I cannot believe I didn't even THINK about using outlines to create a merged item like this! Lindee, you are the best teacher ever. I love your humor, tips and tricks and just general knowledge. I appreciate you!
@beverlylee6357
6 жыл бұрын
You are a good teacher! Such a concise and effective video that explains everything I need to know as a beginner with making tabs, digitizing and with Wilcom
@vanessamccorker9162
6 жыл бұрын
best explanation I have seen and was not looking for...thank you ! I have a multi needle and I was looking for a show and tell for making keyfobs on a Ricoma 15 needle machine. Day three oh my GOD!
@sabrinasalcedo9807
5 жыл бұрын
Great trick with the outline tool. Will definitely use that. Thank you
@RogueStitches
6 жыл бұрын
Thanks for the tutorial. I learned that when using a 4x4 hoop if you float your fabric instead of hooping it, you can float it on the bias so that you are sewing on the grain.
@kimberleastuparyk3766
5 жыл бұрын
Thank-you so much for such an awesome video. I have been wanting to MAKE key fobs for a while.
@fl0l0g
2 жыл бұрын
omg thank you for the step by step tutorial
@jesspeak7543
7 жыл бұрын
Thanks Lindee, you make things look so easy. I got a free trial disc last year at an embroidery event but haven't activated it yet. I am glad I waited as I can (hopefully) follow your lead. Great tutorial, Jess
@LindeeGVideos
7 жыл бұрын
Thanks! It does take some work. And it helps that I've already learned another program and know what I want to do. I just have to figure out how to do it in Hatch.
@socali09
6 жыл бұрын
Ms Lindee, Very Good.
@KK64
7 жыл бұрын
love the 2 different key fobs :) so easy
@klanik1662
9 ай бұрын
Thank you sooo much! I learned a lot
@sillyhew
7 жыл бұрын
Great video, thank you for all the tips
@Fallbaskets
7 жыл бұрын
Awesome video !!!
@80ilanit
7 жыл бұрын
Thanks for the great video , I do have Hatch and I learned a lot from this video ! Do you have a video that show how to stitch this too ?
@Bonny2506
7 жыл бұрын
THANK YOU!
@roneloberholzer2068
Жыл бұрын
This kid will try to do it! 🙂
@Corbyloc
6 жыл бұрын
Thank you. When you say "this one", we don't know which you are referring to. Say on the right or on the left. We can't see your cursor. Please be more specific.
@fmjfrazier
7 жыл бұрын
Thank you Lindee. Love your video. I have figured it out however you gave me some hints perfectly. I do have a question. I have Janome Version 5 that is a duplicate of Hatch or similar. When I am editing in my Version5 my hoop starts to go crazy how do I lock my hoop and design in place so it does not move. I am sure the procedure is the same in Hatch. I have tried contacting Janome but there support for the software is next to none. If you cannot help I will contact Wilcom. Thanks again.
@LindeeGVideos
7 жыл бұрын
Thanks! Go to Software Settings > Embroidery Settings and under hoop position, check "Manual." I haven't figured out how to make that the default yet.
@jackiekraemer596
7 жыл бұрын
Hit k on keyboard it locks design or bitmap or right click and select lock
@LindeeGVideos
7 жыл бұрын
Thanks! My fingers keep trying to use the shortcuts from my other software (which are similar to Adobe Illustrator) and when I do that in Windows. all sorts of goofy things happen! Not good for a video!
@MariaColon879
6 жыл бұрын
Thank you so much. You broke it down and made it a lot easier for me to understand.
@MoMaryR
7 жыл бұрын
Thanks for this. I have the trial and a bit lost. I couldn`t see what you chose for the very start to design the fob. Was it Digitize?
@LindeeGVideos
7 жыл бұрын
Thanks! At 3:40 I'm using Lettering and at 4:50 I'm using the Editing Toolbox. I don't get into the Digitize Toolbox until 5:45.
@MoMaryR
7 жыл бұрын
Thank you very much. Will watch again and understand now that you started with the lettering. Really love your videos, hope you do more. x
@brighterhoopes
7 жыл бұрын
Is there another term for 'creating outlines and offsets"? I use Premier Plus for a Topaz 50. I have searched my manuals and can't find that term, or the tool that would do the same thing.
@LindeeGVideos
7 жыл бұрын
StitchArtist 3 does it with 2 different tool. On will trace around the stitches to create outlines and another tool (Inflate) will create the offset lines. Punto calls it the inline/outline tool. I have no clue about other programs.
@cutflower36
6 жыл бұрын
Nice. How would u do it in embrilliance level 2
@LindeeGVideos
6 жыл бұрын
Try doing a search for it. Seems to me I've seen someone else do it recently.
@jefferyyasenchok3521
7 жыл бұрын
Wilcom Hatch is that a free software for digitizing?
@LindeeGVideos
7 жыл бұрын
Not exactly. But there is a free 30 day trial. Go to this site and find a link to download: DigitizingMadeEasy.com
@LindeeGVideos
7 жыл бұрын
Not exactly. There's a free 30 day trial so once you activate, you need to take the time to learn it. You're seeing my progress in these videos.
Пікірлер: 34