@7:20 That's got to be the best pyrate I've ever seen! 🤯
@ppp9126
Жыл бұрын
Great video. Thank you
@mikegrasley1993
Жыл бұрын
Nice to see someone posting videos relating to modern, wide beam, twin rudder boats!
@theboatcheat1204
Жыл бұрын
More to come!
@davidbalcombe423
Жыл бұрын
So very useful. Thank you!
@theboatcheat1204
Жыл бұрын
You're welcome!
@CasualRiders
11 ай бұрын
as someone from South Africa, Who understands Afrikaans, I REALLY appreciate the name of your boat 😊😊
@theboatcheat1204
11 ай бұрын
Thank you! It is the worst boat name ever though… I have to spell it phonetically every time, and then the recipient always thinks I’ve given up and re-started when I spell the second half of it! We were at Tan Malie Se Winkel’s in Hartebeesport Dam, and when my sister-in-law translated the wooden sign we noticed as meaning ‘I can’t complain’ we decided to rename the house we were buying… decades later my daughter suggested it as the name for my first new boat, and we didn’t stop to think about the radio!
@WavedancerWesterlyfulmar
9 күн бұрын
I use bowline but snub on middle cleat on pontoon to stop forward movement then bring it to bow cleat tie off quick husband throws stern line, I tie off quick . He steps off and does final tie off and spring lines
@kgson8311
Жыл бұрын
Just want to say great video, love your content and simple explanation of the physics. My new favourite KZitem channel. Keep the content coming 👍
@theboatcheat1204
Жыл бұрын
Thank you that’s really kind!
@svgenie3295
Жыл бұрын
Spring is King 👍🏻🇨🇦😎
@valeriomarinelli5033
4 ай бұрын
Great thank you from Italy😊
@sailingonadream
Жыл бұрын
You have missed the best cheat of all, the single handed sailors go to for easy mooring in any conditions... run a line from the center cleat, outside everything, to a winch in the cockpit. Leave a lot of slack in the line. Approach the mooring and when the cockpit is parallel with the cleat you would use for a stern line, drop the line over the cleat and pull in the slack on the winch. Now you can motor forward and the line automatically becomes a stern line and spring, all without leaving the cockpit. The boat is made and you can step off and do your lines at leisure. This can also be done the other way round, drop the line over a cleat youwould use for a midship line and pop the engine in reverse, hey presto a midship line and spring in one. If the engine should fail, just winch in all the slack and you are along side as well. I have been living on board and sailing solo for 18 months now and this is my go to method for completely trouble free mooring. So much so, if people offer to take my lines I politely decline now, or just ask them to take the bow line. This is IMHO the safest way to come alongside in all conditions and has saved me many a blush in marinas.
@theboatcheat1204
Жыл бұрын
A tried and trusted method as you say… and there are so many variations on this for different situations.
@theboatcheat1204
Жыл бұрын
… and it doesn’t work in a twin rudder boat because of the lack of propwash.
@sailingonadream
Жыл бұрын
@@theboatcheat1204 I'm not convinced, I dont need to do anything with the rudder, once its set as a stern line and spring, idle forward and the bow comes in to the pontoon but only as far as the stern line will allow, she will sit there all day with the bow in slightly. If the bow is pointing in too far, just winch the line tighter. Although I will admit, as you get more confident with this method, you learn to loop the line round the cleat, instead of just dropping it over. This adds a little more friction. You would only need steerage, if you were set with just a midship line, but with a stern and spring, the lines do all the work for you.
@theboatcheat1204
Жыл бұрын
A modern broad transom twin rudder boat, with a line from the mid cleat, will go bow in and stern out if you put it in forward gear, whereas a traditional boat can be controlled with rudder to make the bow or stern move in. Stepping off of a SO349 for example, to attach a stern line would not be possible.
@nichesound
Жыл бұрын
I have boated for 30 years in the Pacific NW...Mid Cleat ALWAYS....have a beer chase your girl or just admire the fact it isn't going anywhere!! Johnne in Clallam Bay WA.
@captaindave8683
9 ай бұрын
Very nice explanation
@ajmalmian3653
Жыл бұрын
Thanks. Rare to find advocate of midship cleat when docking.It is the easiest line to cleat first.
@petermathioudakis2110
Ай бұрын
Thank you
@johnpierre8931
Жыл бұрын
mid-sheet cleat is the way to go. the only downside is you need to leave the helm while single handing, but if you get good at stopping the boat when you dock it is not a problem.
@konjarek
8 ай бұрын
3:25 if rudder is placed more to front than rope, try to turn rudder left, not right. Right rudder pushes hull away from harbour. Left rudder will push hull to the harbour. Still most of engine power is directed to the front, so it will cause turning hull to the right, especially if You'll make moore longer.
@sailingsibongile
3 ай бұрын
How many docks in Poole have the circumstances, where the current is perpendicular to the dock? On the Solent area (Hamble, Itchen, etc), I can only think of two. And in Portland, Weymouth, Torbay, there are none that I can think of. The scenario is pretty rare... and depending on the wind strength the ferry-gliding at 8:02 might not be possible at that angle. Also, I'd approach the dock as you show at 0:45 and then have a line ready as you show at 7:30, but I'd rig the bitter end around a winch, so you can take up the slack really swiftly, and you don't have to see-saw quite as much. On my boat, I'd possible I'd also approach it from the other side, so I can use the prop-walk to control the stern when I go astern after getting the line on the cleat (I have a RH prop, so on a LH prop this demo would be he correct approach).
@theboatcheat1204
3 ай бұрын
In Parkstone the tide floods across the marina into Parkstone Bay, so when the tide is flowing most of the berths have a current perpendicular to the finger. In Cowes and East Cowes about 1/2 of them do.
@toroddlnning6806
Жыл бұрын
if i was solosailing I would come in directly from west and rund to the front and crash into the dock with as litle speed as possible and tie the front firs. then go back in the boat and pick up the rope from the back and go back on the dock and pull in the back.
@everstormz
Жыл бұрын
One option I think worth considering is to tie the bow, turn to port, and engage forward. That would bring the stern to the dock.
@theboatcheat1204
Жыл бұрын
On some boats yes, but on most yachts it doesn’t work because there is insufficient propwash and the geometry of the hull shape makes getting the stern in almost impossible. For twin keel boat this won’t ever work… but the mid will work on all boats.
@AN-kg4ei
Жыл бұрын
how about a looped line tied both bow and stern and then tied close to the middle. This works well also solo launching as it keeps boat in line with dock...
@ppp9126
Жыл бұрын
It could be great to see your hints also for leaving against wind in a monohull single engine 😊
@theboatcheat1204
Жыл бұрын
Ask and it shall be done! Watch this space …
@ppp9126
Жыл бұрын
@@theboatcheat1204 faithful waiting 😆
@theboatcheat1204
Жыл бұрын
@@ppp9126 It is up!
@bigglyguy8429
Жыл бұрын
@@theboatcheat1204 Thanks!
@christopherthien9567
3 жыл бұрын
In the final scenario with the bowline through the midship cleat and running back to the starboard aft cleat, Rather than oxo to the starboard aft cleat, what about using the winch that is there. This allows you to shorten the line by just winching in.
@theboatcheat1204
3 жыл бұрын
it would indeed - but on many boats the mooring lines are too big to be workable on a winch. If they are not it is a great plan. Also, if windage cause the bow or stern to move in, winching will not solve this, while moving forwards allows steerage and the ability to control the orientation of the boat... but again if it works it is a great idea...
@kenlee-97
3 жыл бұрын
Probably too complicated for the inexperienced person, but for a competent skipper than yes.
@captainsukycannon1167
3 жыл бұрын
Quite good
@ssk3940
2 жыл бұрын
What about using a bow spring and powering against it using propwash to pin the stern to the jetty. This has worked well for me in the past in 15kt to 20kt side winds. Of course this only works on single rudder boats.
@theboatcheat1204
2 жыл бұрын
I agree it works… but not even on all all single-rudder boats… and a bow spring is harder to set than a mid-line because you can lean against the shrouds while lassoing or placing a mid-line, and the shrouds don’t pitch anywhere near as much as the bow on any wash. That said, there are loads of ways of doing most things in boating, and if it works for you it’s correct!
@albatross5466
Жыл бұрын
I have used this exact technique when leaving a dock that I am being pressed onto. I use the bow spring and prop wash to push the stern off and then back down clear of the dock. Granted I am usually travelling with at least one crew.
@petermathioudakis2110
Ай бұрын
There is .2 knt of current
@thomasmartin9078
Жыл бұрын
Whats the best approach if you dont have amidship cleats?
@theboatcheat1204
Жыл бұрын
Great question! I think I would fit a mid-cleat! What sort of boat do you have? Some options are type-dependent…
@thomasmartin9078
Жыл бұрын
@@theboatcheat1204 I just upgraded from a 24ft racer cruiser to a 34ft Jeanneau melody. The 24fter didnt really need amid ship cleats, the 34fter however is fitted with way undersized amid ship cleats and I dont really trust putting all the load on them. Havent got around to replacing them yet but a job I must get to soon. Time to browse the boatscrapyard me thinks.
@todddunn945
Жыл бұрын
You can always tie the midships line off the a shroud at deck level.
@theboatcheat1204
Жыл бұрын
There is an alternative, but it is more of a faff than using the shrouds at deck level. It would be useful if you aren’t crazy on tying off on the shrouds - I will do a video on this in the next week or so…
@marz5715
10 ай бұрын
eee.... bow spring line + steer left+ engine forward, maybe?
@petermathioudakis2110
Ай бұрын
Docking stern to, berth is on starboard, at the end of berth there is a perpendicular concrete wall with steel structure . Backing up with prevailing wind on bow , I can be blown on or blown off the berth and pushed every time on the wall. I am single handed most of the time .! 😮 Have you got a cheat for this situation That can stop the boat and push me on to the berth. Peter
@theboatcheat1204
Ай бұрын
@@petermathioudakis2110 Hi Peter, just to make sure I understand correctly, are you mooring stern-to with lazy lines, piles, or on a finger berth? Also, when you enter the berth, is the wall behind the transom, so the wind pushes you too far in?
@petermathioudakis2110
Ай бұрын
Hello yes it is a finger pontoon with no mooring lines , and yes it is pushing me inn to concreate wall to close or very close to transom
@theboatcheat1204
Ай бұрын
@@petermathioudakis2110 Will have a think and put something together asap. Yacht, or power boat, and what sort of drive?
@petermathioudakis2110
Ай бұрын
@@theboatcheat1204 The boat is a Yatch With a sail drive with One rudder
@Jarek12010
9 күн бұрын
cherry picking easy scenarios - not good. Mid cleat line first is great, unfortunately, it has to be executed very fast and you have to have a cleat exactly where you can fit your boat. How about a scenario that did not seem to occur to you. A bow line and engine forward with rudder hard to port? This will hold the stern to the dock, to give you time for the rest of the lines.
@theboatcheat1204
8 күн бұрын
@@Jarek12010 Problem is that it won’t work with twin rudder boats.
Пікірлер: 60