Look at Jay finding all the things he needs instantly instead. I hope the shop stays this organized and doesn't turn in to my garage!!
@petrolhead0387
Жыл бұрын
Hey Jay, coming from a plumber, swap your pipe cutter for a pipe slice. Much easier to use and a cleaner cut. The only drawback is that they are limited to specific pipe sizes, so make sure you get the right size for that pipe diameter.
@TheZoenGaming
Жыл бұрын
As someone who did plumbing installation for a few years before college, I second this! I hate pipe cutters. They dull at the weirdest times and can end up chipping any external finish around the cut.
@mehck-gk9yn
Жыл бұрын
7:27
@petrolhead0387
Жыл бұрын
@@mehck-gk9yn ?
@mehck-gk9yn
Жыл бұрын
@@petrolhead0387 This is the face of stubborn.
@petrolhead0387
Жыл бұрын
@@mehck-gk9yn ok? Not sure what that has to do with my original comment. I was talking about the pipe cutter that he used, not the saw.
@darrenpowell8561
Жыл бұрын
A note about acrylic, you can get acrylic glue and cut two tunes at 45 to make a 90. Acrylic glue actually welds the acrylic together. Can lookup making acrylic aquariums on how it works. Could mean no fittings for turns.
@glebglub
Жыл бұрын
but wouldn't that would be a true 90 degree causing loss of head pressure? afaik 90 degree fittings are actually curved to lower that drop petition for Jay to test this
@sakexz
Жыл бұрын
MORE PUMPS!@@glebglub
@deminybs
Жыл бұрын
@@glebglubnothing a better pump can't fix 😅
@landonbrown5295
Жыл бұрын
@@glebglubEasy fix: break the turn into multiple segments
@Allstoned26
Жыл бұрын
@@landonbrown5295 pie cuts!
@merrykzietzke2792
Жыл бұрын
I'd love to see more content like this. Tools and accessories that could make our lives a tad bit easier.
@patrlim
Жыл бұрын
I do like that the crowbar you have is red, reminds me of a certain theoretical physicist.
@drnafari0us962
Жыл бұрын
The knight in shining hazardous environment suit?
@patrlim
Жыл бұрын
@@drnafari0us962 Gordon Feetman
@Redmage913
Жыл бұрын
Golden Fartman.
@user340243750
Жыл бұрын
When we would cut J-channel for siding, we would use a plywood blade backwards. You may want to try the silver blade backwards to see if it cuts cleaner edges on the tubing. Just an idea.
@nextdoormat8554
Жыл бұрын
Jay. YOU are our favorite tool in the shop!
@AssortedBits
Жыл бұрын
Wow... I can't do much but upvote and clap in appreciation of this comment.
@tunin6844
Жыл бұрын
Something you might consider is a small bench top band saw. Regular woodworking blades would cut the various types of plastic, but I expect a metal cutting blade would do anything you need. The bandsaw might also serve you better for oddball parts with custom builds. The cost would definitely be higher though.
@theghostofthomasjenkins9643
Жыл бұрын
for a small bandsaw for his needs, it would probably be a couple hundred bucks, but it'd last him the rest of his life with such light work.
@bruwin
Жыл бұрын
@@theghostofthomasjenkins9643 And it's possible he could get one used if he keeps an eye out on facebook marketplace and such. I tend to see stuff like that all the time for well under $100.
@walterlegere1403
Жыл бұрын
Band saws have blade rpm's that are even slower than his little cut off saw.
@tunin6844
Жыл бұрын
Yes? That has nothing to do with whether they will cut something or not.
@richmotz304
Жыл бұрын
I have the Drillmaster version from Harbor Freight ($35)... This works awesome! Definitely use the toothed wheel, no melting
@ToddSchuldt-ng6xd
Жыл бұрын
It looks identical and even says "Compare me against JOUNJIP"😁
@Stilkdog
Жыл бұрын
Pretty sure it's the same thing, but I mean it's a lot cheaper, they do have a 6 inch model maybe Jay could take a look at for like $40 see if it's better for metal as it's a bit more powerful than this one.
@brucepreston3927
Жыл бұрын
I bought one of the Drillmaster ones also for cutting bullet brass...It actually works quite well! I don't think it would hold up to a lot of hard use though...
@steves7345
Жыл бұрын
Cheap and effective 👌
@computaterjones
Жыл бұрын
@brucepreston3927 it's surprisingly durable. We use one in our machine shop and it's lasted two years of abuse and only needed a new belt.
@KaTooMaz
Жыл бұрын
TIP: 14:28 Put a nut on the bolt/screw before cutting it. Then round the end of the bolt/screw end with grinder or file and then the removal of the installed nut will clean up the threads.
@leec3881
Жыл бұрын
My thoughts entirely.
@Sir.Smashalot
Жыл бұрын
this is the single best comment because my foreman preached this for my entire 4 years of apprenticeship!
@ZerberusVII
Жыл бұрын
Proxxon KGS 80 has a guard, 80mm blades (for 16mm tubes and bigger), more power for metal cutting and a much better build quality.
@ZerberusVII
Жыл бұрын
The 80mm 250teeth Proxxon 28730 Blade "Circular saw blade made of high-alloy special steel (HSS)" is also good for tube cutting.
@thefloorislavarfc
Жыл бұрын
Good suggestion, will try it. Can't use the guard with the 80mm blade though, right?
@ZerberusVII
Жыл бұрын
@@thefloorislavarfc Yes, that is possible and that is the way it is intended (all blades are 80mm for the kgs 80). The guard automatically folds up a bit when you move the saw down.
@Montisaquadeis
Жыл бұрын
Looks like the KGS 80 is going for 4-5 times the price and is out of stock everywhere I am seeing it listed
@thomasphillips885
Жыл бұрын
Yeah it's like 4-5 times the price of this thing!
@lukeperryglover
Жыл бұрын
It's awesome how excited Jay is over this. Glad he loves it (I'm halfway into the video).
@HarryComa
Жыл бұрын
I have a Proxxon KS230 , mini-table saw and it works great. Easy to cut tubing, acrylic panels, thin metal. Might be hard to find in the US though, but check it out. I had mine for 11 years now and only changed out the blades.
@peterpain6625
Жыл бұрын
Those are great. They also cut flesh and fingernails like it's nothing. Speaking from experience :)
@rickmiller4202
Жыл бұрын
Proxxon is available in the US from Micro-Mark.
@HarryComa
Жыл бұрын
@@peterpain6625 And foreheads... i dropped something on the floor and bent down to pick it up, and felt a pinch in my forehead... wasnt deep though, just touched the skin 🤣
@DigitalHi5
Жыл бұрын
@@HarryComa always turn off power tools when not in control....
@vpx23
Жыл бұрын
I guess Proxxon KG50 is a better match.
@koza2
Жыл бұрын
Look up Dremel mount accessories. From mill to circular saw to lathe, there's a lot to turn a good Dremel into mini table top tools. Not to mention, the 3D printed Dremel mounts, including tube cutters.
@BehrensTrumpet
Жыл бұрын
For metals a negative rake toothed blade is best. Stops it from biting and jamming as easily. Negative rake is basically just that the angle of the teeth is NOT leaning into the cut(makes the tooth tip penetrate like a spear), but instead is angled away from the cut and kind of scraping the metal.
@HootMaRoot
Жыл бұрын
Like turning the blade backwards, same as you do when using a circular saw to cut thin sheet metal
@cyberpunk1161
Жыл бұрын
Was thinking the same thing. Turn the blade around works for sheet metal.
@agentcrm
Жыл бұрын
That blade that's shipped is a steel cutting blade. Yes you do use positive rake tooling all the time when cutting ferrus materials. It's only on Ali and Brass that you use a negative rake saw
@NeneExists
Жыл бұрын
I was thinking it's jamming up on the tubing because the walls are thin, so there will only ever be one tooth engaged in the cut through the wall, whilst you need two or three to cut smoothly. You can see it grabs as soon as the cut is through the parallel section.
@T.Lspitz
Жыл бұрын
THIS. THIS IS THE ONLY CORRECT ANSWER.
@fi5ke
Жыл бұрын
it's these type videos we want in full length... like your friend showing his new tool when you just stopped by. Glad it's not a short!
@thelespauldude3283
Жыл бұрын
Absolutely loving the new studio furnishing and testing area. Crazy how far you have come, you deserve every bit of it. Keep up the awesome content, cant wait to see all the new stuff getting used in future projects.
@MelroyvandenBerg
Жыл бұрын
I don't like the middle table. It doesn't allow Phil 5o film straight. Because the double table is too big.
@JacobMontgomery-f6v
Жыл бұрын
I have an 18V battery powered miter saw with the 10” blade, and on a whim I tried a plastic/aluminum blade on PMMA. Cuts like butter and works wonders. Definitely plenty of torque to cut through the plastics and metal tube.
@bdahb5040
Жыл бұрын
Jay, you can get pipe tubing cutters like you showed for the brass with reamers built in specifically for getting rid of that ID bur. Also, good advice on the sanding for the o-ring. I work in HVAC and use tools like this all the time for copper tubing connections of all kinds (braze, solder, push connect, compression, press, flare, etc.)
@fervensmortis
Жыл бұрын
I just got into archery, and found out about this last night for cutting arrows, now its poppping up in my tech feed. The Internet really makes the world feel small ETA: there are also jigs for squaring off the end of an arrow with sandpaper for one of those clean off tools. Definitely worth looking into for work flow improvements
@MartinStrazynski
Жыл бұрын
Recently watched Adam Savage on Tested customize his own saw of a similar fashion. Had one of those, 'I recognize that thing' moments. 😅
@TheDraggos
Жыл бұрын
Same. I scrolled down, and my brain went: wait. Hold up. I saw that thing somewhere else. I'm happy to see someone that watches his content
@thomasclark8559
Жыл бұрын
Had the exact same moment. Seems like it's one of Adam's favourite tools, too.
@PhewChurz
Жыл бұрын
I was gonna mention Adam Savage's upgrade to his mini saw😂
@osman_malak
Жыл бұрын
I bought this a few years ago when I was doing a striker build. Best damn tool ever for petg and acrylic!
@cardsfanbj
Жыл бұрын
The one Paul got was from Harbor Freight, and they're selling it for $35 (and directly comparing it to the Jounjip). Looks practically identical except for the Drillmaster sticker on top.
@wille769
Жыл бұрын
I used that exact saw to do my first custom loop last winter (13900k/4090/SC Spectre/16mm acrylic tubing). It was absolutely aces, I can't imagine doing all those cuts with a regular saw and vice! It was the most useful tool in the whole process, without a doubt ( well, besides the heat gun, maybe).
@TheAwesomeGuy101
Жыл бұрын
Just a tip: Make a 3D printed handle to extend the short handle for additional safety, the handle is to short and too close to the blade. It will also add a lot of grip and control when you are cutting.
@danshimandle1938
Жыл бұрын
I had this same though. The handle could prob have a hand guard at the base too
@lynxxYaRly
Жыл бұрын
Bought one of these at Harbor Freight a few years ago. Fantastic for cutting my acrylic tubing!
@desdecardo
Жыл бұрын
Hey! Turn the pipe cutter COUNTER-clockwise so you spin and tighten at the same time!
@rescyn1190
Жыл бұрын
Better yet, replace it with a clamshell one.
@tevsil1
Жыл бұрын
If your looking for a maybe not inexpensive but definitely useful, cut anything and everything i recommend a portaband (basically a hand held band saw)and a table top stand. Or just a bandsaw in general.Super useful little tool, i use mine for everything at home, cuts metal, wood, and plastics of various makeups with no issue, platics get a little hot and melty but nothing a debur tool and sand paper doesnt fix.
@20Spartacus09
Жыл бұрын
This is also available at harbor freight for 35$. "DRILL MASTER 2 in. Mini Benchtop Cut-Off Saw"
@michaeld6545
Жыл бұрын
+1 Saved me a lot of labor on my build.
@Shadow0fd3ath24
Жыл бұрын
yup same saw, he got taken to the cleaners at $65
@my-yt-inputs2580
Жыл бұрын
I posted above I got that one from Harbor Freight.
@20Spartacus09
Жыл бұрын
Looks like alot of people have commented about the harbor freight version @@my-yt-inputs2580
@cameronford2278
Жыл бұрын
I have one of these saws for years. The tooth blade is all I use. I cut the neck off empty brass 223 casings to resize for 300 black out but that is much thinner material. Great video
@dividion8102
Жыл бұрын
That's a really cool little miter saw. My only concern with using something like that on plastic would be it getting hot and melting it if it stays in contact too long. For such short contact like you did at 6:30 it seems perfect. Don't cut yourself!
@mopioline65
Жыл бұрын
i'm kinda left wondering why he just didn't buy an actual miter saw to being with lol. either a cheap little makita or something similar would have done way better and been way more versatile.
@KenS1267
Жыл бұрын
@@mopioline65 Exactly. There are very good miter saws that aren't much more than that thing with much better motors. Once you find one you like, you get a couple of blades that will cut the materials you want and you're set. Further those more "professional" miter saws all have the safety features missing from that hobby saw.
@WhiteVaille
Жыл бұрын
I'm thinking a spritz of water might be enough to keep it cool on plastics. Or maybe IPA if the plastic is safe with that (IPA is great with aluminum, at least). I'm sure there's an ideal cutting fluid for the various plastics, with some Google-fu.
@droknron
Жыл бұрын
I considered buying one of these when doing my hard tubing build last year but all the ones I could find had very small cutting blades and some reviews said it didn't cut straight through the tubing they had. For that reason I instead got the hobby/craft electric saw from Dremel. It was about $120 USD, so not cheap but it worked perfectly and is only slightly larger than this saw in the video. Having said all that, the saw in the video looks great and has the right-sized saw to cut all the water-cooling tubing I'm aware of in existence. Good showcase.
@benenns6243
Жыл бұрын
You might want to try an angle grinder stand with a 4 1/2" grinder. They have the guard built in and you will have way more power to cut metal
@blendpinexus1416
Жыл бұрын
bro, thanks for the idea. i was thinking to try and get a drill powered one of these but an angle grinder stand is perfect. all i need to find is the right blade but harbor freight has a good selection.
@sainttrilby7171
Жыл бұрын
Use a face shield
@blendpinexus1416
Жыл бұрын
@@sainttrilby7171 or at least ppe eye protection.
@dravenm4
9 ай бұрын
I bought mine from Bottom of the Harbor (harbor frieght) 3 years ago. I use it to cut down brass casings for reloading ammo. Still works great, and that silver blade has been used the whole time, and I just recently decided to replace it even though it still cuts flawlessly. The wobble of the miter and clamp was my biggest issue, so I replaced the bolts and plastic knobs with metric Allen key hardware.
@ExiledStardust
Жыл бұрын
I never happen to be online when a video goes up, so this is a rare thrill for me. I've always wanted a little baby circular saw, even though I find full-size circular saws absolutely terrifying.
@Ulster-Fry-777
Жыл бұрын
my heart goes out you's guys across the pond with your 120v. here in the uk 240v rocks. plenty of torque. for big boy toys.
@kyle2575
Жыл бұрын
Definitely viable for non metal tunes. Can't wait to see how it works on an actual build. 👍👍👍
@ShockburnVR
Жыл бұрын
Yeah it isnt made for heavy metal
@ForgottenNavigator
Жыл бұрын
I bought one of these from harbor freight for cutting molding, small pipe, and small bits of wood for art. The thing has been absolutely amazing and it's nice to see another use for it.
@TomDetka
Жыл бұрын
You might want to try the toothed blade for the brass tube. Since its brass is non ferrous abrasive blades tend to clog and quit cutting. If the toothed blade is HSS (high speed steel) it will work great on brass and aluminum. Also if you want to cut down on the heating problem a little mist of IPA as a "cutting" fluid will boil off and take the heat away from the cut pretty well. Just do it in a ventilated location.
@thomasphillips885
Жыл бұрын
He did try that
@-Skratch-
Жыл бұрын
Thank you for doing a review on this. I have been hesitating purchasing it for my builds due to quality concerns. I just purchased it thanks to this.
@stewscotia
Жыл бұрын
for your softer tubing, I would just use a hose/tubing cutter. They look kinda like scissors but have a flat on one side and a large razor blade edge on the other, cuts tubing like butter. Wouldnt work on acrylic tho being hard plastic. They sell tubing scissors on amazon for like 5 bucks even. Can always try that, works more or less on the same principle as a hose cutter.
@tisaghchase
Жыл бұрын
Life is an ever-evolving journey of learning. It's awesome to witness you embracing new challenges and making strides. Your progress is inspiring! Just a bit concerned about the exposed blade as you reach in after the cut - a guard would be ideal for added safety. Keep up the great work, and always prioritize safety in your endeavors.
@benkonczal4584
Жыл бұрын
I've had this saw for years. It's great! My only improvement that I made to it was to fix a thin piece of plywood to the base and cut through it. That created a zero clearance bed and allows for more support on your part and tighter cuts.
@aaronmcneal1698
Жыл бұрын
I've used a "hobby saw" from Harbor Freight for years. I absolutely love it. This will be your new favorite tool.
@Neishy4AGTE
Жыл бұрын
Sorta hilarious watching computer guys around power tools, love you Jay.
@Dapper2000
Жыл бұрын
I have one of these and use it for cutting down Rifle Brass to make other calibers that are hard to find brass for and have cut well over 2000+ pieces and have had no issues and have been using the toothed blade that came with it.
@benwinson295
Жыл бұрын
I use the DeWalt cut off tool at work and it eats through anything. Could maybe 3D print a jig for it to cut perfectly square. its basically a handheld (and super powerful) version of this thing
@malejoj4548
Жыл бұрын
Exact same on I have a used on my tubes. Saved me a lot of time.
@xXhikashiXx
Жыл бұрын
This tool I had for years from harbor freight its so good and doesn't even really leave a rough edge on the cut
@TheZoenGaming
Жыл бұрын
The DRILL MASTER 2 in. Mini Benchtop Cut-Off Saw for @$40 USD from Harbor Freight is the craftwork chop saw that I recommend. With a motor capable of over 10,000 RPM it'll cut brass no problem... I know a few good ol' boys here in Texas who use it to cut rifle brass, so I knew it was good enough for my wood and pipe projects.
@TheJjjoj
Жыл бұрын
I bought mine for $43 with tax 5 years ago and have used it once a week for 16mm acrylic tube. They hold up perfectly fine. No need for a blade change or anything else. Best $69 I've spent for watercooling is this plus the primochill RFB bit.
@phlogistanjones2722
Жыл бұрын
I like this machine. It is not perfect but it surely does a fine job as you noted with the tubing. Basically.... "A man has to know his limits" kind of tool. I am VERY glad you gave it a try and that you shared this information with us. And yes, a pipe cutter is a HUGELY under appreciated tool by folks who do not use one with any regularity. Cheers!
@allenthompson4714
Жыл бұрын
I did something similar with a cutting wheel and a jig. Love it!
@Matt43
Жыл бұрын
Didn't know these existing... definitely piqued my interest, thanks for sharing!
@ro0140
Жыл бұрын
I have a Proxxon Chop Saw it is pretty expensive but it really works well and it is very precise and awesome build quality. I used to chop wood pieces to build old scale sailing ships with it. Never used it for plastic or iron did cut messing and some alu with no effort at all.
@interestingcan
Жыл бұрын
This is awesome lol, I picked one up a few months ago exactly for cutting tubing, and its been amazing. Was gonna send you the info but you beat me!!
@backwoodsmainah
Жыл бұрын
I love mine, Its seen a lot of use. I bought the Harbor Freight version. I use the regular blade to cut brass and it works fine.
@JimCook
Жыл бұрын
I've had a similar one for years, amazingly useful tool.
@relaxingreviewtech3670
Жыл бұрын
Really surprised you haven't used this sooner lol, I considered using this for my first custom loop but never bought it. Now I'll definitely consider it if I ever do another loop again 😅
@solocamo3654
Жыл бұрын
Bought this a long time ago when Kyle (BitWit) showed it to us (Harbor Freight version). It's been so useful for so much more than I bought it initially for.
@freewillywar
Жыл бұрын
@JayzTwoCents I am a Carpentry teachers aide, When cutting brass or Non-ferrous metal you use use fine too saws
@valveman12
Жыл бұрын
I bought this tool from Harbor Freight many years ago. It's very handy for multiple projects.
@kevinpayne3804
Жыл бұрын
Jay, I want to share a tip with you I learned from vinyl siding guys.. if you turn the wood cut blade backwards, then it's perfect for cutting plastics.
@fnbrier
Жыл бұрын
A year+ ago, I built my first water cooled system based on JayzTwoCents' "Beginners Guide to Watercooling! Easy to Understand Tutorial". I designed a 3D printed part that clamps the acrylic tube and uses the side of a Dremel SawMax to cut even pre-bent tube. I would have sent it to him I have no idea how. But it works great. Smooth cuts. No fracturing. I designed all my tubing with a single 90 or 45 and then could keep trimming the ends so it fits perfect. Haven't had a leak. Lots of tubes connecting the GPU, monoblock for the motherboard, memory, (2) 360 radiators, and the reservoir.
@sebastianlagerbladbergsman1361
Жыл бұрын
Felt like an old tv-shop commercial, cut anything in one, two, threeeeeeeeeeeeeeeeeeeeeee seconds! Look how good it is 😂 Great content as always jay.
@F-Bomb313
Жыл бұрын
That red plastic piece you were asking about is to stop the saw from cutting your desk when you push the handle down, limits saw going through the slot on the base.
@tacoflavoredtoys4870
Жыл бұрын
Love my micro cut off saw, I made so many miniature jigs for mine, helps to reproduce miniature furniture
@shadowpaw2873
Жыл бұрын
I use a battery powered drill that has different attachments. Circular saw, jigsaw, impact drill, and sander. The saw works great when storms knock a bunch of tree branches down or I need to cut something like tubing. I don't have the space for a dedicated table saw so it's great having 1 device to cover all those tools.
@only1muppet
Жыл бұрын
The design of that saw and the aesthetics remind me of ones I’ve seen in 1970’s model magazines I read as teen in the 80’s. Even it having brushed motors and belt drive are things I remember.
@HiddenRamza
Жыл бұрын
Hope you find something you will love because I can't wait to see your custom builds start rolling in
@devitalized
Жыл бұрын
2:06 - Jay so excited about the mini chop saw, he starts calling everything a chop saw. Chop Chop!
@davybloggs1564
11 ай бұрын
Looks like a good, handy little tool. I believe the red button on the handle top, is to lock the shaft while you loosen/tighten the blade.
@my-yt-inputs2580
Жыл бұрын
I got the exact same saw under a different name from Harbour Freight years ago. I use it to chop down 556 brass to make 300 BlackOut brass.
@db_37205
Жыл бұрын
I've been using a tube cutter since the 1970s - it uses a circular cutting wheel and you set the pressure with a screw, and rotate it around the tube, with a perfect cut
@bighairycomputers
Жыл бұрын
That is the most adorable chop saw I have ever seen.
@shotokanads3325
Жыл бұрын
I have used this type of tool an my last two builds with both PETG and PMMA and its great. If you are using 12mm or 14mm its OK, however, I have used it with 16mm tubes and had to turn the tube in the vice to get it fully cut which leaves an uneven end. Great for 14mm and below though.
@nichetcher1
Жыл бұрын
Not gonna lie I’ve had one of these for years, and the amount of work I accomplish compared to the amount of work that you accomplish is minuscule! Thanks for sharing the tool, and also thanks for being stubborn because it showed us many aspects of your personality subsequently LoL!
@iJamezz
Жыл бұрын
I bought one for my first water cooling build. It's amazing. No way i would of been able to do the build anywhere near as well or with the same amount of materials. Love this tool. I ended up with two of them, as one got lost in the post and they sent another, then it showed up and they let me keep both lol lol
@Cheeseypoofs85
Жыл бұрын
i didnt know these things existed... its cool as hell. if i ever go custom loop, im getting one of these
@donnienall626
Жыл бұрын
I've been using these for a long time to cut down rifle brass, they cut the brass great. and Harbor freight sells one and the blades as well.
@phillipzan2005
Жыл бұрын
I started using that tool because of paul's hardware and it works great...
@mtdickey
Жыл бұрын
Getting a cordless bandsaw will serve you well. There are tons of different mounts that can turn it into a benchtop bandsaw or chop saw.
@richardrassat614
Жыл бұрын
I made 2 cuts with the corsair kit you recommended. After that went to the garage and pulled the .300 blk out jig off my hobby saw and made all my cuts. makes straight cuts and way faster. They also have it at Harbor freight for around $50
@Chadly1179
Жыл бұрын
I saw that thumbnail and just about jumped out of my pants. After going through so many other tools I finally picked up that exact saw from Harbor Freight and it was a game changer! Saved me so much effort when cutting 14mm OD tube on my recent build.
@agilmaharramov9014
Жыл бұрын
I would honestly go with a smaller miter saw (like a 7 1/4") and slap a finish blade on it, nice fine cuts, with adjustability and most importantly, power
@doesntwork549
Жыл бұрын
Quick info for you jay. Acrylic and PMMA is the same stuff. PMMA is the technical term for Acrylic and stands for polymethyl methacrylate.
@striigii
Жыл бұрын
I have one of these that has hours of cutting brass casings down. They are surprisingly long lasting.
@Grey-Troll
Жыл бұрын
My ALL TIME FAVORITE tool for just about any PC building or other small device repair or disassembly is the precision electric screwdriver. I personally own the Jakemy model: JM-Y03 which I carefully selected simply due to the swappable 14500 battery (AA sized LI-ION) which I already have a few of for my pocket flashlight. Soooo nice for taking apart laptops or anything else with an absurd number of screws! By the way.... if you 'bump' your saw blade on the material you're cutting instead of just putting steady pressure on it you'll heat up the material and blade a whole lot less than you are here in the video. Not sure that would actually work when cutting metal, but it definitely would with the other tubing! Also its a good idea to clamp your screw head instead of the 'drops' (carpenter slang for the discarded pieces ) and the blade will remove that little part where you were showing it had broken off, however I can see how that might be tricky without making something to actually hold the screw at 90deg in relation to the blade... but a couple of short blocks of aluminum shorter than the screw you're cutting would likely do the trick by the way it looks. You'll definitely learn all the tricks though after using it a bit 😁
@winstonwright3613
Жыл бұрын
With the V-shaped notches of different lengths in the handle, I believe it's spring loaded and can be pulled and rotated to different positions to either lock out the safety (how you had it) or to force the safety to be pushed before lowering. Can't really tell. But ya... With a rotating blade right there... That's not much safety either way. 3D printing one would work if you made it to where it hooks around and covers the switch also so that it can't be started without removal. Interesting tool.
@crr175
Жыл бұрын
When I was a kid in the 80s I had some small hobby tools from black and decker if I remember there was a saw drill press and a sander. All were under powered but worked for building train sets
@FrankConforti
Жыл бұрын
I bought one of those saws in 2011-ish for $20 (sale + 20% off). I still use that same saw for shortening the neck of reworked brass shell for the 300BLK cartridge. I’ve probably cut 500-1000 or or more over the years. Works like a charm. The brass thickness on the shell is minuscule compared to that heavy duty brass tubing demonstrated in this video. You can’t force the saw through the material or else it’ll bind and spit out that little spikey piece at the end. I’ve also used it on plastic, however I did have to turn the blade around much like house siding installers do with vinyl siding. For $27-$35 this thing is a bargain for what I need. Heck, I have a second on somewhere around here I’ve never opened as I thought, like other HF tools, it would prematurely break. Nope, first one still works.
@captainclaytonic7283
Жыл бұрын
Shows how having the right tool for the job saves time and avoids trouble.
@WilliamPayneNZ
Жыл бұрын
Great idea. With how popular wood work and stuff is I imagine there would be a more professional small saw available somewhere.
@tinny6065
Жыл бұрын
MQL lubrication is your best friend for cutting metals. It helps it cut easier and extends the saw life.
@jamesbarlett246
Жыл бұрын
I like videos like this because we can learn how to do things better together.
@sam6906
Жыл бұрын
I saw @snaxangaming use this almost 2 years ago on her first watercooling video and bought one then. It makes things so much easier.
@novakai1097
Жыл бұрын
She uses a better one now that is half the price
@brettsmith4695
Жыл бұрын
I went to Harbor Freight and bought theirs for my last build. Absolute game changer in my humble opinion
@NoHope_
Жыл бұрын
fyi, there's a tool at harbor freight that is basically the same thing, 10,500 rpm instead of 7800rpm and is only $35, might be a better buy for most people. Its called the "DRILL MASTER mini cut off saw"
@Fahrenheit38
Жыл бұрын
I keep thinking my water cooling hobby is over but vidoes like this make me wanna jump back in
@keyzswat
Жыл бұрын
This is one of my favourite videos from Jay in a while and most have videos have that react from me, but the fact he's bought a 'chinese generic item' Jounup or something l, $65 not necessarily cheap. Love that he still relates to the cost of things for I imagine himself and the team but also for the viewer. As there is no way he couldn't find an American company or even home depot that has this. Yet he got it from Amazon. And he is doing a full ass test. He has added something new to the shop and by look it will be used for plastic tubing. I bet this moves on and evolves over time but this got the ball rolling... 👍🏻🙌👏👏 bravo this man. For going all out with a Chinese brand and hoping I'm sure for the best and not just bashing it. And I hope it does evolve.
Пікірлер: 1,3 М.