Wife and i found in the Junkyard a 71 mustang mach 1 351C C6 M code fastback car. So this combination would look awesome 1 day. Great car, brother.
@dougcarpenter7627
2 ай бұрын
I had a '73 MACH 1 silver /black with a Q code cobra jet 4 bbl. engine, c6 trans. comp. Suspension and put air shocks ( separate lines ), then put N50 -15 rears and G50 - 15 on front, Pro trac competition profile tires with American Racing Vector wheels 7 1/2 x 15 frt., 8 1/2 x15 rear - perfect!!!!!! In 1986!!!
@machone7580
7 ай бұрын
I did the same on my 1971 Mach 1 in 2017. 295/50 BFG's out back on Wheel Vintiques 10" Magnum 500's. People love it and always comment about it at the shows. My wheels have a 5.5" offset and tuck under there pretty good. My car was equipped with a rear sway bar, and that had to come off. You do need air-shocks or similar lift to keep them from rubbing however. The fatties look cool man! Enjoy them!
@Slowgroovin
2 жыл бұрын
Yes, they will. My brother's 73 has 295 50s on the rear, 15x10 Centerlines. With the right offset, they will fit almost completely inside the rear wheelwells.
@ramonolivares8059
2 жыл бұрын
What’s the offset needed please let me know thanks
@Slowgroovin
Жыл бұрын
@@ramonolivares8059I'm not sure tbh
@popples4973
9 ай бұрын
Those wide ass Magnum 500's look awesome on your 73'. I like the deep dish staggered look. Very sweet Stang too.
@midnightalley4586
2 жыл бұрын
I always thought the stock wheels were way too small for the mach 1 . My compliments to you
@jordanparker8359
23 күн бұрын
Yep your dad knows his stuff looks perfect!
@gerardomendez9461
6 ай бұрын
Really nice car, it is my dream one of this. Congrats.
@aguyinnc2865
Жыл бұрын
I have a '73 Mach 1 also. Didn't know anyone made wider Magnum 500's.
@skxj
4 ай бұрын
Those fit perfect. Looks good.
@tk848
2 жыл бұрын
Years ago I had a 71 and I put 295/50-15s on 8 inch wide rims and the inner lip of the wheel well would cut the sidewall of the tire if I hit a hard bump. I switched to 265s and they fit perfect.
@gregwong2169
2 жыл бұрын
Great Stuff!! Were the Magnum wheels custom made at 10" wide? Where can I purchase a set? Thanks for your help;
@javiruiz6354
2 жыл бұрын
Here from IG Love ya content man.
@KrugerConstruction
2 жыл бұрын
Thanks Javi! 👊
@gerardomedina333
2 жыл бұрын
Mr. Murray, your car looks awesome. Congratulations Sir! My Mach 73, have Bfgoodrich 245 60 R14. This size be the same, in front and in back. You can change it, in X (rotation). Maybe, I put 295 50 R15 later. Anyway. Your car looks fantastic!!!!
@sebastianlozada7223
Жыл бұрын
Do you have problems when turns left or right curves?
@gerardomedina333
Жыл бұрын
@@sebastianlozada7223 No, fits well. Regards Mr.
@brianeastman3547
Жыл бұрын
Beautiful old car man
@jordanparker8359
23 күн бұрын
Beautiful cars brother all of them
@c3dk
Жыл бұрын
Nice car !! Super nice rear wheel setup !!!
@nailbanger777
2 жыл бұрын
Awesome video Murray!
@KrugerConstruction
2 жыл бұрын
Thanks!
@nailbanger777
2 жыл бұрын
@@KrugerConstruction you’re welcome!
@shawndyck7332
2 жыл бұрын
Love it!
@KrugerConstruction
2 жыл бұрын
Thanks again for all the help Shawn
@shawndyck7332
2 жыл бұрын
@@KrugerConstruction anytime, thanks for letting me come help you and your dad!
@dankean8319
2 ай бұрын
295/ 50 should fit, I had 295/50-15 on my 74 mark 4 275/50-15 on 15” rims with stock hubcaps it looked great!!!
@dankean8319
2 ай бұрын
8” by 15” rims
@arthurr4747
Жыл бұрын
I ended up putting 275 on my 73 I was scared even that wide was not going to fit, if i knew i would of gotten 295
@sharkattack1979
2 жыл бұрын
Class bro👌👌👌
@KrugerConstruction
2 жыл бұрын
Thanks Kevin! Completely the look we were going for.
@Hemi-426
Жыл бұрын
Hello, Kruger. I’m in Calgary, my Mach 1 is 1972, I’d like to know where did you get these Steel Chrome Magnum 500 rims, I hope I get one 15x8 for rare and 15x7 for front. Thank you so much. I’m looking forward to hearing from you.
@leebartle9276
2 жыл бұрын
Looks great! What's the rear rim size?
@flylyfe5526
2 жыл бұрын
Would like to know the numbers for the setup if you can post it for all us mach1 owners thank you for the content
@hammer5475
Жыл бұрын
I have the exact same car! I have 15 inch cragers all the way around. Right now I have 225/60R15 in the rear and 195/60R15 in the front. I want to go to a bigger size in front and back. Any suggestions and thank you!
@javlin379FS
9 ай бұрын
I have one that looks just like yours nearly . Would love to do this to mine. Where did you get the wheels?
@motorsforthemasses
Жыл бұрын
I have 295's on my '71 Mach 1
@dwaynegochnour5284
Жыл бұрын
Where did you get the rims and what size are they (with back space) and the tires what size thank you
@travisphlipot7358
2 жыл бұрын
What was the rim sizing for the mustang
@ittybitbobo7657
3 ай бұрын
Looks like the tires are going to rub
@cj92345
2 жыл бұрын
imo..... 295's are too short, i run 275/60's and it fills the wheel well
@BPF80MCar-vi1pg
Жыл бұрын
Almost as wide as my F80's
@theskilledveteran
3 ай бұрын
Whats the size of the front tires you never said?
@iambiga75
Жыл бұрын
My 71 has 295/50r15s on the rear 215/45r14s on the front love the look of them fat boys in the back
@sebastianlozada7223
Жыл бұрын
Someone knows if can put 245/60 15 in my Mach 1?
@duke2304
Жыл бұрын
What year Mach? I have a 1970 Mach 1 with original 15x7 Magnum 500s. I have BF Goodrich Radial TAs P255/60R15's in the rear and P245/60R15's in the front. They fit great and look awesome. No clearance issues at all. Nice aggressive look but not over the top.
@c.j.cleveland7475
6 ай бұрын
That's all I've ever run on my '73 Mach, front and back, since I got it in 1988. Handles great in the curves. No rubbing anywhere. It sat a little low in the back, even after I put new leaf springs in. So I got a pair of air shocks and ran induvial air lines to each. I found that 50 psi is perfect, levels the back out nice and even. 😁👍
@terryedwards7023
4 ай бұрын
Now get rid of that imported car next to the Stang!
Пікірлер: 50