Thanks for Watching Everyone! Shoutouts to some of the vehicles featured in this video and links to vendor websites are included in the Description.
@jaywhi20
8 ай бұрын
Unless the MOPAR police start issuing tickets, trust and believe I’m getting a Hellcat hood for my ‘23 Scat!!! It’s the look, could care less about those who look down on it.
@CTHellcat
8 ай бұрын
Nothin wrong with installing higher trim level body parts. I have a hellcat hood on my RT. 😁👍.
@Incrediblewash
Жыл бұрын
Bruh I’m trying to get a cowl hood but I can’t find any place that makes some.
@CTHellcat
Жыл бұрын
This is probably the best cowl induction hood available for the 2015 and later chargers. www.americanmuscle.com/charger-dem-style-ram-air-hood-unpainted-dc15ahdemfhw.html?Exterior%20-%20Hood%7CStore%20Brand&T5_Var4=CR9228&T5_Var2=shopping&AMH+Charger+Vehicle+Medium+LTVMiddle&intl=0&dialogtech=ppc&gclid=CjwKCAiAxP2eBhBiEiwA5puhNaFkX3G3qeu5vhRdNxRoBXCjS8Bm8SvoSid1f0a9aQgdlAEt2VU-RRoCBNcQAvD_BwE&gclsrc=aw.ds
@mariasemeraro9125
2 жыл бұрын
Hi I Have an SXT and I was thinking to swap with a 392 or hellcat. Which one would you recommend ? Does the Amerihood same quality as Mopar ? I am assuming a body shop would know about windshield squirter? I am new in the area so I am not sure where to take it, a body shop or shoud I look for a specific shop that does mods, and finally can I swap the insulator pad from old to new! Thank you so much!
@CTHellcat
2 жыл бұрын
I'd recommend the 392 hood because it does better controlling water. Wherever you bring it, remind them about the squirters. You will NOT be able to reuse the insulator pad.
@islandRT
Жыл бұрын
the challenger redeye hood for the charger looks insane i might have to get that
@CTHellcat
Жыл бұрын
Yeah that's a good one. I've seen a few in person and the look pretty awesome.
@Indigeaux797
4 жыл бұрын
Most informative hood guide I've seen to date. Great job.
@CTHellcat
4 жыл бұрын
Thanks man! Glad you enjoyed it.
@Classicmoderndodgefan
9 ай бұрын
The demon hood
@CTHellcat
9 ай бұрын
👍👍
@Alphaking85
Жыл бұрын
I have a 15 rt can I upgrade to any one of those?
@CTHellcat
Жыл бұрын
Yep! Any of these hoods will work.
@amirtv2479
2 жыл бұрын
Thanks
@CTHellcat
2 жыл бұрын
Sure! Which one you gonna get?
@chucknostaw2819
4 жыл бұрын
Great video. Awesome info. Thanks man 🙌🏿💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
@CTHellcat
4 жыл бұрын
Glad you enjoyed it and thanks for all your support on both IG and KZitem. 🙏🙏
@chucknostaw2819
4 жыл бұрын
@@CTHellcat no problem yw
@srt_ov3rlord
3 жыл бұрын
Get the demon hood!
@ynrt_5.772
2 жыл бұрын
Good vid great info....I'm liking the redeye hood from vicrez it's a little expensive but I think it's the hood for my R/T.....do you have to have hood pins for a fiberglass hood such as amerihood....appreciate the info good vid subbed 👍🏼
@CTHellcat
2 жыл бұрын
Thanks man, and I appreciate the sub. I haven't had to use hood pins on my fiberglass viper hood from trufiber. The thing fit perfectly and I've had the car up to 170 and have taken it on road courses several times. I think you should see how the fitment is after installation then make the call on pins. (Which I actually think look pretty cool). Enjoy the Red-eye hood, should look badass. Also, if you're on Instagram, send me some pics after the install - @CTHellcat
@filaHemilife
4 жыл бұрын
I think a shaker for the Hellcat would be awesome imo
@CTHellcat
4 жыл бұрын
A shaker option would be pretty cool. Thanks Fila!
@rongause2846
3 жыл бұрын
Good information but couldn’t find the charger red eye hood
Very informative thanks ! I’ll be going for the Viper hood
@CTHellcat
2 жыл бұрын
Nice! That's what I have and I love it.
@riology2234
3 жыл бұрын
can anyone confirm if the BMC products are in fact made outside of the US? I was about to get a CF hood from them, yet I may go another route if that's the case.
@CTHellcat
3 жыл бұрын
I'm not sure myself. Maybe reach out to BMC? They sell a lot of hoods and some could be made domestically and some internationally
@speakonit3
3 жыл бұрын
Thanks for the info!! Have a 2018 Charger GT. What do you recommend?
@CTHellcat
3 жыл бұрын
If I were buying a new hood, I'd go with the demon hood.
@RIVER-RATT
4 жыл бұрын
Great information and video 👊🏼
@CTHellcat
4 жыл бұрын
Thanks Man - Hope it was helpful.
@CmcMods
4 жыл бұрын
I had the SRT hood for 10 years I love it took it off my last charger and put it on the current one I have now I haven't changed it because they only thing I have left from my last car besides pics.
@CTHellcat
4 жыл бұрын
I did the same with my RT - took off a bunch of stuff and put it on the hellcat. It's awesome being able to carry mods forward like that!
@leosanders3784
4 жыл бұрын
Great 911 ,long time I was worried about water into those Hellcat hoods they are my favorite but was thinking about getting the 393 hood,but the American hood is fiberglass not a fan of fiberglass.what's your opinion on the 392 mopar hood? This was the best 911 on these hoods I've seem.been looking at these hoods for a while &this help me ! Thanks also been looking at the srt conversion kit & haven't got enough info on that.never know some one would buy a Hellcat & water didn't drain out of the hood ,course it's a $ issue for me.don't have that kind of $.LOL I just want fully functional ram air ,cold air intake,& the new 2019 grille with the air set!Also a 80 MM throttle body !
@CTHellcat
4 жыл бұрын
Thanks! I did the snorkel grill swap on my 2016 hellcat, which I have a video of on this channel. The Mopar 392 hood doesn't have a ram air option. None of the Mopar hoods do for that matter. If you want ram air, you'll have to go with fiberglass or carbon fiber ($$$)
@pdiz
3 жыл бұрын
That visual at 5:09, tho! Daaaaammmmnnn...
@CTHellcat
3 жыл бұрын
Yeah man, those demon hoods are badass.
@robertjames6719
3 жыл бұрын
I got the viper hood and yours looks alot better than mine,drivers side has a bow,got any suggestions?
@CTHellcat
3 жыл бұрын
Did you buy it new? If so, have you contacted the vendor? If the vendor won't replace it, then you may have to go to a body shop and see what they can do.
@robertjames6719
3 жыл бұрын
@@CTHellcat yea,i bought it from Carid,paid 1600 dollars for it,took it to a body shop to get it painted and installed and seen that the drivers side bowed up in the middle,but reached out to them,nothing yet,thanks for the info,my names Robbie by the way and nice ride u got man.
@CTHellcat
3 жыл бұрын
@@robertjames6719 thanks bro. Good luck with the hood.
@Tiugh
4 жыл бұрын
Danko Reproductions supposedly have a Shaker Kit listed on their 2015 and Up Charger page. I haven't checked with them yet to see if they are still offering it or not. Been thinking about it though. It would be something different. Requires cutting existing good.
@CTHellcat
4 жыл бұрын
I just looked at their website and its kinda confusing as to what exactly they're offering for gen 3 chargers, and which of the gen 3 trim levels it will or won't fit. But it does appear to be a highly customized option where you cut into the factory hood. Thanks!
@RTLife
4 жыл бұрын
I'm def liking that new Redeye hood - good info on getting a new hood!
@CTHellcat
4 жыл бұрын
I gotta see one in person before I can cast final judgement. I really don't like the way the vents slope back so much, but maybe the Pics distort the view.
@RTLife
4 жыл бұрын
@@CTHellcat pictures don't do it justice in most cases - that is what I have learned about many visual upgrades.
@hemichallenger3643
4 жыл бұрын
I’m a shaker guy. I think it would look insane on a Charger. I like my 2 door, but I would be tempted.
@CTHellcat
4 жыл бұрын
I think there may be some highly customized kits available, but it requires cutting in to your stock hood. 😬
@andrewscatpack3128
4 жыл бұрын
Nice hood selections and learning experience. I don't know about water able to enter the engine bay. Thanks for sharing
@CTHellcat
4 жыл бұрын
No problem man. Glad it was helpful.
@riserrns5093
3 жыл бұрын
Thank you so much for the info
@CTHellcat
3 жыл бұрын
You're very welcome!
@p71josh
4 жыл бұрын
I’m digging my 392 hood, but would get the hellcat hood if I decided to upgrade. Great video Scotty!
@CTHellcat
4 жыл бұрын
Thanks bro. I have the mopar hellcat hood on my RT now and the water issue is really a pain in the butt. Just dirties up the entire engine bay. If I was to get a new one, I'd probably get the Amerihood option.
@319speed
4 жыл бұрын
My stock 392 hood on my Daytona was fully functional. It brought air to the intake.
@CTHellcat
4 жыл бұрын
What's up K! I wonder if this might be an option of some sort, because @lb3711's 2017 Daytona vent opens right into the engine bay.
@CTHellcat
4 жыл бұрын
Closest thing I could find is for the Challenger TA, but I can't find anything like this for chargers. moparonlineparts.com/mobile/dodge-challenger-cold-intake-p-8354.html
@gregarellano4499
3 жыл бұрын
Thanks for the video , Ive been looking at the Demon hood. im gonna check out Amerihood!
@CTHellcat
3 жыл бұрын
Yeah that's a really nice hood! Thanks for watching!
@OuzoLouGarage
4 жыл бұрын
Great info on hood buying guide ..
@CTHellcat
4 жыл бұрын
Thanks brotha.
@daytona5.722
4 жыл бұрын
Nice job Scottie! Very comprehensive guide to hood selections.
@CTHellcat
4 жыл бұрын
Thanks man - Very cool how many options are out there now. When I got my viper hood, it was pretty much the only thing out there that wasn't a factory option.
@aaronferguson47
4 жыл бұрын
What hood would you recommend for a rt with hellcat supercharger installed?
@CTHellcat
4 жыл бұрын
All of the hoods with a center air intake should work. If I had to start from scratch, I'd go with demon hood.
@aaronferguson47
4 жыл бұрын
@@CTHellcat ok thanks from amerihood or bmc?
@CTHellcat
4 жыл бұрын
@@aaronferguson47 BMC
@aaronferguson47
4 жыл бұрын
@@CTHellcat thanks
@b5beast611
4 жыл бұрын
My favorite is the the Demon hood. I really like the look of that one. Great hood guide 👍
@CTHellcat
4 жыл бұрын
Yeah, if it had been around when I got the viper hood, I probably would have gone with it.
@b5beast611
4 жыл бұрын
CTHellcat I’m tempted to put one on my Daytona.
@MDG_Collections
4 жыл бұрын
Great info Scottie!
@CTHellcat
4 жыл бұрын
Thanks Mike. Appreciate you swinging by the channel.
@knightfyrrt4740
4 жыл бұрын
Great video as always. Love the channel. I own the killer bee hood and I def agree with the water issue. Also noticed the uv from the sun hits a lot of the plastic parts in the motor compartment ( I use a UV style protector when I clean ) but to alleviate the intake issue I installed the functional hell cat snorkel grille ( no water issues ).
@CTHellcat
4 жыл бұрын
Thanks for the feedback bro! I realized after posting the video that your car was actually on the BMC website, so I put a shoutout to you in the description.
@knightfyrrt4740
4 жыл бұрын
It’s all good bro. Thank you.
@hemichallenger3643
4 жыл бұрын
Dammit. What happened to my bell???? I just got a notification for this video!! Grrrr I re-belled.
@CTHellcat
4 жыл бұрын
I think KZitem been hiding bells from my subscribers for months, cause my views are goin nowhere. Thanks though bro, I appreciate it.
Пікірлер: 82