a polishing pad or should be done by hand? A video on just waxing would be great. Thanks!
@SportfishingBoats
4 жыл бұрын
Ian, your right, I need to make one. With Farleca you can do it by hand so fast, I would say just do that way. Farleca is so simple to use. I love that stuff.
@DavidGarcia-qx6dd
3 жыл бұрын
What is better the white pad or the black and white
@SportfishingBoats
3 жыл бұрын
White
@kcthomasma
4 жыл бұрын
What would you use on an aluminum boat or pontoons to polish the aluminum? Great videos btw!
@SportfishingBoats
4 жыл бұрын
Kenneth Thomasma unfortunately I don’t know what to recommend. I have zero experience with them. Sorry I’m not of more help.
@gregjohnson7260
Жыл бұрын
I'm planning on doing a job on my searay..Do I need a separate wax pad as well??
@timtaylor2955
4 жыл бұрын
Would you use these same pads to do an Rv. When you use the polishing pad are also using a polishing compound. I'm new to this so sorry for sounding lost.
@SportfishingBoats
4 жыл бұрын
tim taylor Yes, if it has gelcoat it will work just the same. Check out “buffing and waxing to remove gelcoat oxidation” video on this channel. I think that will help answer a lot of your questions. Brian
@jackjenerou5246
4 жыл бұрын
What are your thoughts on ceramic coatings? Have you done a video on them? Is there a brand that you recommend that the public can purchase? Lastly what steps should I do with my non-skid surfaces on the deck of my boat?
@SportfishingBoats
4 жыл бұрын
I do not use or recommend ceramic. I definitely would not recommend DIY it either. Check out the video on my channel “preventing gel coat oxidation”.
@SportfishingBoats
4 жыл бұрын
Sometimes I buff the nonskid just like the rest of the gelcoat with an old pad. Just depends on type of nonskid. Whatever you do.... Do not wax it... it will be SLICK.
@jackjenerou5246
4 жыл бұрын
@@SportfishingBoats The boat is a 1995 370 Sea Ray so the non skid isn't super aggressive like say on a Tiara. But I want to keep it clean and prevent it from oxidizing. What products or steps do you recommend on Non skid to clean it and maintain it? Or what steps?
@SportfishingBoats
4 жыл бұрын
Jack Jenerou use an old pad and slow the speed down some on the buffer and compound and polish it just like the gel coat on the rest of the boat. Just don’t wax it. Magic erasers are VERY helpful when cleaning😉
@jaredzeno
3 жыл бұрын
Question: I did a heavy cut last season. I just want to bring it back from the year of use and protect it with wax. Would a one step medium cut/wax from 3M work for that application? thanks! also im going to buy that Makita!
@SportfishingBoats
3 жыл бұрын
Check out my video preventing gel coat oxidation. This is what you want to be doing to maintain once all the oxidation is removed. Yes, the Makita is bulletproof.
@huffzz1
3 жыл бұрын
So how many pads do you think would be required to do a 23 foot boat?
@marktingle7207
4 жыл бұрын
Brian, new boat owner...I have a buffer and a wool pad, just wondering what speed should I be running the buffer at if I am using a oxidation remover compound? I am enjoying the videos...well done.
@SportfishingBoats
4 жыл бұрын
Which brand of buffer and compound are you using? Brian
@marktingle7207
4 жыл бұрын
Sportfishing Boats Dewalt and 3M light 2+W
@SportfishingBoats
4 жыл бұрын
I don’t use a dewalt so I don’t know the exact number setting on the dial, but 1500-1800rpms. The 3M or any profit that contains wax creates problems as the wax will hide the oxidation as you buff making it difficult to know if you have removed the oxidation. That product is also more of a Polish then compound. Not aggressive enough to remove anything other than light oxidation.
@SportfishingBoats
4 жыл бұрын
Unfortunately...
@joecortese3389
3 жыл бұрын
Hi Brian. Great videos, I have gold colored rod holders/rocket launcher, I believe they are anodized aluminum but not sure. They have gotten cloudy with what looks like water spots. So I want to shine them up. I tried Flitz a couple of times this weekend with no luck. Have you come across these and what would you use to restore the shine?
@SportfishingBoats
3 жыл бұрын
Joseph, hmm... not familiar with what your describing. You have to be cautious with anodized aluminum not to hurt the anodizing. First thing I would do is make sure you have anodizing and not another finish on aluminum or possibly bronze.
@bencox7439
4 жыл бұрын
Hey man thanks for the video. I am currently using a DeWalt rotary buffer and I cannot get the gel coat looking good. I am very familiar with automotive paint. I am using the 3m medium and light gel coat compounds with the meguires heavy cutting pad. I have also tried the makita wool pad. I’m at a loss. I even tried wet sanding the oxidation and buffed it out. There is always light scratches remaining and some haze. I have a 2015 Yamaha AR 240 and the gel coat is grey.
@SportfishingBoats
4 жыл бұрын
Okay. Here is a key thing to know if you have experience with automotive paint. Something very aggressive on car paint Is only medium aggressive on gelcoat. You have 20mils of gelcoat and 2 mils of paint. 3M is a nice product in an auto body shop. It’s not so good on a boat particularly outside. There are just a few compounds made that really perform well on gel coat. Presta Supercut is darn good. I can’t remember using a Meguiars pad. I can tell you the Makita pad is seriously lacking. I use Presta, but a 3M 5711 is a nice pad.
@bencox7439
4 жыл бұрын
Sportfishing Boats thanks for the information. What are your thoughts on the battery powered DeWalt Battery Powered rotary buffer compared to the corded one.
@SportfishingBoats
4 жыл бұрын
Ben Cox Corded is what you want for numerous reasons.
@bencox7439
4 жыл бұрын
Sportfishing Boats thanks for the great advice. I purchased everything you recommended. The cutting compound and black pad are amazing. I want to send you a pic. I have one question and I should be good to go! Thanks again. As I am cutting the shine is coming through, but when I look close with a light there are some dull areas still.
@SportfishingBoats
4 жыл бұрын
@@bencox7439 Compound it again. With Gelcoat you can apply more pressure to the pad than you would with auto paint. Try that and see what happens. 1800rpms works well.
@ddbarrsd
3 жыл бұрын
Did you have to change the backing plate on the Makita to use the Presta pads?
@SportfishingBoats
3 жыл бұрын
No, Makita will work albiet I do like Presta backing plate better.
@NoBs48
3 жыл бұрын
I’m about to get the oxidation off my new boat but the oxidation is really bad I sanded down to 1000 but still doesn’t look like it’s helping. I don’t want to wastes my money I don’t know what to get so I’m googling and everyone uses different compounds ( smh) I don’t need it to be perfect. Any suggestions?
@SportfishingBoats
3 жыл бұрын
Presta Supercut.
@krakenautomation5979
4 жыл бұрын
What is the model #of the makita. there are several to pick from 9237c hook and loop etc.
@SportfishingBoats
4 жыл бұрын
Kraken Automation 9237 is the one you want. You can get it tool only(what I recommend) or as a kit version that includes two low quality pads and a bag.
@sccarguy
4 жыл бұрын
How many of each pad do you go through to complete a job ,for instance a 19 foot jet boat.. I know you can wash and reuse .
@SportfishingBoats
4 жыл бұрын
Good question. 1 pad per quart of compound or polish. The pads get dull, resulting in rebuffing areas and using more compound or polish. Which doesn’t save money or your shoulders! Pads make HUGE difference. Buy good ones.
@richieallen5131
3 жыл бұрын
Hey Brian, it’s Richie from MD again. I went ahead and purchased the Makita. It has a setting from 1-6. Question: what setting should I have it on for compounding, and what setting should I have it on for polishing?
@SportfishingBoats
3 жыл бұрын
You’ll see a guide on side of machine that indicates which numbers correspond with each rpm. 1800 rpm compound, 1400 for polish. That means one or two clicks past “3” on dial for compound and one click before 3 for polish. However, it’s totally fine to go a little slower compounding the first section until you get the hang of it😉
@ro-cl2do
4 жыл бұрын
What Polisher and pads would you recommend for RV that has a clear coat finish. In somes places the clear coat is flaking off. ( 20 years old) There are areas that are painted and then areas that are white. But everything is clear coated, except the roof. Appreciate any advice you could provide me.
@SportfishingBoats
4 жыл бұрын
If it doesn’t float- I don’t know much! I would be completely guessing on what to recommend since it sounds like you have a painted RV. Sorry, I’m not familiar enough to help. Brian
@ro-cl2do
4 жыл бұрын
@@SportfishingBoats I just thought since it was all fiber glass/gel coat with only some surfaces having paint it would be pretty similar to boats. The roof for example is all white, just gel coat to my knowledge and no clear coat. Thanks very much for replying, Roger
@SportfishingBoats
4 жыл бұрын
ro32901 Roger, on any surfaces that are gelcoat this will work exactly the same as a boat. Unfortunately, without seeing it in person I wouldn’t want to offer advice on something I’m not familiar with. Thanks for watching! Brian
@ro-cl2do
4 жыл бұрын
@@SportfishingBoats I understand, thanks.
@ro-cl2do
4 жыл бұрын
One last question, when I look for a Makita 9237 I only find a 9237C is that the correct model #?
@Nextlevelmarine
3 жыл бұрын
What would you recommend to remove the holograms and swirls left behind from the wool pad on the rotary buffer?
@SportfishingBoats
3 жыл бұрын
Polish with the synthetic pad(presta green)and keep the pad flat against surface you won’t have swirls on gel coat.
@Nextlevelmarine
3 жыл бұрын
@@SportfishingBoats No holograms either?
@SportfishingBoats
3 жыл бұрын
@@Nextlevelmarine no!😁
@rgg8450
3 жыл бұрын
What diameter polisher and pads are those? The makita specifically. Appreciate it
@SportfishingBoats
3 жыл бұрын
7inch pads. Sometimes referred to as 8’s or 9’s. They are all the same size though🤷♂️
@jlauby7777
5 жыл бұрын
Are you saying my Flex polisher won’t have enough power to remove oxidation? John from OBX
@SportfishingBoats
5 жыл бұрын
Your Flex may be okay. Its a beast of DA polisher. Im not familiar with the pads available for that machine.
Пікірлер: 289