Sheet cork is less expensive but offers consistent density. There will be no cork hotspots from the application or wear. I prefer sheet cork. Hot cork takes less time to apply, will change in density after a lot of wear, requires more skill labour and is more expensive.
@agubser07
2 жыл бұрын
I'm glad you replaced the shank! On the original Perry boots with the "White's" sole, the shank was molded into the outsole (same as Danners). I hope my Perrys do not need a rewelt when the time comes for a resole. 🙏
@jamesdaniel2363
12 күн бұрын
Although i speak Spanish, you gotta get some translation subtitles man. Your work is so good, everyone needs to know what you’re saying in Spanish. It will increase the number of views. VERDAD
@srdowns8816
2 жыл бұрын
Great explanation regarding the types of cork.
@a.csarmiento8847
4 ай бұрын
I thought he was saying I use “$hit cork” every time he was referring to “sheet corq”. I couldn't understand why he was bragging about that. But it was just my poor English and his accent. My bad. Haha.
@youhernandezaguayo5981
2 жыл бұрын
Excelente resole, Aarón! Qué buenas botas! Qué opinas de las moc toe de Whites? Saludos y el mejor de los éxitos! 🔨🔨⚡⚡
@AaronG2480
2 жыл бұрын
Gracias bro, la calidad de materiales es de primera, sin embargo no me gusto el estilo, estaba de echo apunto de comprar un par de estas pero después de ver cómo se hacen de anchas cambie de opinión! Saludos!
@cjanquart
10 ай бұрын
Sweet that KZitem got something right and suggested your video; was looking for a cobber since the couple places I've used years ago have closed. Good to know a somewhat local cobbler when the time comes for a resole.
@GabrielGuzman18
Жыл бұрын
Cómo puedo aprender hacer estos trabajos?
@GabrielGuzman18
Жыл бұрын
Cómo puedo aprender hacer estos trabajos?
@calbuilder7357
2 жыл бұрын
Great job once again. Those boots must be for Frankenstein. They look huge! Lol 😂 keep up the hard work.
@AaronG2480
2 жыл бұрын
😅😅😅✋🏻👊🙏
@carson2646
2 жыл бұрын
Aaron I watch you so much I may learn Spanish without trying 😀
@nelsonchavez1280
2 жыл бұрын
Hi Aaron !!! Como siempre muy buen trabajo 👍 Pura magia saluditos desde Hayward gracias por compartir el video
@AaronG2480
2 жыл бұрын
🤝
@TheDagraner4576
2 жыл бұрын
These boots are right in the same price catagory as the 877's from red wing. From your brief period of time handling them, do they seem like they are of similar quality? From what I know, the only difference is the styling.
@AaronG2480
2 жыл бұрын
Yes they’re almost the same , these run big and wider I wanted to buy me a pair but after I saw these I decided no to buy them anymore. Just my opinion
@DefectorOfFutureDays
10 ай бұрын
After you worked on them you decided you didn’t want to buy them?
@Vultain
2 жыл бұрын
I think you made the right point on all heeled boots needing a shank. I always wondered why Red Wing didn't use a shank with the Merchants? I always wanted a pair in Ebony Harness but given the lack of a shank, I never could quite bring myself to purchase a pair.
@suitrBJ
2 жыл бұрын
Oh I never knew that about the merchants that's such a strange exclusion.
@TheDagraner4576
2 жыл бұрын
I believe the mindset with the merchants was a refined, less hard work oriented boot ( A merchant), for someone who is not climbing ladders. You can often times dig into the history of the different models in the heritage line and find what they where originally marketed as way back in the day. I believe their "Sheldon" boots also do not come with a shank as they're of a fancier variety too.
@ryanmoore2779
Жыл бұрын
Garbage boot. Sole gone in 7 months 😂😂
@Inbal_Feuchtwanger
8 ай бұрын
I think ive seen before where the front of a wedge sole is sewn all the way through to keep it adhering to the midsole. Im wondering if this is something worth doing to prevent the sole from coming apart as you often see happen on these wedge sole boots. Or would it be too difficult to get a stitch through all of that, or just an unnecessary step.
@JinsKookieJams
Ай бұрын
*I know exactly what you're talking about! I've seen photos of the Cristy soles with the very front of the toe area in the bottom sewn. Then I've seen in Nick's Boots and JK Boots videos where they will sew right through the Cristy soles (not always), but only they do a 180 degree stitch. This means they stop the stitch just before the heel. I asked Nick's Boots on their channel about it. It is for more security, to keep the sole attached to the midsole. The contact cement also keeps them in place.* *I noticed not every cobbler does it. And Aaron hadn't returned an answer to you about it. Maybe he will after this comment? But also his email is at **0:10**. You can ask him that way too. Again, I think it really depends on a cobbler willing to stitch through the thick wedge soles or not.* *It would seem that contact cement is enough for the wedges to keep in place. I think it really depends on how hard someone is on their boots, and what they're using their boots for. So casual use would be fine. For people in labor such as construction, welding, and other intensive jobs, then it's possible the wedges could start separating. But I don't really know after how long. I can see how having the wedges stitched would be very useful for those jobs though! For other kinds of jobs such as retail, the office, etc where you're likely not in too many elements, those may be ok too with the wedges not being stitched.* *However, getting them stitched or not is really up to you. It wouldn't hurt them having them stitched. It could be an extra cost (you'd have to ask Aaron to be sure), and you'd have to see if Aaron can do that for you.*
@AaronG2480
Ай бұрын
You’ve already answered him 😜 thanks!! Is not really necessary, and they don’t look any good, it’s a different type of material Than rubber, Nitrile or leather etc. It really depends on what the person needs the boots for The majority of well known boot manufacturers don’t do it and haven’t done it. I know JK does it and a few others but is not really necessary not to mention that it’d have an extra charge, specially on stitch down construction boots, if people are hard on boots what they really need it’s a different type of sole. Thank you again! Cheers
@Inbal_Feuchtwanger
Ай бұрын
@@AaronG2480 Funny, I wrote this post around the same time I got a pair of Whites Perrys. Ive worn the tread completely off the Christys already now and thats using the boots in a rotation where I just wear them 3 days a week. I know people keep wearing them for a long time after the tread is gone, but honestly its a safety hazard for me at this point. I find myself slipping a lot now. Do you have a good suggestion on what I can resole it with that will be more durable and still look good? Should I just ask my local cobbler to give me whatever vibram lug sole they think works best? I was thinking maybe something like the Montagna. Will be used on concrete all day, will get wet, chemicals, brush against pallets, and avg 5 miles of walking a day.
@AaronG2480
Ай бұрын
Vibram Montagna it’s definitely a good option In terms of durability but they’re harder than Cristy and some times people don’t like it I’d try the Vibram 148 kletterlift on top of Vibram Cristy as long as your wedges are thick enough. Cheers! Thorogood Resole/Double Soles #shoerepair #cobbler kzitem.info/news/bejne/jqOFu2mck3iJpno
@MrSilvervw
Жыл бұрын
Fantastic content 👌 👏 👍
@Romulus_xxii
2 жыл бұрын
¡Honor a quien honor merece Maestro! 💯🔥 Que me has hecho sentir importante al mencionarme, me siento como toda una estrella.🙋🏻♂️😁
@AaronG2480
2 жыл бұрын
✋🏻👊😅
@kb9oak749
Жыл бұрын
These videos besides being very interesting, also inform those of us who are boot enthusiasts.
@waynedub1167
2 жыл бұрын
Well since you covered the cork and shank I'll ask about the why you didn't reuse the welt lol. Great job once again!
@AaronG2480
2 жыл бұрын
🤔😅
@fernsolo
2 жыл бұрын
Muchas gracias por el saludo, gran trabajo como siempre, un dia de estos te mando un email con fotos de mis 1907s que despues de un año de uso van a necesitar un re-sole 👍
@AaronG2480
2 жыл бұрын
Cuando guste Fern!✋🏻
@kb9oak749
Жыл бұрын
How do you clean the sides of a "Christy" sole or one like it? Great work Aaron!
@AaronG2480
Жыл бұрын
Thanks, trust me there’s no way to keep the soles clean!!😅
@cjanquart
10 ай бұрын
I saw a video with Brian the Bootmaker on Role Club used Oxy-clean, scrubbed it with a toothbrush and used a spoon as a scraper to remove the mixture, then wiped down with a cloth. They didn't get brand new spotless but pretty damn good; somewhat if you used an edge dressing on leather.
@jacobisler5234
10 ай бұрын
Was the original welt leather? Thank you!
@AaronG2480
10 ай бұрын
Yes it was
@TheFilletingfish
Жыл бұрын
Love to watch your hand work!
@Silver_Falcon_79
2 жыл бұрын
They look so great after the resole. You use the magic wand all the time. Greetings from Italy 😃
@AaronG2480
2 жыл бұрын
😮✋🏻👊
@serginho2535
2 жыл бұрын
Gracias por los saludos mo amigo, el viernes Osvaldo y yo pasamos a recoger nuestras botas mi amigo, saludos.
@AaronG2480
2 жыл бұрын
Muy bien Sergio!! Ahí los esperamos!✋🏻👊
@matttherrien9608
2 жыл бұрын
If I ever decide to send my Doc Martens across the Atlantic for a professional English resole they'll be getting a shank!
@TheJessiepacheco1992
Жыл бұрын
Whites run a little different because of the hight arch at least all the ones I have I wear 12 d in all other boots but 11 in whites or Wesco I own 6 pair of whites 3 different styles and 1 pair of job masters in Wesco hand made boots size a little different
@alexortiz365
2 жыл бұрын
WoW nice job 🙌🏼
@not-a-raccoon
2 жыл бұрын
Loving your videos. You have a new subscriber.
@AaronG2480
2 жыл бұрын
🙏
@nhelreyes8080
2 жыл бұрын
Aaron i like that sole,thats my problem of my RW 8130 the sole
@HVACOG
Жыл бұрын
What conditioning do you use brother ? Nice job!
@johnshutt6895
2 жыл бұрын
I would always go with leather than cork. Takes a little long to break in bought will always out last cork…
@luiscoria1747
2 жыл бұрын
Ya suscrito a tu canal! Me servira para cuidar mis botas y elegirlas mejor. Me interesan unas tipo moc toe mexicanas. Alguna recomendación?
@AaronG2480
2 жыл бұрын
Gracias Luis, la verdad yo acá aprendí el oficio y no conosco muchas marcas de aya hay unas botas que están haciendo un poco de ruido (Arador) debería checarlas saludos!
@luiscoria1747
2 жыл бұрын
@@AaronG2480 muchas gracias..las checare
@omarcervantes9752
7 ай бұрын
Las Thursday boots company son hechas en Mexico
@timothydewees
2 жыл бұрын
What glue do you use? I make leather goods and use barge cement or Rainier 315 but that looks different.
@AaronG2480
2 жыл бұрын
It is barge Timothy!
@mannysalas6725
2 жыл бұрын
How do send you my boots to get resoled?
@the_yankee_joiner
2 жыл бұрын
Does the leather change the feel of the boot verses the cork? Seems the cork would be softer but break down after a while…
Пікірлер: 69