@6:35 it's the v4 mobula 7 frame IIRC, the v2 was the thin and weak but ultralight one with asymmetrical struts, v3 was the heavyduty 2s one with thicker struts, v4 was a redesign for the moblite7. What was the v1?
@NickBurnsFPV
2 жыл бұрын
Ah dang got it backwards. Thanks for that update
@BrandonBeans
2 жыл бұрын
@@NickBurnsFPV I did some research and the V1 frame was just the Bwhoop75 and it looked exactly like the V2 frame except it was notoriously brittle and the Bwhoop75 V2 was the improved plastic formula. I have a v2 frame that's about 2 years old in regular use and only needs some Welders glue occasionally.
@661FPV
2 жыл бұрын
@@BrandonBeans the V1 was immediately replaced with the V2 because it would break so easy. I like the V2 because it's the lightest 75mm frame out that I know of.
@medrone7097
2 жыл бұрын
@@661FPV Lol, my V1 Mobula broke hovering, line of sight, when I bumped something.
@Bisdak.3475
2 жыл бұрын
The v4 would be a nice one if they oriented the same motor holes like on v3. Otherwise, I'm only using the betafpv meteor75 or cockroach75 for that matter.
@manmountain82
2 жыл бұрын
There's no ones opinion I value more when it comes to micros . Good choices 🙌
@ChrisParayno
2 жыл бұрын
"about me", perfectly fine! I love your tips and opinions as I learn something from every video. Great stuff.
@medrone7097
2 жыл бұрын
It’s great that there are so many flavors. I personally prefer 65mm with low kV motors when indoors because at my skill level the reduced speed & momentum are much more fun. Outdoors, 85mm 2S. I’m looking forward to those options with digital!
@ProjectMockingbird
2 жыл бұрын
I rotate my boards and canopy 90 degrees so I can toilet tank. It also helps with pre-loading/lean on race start since the battery isn’t in the way.
@NickBurnsFPV
2 жыл бұрын
For some reason I am so lazy I want to just rotate the hardware rather than reorient and remap🤷🏻♂️🤦♂️
@InfinityLoops
2 жыл бұрын
Your opinions are important to this community. Thank you for doing this. We have always been happy with BnFs that you have suggested! Nice shirt, too!
@CraigValadares
2 жыл бұрын
Thanks Nick! Just destroyed by uruav65 this weekend so I am in the market for another 65mm whoop. Looks like the mobula 6 is the next quad to join my fleet
@sixtofive
2 жыл бұрын
I'm definitely looking forward to your follow up video to hear your thoughts on the 85mm category. Running 2-3s batteries you can really start getting some impressive speed and performance at that size.
@MCsCreations
2 жыл бұрын
Fantastic tips, Nick! Thanks a bunch! 😃 I hope some day I can be able to fly inside as well. 😬 Anyway, stay safe there with your family! 🖖😊
@Clif_Brown
2 жыл бұрын
After a bunch of whoops, I'm back down to a low profile Modulite6 and Mobula6 and Mobula7 1S, all with Unibell HM motors and ELRS. Waiting for improvements in VTX's and goggles in HDZero before I buy or build a Mobula7HDZ whoop. Mr. Shutterbug has built a very light 65mm HDZero whoop with custom superlight HDZero cam.
@sunshynff
2 жыл бұрын
I didn't stop by to argue with ya don't worry. Just wanted to throw something out there, since you mentioned whoops and naked vistas. I bought a RTF DJI Megabee two x-mas ago, that came with the full air unit, I liked it but even back then, it was one of the biggest cinewhoops on the market, and it was heavy and clunky. Took prop guards off, and put 3.5" props on and flew it that way for a while then shelved it. Recently dusted it off, and rebuilt it. upgraded from stock 1404s to 1507s, got lighter weight 3d printed prop guards, an AIO board, with a naked vista. So basically lighter with better motors, I threw emu flight on for the hell of it, 1st time using, and the whole set up flew like a friggin dream, on stock Emu pids. it really is a whole new quad, One problem, naked vista was overheating like crazy, even on a cold day, 100mW, if I didn't take off within 20sec, overheat warnings. I'm thinking with old school ducts of the megabee encapsulating the hardware, not enough air. So, just to see if it would work, I just re-installed the 2 inner heatsinks on the vista, and left the top and bottom ones off. Obviously it added half the weight originally saved, but oddly enough the form factor at half naked, is much closer to full naked, than to a full vista. Anyway, haven't had a single overheat since, and it was 70 here in St Louis yesterday, and it still flies great. Sorry for the old man ramble, but wanted to share that with you, always good to have another option when building.
@borg1874
2 жыл бұрын
Thanks for the great review Nick. My pick would be the IFlight C85HD, that one shows the most promise to fly outdoors, given my abilities. 👍
@Wollari
2 жыл бұрын
Still like my mob6 over my Tinyhawk 2 (which I gave to my son). Maybe one day I’ll switch to ELRS or directly buy ELRS? Who knows. Im waiting for the upcoming video. Especially maybe I’ll build a naked vista toothpick or sometime similar
@Maxim_Nub
2 жыл бұрын
thats a video i really wanted lol thanks really wait for 3.5 and 2.5 categories :D
@Catiadr
2 жыл бұрын
The mob 6 is my favorite except that I have been through 4 aio boards.
@apexstudio324
2 жыл бұрын
I, too like the Mobulas. I converted my Mob 6 hd to the 75mm frame (following your video that covered the conversion). After breaking the Mobula 7 v2 frame beyond repair, I switched to the meteor 75 frame, and It has performed well for me. Lots of crashes with no breakage. Keep up the fantastic content, Nick!
@Soulsurferfpv
2 жыл бұрын
Great video Nick. I still like my original mobula6 best although I will be converting it to ELRS and it will be even better. I have changed the canopy too. 👍 Whoop Whoop 👍
@Shauny_D
2 жыл бұрын
I've gone through 7 different whoop builds and sizes through IGOW and settled on the moblite7 with triblade hq props and bt2.0. Either the betafpv aio FC or Diamond. No other build even comes close. I mean 8,9,10,11 minutes of fly time even when freestylin'!
@carlosr.2027
2 жыл бұрын
Is the moblite7 available in elrs 2.4 or do I have to build one with elrs I think the mobula7 is coming in elrs now but not sure if flight time the same as moblite7
@Shauny_D
2 жыл бұрын
@@carlosr.2027 i don’t think it is rtf but there is a the same diamond board you can buy with elrs. So it wouldn’t be hard to build.
@carlosr.2027
2 жыл бұрын
@@Shauny_D or can you gut out a mobula7 with elrs into a moblite7 frame and will flight time be affected do to weight by of mobula7 electronics/hardware or better to do your own build with the diamond elrs board
@Shauny_D
2 жыл бұрын
@@carlosr.2027 Mob7 parts are 3-4 grams heavier so it wouldn’t fly as well. With whoops getting weight down is key. The mob7 was designed as a 2s build as well so if you stick with its 16000kv motors on 1s it’ll feel way to sluggish. best to build from scratch with new parts and save weight where ever you can
@carlosr.2027
2 жыл бұрын
@@Shauny_D or buy the regular verison with frsky receiver and fly as is or would it allowed you to install a tbs tracer receiver on this regular frsky version or would I need to build one from scratch with tbs tracer I have a few tracer laying around ?
@CaptCalgary
2 жыл бұрын
Fantastic vid Nick. Looking forward to the next vid !!!
@albatrossfpv
2 жыл бұрын
If you don't mind me asking, how have you mounted the Runcam nano 3 inside the crux 3 canopy? I've also noticed the jello when flying outside and I'd really like to have four points of contact, but the only canopy available for me with four points of contact is the crux 3 canopy. I know the Runcam nano 3 is 14mm wide and the crux 3 canopy is meant to fit a 14mm camera, but with the adapter for screw holes on the side makes it 18mm wide, so I'm wondering how it could be mounted.
@NickBurnsFPV
2 жыл бұрын
It mounts up pretty natively. typically the runcam nano 3 has a plastic piece that goes around it to mount to the camera and has screw holes on the sides. This mounting piece is in the top right of this image. m.media-amazon.com/images/I/616cueFVx+L._AC_SL1100_.jpg
@maxertl3633
2 жыл бұрын
Great video! Would love to hear your opinion on the best toothpick to buy at the moment
@NickBurnsFPV
2 жыл бұрын
I have plans to cover the 3inch category yet too
@661FPV
2 жыл бұрын
It's the NBD Mosquito and Mosquito XL frames without a doubt.
@flipfpv
2 жыл бұрын
Nice roundup and some good tips on the Mobula6 options too.
@hendranandradrone7064
2 жыл бұрын
Hello Nick..thank for sharing👍🙏
@GrimSpeedFPV
2 жыл бұрын
Your opinion is very valuable! You have alot of time in these and really helps us out! I appreciate ya man🤜
@MrDeathFPV
2 жыл бұрын
*v4 mobula7 frame, I got a spare one in the mail yesterday, be prepared right?
@D18racer51
2 жыл бұрын
Was that a diamond fc with spi elrs on the moblite6?
@NickBurnsFPV
2 жыл бұрын
Yes I have been testing that one. Not sure if it’s being launched or if it is when
@D18racer51
2 жыл бұрын
@@NickBurnsFPV thought i spotted it!!!!👀lol
@maeldrz
2 жыл бұрын
I'm waiting that's one especially ! 😭
@D18racer51
2 жыл бұрын
@@maeldrz me too!!!!
@D18racer51
2 жыл бұрын
@@maeldrz to be honest though im starting to drift away from spi… ep2 style rx have been so rock solid for me… and spi not so much…. Im having trouble seeing the benefit anymore
@billmcdonald4335
2 жыл бұрын
You have your faves, we got ours. I'm still flying an LDARC ET100 V2, the all-time King of Whoops. It's running JMaverick ESC firmware, BetaFlight 4.2.9, and I've made some serious mods to its build. I use it in a small apartment in Angle mode, and I think I've tweaked it so it's one of the best-handling examples of its type. Damn well should be after all the time I've put into it. LDARC recently stopped making them, which kinda sucks. It's a chonky unit, but it handles like a 75mm thanks to the mods I made to its hoops. The only downside is the stock VTX - it's adequate for my tiny space, but hopeless outside. I'll get around to dealing with that some day. . .
@wmcewa01
2 жыл бұрын
There’s a diamond f4 board with ELRS onboard? Did I miss that?
@csanadegervari1747
2 жыл бұрын
That's what I am wondering too.
@chrisbee5481
2 жыл бұрын
Its not the diamond elrs board. Thats a new different 1S elrs 15A one. Happymodel will be releasing the diamond F4 middle of march.
@661FPV
2 жыл бұрын
@@chrisbee5481 2:30 that's a Elrs diamond F4 that's not out to the public yet
@wmcewa01
2 жыл бұрын
Wow. Cool. Nick Burns always on the inside track.
@kirbincap8307
2 жыл бұрын
Great as always Nick and I just made a new purchase! Man I wanted the Mob 7 and Zorro but elrs scares me 😂 as I don’t know how to flash anything yet. RDQ shipped out my Nanohawk X this morning! About 1 hour after purchase. Giggity
@NickBurnsFPV
2 жыл бұрын
enjoy that quad!!
@ChrisM-yr5tt
2 жыл бұрын
Great content Nick thanks for sharing. I liked the mobula just didnt find it robust enough for me. Have 2 broken mobulas if you need parts cars lol
@cedricgrandseigne
2 жыл бұрын
I' m not surprised not to see the UZ65, although it's been my favorite since it's release: too bad no reviewer digged into this whoop that only needs good pid tunning to give fantastic flights. On top of this, the frame is only the best out there, light, strong, and with a tight battery tray.
@knoopx
2 жыл бұрын
I like my UZ65 but many people don't like the way it flies. I broke a couple of frames, wouldn't say it's the best.
@cedricgrandseigne
2 жыл бұрын
@@knoopx do you have any frame you haven't broken once? Compared with mobula6 presented here, it is just night and day!
@knoopx
2 жыл бұрын
@@cedricgrandseigne yes, the (old) betafpv meteor frame
@nikotttin
2 жыл бұрын
I really love the 2s 85mm bunch :)
@NickBurnsFPV
2 жыл бұрын
Fly it inside?
@FastSloW-qt8xf
2 жыл бұрын
To me it's between the betafpv 65pro and the new mobula 7. I think the 65 pro take a the w thougb
@damfastfpv8016
2 жыл бұрын
Thanks for the Update video Nick! love it!
@wongowonga
2 жыл бұрын
This is the video we have been waiting for :)
@leadslinger5130
2 жыл бұрын
I tried the meteor 65 frame and it's nice but I found that changing prop was much more difficult in that frame compared to the mobula 6 frame. I beat my props up a lot so I switched back to the mob 6 frames for my 65mm builds. broken motor wires are harder to fix then putting welder on a frame. just my experience
@flushfpv
2 жыл бұрын
I just bought the iflight protec 25 pusher. So far I love it. But did hear about durability. So I guess I'll find out.
@maeldrz
2 жыл бұрын
New coming whoop at 1:46 ? 😏
@NickBurnsFPV
2 жыл бұрын
possibly, I don't know. I sometimes do some testing but never see the product in whole or part released.
@maeldrz
2 жыл бұрын
@@NickBurnsFPV However I hope this FC will be released 👌
@jakestyles002
2 жыл бұрын
Great work as always. I am wondering why the GepRc CineEye/Thinking P16/TinyGo didn't get more love from pilots? It is an incredible flyer, very durable, and is indoor/outdoor. Maybe it was the price point?
@NickBurnsFPV
2 жыл бұрын
For inside flight they just aren't as good of a performer and in many cases designed for slower flight or incredibly noisy inside
@OGFlow77
Жыл бұрын
King of micros 👊🏼🤣 thanks for your informative videos always brother 👍🏼
@michaelsouders4026
2 жыл бұрын
Nick, how did you get a Diamond F4 flight controller with Express LRS? I don't think I've seen those anywhere. Did you accidentally reveal something forthcoming?
@661FPV
2 жыл бұрын
Shhhhhh 🤫
@NickBurnsFPV
2 жыл бұрын
Yea I kinda did 🤦♂️. I have had it a while and forgot it hadn’t been released.
@bbsheppo
2 жыл бұрын
@@NickBurnsFPV do you have any idea when it will release?
@NickBurnsFPV
2 жыл бұрын
@@bbsheppo No I do not.
@Latchfpv
2 жыл бұрын
Nick's favourite list, aka my shopping list. I have the Mobula7ELRS on the way to me currently, though my current daily driver is the Meteor75ELRS. I quite love the way that flies and I had a bunch of batteries from them anyway so I ended up nabbing that. I'm hoping the Mobula7 flies as well or better. Sticking with analog for now though, considering how much money I'm burning on that, I am just not ready for digital yet.
@NickBurnsFPV
2 жыл бұрын
I still fly mainly analog. I don’t find the same performance and thus fun when I go to dji/air unit lite
@cliffandrews
2 жыл бұрын
6th flight on my Cinelog 25 and a motor/board goes bad. I replace the motor and take it up a couple feet and boom, drops to the ground. Now I have to decide weather to replace all 4 motors with the newer ones they're using now and the board or just buy a whole new quad. This hobby maybe out of my $ range. Beautiful quad by the way.
@NickBurnsFPV
2 жыл бұрын
Sounds like the esc might be damaging motors. Could need both. Sorry this is bringing pains
@cliffandrews
2 жыл бұрын
@@NickBurnsFPV Yes I tested the ESC with a meter and it showing that it's bad. Thanks Nick.
@FPVish
2 жыл бұрын
Question: Mobula 6, how do you fix the memory issue of the board when the 1s battery goes to low ? It losses its programming, and it doesn't work anymore after u install a fresh battery. I have only seen a couple complaints about this issue, but haven't seen the fix. And thanks for the great content as usual
@NickBurnsFPV
2 жыл бұрын
I am not aware of a fix. I was told this was a hardware issue that was resolved at the manufacturer. The best thing to do it land and get a fresh battery before it gets to 3v. Battery voltage below 3.4v is damaging the battery health
@Yubelar
2 жыл бұрын
i think its hilarious that we need to state that it is personal opinion and others might not agree :( keep doing your thing youre amazing!!
@dickvancampen3318
2 жыл бұрын
Mobula 7 still the whoop outdoors for me...elrs hmm just got my jumper lite . Looking forward for the mobula 6 elrs but then with flysky option.the mobula 7 is out new motors gotta have them but I wait for 65 mm version.
@NickBurnsFPV
2 жыл бұрын
The classic 2s mobula7?
@dickvancampen3318
2 жыл бұрын
@@NickBurnsFPV yes just like the trashcan both great woops.
@TheBigRat770
2 жыл бұрын
Nick your the reason I bought the Mobula6. Thank you
@FierceCards
2 жыл бұрын
Mobula 6 one of my favorites
@stephenlomond3720
2 жыл бұрын
thank you for your opinions. always nice to hear a honest one stated as that an opinion.
@Therberg2500
2 жыл бұрын
Hi Nick, I toilet tank my batteries on mobula 6's and 7's. I just turn the canopy 90 degrees, adjust flight controller orientation and remap the motors! I would be interested in your pid and rpm filtering setups on both of those.
@661FPV
2 жыл бұрын
I do The same on all my 1s whoops, it helps stop the battery from ejecting as easy, and I feel like it gives more response on the pitch axis in angle mode for faster acceleration out of corners.
@NickBurnsFPV
2 жыл бұрын
I should have acknowledge that option. I am so lazy I haven't don't it more than a time or two. :)
@nikotttin
2 жыл бұрын
@@NickBurnsFPV one more toilet tanker here :) By the way the WhatsApp spammer is hitting your channel too.
@NickBurnsFPV
2 жыл бұрын
@@nikotttin Today? Which video?
@nikotttin
2 жыл бұрын
@@NickBurnsFPV this very one here 🙄
@michaelmatthews6421
2 жыл бұрын
Can't wait for the next part of this series
@Taboloncawonthemasters
Жыл бұрын
Mobula 6,7 or the tinyhawk 2? Or what would you choose for fast fun indoor flight? As I share the same style of flight as you do! Thanks ahead!!
@NickBurnsFPV
Жыл бұрын
I prefer 75mm, for performance and size inside. With that of those I would chose the mob7 1s elrs
@661FPV
2 жыл бұрын
Umm did you just show the diamond F4 Elrs version?? That's not really out yet right? 2:30
@NickBurnsFPV
2 жыл бұрын
Right, its not out and I don't know when or if it will be :(
@661FPV
2 жыл бұрын
@@NickBurnsFPV I've seen angry Don has mentioned it a few times on his channel as "coming soon" but hasn't shown the board, I don't think he has one yet. You just shown the first one to the public it looks like! Now we all want it! What motors are on it? 0802 or 0702s? What's the dry weight? Give us specs!
@NickBurnsFPV
2 жыл бұрын
@@661FPV I don't think I should say. I may have gone to far already.
@stelic9515
2 жыл бұрын
Thanks alot
@MichaelDFPV
Жыл бұрын
For your 65mm whoops, have you converted them to Bi-blade props yet? I like how my Mob6 ELRS flies on Bi-blades and converted my others to Bi-blades.
@NickBurnsFPV
Жыл бұрын
I have flown many whoops with biblades. I prefer tri blades, likely do to my heavy cornering flight style.
@MrCrowleyandhisdrone
Жыл бұрын
Thanks again, great vid
@djmorodaraye4313
Жыл бұрын
Where is the 2023 edition this video is a year old!!!!!!!
@airdevil21
2 жыл бұрын
Hi Nick! Great video, fun to see your preferences! The UZ65 frame is quite strong in my opinion I crashed it straight into concrete trying to power loop myself and it is still in one piece. The motors are not that good lost 2 motor skrews ripped the treat out... O and build a TKS 75 2s today witch version of emu flight did you use?
@NickBurnsFPV
2 жыл бұрын
looks like mine have 0.3.3 on them.
@airdevil21
2 жыл бұрын
@@NickBurnsFPV Thanks i will try that out.
@seewell8168
2 жыл бұрын
Haha I really enjoy seeing what you enjoy the most. Great video.
@NickBurnsFPV
2 жыл бұрын
Thank you
@dropfile
2 жыл бұрын
It seems like meteor65 *was* more durable; however, they've changed the secret recipe recently. Probably because of a recent rise in plastic prices. It became more fragile. I've got the old version and it's indestructible still.
@NickBurnsFPV
2 жыл бұрын
so your breaking the new meteor65 frame on the regular?
@dropfile
2 жыл бұрын
@@NickBurnsFPV Yep.
@backyardr.c.channel4732
2 жыл бұрын
Great video Nick!!! I have the mobula 6 I want to put the parts in a meteor 65pro frame with the 35mm props!!! Is that doable?
@NickBurnsFPV
2 жыл бұрын
sure, likely require some tuning.
@pandrews01
2 жыл бұрын
Hi Nick, I love the channel and your reviews. You've since become one of my "go to" FPV channels. I'm looking for a tiny whoop (for the house/indoors) that I can use with my DJI system. I only have 5" quads. I was wondering of you could give me some recommendations. I understand everything is a preference and people are/can be particular. I am new to whoops, never flown a whoop, except in a sim. Could you recommend one? I had three in mind (subject to availability) GEPRC thinking P16/GEPRC Rocket Plus/ iFlight Alpha A75/85/ TransTECH BEETLE. Just a general recommendation would be appreciated. Anyone other opinions or suggestion are also welcome. I would like to have a good first whoop experience.
@NickBurnsFPV
2 жыл бұрын
Thank you. I suggest checking out Dax Neal's web ship. the Mobigital is likely the most indoor friendly dji whoop. Its a custom build that one could do. I have a video on it here, where I did build it myself. kzitem.info/news/bejne/z4l8x4mZh6Wnf2k
@pandrews01
2 жыл бұрын
@@NickBurnsFPV A sincere Thank-you.
@ARCEYE78
2 жыл бұрын
My mobula6 has suffered the common fc death, first was gyro issues and then an esc issue that finally put it into the spares box, didn’t really use it much either. although brushless is better for performance my old brushed inductrix original tiny whoop is still going strong, will I buy another mobula6? I’m not sure 🤔
@biggfpv2721
2 жыл бұрын
Where do u get that canopy u have on the mobula 6 nick?
@NickBurnsFPV
2 жыл бұрын
That is the mobula7 elrs canopy. Very new not likely available as an individual part just yet
@matelslug1
2 жыл бұрын
can i buy this bnf mobula elrs edition and fly with my e6 emaxx transmitter???
@krissfly
2 жыл бұрын
I’ve been over working on my new channel organic clean food connection for the last three years. Out of the loop :-) But things really haven’t changed. I agree my Mobius six is sitting here one my favorites. I probably have 50 or so :-) but most of them are old school brushed with different control boards for beta flight. I also have the Mobius seven really like it. Most all of mine are custom build. But I do have one I picked up that looks like an American flag. That is a fun ripper
@NickBurnsFPV
2 жыл бұрын
That one is likely the us65, which I think does 2s as well.
@airdevil21
2 жыл бұрын
@@NickBurnsFPVHi Nick. the older one is 1s. They made a new one that could do 2s.
@NickBurnsFPV
2 жыл бұрын
@@airdevil21 ah, I thought that one was all white with the camera and vtx connected in the dual pcb format.
@airdevil21
2 жыл бұрын
@@NickBurnsFPV oke. No they had a US and DE edition in 1s and then the new one on 2s also in US and DE edition. I don't know about the board configuration I never owned one i just look to much on the banggood app :)
@nickvledder
2 жыл бұрын
Could you also make a whoop-video suitable for the European market?
@NickBurnsFPV
2 жыл бұрын
what is a whop suitable for the European market?
@MickRatanapanyo
2 жыл бұрын
Hey Nick, what are your reasons for loving whoops? How do they fly in comparisons to regular X-Frames without prop guards? Thanks!
@NickBurnsFPV
2 жыл бұрын
My love comes largely from my desire to fly when ever I want. With a whoop I can always fly inside regardless of weather and in comfort. Its pretty rare I fly whoops outside other than for review purposes. The agility and performance of non whoops outside is what I desire outside. The prop wash handling is better on open prop as well. Whoops have the air resistance of the prop protection, I feel that decreases the ability to do what I want to when I am outside.
@MickRatanapanyo
2 жыл бұрын
@@NickBurnsFPV thanks!
@MickRatanapanyo
2 жыл бұрын
Whoohoo! Thanks! What did I win?
@hookedfpv3219
2 жыл бұрын
my opinion mob 6
@broken4999
Жыл бұрын
Hi nick great video man, could you help me I'm trying to find a 2s whoop that will work on my dx9 spectrum, any suggestions? Thanks alot nick
@NickBurnsFPV
Жыл бұрын
2s whoops are kinda rare over the last 3 years. Most whoops are using an all in one board with the receiver in the board and surprisingly we haven’t seen spektrum on these boards. I am not aware of anything current in the bnf for spektrum. I suspect we might have to add our own receiver to a whoop. Which should be doable if the receiver can use 5 volts
@bocephus41
Жыл бұрын
What canopy did you use with Mobula 6 conversion to Meteor65 frame?
@NickBurnsFPV
Жыл бұрын
That is a goober canopy from newbeedrone
@ironoreiron
11 ай бұрын
The new mob 7 hd 1s is just the mob 7 but its better coz it uses 1s (the normal mob 7 hd used 3s)
@NickBurnsFPV
11 ай бұрын
Sure, keep in mind how old this video is.
@ironoreiron
11 ай бұрын
@@NickBurnsFPV yea i kinda did feel like the 1s is newer, idk
@TheCastorPlays
2 жыл бұрын
Banggood is quickly growing into a place to avoid for me. Got my Mobula 7 1s ELRS in the EU. Tried banggood first, after they pushed out their shipping date for a whole month, I cancelled and ordered from a shop in France... Similar thing happened when I went to buy my Mobula 6
@NickBurnsFPV
2 жыл бұрын
Banggood has a habbit of taking order and updating product availability later. Very frustrating
@chrisbee5481
2 жыл бұрын
I dont order on BG unless it says it stock. Easy as that
@charlesc7020
2 жыл бұрын
My transmitter is jumper tlite with elrs on the back. just really miss having a lanyard looked everywhere any solutions out there anyone know about?
@edivollgas719
2 жыл бұрын
might be a follow up with some setup tips ? will go for the mobula7 elrs .... still dreaming of bringing my old mobula7 hd(turtle) to betaflight 4.2 so i could switch tx power with a switch ...... anyone to share a diff for the 4.2 bf pids ?
@nimrodquimbus912
2 жыл бұрын
Anyone know when the Zorros might be stocked?
@TheeLoveland87
2 жыл бұрын
How did you get ELRS on the moblite? Is it just a simple modification to the board?
@NickBurnsFPV
2 жыл бұрын
No, that was a prototype of the mobeetle6
@SiNFPVGUAM
Жыл бұрын
Have you seen the GEPRC Thinking HD?
@NickBurnsFPV
Жыл бұрын
Yes, That one was about 2 years go. I believe it came originally with the nano camera that had odd halo effects outside in bright sun, but the later versions of that same camera were better. This is the video of my review with the original camera kzitem.info/news/bejne/rpWg2Xuhs52JeJw
@TERBANGFPV
2 жыл бұрын
ni Nick may i ask where did you get that diamond fc with elrs built in? i can find it anywhere...
@NickBurnsFPV
2 жыл бұрын
Its not released yet. :(
@TERBANGFPV
2 жыл бұрын
@@NickBurnsFPV well.. when it come out the gyro wont be mpu6000 anymore
@richardmcguigan1382
2 жыл бұрын
WHAT DO YOU THINK ABOUT THE POLAR NANO? THAT IS WHAT MY I FLIGHT 75HD CAME WITH YOU HELP ME WITH ME DECISION. I PERONALY LOVE IT BUT I HERE PEOPLE COMPLAINING ABOUT IT. ALSO ABOUT THE HEAT SINK MINE GETS PRETTY HOT AS IT IS SO IT THAT MORE OF A SEASONED FLYER AND NOT FOR A BEGINNER TO REMOVE THE HEAT SINKS
@NickBurnsFPV
2 жыл бұрын
It looks pretty good to me. I think the biggest downside is it doesn't do 120fps, like the nebula pro and nebula nano pro.
@WIZARDDETECTIVE
Жыл бұрын
Thanks
@bdkbdk8005
Жыл бұрын
Any suggestions for a 9 year old to get them started? Something a little easier to fly?
@NickBurnsFPV
Жыл бұрын
maybe something like this. It allows us not to spend much, easier to fly and can be modded to start fpv on the cheap as well. kzitem.info/news/bejne/12qvsX1srZ6Qg6Q
@bdkbdk8005
Жыл бұрын
@@NickBurnsFPV awesome thank you!
@rockman49er
2 жыл бұрын
You didn't mention what size motors on the mob 6 19 or 25 thousand kv
@NickBurnsFPV
2 жыл бұрын
25000kv is my preference. I think I mention that, but I may have not stressed it as my preference.
@4li60
2 жыл бұрын
From all my drones I fly my Moblite 7 the most. Sometimes I feel guilty not giving enough attention to my other drones, guess what? While I recharge my other drone batteries, I rip a couple of Whoop batteries 🤣🤣
@NickBurnsFPV
2 жыл бұрын
Warm up packs 😁
@TheAleman03
2 жыл бұрын
Why when I arm my mobula 7 the motors start at full speed instead of idling
@NickBurnsFPV
2 жыл бұрын
I suspect either the props are off or your holding on to it. In either case that is normal. if you don't like it turn off air mode in the configurator.
@davidxflynn
2 жыл бұрын
nick you should also review holybro kopis 2.5 whoop as well.. ?
@NickBurnsFPV
2 жыл бұрын
maybe, but not sure.
@jamessong5838
Жыл бұрын
What do you think about flywoo firefly? is it better?
@NickBurnsFPV
Жыл бұрын
Better than what quad? These are all whoops were the firefly isn't really as it has prop guards and going to be very challenging to flying inside a typical house.
@rodrigoparula1328
Жыл бұрын
The 75mm Mobula7 1s can be used with 300mah batteries?
@NickBurnsFPV
Жыл бұрын
The flight will be very short and the battery will need to be secured as it won't stay in the battery tray
@rayv882
2 жыл бұрын
I'm new to the hobby and was thinking about buying a GEPRC TinyGo what do you think of that quad?
@NickBurnsFPV
2 жыл бұрын
It’s a pretty good kit. The downside is we can’t use that radio on other quads. The receiver and protocol is geprc proprietary.
@rayv882
2 жыл бұрын
@@NickBurnsFPV OK I appreciate it!
@miquelmarti6537
Жыл бұрын
what FC would you recommend for a TKS 2S 2inches micro drone? I built one on a 5A board and it fried (?) after the second crash (one motor twitching, I guess that means ESC broken). I would like to build that again because I loved the feel, but I'm afraid of burning an FC per week. I would love to hear your recommendations.
@NickBurnsFPV
Жыл бұрын
I would look the happymodel x12 or the flywoo f405. The flywoo board requires soldering and comes in two flavors, one without a vtx and one with....5in1 vs 4in1.
@miquelmarti6537
Жыл бұрын
@@NickBurnsFPV Thank you Nick! I just mounted the x12 and it flies again :) BTW is there a way to setup an Amp limit? I can't seem to find it in BF Molt bon any & Happy new year!
@NickBurnsFPV
Жыл бұрын
@@miquelmarti6537 no amp limit, there is a motor limit.
@quadimus
Жыл бұрын
As a guy that likes to just cruise around his house and slowly fly, what would you recommend for a tiny whoop for us " non racers"? I know that you said to get the 19,000 kv motors but is there a specific whoop you'd say does better going slow than the others?
@NickBurnsFPV
Жыл бұрын
The main challenge flying inside is throttle control. We can use a motor reduction to make the throttle less responsive. To fly slow lower the camera angle as well. Camera angle naturally slows us down as our eye like to focus on the center of the screen
@quadimus
Жыл бұрын
@@NickBurnsFPV you mean a throttle reduction in beta flight or whatever program the whoop is using. Thank you for the quick reply!
@NickBurnsFPV
Жыл бұрын
@@quadimus yes, I believe that is the correct term
@johngreen5837
Жыл бұрын
Just bought a mobula 7 1s hd spi elrs. I bought 650mah's. It flies 4 minutes. should I have bought 450's?
@NickBurnsFPV
Жыл бұрын
It depends what you want out of the flights. More aggressive or agile flights need lower weight, longer smoother flights generally more.
@rgglenn150
2 жыл бұрын
Is it ok to use crossfire on a tinywhoop for race?
@NickBurnsFPV
2 жыл бұрын
yea, but it adds weight with an external rx, which puts the quad at a disadvantage.
@kantony6694
2 жыл бұрын
Love your work pal, especially when it’s your own opinion lol
@Shauny_D
2 жыл бұрын
That HD zero whoop canopy would attach at the extra point on the mob7 v4 frame right? There is an extra support and screw terminal for it...
@NickBurnsFPV
2 жыл бұрын
It should, but I have not done a dry fit, the height of the stack might not connect the canopy to the frame.
@Shauny_D
2 жыл бұрын
@@NickBurnsFPV it would be a great canopy and frame to use on just a split cam hd to get props out of view of it worked
@NickBurnsFPV
2 жыл бұрын
@@Shauny_D true it would bring the camera forward and possibly remove the props depending on camera fov and angle.
@Shauny_D
2 жыл бұрын
@@NickBurnsFPV I use the old mob7 canopy for that now on hd 2s 75mm and 85mm but i’m sure this version is lighter
@TaseenAli
2 жыл бұрын
cinelog25 is really a grate one. but yea I replaced like 4 sets of ducts and on its second frame now haha.
@NickBurnsFPV
2 жыл бұрын
yea, the prop protection doesn't take much abuse.
@seanconnolly2179
2 жыл бұрын
Do you know the eta for the hdzero 1s board?
@NickBurnsFPV
2 жыл бұрын
Sorry I don’t. I suspect hdzero production is running full tilt for all the hdzero products
@seanconnolly2179
2 жыл бұрын
@@NickBurnsFPV That’s good news for me 😁👍👍
@pksteffen
2 жыл бұрын
Just got my Mob7 ELRS. Does it come with a unique version of ELRS 2.0. Hoping all I need to do is enter my UID in Betaflight CLI and then bind.
@NickBurnsFPV
2 жыл бұрын
Not unique in terms of proprietary. I believe we do need to bind at 250hz though
@brandonohman8018
2 жыл бұрын
Have you flown the Beta95x V3 or Tmotor Tron80? If so how do they compare to the iFlight C85 HD for acro?
@NickBurnsFPV
2 жыл бұрын
I have not flown those. From the design I see some issue with the tron80 having a stable fpv image and the prop prop protection looks fragile. The 95x is pretty big for indoor flight so it’s likely just outdoor only unless the indoor space is very large/industrial
@brandonohman8018
2 жыл бұрын
@@NickBurnsFPV thanks
@flyfpvfish4962
2 жыл бұрын
Nice review.. I am a whoop flyer to.. Q.. I fly my mobula7 battery to low it fell about 3feet from the ground.. and lost bind.. rebinds but power cycle.. and it unbinds.. any ideas?Thanks..
@NickBurnsFPV
2 жыл бұрын
We need to avoid the battery going below 3volts. This is also not good for battery health
@NickBurnsFPV
2 жыл бұрын
This doesn’t happen on all whoops the first batch or so of the mobula6 has this issue. It’s a hardware fix that the manufacturer had to fix
Пікірлер: 300