We run 2 Velox printers from SPSI. They run 3 heads, 2 cmyk and 1 white. Printhead alignment on both printers was super simple
@justanoob7030
10 ай бұрын
I really liked the video! Explained your process of figuring the best DTF printer for your needs as well as gave some super helpful tips on how/where to source equipment and consumables. Thank you for sharing your experience. I look forward to more videos, tips, and tricks. Wishing you the best of success.
@magicmanny72
11 ай бұрын
I love this content. As a small home business from my garage.....i love this video and thanks for sharing.....
@leviteapparel
11 ай бұрын
😂This was amazingly satisfied. Lots of good information 👍🏿 🎉🎉
@MarcoTheHEXican
10 ай бұрын
New Sub, appreciate your input and honesty on the whole subject. Bravo!❤
@kimgreene854
11 ай бұрын
I purchased my Audley from the same place. I just got it set up but haven’t printed yet. You are very correct about the support not being all that great. It’s not for a lack of trying but the language barrier definitely gets in the way. I would love some help on making sure my settings are right for my first print as well as clean up afterwards. Thank so much for your videos
@magicmanny72
11 ай бұрын
Congratulations on your printer... I am in the process of getting one my self
@StewTheTshirtKing
Ай бұрын
How is it working? I’m wanting to purchase but i don’t know anyone who has one
@StewTheTshirtKing
Ай бұрын
How is it working? Any major issues?
@dcondorcbr
11 ай бұрын
Awesome setup! Congrats..
@ameliatan0309
11 ай бұрын
Can you do a printer maintenance video? Whether it's daily or weekly.
@kimgreene854
11 ай бұрын
Yes, please.!!
@theawkwardturtle
7 ай бұрын
Awesome video! I have a smaller XP600 DTF printer with a similar setup (powder shaker + oven). The question I have is how often do you need to refill the powder? For mine, the powder ran out so fast that I had to keep my eyes out every 5 minutes or so. I just can't multi-task while the printer is running.
@missydsdesigns9733
10 ай бұрын
I'm also very curious...with my current printer, the film goes at a downward angle, there's not slack where the printing takes place. I noticed on your videos that it seems like it's looser close to where the print head lays the ink. Does this not result in more printhead strikes? With the price of those print heads, I definitely don't want to have that issue.
@stephensedgwick605
11 ай бұрын
You talk about registration - some of us understand "registration" however as you talk about this I don't know if you have ever completely explained this (brushed on this slightly in video's but not covered it) - might want to go into this in a future episode. My 4 head printer crate has been opened but not unpacked - my shop hasn't been finished but should be at the start of Nov (crossing fingers) so shortly after that I will see how it goes. Been missing daily updates here.
@chooseams
11 ай бұрын
Great point. Will address soon.
@nathanwelter4033
8 ай бұрын
loved the video!!
@toby401
10 ай бұрын
new subs, thank you for sharing.
@catchthetruck6173
11 ай бұрын
Great content as always! I have been going through hell with Ricoma dtf printer you made a great move dealing with the manufacturer because even Ricoma all the tech help I ask for they always say wait we are waiting for china smh don’t even talk about the price tag and no return at all policy sucks gambling with these printers
@chooseams
11 ай бұрын
Wow that’s disappointing to hear…. Especially that they themselves were dealing with China and not even possessing the knowledge first hand.. very interesting. Thanks for your comment and watching
@deefit3797
11 ай бұрын
So that’s a Ricoma??
@chooseams
11 ай бұрын
The printer in my video as I mentioned is an Audley
@TmCkellar7
11 ай бұрын
Great info!! Are you still thinking about doing the audley DTF course?
@chooseams
11 ай бұрын
Yeah, I haven’t found the time to edit it all down and do the A roll content for it. Working on getting it out before Black Friday.
@TmCkellar7
11 ай бұрын
Awesome. I decided to take your advice and just have my prints done by a local shop he is normally next day service and we can pick up so much easier. But still interested in checking out the course for future purchase of the printer
@becomingalulabro4536
7 ай бұрын
Hey, what interface do you use for your website? Specifically for people to customize designs right on the site and then submit them to print? I'd love to use that for our custom apparel business.Just from the look of your website it looks like it might use a WIX backbone, I wonder if that's available for a Shopify store...
@StraightOuttaContent
10 ай бұрын
Hey man great video, we’re right here in Cypress. We would love a chance to come film the shop one day. We love showing local DTF businesses here in Houston. With that said, did you ever consider the Mimaki DTF printer?
@chooseams
10 ай бұрын
I asked a while ago if anyone had any experience with Mimaki DTF printers but I never heard anything. I think they’re too new to DTF to trust at the current moment. I’d like to see more case studies using these machines vs an Audley or China printer. Plus the ink experience just seems off putting idk, I have to look into it further I think.
@StraightOuttaContent
10 ай бұрын
@@chooseams That’s understandable. As you can see in our videos, we teamed up with them to help answer all of those questions and concerns for people. We grew our company with Audleys but once we got to really work with the Mimaki we saw the major differences. Their ink is proprietary and made by them. Which means consistency and it’s always available. As brokers we get all items a lot closer to MSRP vs other companies like DTF Super Store. Also, if you ever wanted a demo, the Mimaki showroom is right in Irving. You should come check it out sometime.
@HappyGinger639
11 ай бұрын
My two head Audley just arrived and I can’t wait to get it up and running.
@beautifullyembellishedllc6311
7 ай бұрын
How is it going if you don’t mind me asking
@dandeneely
2 ай бұрын
What kind of computer do you use for the printer and who made you website? We have a 2 heard we haven't started up yet.
@chooseams
2 ай бұрын
Just a basic computer, was like $400 at Microcenter. We developed our website in house ontop of a few different frameworks using a lot of custom code to get it to where it is now.
@calvintucker239
6 ай бұрын
How difficult was it to match up the printer with the proper software? Did it come from Audley?
@chooseams
6 ай бұрын
Check out the video on my channel regarding maintop vs digital factory
@ChocolateCoaDrip
9 ай бұрын
😂 Hello hi great channel amazing Video. Just subscribed 🎉🎉🎉🎉#985
@rooseveltjones3439
11 ай бұрын
Looking to get a 24 inch dtf printer,Thanks a lot
@bluedoggraphics1743
11 ай бұрын
What do you do for your printers during the weekends? Do you lose your Saturday and Sunday by having to coming to the office to run the machine to keep from drying out the ink in the printheads?
@chooseams
11 ай бұрын
Good question, I use capping solution which allows us to get away with not running the printer for a few days.
@premier1printing
3 ай бұрын
@@chooseams Do you have a detailed video on that process?
@StewTheTshirtKing
Ай бұрын
@@chooseamswhat is capping
@catchthetruck6173
11 ай бұрын
Question: why do they hover the hose with the suction like that over the heater instead of just directly connecting it?
@chooseams
11 ай бұрын
It’s my understanding that you don’t want to suck the heat out and only want to suck the fumes. So balancing act. Could be wrong tho, it just says 105mm away from heater on the ventilation tube.
@StewTheTshirtKing
Ай бұрын
What software do you use?
@StewTheTshirtKing
Ай бұрын
Can we use flexi rip software?
@jonbelize
11 ай бұрын
I ordered a 4 head audley and currently in customs waiting on my broker. I will let you know how it goes
@jonbelize
10 ай бұрын
I installed the 4 head audley. It was very difficult as there is so little space in the printhead carriage to work with. I wouldn't recommend it to anyone who hasn't installed printheads before. As far as printing goes. The colors are beautiful and the speed is unbelievably fast.
@StewTheTshirtKing
Ай бұрын
@@jonbelizethe printer head doesn’t come installed already?
@jonbelize
Ай бұрын
@@StewTheTshirtKing No, it comes separately.
@StewTheTshirtKing
Ай бұрын
@@jonbelizegotcha. I talked to them earlier. They said i have to install it. Have you had any major issues?
@premier1printing
3 ай бұрын
What is your ink supplier?
@chooseams
3 ай бұрын
Audley
@dominicmosley6456
11 ай бұрын
How do I get intouch with Near Han?
@magicmanny72
11 ай бұрын
Yes that s would be nice.
@chooseams
11 ай бұрын
Reach out to her on Alibaba.
@MrVidito89
11 ай бұрын
How long does it take to get your supplies from china.
Пікірлер: 58