Thanks to you and Braden, I am building my first punisher right now to fly next year. It's a sweet rocket! I can't wait to fly it!
@peraltarockets
Жыл бұрын
I ordered my first Punisher during Wildman's annual sale. Looking forward to building and flying it.
@mojaverockets
7 ай бұрын
Longer rockets are for longer motors... Regarding rocket shipping/transport, had a team from the Middle East cut their 6" x 10' rocket into 4 pieces and the nose cone to fit in each team member's luggage and no problem. Unfortunately, what problems you encounter at airports are often what TSA people you get.
@bunkermonkey9
9 ай бұрын
order my 3" during the Wildman sale and cant wait for it to get here.
@rjenkins133
Жыл бұрын
Bought a 3" punisher at airfest this year. Can't wait to fly it
@baja221
Жыл бұрын
May finally be convinced to get a punisher. Then I can be like the cool kids. Rocket cat realllllly wants to be a youtube star
@the_rocketchannel
Жыл бұрын
He thinks he's a star even without youtube! 😂
@peraltarockets
Жыл бұрын
Orange Cat Good.
@baja221
Жыл бұрын
SCS, Space Cat System
@RocketVlogs
Жыл бұрын
Tell Nigel I said wassup
@JimmyZeroMOA
Жыл бұрын
Hi! I've been looking at the 2.1" punisher sport lately as a first attempt at a fiberglass rocket and wondered if you had any 29mm motors you'd recommend. I'd like to start moving from model rockets to high power. Love the channel so far! Merry Christmas 🎄
@the_rocketchannel
Жыл бұрын
That's the only size Punisher I don't have, but I really want one! Aerotech 29/180 reloads would be really great in that rocket. H128W is a classic as is the H238T. If you aren't certified yet, the 29/120 case has a few good G motors that I used to fly all the time! Of course there are a variety of DMS motors available too if you don't want to buy any motor cases. I will recommend this hardware set that will allow you to fly any Aerotech 29mm motor. wildmanrocketry.com/collections/29mm/products/2918sc
@dalepriewe6037
Жыл бұрын
Thanks for the videos your doing great
@EJM-s2d
5 ай бұрын
Taylor, How did you set up your avionics bay? Did you use threaded rods and a deck? What types of switches did you use and what was their placement? (Are there markings on the Ebay end plates suggested to be used for any threaded rods? Thanks! Ed
@the_rocketchannel
25 күн бұрын
Sorry, I’ve been absent from KZitem for a bit! I build my rockets with a single 1/4” threaded rod. I mount my electronics on a sled that fits in a 3” an bay that way I can put the sane sled in and rocket 3” or larger. I use the twist and tape method for my switches. Switch wires coming out of one of the vent holes. The marks that come on the bulkplates are what a lot of people use for allthread spacing, I’m just not a fan of that method.
@normrubio
10 ай бұрын
Yes.
@garyschricker8425
Жыл бұрын
I've been looking at the 3" Punisher as my next rocket. Your youtube presentation convinced me to get one. However, I have been playing around with Open Rocket and it appears the Punisher is very tail heavy on most motors with a stability of less than one even when adding some weight to the nose. The rocket seems to like the bigger Level 2 motors. Please advise, Thx.
@the_rocketchannel
Жыл бұрын
Punishers are plenty stable at around .6 calibers stability. For two grain 54s I’ve found it likes higher average thrust motors like blue Thunder, white Thunder, etc. That being said, Myself and plenty of others have flown white lightning 2 grains, I’ve just noticed it has a bit of a wiggle off the pad if there’s any wind. I personally wouldn’t add any nose weight.
@the_rocketchannel
Жыл бұрын
Three grain 54s and above is where this rocket shines imo!
@empoweryou1
Жыл бұрын
Hey Braden, I like the channel. I have some used rocket hardware,etc that I'm trying to find a home for. Would you be interested in any of it? I too live in The KC area.
@the_rocketchannel
Жыл бұрын
Thanks! This is actually Taylor Jessee. Screen name rings a bell - Blair C? I would indeed be interested in those type of things. Shoot me an email and we can discuss. therocketrychannel@gmail.com
@empoweryou1
Жыл бұрын
@@the_rocketchannel That's me. Will do.
@the_rocketchannel
Жыл бұрын
Awesome. Let me know.
@temporarychannelname8561
Жыл бұрын
Have you ever gone drogueless with a punisher? Or would this not be the best idea as when it splits one half would weigh a lot more than the other?
@ROVA00
Жыл бұрын
Where do you launch out of Kansas City? I live in Texas and here is where I got into rocketry but I grew up in KC and it'd be cool to go see a launch day around the area when I go back.
@the_rocketchannel
Жыл бұрын
I fly with the Kloudbusters in Argonia, KS. There isn’t a HP club anywhere close to KC.
@ROVA00
Жыл бұрын
@@the_rocketchannel thanks for your response!
@dalepriewe6037
Жыл бұрын
Now that you have convinced me I need to add a 3” punisher to my wildman collection what size drogue chute should I use?
@the_rocketchannel
Жыл бұрын
12” drogue is what I would recommend! Just enough to keep the booster from stabilizing on descent.
@garyschricker8425
Жыл бұрын
What brand and size parachute are you using for the 3" Punisher?
@the_rocketchannel
Жыл бұрын
Currently I’m using a 36” LOC chute that came with my mini Magg. A 36” regular or 45” thin mill Top Flight is what I recommend if buying a chute.
@WalkerSmallEnginePerformance
Жыл бұрын
I launched the little Punisher (SS dual deploy version) on an Aerotech I280 DM. Lost it. Flew out of sight and no idea where it’s at. The replacement is almost done. kzitem.infoxfdfIvCvtRI?feature=share
@the_rocketchannel
Жыл бұрын
Probably need a tracker on anything bigger than an H on that one! I need to get the SS one of these days.
@WalkerSmallEnginePerformance
Жыл бұрын
@@the_rocketchannel The new is launching on a H123 first. It’s a cool little rocket. I have the 3” and trying to decide between the 4” or 5” next.
@rickytrinh989
8 ай бұрын
I’m just finishing my Punisher and going to ground test it. What size charge should I start off with?
@Allan_aka_RocKITEman
Жыл бұрын
@the_rocketchannel >>> 👍👍 EDIT: The first cat I had when I was a kid I named _"Rocket."_ Really. WHY I named her that I have no idea...😊
Пікірлер: 36