Yes! Thank you! At least I hope it was cheap...well, I know one of these in good condition is worth more...but this one is a much-modified non-original without factory ignition, cart, exhaust, carb...but that doesn't affect my fun. I couldn't really justify 3 to 4x the price anyway :)
@MC-MC1MC
Жыл бұрын
What a beauty ! Very nice video. Thank you.
@ThomasPCGuruENGINES
Жыл бұрын
You are too kind! The video starts off "very nice" and goes awry when we lost the good smartphone...which was discovered after 4 days in the shower...but still goes...except for fogged lenses...which is the only bit I use...so,...I have run out of words but will keep everyone posted:)
@davidkepley4396
Жыл бұрын
You might try holding the intake valve open when initially cranking to get the flywheels spinning faster. Less chance of breaking a wrist or digit. Works well on My 1916 1&1/2 hp Fairbanks-Morris. Very nice and good running engine, Great find!
@ThomasPCGuruENGINES
Жыл бұрын
Good tip! You are most welcome here David, and any tips gratefully received! I will try this
@steam212
Жыл бұрын
Fantastic job Mr. Thomas! I will look to see if I can locate the proper mixer (carburetor) for you here in the states. Keep up the GREAT WORK 👍
@ThomasPCGuruENGINES
Жыл бұрын
Yes I'm keeping a watch out too! That's very kind and your help is much appreciated. I would compensate any costs of course. Dude, 998 subscribers...!
@TheStig1961
Жыл бұрын
I like the sound of these old engines🙂. You make good restorations. Regards from Stig Österberg from Dalsbruk in Finland (the other side of the world.)
@ThomasPCGuruENGINES
Жыл бұрын
Terveisiä! Thank you very much! I'm not so sure I do good restorations, but we can have fun. This engine is pretty tired....I also love the sounds of the engines. Tervetuloa Stig!
@odu50
Жыл бұрын
Hi. I discover your videos and your passion for the Miss engines. I first saw these engines on my travels in New Zealand, at Napier Art Deco weekend. I have always dreamed of having a Miss but in Switzerland it is extremely difficult, So I'm happy with the scale models M 92 and Red Wing from Pm Research. Thank you very much for sharing. Regards Christian.
@ThomasPCGuruENGINES
Жыл бұрын
Thank you Christian! You are most welcome. Everyone should see your enginesL kzitem.info/news/bejne/1ouKnIWQameVn20 The red wing is beautiful and your other models, Well worth visiting!
@thedolt9215
Жыл бұрын
Good magneto, great for zapping the kids… Good Lord, you sound like my dad! He told me to check the connection to the spark plug while the lawnmower was running… Afterwards, he said, I bet you never do that again.
@ThomasPCGuruENGINES
Жыл бұрын
Lovely man, showing you what not to do... :)
@krzysztoftkacz
5 ай бұрын
The electronic ignition system was great idea.
@ThomasPCGuruENGINES
5 ай бұрын
Glad you think so! Not all my ideas work out so well... but my shoulders and arms are getting old...it's a cheap solution too :)
@rowenalukomska2190
6 ай бұрын
Thankyou for the information and the video on how to get the chore boy running. I have one here in Christchurch, NZ. It was my late husband's pride and joy. It seems as though it wouldn't start, because the petrol wasn't getting through. We managed to get it working by poring a little bit of petrol. I notice that you use a glass jar. Is this a common problem?
@ThomasPCGuruENGINES
6 ай бұрын
I'm no expert on this particular model only really on the little ones though the principals are the same. The original carburetor is an extremely simple affair with a needle valve, I'd first disassemble this and clean and check for blockages. My carb is a replacement so I guess others must have this issue...and mine is off a Ford Model A and way more complex and unsuited really. Welcome to the comments, Do keep in touch :)
@peterotway-fd7oy
4 ай бұрын
you,v got to get that magneeto gowig man
@ThomasPCGuruENGINES
4 ай бұрын
Yeahhhhhh.....could do I suppose but the carb reliability as it is seems a bigger problem to me. Once that is solved....thing is, I have seen a fully complete one sell here for not much more than I paid...so...I wait
@anythingoldmechanical
16 күн бұрын
The Amanco should of had a mechanical igniter and a LOW TENSION Magneto.
@ThomasPCGuruENGINES
14 күн бұрын
Yeah I've seen that on the restored versions of these
@anythingoldmechanical
14 күн бұрын
@@ThomasPCGuruENGINES exhaust is incorrect too
@evanhale4845
6 ай бұрын
That runs sweet, I've got one of these myself
@ThomasPCGuruENGINES
6 ай бұрын
Good on you Evan. I need to work on te carb, the rest is bullet proof
@lorddraper
Жыл бұрын
That lister has twin fuel tanks the smaller one is for petrol and the other for paraffin or kerosene we have lots of them in England we used have something called tvo which was basically paraffin you get it hot on petrol and then turn it over to tvo or kerosene or paraffin I have tractors like that
@ThomasPCGuruENGINES
Жыл бұрын
I've heard about this dual fuel thing bit I thought there had to be more syuff eg on the carburettor. Do you mean my actual lister could have originally been dual-fuel??
@rustygoldfanatic8830
11 ай бұрын
Thats an Associated Chore Boy 1 3/4hp by the looks of it.
@ThomasPCGuruENGINES
10 ай бұрын
Thanks! Welcome to the comments. I tried to get this going a couple of weeks ago again, couldn't...I think I need a better carb solution...
@andyduft2997
Жыл бұрын
How did you make the hole in the glass fuel jar🫙? 🇨🇦
@ThomasPCGuruENGINES
Жыл бұрын
I watched this video kzitem.info/news/bejne/tpWE2oh4jXmhZWU and with water and gentle pressure a normal dril bit worked just fine. I was amazed!!
@andyduft2997
11 ай бұрын
Thanks!
@ThomasPCGuruENGINES
Жыл бұрын
PART TWO RUNNING GREAT kzitem.info/news/bejne/17BrmXiep5N1mm0si=TLlIFHkabsygL5pf
@chipsrafferty8362
4 ай бұрын
As interesting as this is your camera work is making me quite dizzy,so I’m leaving ta ta.
@ThomasPCGuruENGINES
4 ай бұрын
Yes I left some in there that was AWFUL it makes me dizzy too. It was supposed to be edited out
Пікірлер: 35