For someone that knows zero on welding, churchy nailed it in a very easy to listen manner
@Turbo_Tractors
4 жыл бұрын
10/10 video. Churchy knows his stuff
@tac0o0o0o
4 жыл бұрын
Whens churchy's rig rundown coming!
@BLUEY4X4
4 жыл бұрын
I find your videos way more entertaining than any other 4wd shows 👍
@cooperquinn8897
4 жыл бұрын
Same
@EVERYTHINGOVERLANDANDUNDER
4 жыл бұрын
great video, appreciate the run through with your mate on his welding and the detail of explanation
@elliot7179
4 жыл бұрын
This welder needs his own channel , explains everything so well
@slowboat6021
4 жыл бұрын
thanks Churchy for the in depth welding tips, when I need any SS welding I'll bring it to you.
@LittleStrongBoy
4 жыл бұрын
3:30 looked like you were gonna use the cardboard box as the air box😂🤭
@bradpatterson1949
4 жыл бұрын
Yaas
@betterdenu999
3 жыл бұрын
A confederate flag and a bob marley picture in the same shed is rare the fact it’s an Australian shed makes it even rarer
@jonoj7666
4 жыл бұрын
Excellent explanation on the tig Churchy 👌👍 Another great vid lads, will be sad to see you leave WA 😥👍
@ndirangugichuki6260
4 жыл бұрын
That welder knows his stuff.
@Perspari
3 жыл бұрын
I absolutely agree you need to have ATDC to do welding, well said
@evloftis4143
3 жыл бұрын
he did a really nice job on it !!!
@aukanmeister
4 жыл бұрын
I use inch wide strips of copper plate, glowed soft to use for backing odd shapes.
@mattbender3197
4 жыл бұрын
Great video guys especially when it comes to the tig settings, keep up the great content 👍
@agentdsmith
3 жыл бұрын
great job!
@gav8379
4 жыл бұрын
Crackn vid mate... really enjoyed the detail in this one... cheers
@kaydenoravec1783
4 жыл бұрын
Well done Sam keep doing what you are doing
@Jezzabale
4 жыл бұрын
Churchy needs his own channel for sure
@ChrisZBr0wn
4 жыл бұрын
Try some SolarFlux on the backside of the hard to back welds. It’s a powder that you mix with Methanol to make a paste. Protects the backside and it was cheaper than purge or having the sugaring rot out because the chromium is burned out.
@boostedbuiltgarage
4 жыл бұрын
Nice job Churchy!👌
@bradleysmith2790
4 жыл бұрын
Well done boys . You both work well together. Keep the vids coming 👌💪
@henleyfarrer2908
4 жыл бұрын
Let's see some more welding stuff. Keep up the good work boys
@nooki1102
4 жыл бұрын
Top episode guys.. Really well done
@killerkoala2518
2 жыл бұрын
Awesome video and good too see the unimig Jassic acdc 200 getting it done
@JSFTouring
4 жыл бұрын
Awesome video mate! Churchy sure knows his stuff! the methods and the science behind it! was a little sad we didn't get to hear the dual stains running though ;( next time!!
@4x4CampingandAdventures
4 жыл бұрын
Great episode Sam I learnt heaps about welding to thanks to Churchy. Pretty keen to hear the intake noise with both snorkels going.
@stuartkcalvin
4 жыл бұрын
Great vid Sam and Churchy, thanks.
@davecorreira3886
2 жыл бұрын
Thanks for sharing!! Curious about having your snorkel tubes facing rearward, do you have concerns of a venturi effect taking place?
@dougdarren3418
4 жыл бұрын
Love you the work you have put into it mate enjoyed this video especially t the way you guys explain the job details of this particular project beautifully done
@dougdarren3418
4 жыл бұрын
@@speyles I've cone to an agreement with my self when I obtain my self a new ute I'll have you design my snorkel and air box lol
@Declanbean44
4 жыл бұрын
Easily the most helpful and useful video you have made....apart from the built not bought conversion eps. Keep this stuff coming mate love it
@elrud5964
4 жыл бұрын
Good trade tips in this, take notes people!
@thatsgangsta2450
4 жыл бұрын
Chrurchys a good teacher
@bencallahan1412
4 жыл бұрын
Very professional boys
@lettucemedia8023
4 жыл бұрын
Loving the high viz
@MrKdellis123
4 жыл бұрын
Difficult choice between the types of air filters, like K&N and stock paper type
@vtwindad1549
4 жыл бұрын
I didn't realise that people from WA actually have a slight twang in their accent compared to Victorians! how strange
@tgaero1179
4 жыл бұрын
Where’s the HQ Build at mate? 💯 loved that video
@shaunmcconnell9212
4 жыл бұрын
Churchy needs a KZitem Chanel👌
@AlbiesProductsOnline
4 жыл бұрын
If you pick up a cheap 3 in 1 plasma/tig/stick unit that only does DC tig you can do aluminium With helium instead of argon but it will be a deeper structural weld not as parity but will do the job
@geeransfield1007
4 жыл бұрын
Good work fella's
@chrischapman1522
4 жыл бұрын
Great Vid I use too love TIG welding S/S. Good info . Did Churchy mention the differince between electrodes?
@Churchys_adventures
4 жыл бұрын
So much info and not enough time, cut alot of info and unfortunately forgot to leave in cup/electrodes 🤦♂️ Tig is such an in depth subject that it is very hard to sumise off the cuff
@tajwilkins7896
4 жыл бұрын
Where’s the best/cheapest place I could get a nice snorkel
@150adventures
2 ай бұрын
Does anybody have the video of snorkel one going in?
@woondoon4x4adventures36
4 жыл бұрын
Let's go new episode
@antecutuk9127
4 жыл бұрын
This Chanel converted me into a 4wd loved
@jaybajan
4 жыл бұрын
sickkkk built i must say
@umw901
4 жыл бұрын
Awesome content
@malachiverdon4113
4 жыл бұрын
Should of purged the pipe to prevent sugaring
@Churchys_adventures
4 жыл бұрын
Purge is for paying customers 😂
@coenstant
4 жыл бұрын
Luv the greta sticker.
@jakebarbagallo9129
4 жыл бұрын
Heard some livin 4x4 intro music in there
@ToyBJ
4 жыл бұрын
Damn !! I’m impressed mate 😎 does he do home/cash jobs , exhaust ?
@bobbymulwee7641
4 жыл бұрын
Churchy as a guy from the south in the States I'm happy to see the Rebel flag.
@reginaldtapiwatakundwa1820
4 жыл бұрын
When are you doing a rig rundown on the Mega 6x6??
@clancyslater9245
4 жыл бұрын
CAD cardboard aided design
@andreweliott1311
4 жыл бұрын
How has churchy mounted his power tools to the wall?
@ashleyburgess9063
4 жыл бұрын
Pity about the horrid flex tube
@seanrichard-preston6088
4 жыл бұрын
What is the best snorkel for performance?
@jeremerywall6308
4 жыл бұрын
How do you find the belts? As I'm trying to find one that won't squeal on start up. Thank.
@chrishorsburgh7054
4 жыл бұрын
So the ally does the same as solar flux?
@jetmorran7858
4 жыл бұрын
Churchy need his own channel
@thomasblanch7161
4 жыл бұрын
When is the comp truck coming back
@adamabela2787
4 жыл бұрын
Can I ask what welder he is using ?
@hendrikkruk7268
4 жыл бұрын
Is churchy a boiler maker??
@rhysbertrand8903
11 ай бұрын
Shoulda taped up the holes and taped a lid on it to purge it no?
@rhysbertrand8903
11 ай бұрын
Does look wicked tho
@fourty11
4 жыл бұрын
I love this shit!
@NoDiarrhea007
4 жыл бұрын
When is the test to show the difference? 😊
@dpdog88
4 жыл бұрын
Says first thing first - cuts to ad break
@ethancrooks9338
4 жыл бұрын
Third love the videos Sam
@jackpedersen4626
4 жыл бұрын
You sould do a rig rundown on josh GQ
@eastgaming2513
4 жыл бұрын
Hey sam are you gonna be coming to the Melbourne national 4x4 show this year?
@eastgaming2513
4 жыл бұрын
Sam Eyles mint 👌👌
@amos5543
4 жыл бұрын
What pulse frequency was churchy using i got myself a tig and find it hard to get the pulse set uo right
@Churchys_adventures
4 жыл бұрын
48-52 peak amp 10 base amp 40% on time 60% off 2pps 3.2 thoriated tungsten (red tip) 8/12 cup and gas lense (bigger is better) 1sec pre flow 3-5 second post flow High frequency arc start
@danielsundberg1977
4 жыл бұрын
Pretty much!
@AussieDazza
4 жыл бұрын
This video is farking awesome . 👍
@mickfbr
4 жыл бұрын
Yewwwwwww! Love ya work Churchy ... fk the haters haha...
@AustinLowe
4 жыл бұрын
Hey mate can you tell me the settings you used for pulse on the stainless?
@Churchys_adventures
4 жыл бұрын
48-52 peak amp 10 base amp 40% on time 60% off 2pps 3.2 thoriated tungsten (red tip) 8/12 cup and gas lense (bigger is better) 1sec pre flow 3-5 second post flow High frequency arc start
@MrFaTaL02
3 жыл бұрын
Great lesson from church here about welding how ever if I where you Sam I wouldn't be putting up videos with a confederate flag in the background, not a good look.
@bambertron1307
4 жыл бұрын
What's churchy's day job??
@peterbarber7613
4 жыл бұрын
Don't go into NSW with the pod filter.Big no no
@Andy_Pandy5
4 жыл бұрын
Liked it
@liamcooper5202
4 жыл бұрын
Tell churchy to give up the snipper. Snipps like a bloody muppet. Glad he doesnt TIG like he snipps 🤣🤣🤣
@Churchys_adventures
4 жыл бұрын
I have an edger which I do on the path ways but had to edge with the snip around the deck because I have river stone around the edge so gimme a break 😂
@liamcooper5202
4 жыл бұрын
@@Churchys_adventures haha what? you cheat with an edger?! The outrage 🤣🤣🤣
@Churchys_adventures
4 жыл бұрын
@@liamcooper5202 what's the alternative?
@liamcooper5202
4 жыл бұрын
@@Churchys_adventures easier to show a pic than to explain how to stand but there is an easier more controlled way to get the same result.
@kadeberryman4002
4 жыл бұрын
Go 4wding with 4wd action
@johncampbell4498
4 жыл бұрын
Hey buddy, the problem you have with the airflow .... i will bet on it - is that snorkel design with the swirler is costing a lot of pressure drop at high flows, the pressure loss of a swirling/spinning up flow increases losses really alot (it follows a or on factor x quadratic law) - if it is 4inch dia. and you have no sharp bends, then it should be fine without any swirler. Go ask the supplier if they have actually flow tested it at the engine flows you are running, if you tell me the Dyno power and the AFR then we can work that one out. It might look cool, but unless you are actually driving across a river, a snorkel is at best a useless thing and like yours where an aerodynmics engineer has not designed it, then it is just a stupid penalty just another aftermarket money con. I am 20 years working as an engine flow simulation engineer, and it is incredible how these design flaws still make it thru where no effort is taken to either do proper simulation or proper testing. My guess is that at some moderate anticipated airflow teh swirl might have been considered to help, but the behaviour runs away at higher flows. If you are running a diesel engine it must breath about +50% more air for the same power as a gasoline, perhaps the supplier got their calculations messed up or test flow wrong. Generally Swirl is a Loss feature and you pay for the penalty if it serves some particular purpose, e.g. centrifuging particles in a cleaner/separator.
@kyletaylor13
4 жыл бұрын
As an american its weird and little jarring to see that confederate flag in the background...
@okbruhh
3 жыл бұрын
Then there is Bob Marley on a huge poster
@personlikeu
4 жыл бұрын
Why don't you do the job properly, give it one snorkel per cylinder and call it the Octopus?
@sooty4460
4 жыл бұрын
Just me or did was he talkin bout cocaine?
@Julius.H23
4 жыл бұрын
11:56 my whole attitude towards you guys dropped as soon as I saw that confederate flag (white supremacy). Hope that flag isn’t up just because you blokes believe in that white supremacy shit because that shit just isn’t cool.
@Churchys_adventures
4 жыл бұрын
It represents heritage not hate. It was a gift from friends in the South. I do not support white supremacy and the assumption that that's all the flag represents is in-correct.
@yermoffroad
2 жыл бұрын
@@Churchys_adventures it may not be "all the flag stands for" but when it's flown next to the nazi flag by the kkk and has been used by almost every single pro segregation group since the Jim Crow era in the us as their flag, you should see why most Americans think this flag is a symbol of hate. I'm not necessarily one of them but your defense of flying this flag on your wall could be used with the nazi flags. They do represent more than just white supremacy, and thinking so is incorrect.... Ps I am aware how old these comments are. I do know I'm insane for wasting my time commenting on one this old.
@giacomoone4773
4 жыл бұрын
Confederate flag 😂
@badcommentbot8349
4 жыл бұрын
Dual snorkels lmfao 😩 May as well put dual Mack truck mufflers on there ,1000 lights and 15 aerials bro . So doushe ,sorry
Пікірлер: 114