NAILED IT! I've been soundproofing for a bit over 10 years and this is CORRECT info. I have actually come to Nashville from Houston to do it.
@soundproofyourstudio
Жыл бұрын
Thanks!
@paragraysarkar404
2 ай бұрын
Which one is best for sound proofing laminated or DGU ??
@sandybeansconqueso
Ай бұрын
great info thanks for making this video. Although the way you describe tempered glass makes it sound fragile. It’s extremely resilient as far as surface tension. just doing nick the edge when installing! then you will have glass crumbles to clean up
@palsheldon6520
2 жыл бұрын
Nice one... Resonant frequency of the pain of glass, use 2 different thicknesses.. excellnt ideas here. I know the CSIRO in Sydney recomended 3 different thicknesses when I built a studio on Willoughby rd... you'd look out the window at the bus stop below... silent. Also an angle is helpful if the window is large,,,, standing waves and all that
@soundproofyourstudio
2 жыл бұрын
Yeah pal, the angle is great for the window to the live room. Although by angling you reduce the air gap thus reducing some sound isolation, but the benefit is in getting less audio reflections as well as visual reflections from glare.
@ikealamp53
2 жыл бұрын
Watching vids like this it really reminds me how the building styles in North west Europe are the best in the world. I'm from Holland. Thick sand lime double outer walls with 10 cm of rockwool in between or thick concrete walls in apartment buildings. Also the inner walls are often concrete or sand lime or brick. The glass is mandatory double insulated pane. In scandanavia often even triple pane. Still in older building sound can still leak through unfortuneately. Need to airtight it.
@soundproofyourstudio
2 жыл бұрын
Amazing, you have soundproofing built in!
@blablablabla8064
Жыл бұрын
What about france and italy?
@wacustica
17 күн бұрын
Hi, thanks for your videos. I have a question: using the configuration of 3/8" tempered glass and 1/2" laminated glass, would you use the thicker laminated glass on the noisier side, which corresponds to the live room? Or how would you choose for a live room and a control room? Thanks.
@johnjakubowski2304
Жыл бұрын
Rock solid presentation!
@soundproofyourstudio
Жыл бұрын
Thanks
@MoonbeameSmith
Ай бұрын
What about angling the two panes?
@Max-cs1dn
11 ай бұрын
Wonderfully informative video. Really appreciate it I learnt quite a bit!
@soundproofyourstudio
11 ай бұрын
Great to hear!
@musicman1738
3 ай бұрын
Would like to ask. Thinking of installing laminated glass over the exterior outside of 2 windows. Would this work as well to soundproof, I would think?
@soundproofyourstudio
3 ай бұрын
Yes, keep thickness and air gap in mind too
@tobiasz2056
Жыл бұрын
Heya Wilson, another great vid! I especially like how you accounted for the weight of the glass. I've been ringing around to get myself some glass, and so far, all the window dudes are telling me that nothing beats double-glazed windows for sound purposes. I was gonna do your method (and probably still will), but I'm just curious as to your thoughts on this? I'm thinking about maybe doing double-glazing just on the outside wall (I have the double-wall system too) if I can get away with it without it being to expensive...
@soundproofyourstudio
Жыл бұрын
Hey Tobiaz! There comes a point were you know more about soundproofing than other professionals in their respective field. This has happened for you. While a double glazed window will help with sound in the average home it doesn't come close to the STC rating you can get using my method. Best of luck! Don't do the double glazing on the outside wall. You already will have a double glazed window technically with two panes of glass. Stick to what works and don't let some people tell you otherwise! Stay strong my dude!!
@tobiasz2056
Жыл бұрын
@@soundproofyourstudio Thanks so much, man. Really appreciate the quick feedback! And thanks for the advice - I'll be sticking with your tried-and-true method! Keep up the great work for all us muso/studio builders :)
@gregcorwin8316
Жыл бұрын
Very much enjoyed your video, and you presented some really good information, but since the three areas that need to address when sound blocking is mass, stiffness, and damping, and tempering glass does not change any of those characteristics, so why would tempered glass be a sound blocking improvement over annealed? Also, while laminated glass using PVB interlayer is the gold standard for blocking sound, another popular interlayer material is called SG or SentryGlas and it does not improve acoustic performance. Anyone looking for laminated glass for sound performance must be careful to specify PVB when ordering laminated glass. The formula for calculating the coincidence dip of glass is: frequency = 12500/glass thickness (mm). Although thicker glass is better at sound attenuation because of mass law, the coincidence dip frequency drops as glass gets thicker. While thicker glass is better at blocking sound, the coincidence dip frequency of thicker glass tends to move into the best frequencies for human audible response. This is where the advantage of using two different glass thicknesses of glass with different coincidence dip frequencies really makes a difference. Also very much agree that plastics, acrylic or polycarbonate, are really poor at blocking sound and are barely better than nothing at the cost.
@soundproofyourstudio
Жыл бұрын
Laminate and tempered are best at sound isolation. I don’t know the exact physics, but you can try annealed you just might not get the best results.
@gregcorwin8316
Жыл бұрын
@@soundproofyourstudio I agree with using laminated glass, but not sure why tempered would be an improvement over annealed acoustically. Laminated glass works because of the viscous or more pliable interlayer between the two glass lites results in a damping effect to the sound coming through the package. Tempered glass might have some effect on sound propagation because the tempering process results in glass that has a surface compression layer surrounding a central tension layer so there could be some effect on sound waves passing through the glass, but I can't imagine that there is significant improvement when compared with ordinary annealed glass of the same thickness. But I am very curious. Unfortunately I can't find any information on testing tempered glass compared with annealed in sound propagation studies, and while I do have a good bit of information on comparisons of IG units and laminated glass for sound attenuation, these only use annealed glass for the comparisons. I suspect that someone has tested tempered glass for sound performance, but I have never seen results (assuming they exist) as to the results of that testing.
@sirjudge5055
4 ай бұрын
Curious if using mostly glass (2 layers) for the walls in a, room inside of an existing room, scenario? would be a worthwhile build?
@soundproofyourstudio
4 ай бұрын
I wouldn’t recommend it
@bluetech2809
2 жыл бұрын
Coincidence effect - very interesting thanks for that. Quick question (not sure what the special lingo is for it), is there any benefit to lining the sides of the inner part (between the two panes of glass) with some sort of foam or other soft soundproofing materials? My theory is that it could absorb vibrations from/on the glass and therefore prevent even more sound transmission, but I'm honestly just making it up and have no idea if that makes scientific sense.
@soundproofyourstudio
2 жыл бұрын
Yes you are right on track. We used rockwool and fabric over it to essentially dampen the area inside the window. Henry also did a studio recently where he did rockwool and then a 1/4" acoustic panel that he lined the sides with. Rod Gervais recommends wrapped ridgid fiberglass over a continuous rubber seal along the top and bottom in the space between the double wall.
@faradiba.zakiyya
Жыл бұрын
Can i use laminated glass which have thickness 2.5” + 2.5” to make soundproof vocal booth ?
@soundproofyourstudio
Жыл бұрын
Yes that would be very thick.
@soundworksinc.8428
Жыл бұрын
Great info. I can't find 1/2" laminate glass locally. Will the combination of 3/8" tempered & 9/16" laminate be OK for a 24' x 36" window?
@soundproofyourstudio
Жыл бұрын
Yes it will
@soundworksinc.8428
Жыл бұрын
@@soundproofyourstudio Thanks a lot. Your videos are SO helpful...and you do a great job. Rock on.
@kwolitek4785
5 ай бұрын
So are clearsonic products trash for reducing sound substantially? Anyone? Particularly their vocal booths?
@soundproofyourstudio
5 ай бұрын
I’m not familiar with them
@mollyliz.236
9 ай бұрын
Is polycarbonate glass able to be used as soundproof?
@soundproofyourstudio
9 ай бұрын
I’m not sure. I recommend laminate and tempered
@DJURBANBG
4 ай бұрын
ofc it is, you just have to use thicker pieces
@plasmichoneytrip
Жыл бұрын
Is laminate glass same as “double glazing”? Or is double glazing better using two separate laminate glasses?
@soundproofyourstudio
Жыл бұрын
it is not the same. Double glazing refers to two layers of glass with an air gap. Laminate glass is the way the glass is made. So you could have a double glaze window with two panes of laminate glass, which is what I recommend.
@EyelezzOfficial
6 ай бұрын
Ok so as a glass professional I need to correct you on a few things. Tempered is the STRONGEST of all the mentioned glasses, it’s not weak at all, it has a weak point on the edge of the glass, and yes if you tap its Achilles heel it will break, but I can slap a piece of 1/4 tempered with a hammer and it will not break. So really the only downside to tempered is it blows up when it does break. Next Plexi glass (plastic) is much more expensive than annealed glass, about the same as tempered. Essentially Plexi glass is a horrible product, looks like shit, it flexes, it breaks, and it’s expensive. Otherwise pretty good video.
@soundproofyourstudio
6 ай бұрын
Oh good to know. Thanks for sharing
@69sound81
Жыл бұрын
Here my very basic but broken down input. You have to consider the next when it comes to soundproof: Mass Critical frequency or ressonance frequency Air space De-coupling of srructures. So. Mass is always your friend and air space is always your friend. Think about it this way: if you talk to someone across an empty field the sound of your voice becomes more and more muted as the distance (air space) increases. It has a reason, but we will leave it there. Mass and a fisical barrier always helps. It is not the same to talk to someone 6 ft away with no obstruction than it is to do it with a car in between (even in perfect conditions, it creates a reflection barrier). The frequency thing is too complex to say it in some other way, we will leave it as it is just sayin that in fact, different materials have differen frequencies and that combination helps. Now, de coupling is the last and final one... a conected structure is able to transfer energy along its mass. It doesn't matter if it is acoustic energy, kinetic energy, caloric energy or electrical energy, it can and will transfer some of it. So, the very basic, arcaic (and complex) idea of building a room inside a room is to decouple most of the structure and leave the floor as the only conection point because it cant be effectively decoupled, but it also has direct contact to the earth, which has a lot of mass, materials and ways to disipate the energy. So, if you build a heavy structure of certain materials inside a heavy structure of different materials, with no direct air conections between the interior and the exterior and you leave a significant air gap between both structures with the floor being the only point of conection, you are on the right direction. The material selection and characteristics is other thing. It depends on the ability to block and or absorb and retain acoustic energy of each one. Wood, cardboard, polimers, glass, stone, steel, aluminium, textiles, leather, paper, plastics... they all have different acoustic properties. Glass resonates quite easily with sound, so it needs to compensate with mass. Soft plastics like rubber are amazing, but they retain a lot of heat and don't function well for structural purposes. Finally think about reflexions. You want to reflect sound from the outside but you want to disipate sound on the inside in a studio. And... I didn't hear a thing about policarbonate. I guess it is way to expensive and way to bad if you didn't mention it, but I would like to know if you have something to say about it.
@soundproofyourstudio
Жыл бұрын
Thanks for sharing. I don’t know anything about polycarbonate
Пікірлер: 44