Jed, Thank you for this video. You made it very simple to understand. You would make a great teacher. Thanks Paul 🇺🇸
@cayetanojed
Жыл бұрын
I appreciate the feedback, Paul @Radiotron47. Thank you very much!
@AA-px1ol
Ай бұрын
You explain perfect 👌, Thank you
@cayetanojed
Ай бұрын
Thank you!
@TimsWorkshopTJY
Ай бұрын
So the issue I have is two lights on my garage hooked up to one light switch. I can get garage 1 light to work but can't get garage 2 light to get the wifi signal. I can get it to flash fast by unscrewing it by hand 3 times and wait for it to load but just get a failed message? There is different options light single light or string lights. Tried both but no go. Any suggestions?
@jashroguel
18 күн бұрын
Nice tutorial maybe i use it to my smart bulb lights fory room
@cayetanojed
14 күн бұрын
Awesome! Thank you
@justashrimp8641
Жыл бұрын
Ohmygoodness thanks!! I couldn't figure out how to get it to connect 😂 your video helped a bunch!!
@cayetanojed
Жыл бұрын
You're welcome!
@cbscorner
3 ай бұрын
2024 who’s here
@TheSonnycheema
29 күн бұрын
What a weirdo you are
@n-p2048
Жыл бұрын
Hi, any idea on how smart lights get paired without connecting to them via Wi-Fi or Bluetooth during initial installation? How does your phone find them?
@georgewilkinson5868
5 ай бұрын
That is a really good question.
@n-p2048
5 ай бұрын
Got the answer. It's through UDP packets. It's mentioned in Tuya documents.
@poisiion
Ай бұрын
what did you select as product type under add device?
@dustin2264
Жыл бұрын
I really wish someone would do a video or explain how to manually connect to a smart light with no wifi
@kingjayy5472
Жыл бұрын
Same
@glenntorres953
Жыл бұрын
thanks a lot.
@fernandezranch797
4 ай бұрын
That was the same exact light bulb u replaced 😂 good shit 👍
@cayetanojed
4 ай бұрын
they look pretty similar 👍
@yuri_ambrosio
2 ай бұрын
After "Lighting" on what device do you tap?
@cayetanojed
2 ай бұрын
Light Source (Wi-FI)
@yuri_ambrosio
2 ай бұрын
@@cayetanojed thanks
@sezwo5774
11 ай бұрын
So if you turn the bulb OFF from the wall switch it no longer works at all or just loses programmed features? Very helpful video, makes clear there is a problem with control from wall switch.
@cayetanojed
11 ай бұрын
It will no longer work since it’s already physically cutoff from power. When you turn the wall switch back on, it may take a few seconds for the smart bulb to connect to wifi before you can use the smart features on the phone again
@sezwo5774
11 ай бұрын
@@cayetanojed Thank you very much for your reply. I hoped it would be functional without connection to wi-fi. Basically I am looking for a bulb that could be programmed with a phone and stay programmed and operational at specified parameters (colors) while turning ON/OFF from wall switch.
@cayetanojed
11 ай бұрын
@@sezwo5774In that case you may need to look into zigbee type of devices which don’t require WIFI.. Also, if you still want to have a wall switch that controls the bulb to turn it on or off, you’ll need a smart wall switch, I also have a video for it, and in your case you’ll need to set up the smart wall switch to remotely control the smart bulb.
@Danhashiel
5 ай бұрын
@@cayetanojed Does it consume electricity whether is on or off
@PatriciaAppling-v7i
4 ай бұрын
Hey u did a awesome job
@cayetanojed
4 ай бұрын
Thank you!
@tejab5863
Жыл бұрын
thank you for the knowledgeable session
@cayetanojed
Жыл бұрын
Always welcome
@robyntruitt2914
4 ай бұрын
Ok. I dont have wifi in my house ...should i turn on my phones hotspot as well as Bluetooth??
@cayetanojed
4 ай бұрын
Hello. I’m sorry but you will need to have WiFi in your house to properly use it as a smart bulb.
@phuketbungalowinfo2757
Жыл бұрын
Nice thanks. Can i switxh it on or off via phone when away from home too??
@cayetanojed
Жыл бұрын
Hello, I don’t think that’s a supported feature
@manuo7245
Жыл бұрын
Hi, where did you get the light switch cover? The one shown at 1:43 in this video? Thanks.
@cayetanojed
Жыл бұрын
I bought it from a local hardware store. I think it was Ace Hardware. You may also find it online in Amazon, or any online stores available in you region. They are fairly cheap
@manuo7245
Жыл бұрын
@@cayetanojed you wouldn't believe it but I have found it hard to find something similar in Amazon. Thanks for the info.
@JohnButkus-r4g
3 ай бұрын
My light will only blink only 2 times won’t go into paring mode
@cayetanojed
3 ай бұрын
Hello, sorry for the very late reply. Usually pairing mode should be a continuous blinking until pairing is complete. In your case, you may not have the same exact bulb that I have(I have a Tuya powered one) so it may have different pairing requirements. Please check the user manual. Otherwise, I’d recommend you reach out to the seller where you got your item from.
@mhdzakimlr7573
Жыл бұрын
Hi. Let's say this bulb is 12Watt so the brightness of 12watt equal to level 100% right?. if the brightness set at 50% does this mean it's become 6Watt?
@cayetanojed
Жыл бұрын
Hello, great question! I recall connecting it to a watt meter at one point before and tried bringing the brightness down and it did change the power consumption level down, too. However, I am not sure if putting it to 50% brightness brings the wattage down to half. There are other component still at work so most like it may still be more than 6.
@mhdzakimlr7573
Жыл бұрын
@@cayetanojed hey. I already tested using smart plug that can read the output details. I can confirm that if we reduce the brightness by 50%, wattage also will automatically reduce to 50%.
@readingbythemoon
7 ай бұрын
it doesn’t work for me :( it says connecting to device and then it fails
@cayetanojed
7 ай бұрын
A few things: - make sure you are trying to connect via 2.4Ghz WiFi, with correct username and password of course - your mobile device is on 2.4GHz WiFi as well - you don’t have too may devices connecting to your router Other than that, check with your seller for replacement options if you got a faulty unit.
@jasperkimrico1741
2 жыл бұрын
After replacing the original bulb with the new smart bulb, the bulb doesn't blink. I can't pair it with app. Is there a way to troubleshoot it? Thank you 😊
@cayetanojed
2 жыл бұрын
For most tuya smart bulbs, you’ll need to turn the switch on and off like 3 times, or until the bulb blinks rapidly. When it starts blinking, it is now in pairing mode, you can then go to the app to pair it. You can also check the instruction manual that comes with the bulb for more details.
@jasperkimrico1741
2 жыл бұрын
I tried it several times. I searched YT Tutorials until I ended on this video. Maybe the bulb is defective. Thanks by the way. 😊
@shahezahmed9960
6 ай бұрын
Does it support google assistant?
@cayetanojed
6 ай бұрын
yes, it does
@shahezahmed9960
6 ай бұрын
@@cayetanojed thanks . so on google assistant we can only control the light on/off but can color changing and dimming can it be done as well or you need that smart app
@adiemal1969
10 ай бұрын
Thanks ,but I use only wifi 5ghz..there is any way to connect only via Bluetooth?
@cayetanojed
10 ай бұрын
Unfortunately, this item only works with WiFi 2.4GHz. You’ll need to check for other smart devices that work with Bluetooth or WiFi 5GHz. Be sure to check the specs first and ask the store for the right specs for your requirements. Also check if they provide a return policy in case the item you got is not compatible with your home network. Good luck!
@Js.riah214
8 ай бұрын
Why isn’t mines flashing am I doing it wrong or something?
@cayetanojed
8 ай бұрын
In most cases, you’ll need to turn the physical wall switch on and off 3 consecutive times. Otherwise, you’ll have to check the user manual for the setup instructions or consult your vendor about it.
@maxmaxwell5498
7 ай бұрын
Do you need to register on icloud???
@cayetanojed
7 ай бұрын
Hello. nope not necessarily iCloud, but you will need to sign up for an account in the Smart Home App to be able to control the devices via internet.
@maxmaxwell5498
7 ай бұрын
@@cayetanojed hi im crying the bulb does not connec and i dont know what im doing wrong , should i also turn off my internest router and reconnect it while im setting the bulb??
@francyplayer7715
Жыл бұрын
But it's not blinking, I've tried everything.
@cayetanojed
Жыл бұрын
You may want to check the instruction manual that came with the device. Or, contact the store/company where you bought the device, they should be able to help you out with any issues related to the operation of the device.
@pakese30
Жыл бұрын
Same problem
@adilabusafa
8 ай бұрын
أهلاً وسهلاً ومرحباً بك-يتعذر التعليق-لا أعلم .
@cayetanojed
8 ай бұрын
Thank you for taking time to comment, and I’m sorry if I can’t respond appropriately because I don’t understand your comment. I don’t trust Google translate either.
@YyyyUuuu-sp5wq
3 ай бұрын
The light does not work at all. I think the problem is with my light
@cayetanojed
3 ай бұрын
Sorry to hear that. Please check the included user guide on how to properly use your device. The one that I got may be different from the one you purchased. You may also want to reach out to the seller or store where you got the item and check for warranty coverage or replacement options. Best of luck!
Пікірлер: 70