All 2000 thru 2017 Softail models had twin cam B motors Has counter balancer.
@bendaves77
4 ай бұрын
The twin cam b or softail engines have internal balancing system that's easily removed as long as you have everything balanced
@-MrRichBiker1967
Жыл бұрын
I have a 2005 fatboy, Softail with the balancer, and still shakes like a cement mixer. Especially after rebuilding the motor with a new crank. Cam plate, oil pump and all new seals and bearings
@samval2879
Жыл бұрын
It probably jumped a tooth I had similar problem. It's a common problem.
@samval2879
Жыл бұрын
It's a tear down job to fix it. I welded my balancer after this Stupid thing. Well It won't happen again if u weld it. Motor company mistakes again.
@seanwilliams7983
10 ай бұрын
+1 counter balance gear shifted 2 full teeth on my 04 TC with a 98" build and wood 6-6r cam pulling 112 ft lbs TQ. Pulled out. Welded the crank n Tig'd the balancer gear. Took material off each balancer weight to exactly even specs. Bike now pulls 116 TQ n is smooth as butter.
@Starlesslemon
9 ай бұрын
M8s with no balancers shake obnoxiously. Nothing like a classic Harley. Will literally vibrate your hands asleep at high rpms
@troychatmanjr3649
Жыл бұрын
Speak that knowledge JL💪
@302roadking
Жыл бұрын
Great info big bro
@normanmatura6769
Жыл бұрын
If you build a big engine and put the counterbalancer back in is there an upgrade for that bearing because the factory bearing has plastic..🤔 I've always wondered was there an upgrade to that factory bearing on that counterbalancing shaft I have a friend who's Mike broke down on a long distance trip because the bearing and the counterbalancing shaft went bad 😳
@mark58mark
Жыл бұрын
Softail, twin cams have counter balancers. Damn… You didn’t know that?
@Anthony-vq1wn
Жыл бұрын
I love my twin cam. It loves to rev.
@falfab68
Жыл бұрын
The TC 88" has counter balancers, mine shakes through the entire RPM range without them
@troychatmanjr3649
Жыл бұрын
They JACKELOPE prefers the shake raddle & roll bro💯
@stevetomblin9007
Жыл бұрын
I like it to shake a lil bit to!😂😂😂😂😂
@roncoburn7771
Жыл бұрын
I run the balancer in my 128 bagger And shift at 6400 doesn’t hurt a thing
@johncarmen2098
Жыл бұрын
What is the cost and what is a big moter?
@azilla04
Жыл бұрын
So do you not take them out of softails specifically?
@MoonshineHarley
Жыл бұрын
Correct. Softail engines are rigid mounted in the frame.
@azilla04
Жыл бұрын
@@MoonshineHarley oh I see. That would make the negatives outweigh the positives when doing this. Far more vibrations.
@pharaohnile867
Жыл бұрын
I didn't understand him .did he say it's good to take a balancer out at M8 bagger or not to do it.
@paultrainer1049
Жыл бұрын
Great
@ryant3694
Жыл бұрын
You guys ever remove the counter balancers off a blueprinted Softail?
@MoonshineHarley
Жыл бұрын
We only do if it’s a race bike. Solid mounted engine so you’ll feel some serious vibrations at different RPM ranges. We make awesome power with the counter balancers still in and haven’t seen any issues revving to 7,200 RPMs.
@ryant3694
Жыл бұрын
@@MoonshineHarley for most softtail applications would you recommend windowing and edging the crank to help decrease rotational mass since the counter balancers are needed for rideability?
@richardphillips1041
11 ай бұрын
my 2022 M8 whines like a bitch, especially in 3rd gear throttle off...is this the counter balancer?
@dannyburgess2781
Жыл бұрын
Change. Are build. 96. To 110. With. Gear drive cam. With. S & s. Come. Up grade and. Head. Work. Blue print. BlNice it. Well
@johncampana86
Жыл бұрын
I will definitely be removing that counterbalance it once my warranty is up
@michaelcuff3418
Жыл бұрын
Stop! Trying to calm the BEAST!
@davo1152
11 ай бұрын
If you want something fast buy Japanese
@TEXAS_BAGITO
Жыл бұрын
👑👑👑👑
@stewart8127
Жыл бұрын
Bla bla bla put a solid compensator and a chain drive belt boy
Пікірлер: 35