Thanks for the tip. I found the same calcium junk in the faucet. Cleaned it and you saved me about 200. Happy wife..... Now off to my slide sync duties.......
@JouppiOutdoors
Ай бұрын
Awesome! Thanks for watching!
@kevinbuckley4231
5 ай бұрын
Check the mixing cartridge inside the faucet itself. You should be able to remove it fairly easily and clean it. --Also, a plumber once taught me to turn off the water .. remove the cartridge, then turn on the water again for ~5 seconds. This will blow full pressure water and clear everything. (And make a mess, so do this with two people, one to turn the water on, another to guide the torrent of water somewhere.
@JouppiOutdoors
5 ай бұрын
Great suggestion, I might give this a shot! Thanks for watching!
@f150bft
4 ай бұрын
Check the anode rod in the water heater...if you haven't already. The issue may have started there.
@JouppiOutdoors
3 ай бұрын
Thanks for the suggestion. Our water heater does not have an anode rod though. I think it’s due to many RV parks being on well water and just years of gradual sediment buildup.
@roberttaylor8261
4 ай бұрын
Another thing to check is another open valve like outside shower turned off by the head and the mixing is still on will let water flow slow
@rickstills6716
5 ай бұрын
We have low water pressure on both hot and cold at our kitchen faucet.
@JouppiOutdoors
5 ай бұрын
The sediment buildup could be in the combination valve. May still be able to disconnect the water lines and blow out the hot & cold side.
@roberttaylor8261
4 ай бұрын
There is a check valve on the exit side of hotwater tank. It will stick half closed!
Пікірлер: 10