Tweak that pedal so it hits the floor before landon hits redline.
@Beandiptheredneck
Жыл бұрын
I was coming to say the sane thing 😂 might save replacing another engine
@paulrivers7248
Жыл бұрын
Been thier done that lol and my son couldn't figure it out then a few yrs later I finally told him the secret dad trick that I had done lmao so now he can maybe do it when he has kids and then pass it on down 🤷♂️🤷♂️😁
@timothycarey3883
Жыл бұрын
Just screw a thin metal block to the floor under the carpet so he can only go 80% throttle.
@thedumbassspeaks
Жыл бұрын
A Hillbilly governor! I love it!
@Jan-pw4po
Жыл бұрын
Tennis ball under the gas pedal
@sickjohnson
Жыл бұрын
I'll say it again, Paul you really love your kids man...mad respect because that is an insane amount of work into that truck. Good parents are the rarest and most valuable thing on this dirt.
@williamboggess6893
Жыл бұрын
Shout-out to whoever adds the "while we're working" music good job
@TheTuttleCrew
Жыл бұрын
I will never understand why my family and I enjoy watching you guys work on vehicles all the time???? I can't get my wife to stay in the garage and my daughter has no interest in 4x4's but it's great that each new video has my wife, daughter, and 3 sons and I all together on the couch as a family. Thank you Fab Rats for keeping it family friendly!!!!! God bless you and yours real good!
@Patrick.Weightman
Жыл бұрын
2:57 never thought I'd see a hitmarker here 😂😂
@danielshoemaker4935
Жыл бұрын
Looks like you found a new editor. It’s just a little different style than normal
@jerrymestas1231
Жыл бұрын
Four dudes staring at an awesome motor after it was started!! Like kid in a candy shop, great job to all of you👊🏻
@lorenmeyer5290
Жыл бұрын
Good morning Fab Rat's! Love watching and laughing with you guy's!
@joesepspindel3335
Жыл бұрын
I didn't have a dad. I bought things I could afford and researched how to fix them but when something happened that I couldn't fix because I didn't have the tools, money or knowledge I had to let it go for a fraction of what I bought it for. I never could get a break. Best car I ever bought is my 2006 scion XB. I've had it for over 13 years now and it never needed much work at all.
@dalegereaux1863
Жыл бұрын
Somewhere as he watches you put pieces and parts together to bring a truck back to life, Dr. Frankenstein smiles. 😁👍
@chrisantoniscountryman-pur9954
Жыл бұрын
Good morning Fab Rats and fans!
@jeepsandjalopies
Жыл бұрын
Always glad to see a FabRats video get posted
@joeglynn3916
Жыл бұрын
See you got your New Editor. GreatJob!!!
@genesiedenburg9798
Жыл бұрын
Coffee and fab rats, great start to a beautiful day 🇺🇲
@1jimif
Жыл бұрын
Hey Landon, That's 1 cool machine! I love the old square bodies, especially with a step side bed! Can't wait to see it on the road, or actually off the road!....Peace...jimi
@joser.mendiola1602
Жыл бұрын
Nice touch with the math formulas and the X-File sound track 😊
@richardthomas1743
Жыл бұрын
Gooooood morning everybody and thumbs UP to Fab Rats!
@TheBloatedPony
Жыл бұрын
Absolutely love seeing all four men with the common goal of making that truck run, watching it fire right up. So fun! Another good one y'all.
@georgevindo
Жыл бұрын
I'm glad you guys have so much fun in the shop while getting things done. Thanks for the video Michelle and crew.
@rdratc633
Жыл бұрын
Video quality is off the charts good! Thanks Hunter!
@donalddarbonne779
Жыл бұрын
Michelle, your editing and music selections are top notch.
@shannonkoelbl909
Жыл бұрын
Love the splice-ins from movies
@om617yota8
Жыл бұрын
Paul, you're awesome. It would be an honor to shake your hand. Zero percent chance my dad would have helped me build a truck, even if he'd had the skills or tools, had to figure all that out on my own. I hope your kids properly appreciate all you do.
@k13ehr
Жыл бұрын
My dad would have been more likely to wreck it after I'd built it out of spite.
@HAHA.GoodMeme
Жыл бұрын
Our boomer dads were so terrible we have to learn this stuff on youtube.
@jimedge8301
Жыл бұрын
My Dad didn't help me on anything ,but then I have never felt entitled to the point that I would bad mouth him on a you tube video,my father did the best with what he knew. Miss you Dad 🙏 RIP. Hey Paul keep up the great content 👏👏👏
@om617yota8
Жыл бұрын
@@jimedge8301 Glad you had a good dad otherwise. My comment was definitely meant in the spirit of appreciating the gifts Paul is given, not badmouthing my own dad. That said, the shoe certainly fits, and I feel no shame in saying so.
@jimedge8301
Жыл бұрын
@@om617yota8 sorry if I offended you with my comments,it was directed more to the others bashing their " boomer dad's" my father wasn't the best trying to please 7 kids and I never felt he owed me anything, I just knew I wanted and tried harder when It came to my children,so as not to repeat the same mistakes he had done.
@markkeyser
Жыл бұрын
'Throwin' the wrench reminded me... High School 1967, working on a 1963 Triumph Herald (the predecessor of a Spitfire). Classmate, Dennis O'Brien, was sitting in the car 'tapping' on the bezel of a Smith's speedometer. "Dennis, don't do that! You're going to break the glass!" Tap, tap, tap - CRACK!!!!" Dennis glanced at me, hopped out of the car and ran. I picked up a 13mm box end wrench and let it rip. Square in the back of his head - THUD!!. 56 years later and I wonder if the 'lump' is still showing?
@timothybailey7118
Жыл бұрын
I know the real value of the “Landon’s Truck Build” is great content tor the channel but I hope someday Landon understands how great his dad, uncle Ben and Sean are for working on ‘his ‘ truck…and that he can express that appreciation in a meaningful way.
@calvinlevie943
Жыл бұрын
Excellent video keep them coming cause there great thank you, very good with the video's Michelle keep this bunch going
@frankportigiano1910
Жыл бұрын
Love the split screen action and the rapid wrench/ socket action. Definitely gonna be a Cool Truck when it's finished
@brettmillett3851
Жыл бұрын
Only discovered you guys a few months ago but your channel has become one of my favorites. Not only do you guys do a terrific job of filming and editing, I really connect with you guys as another guy who grew up on/near highway 89. Keep up the good work! And…even though I’m a different religion (Ford guy 😂) I love me a good square body. 🙌
@stinkhammercow
Жыл бұрын
😊😅 j
@rolandtb3
Жыл бұрын
Landon's beaming. That truck sounds good. No leaks.
@andrewcooper8980
Жыл бұрын
Look at Landon, he’s excited getting right in there helping. He’s a good kid
@johnbarletta5680
Жыл бұрын
Ben is the essence of man, there should be no episodes without him. When the lord returns to earth he will seek Ben's advice.
@bernhard8540
Жыл бұрын
Those guys need those hard hat baseball cap inserts as much as they bang their heads under vehicles haha❤❤
@bernhard8540
Жыл бұрын
The truck is coming along great ❤ im sure landon is excited to drive his truvk again for sure❤❤ Ben the trans grease is made so that once the trans fluid warms up that specific grease will warm up and turn into trans fluid ❤❤❤ thats whats special about it but not a lot of people realize theres special grease for inside transmissions but you did thats good, it means you know the proper stuff to use for different parts❤❤❤
@stevehaken
Жыл бұрын
Well done! I remember my Dad helping me with my projects in the garage. The memories will last forever.
@larryhall6416
Жыл бұрын
Talk about two brothers that are so talented. Ben and Paul are truly blessed by the hands of God with so much talent. God bless Fab Rats 🐀 😅
@catman19
Жыл бұрын
Hey Paul,, instead of cutting & welding the gas door, why not just switch fenders, left for rite
@alfonsoalonzo
Жыл бұрын
the little clank of defeat was kinda funny with the gas lid at least it still worked even with opening on the other side
@davidkelly1038
Жыл бұрын
Man, seeing y’all work on these ole square bodies reminds me of an old 83 Chevy 4x4 that I had. It was a swb with a 4spd 350. I sold it in the early 2000’s for next to nothing because the motor wasn’t running at the time…and I needed money. I love the old square bodies!! I kick myself every day for not keeping it.
@jeffshafer7269
Жыл бұрын
Hope the son appreciates dad building his truck. I like it. Didn’t happen with my dad.
@The805KC
Жыл бұрын
You guys are awesome and the split screen with Paul and Ben is cool to watch. Keep up the great work
@jamesdavid5997
Жыл бұрын
Laydon is a lucky kid to have you all, family, getting his truck race ready.... Now he's just gotta go easy on the gas pedal and keep that old girl rolling. Good luck!! Cool truck for sure!!!
@albertorozco5981
Жыл бұрын
Paul , Ben .etc ..there all really good guys ..great videos to watch with the family anytime. 💯
@jasonkonopa6134
Жыл бұрын
I seen a pretty cool trick that a custom shop did find an old steel gas can cut the bottom out, cut a hole in the bed the same diameter weld it to the bed put a fuel neck going up to the lid of the can pop the top fill your tank up
@utahjohnnymontana3373
Жыл бұрын
the X Files music...love it. When it started up, everyone in place...its like a NASA program running down the checklist. :D
@user-ij8wf6cz8u
Жыл бұрын
Really enjoy watching you guys I have a ton of square bodies myself always doing similar stuff . I was just thinking it probably would have took less time on the gas filler door if you would have in bolted both fenders and swapped sides . Way less welded and body work . Keep up good content.
@davebaker489
Жыл бұрын
The money and time some dads will spend to save their sons $$ money $$. With luck ... the lessons learned will be priceless. Good work "family" .
@markcaldwell1245
Жыл бұрын
It is great to see family working together. My family would be all fists and foul language, lol. Awesome job everyone.
@drewfleming7065
Жыл бұрын
Hey Ben...dont forget the dielectric grease on those plugs...really helps keep water out and easy of separating the plug later...
@xfactor5876
Жыл бұрын
This channel has put together some really cool rigs, but this one is my favorite build. Just a clean ole square body that is turning out cool.
@jessestevens8768
Жыл бұрын
The x-files music when Paul was thinking was great lol
@jamesbigham9036
Жыл бұрын
Good morning you guys definitely made a lot of progress on Landens truck. I am sure you guys will figure out the issue with the bed.
@keytonaustin2602
Жыл бұрын
Paul maybe I could teach you something when you do braided lines tape the end before cut and the tend to stay together better and you don’t poke yourself as bad try it next time!!
@nighprw607
Жыл бұрын
. You guys have to realize many of us had dads who never worked on cars, tools. No shops around to hang out with cool dudes learning things. Paul and Ben just make up a plan, start drilling holes, welding and it works! Poor Hunter seems to take a lot of ribbing about his truck but gets his zings in also. Good group of people working as a team.
@nedharmon9135
Жыл бұрын
Duck Dynasty has nothing on the Cox boys. Dang I am so envious of you guys working together like that and having fun doing it too. I always worked alone. I didn’t mind but the help would have been nice and fun too.
@thomasmurphy5906
Жыл бұрын
Landon's step side short bed square body pickim up truck is turning out super sweet
@TxRiderDave
Жыл бұрын
Great progress. Lots accomplished. The squarebody will be running and whoopin’ on Hunter’s truck soon.
@anthonylee2099
Жыл бұрын
Great job Paul, Ben, Sean and Landon. It’s slowly coming together. First crank start up. Kool! Hopefully Landon will have a kool head on his shoulder and Not be Over Zealous with the Power the LS has! We’ve All been young before! 🤙😎
@JMG_Aerial_Imagery
Жыл бұрын
Great video!!! I cant wait to the next video when we all figure out that with the tail light back on the gas door will not open all the way.
@trail-wolf4x4
Жыл бұрын
Hmm maybe title should be "Eviction Day! Landon's Truck is getting Out"
@defuller1
Жыл бұрын
19:45 Are you going to have to put the taillight on a hinge so you can swing it out of the way whenever you want to pump gas? 🙃
@larrydavidson3402
Жыл бұрын
Making progress on Landon's truck soon he will be backing it out with a big smile on his face.
@CptBlackbeardlives
Жыл бұрын
You all are spoiling the kid. When i grew up I did all the work on my car and paid all exspenses, parts, fuel, insurance etc.
@sethcrawford6219
Жыл бұрын
That boy reminds me of me. I put three motors in one truck within two years
@danaowen9014
Жыл бұрын
A whole pit crew working on landon's truck, he must be some one important,😃, you are landon, 👍
@MrBillsfishin
Жыл бұрын
That is going to be one heck of a nice truck truck when it is done. Very nice build gentlemen.
@ryb6463
Жыл бұрын
&Michelle -your edits are getting really good. 👍🏻
@Cougracer67
Жыл бұрын
Transmission Assembly lube is basically Vasoline with dye. It melts at a low temperature like Vasoline, unlike wheel bearing grease or the red stuff. The idea is for the assembly lube to dissolve into the trans fluid. High temp grease that doesn't melt at operating temp. may clog the filter or prevent a valve from moving freely. At least that's what I was taught years ago.
@marvincarter870
Жыл бұрын
Welcome back Paul, Ben, sean and Hunter. Lot's to do getting Lando's truck out of the shop and back on the road. It's going good and moving forward and it runs! Which makes me wonder about how the new shop is coming?
@paulhall170
Жыл бұрын
Grandma Lolly chucking Hunter under the bus, classic!!! Paul: "Who'da thought a throttle pedal could be so hard to do". Hunter; "I'm finding it entertaining!" Hunter your camera work has improved in leaps and bounds, keep at it, mate!
@darinhassett4708
Жыл бұрын
been watching you guys for about a year plus I'd love to have a shop like yours... love the work
@CORNDODGER
Жыл бұрын
Wouldn't WE ALL !!!! Just to have a LIFT a PLASMA CUTTER AND A TIG hell I could I build a HYPERCAR or a cool go kart at least
@mikecallan8346
Жыл бұрын
Tip: Cool your body metal down with an air blow gun while your welding to stop the metal from warping so bad from heat!
@TheOldaz1
Жыл бұрын
Good progress, he'll be a happy boy when it's back on the road.
@mr_mongo7228
Жыл бұрын
Those Flow Masters sound great I have the Flow Master X cat backs on Challenger and it wakes up the neighbors! Landon is a lucky kid having his dad and uncles building his truck for him. ❤😂
@joshg8458
Жыл бұрын
Could always put a body lift under her to clear the gas neck. Then you could get bigger tires!
@zippycfpv3619
Жыл бұрын
Flipping down the fuel door would’ve been wicked cool!
@RCRitterFPV
Жыл бұрын
love how ya guys just make it work.... eye it up, grab a cutting wheel and just go at it.. ehh close enough... and it comes out working well looking cool and with character.
@keithreilly386
Жыл бұрын
The rumble of a flow master beats the heck out of the obnoxious sound of a glass pack
@jerryscott253
7 ай бұрын
It amazing how you are with your boys glad to see how they respect you Mr. Paul I got a autism son who loves to build stuff it just amazing watching yall keep the good work up
@patrickduley405
Жыл бұрын
Spring has sprung working out in the shop. You all are my night time show until winter
@brockness7133
Жыл бұрын
Y’all gotta get us a video of a “build breakdown” of the ol’ wood truck ASAP!!!
@steelmill
Жыл бұрын
Nice job on Landons pick up.I have a feeling if he breaks it this time he's going to fix it himself.
@01WantedMost
Жыл бұрын
love the split screen!!!!
@randyhoffman3283
Жыл бұрын
Hunter is coming right along!
@rhondasweeney7271
Жыл бұрын
Awesome job that everybody has done. Can hardly wait until it's completely done in Landon will have his pick up back
@dennisdain987
Жыл бұрын
Great work done by all members of the team.
@saintracheljarodm.holy-kay2560
Жыл бұрын
Well so close but yet so far....have a good week and God bless amen.
@mikemelchiorre7414
Жыл бұрын
8:35 Hunter save that electric switch , They're excellent for large power draws like a winch or large bank of off road lights , or a second battery , like used for campers . 17:45 Yummy , Day old Donuts Rock , they're not squishy anymore . Get some Strawberry jam in a mug and Dip.
@TonyKGent
Жыл бұрын
going to be fun putting gas in with the taillight in the way and it flipping out :P I love watching Paul's ingenuity though.
@lilyofthevalleynaturechannel
Жыл бұрын
With that fuel door there, isnt the left turn signal going to be in the way of it opening?
@MrJest2
Жыл бұрын
LOL!! You sure can tell they are related. When Paul was putting the accelerator pedal in and said, "This is not very user friendly"... he sounded _just like_ Merlin...
@jerryb1234
Жыл бұрын
I've always liked the step-side trucks, Paul should just buy Landon a pos like Hunter's, and keep that old square-body for himself, it would be a shame to see Landon destroy it in less than a month, but I am a Ford guy, so maybe I will find some joy in it's destruction,😉👍, lol, thanks for sharing guys.
@olivermaryjane6577
Жыл бұрын
That’s your skid plate? YEp… hahahahah that silence said it all.
@kevinjones2667
Жыл бұрын
Grandma lolly casually throwing hunter under the bus 😆 🤣 😂 ❤ from pnw oregon
@Kickinpony66
Жыл бұрын
@5:01... The look on Landon's face says it all! (I'll get it to move farther than that!) 😁😁 @12:35... Paul using his "Safety Squinters" 😲😲 @16:21... I suppose that's one way to do it! Ben had the right idea; but with the Wheel of Death, you really need a Face Shield. 😉😉
@lgun1
Жыл бұрын
Ben, that's not a temperature switch. It's commonly called a pillow switch and it's only function is to tell the computer that the transmission has completed a shift.
@kimetherington2252
Жыл бұрын
Another great video, Fab Rats getting er done, well almost! Til next time, take care, stay safe, and we'll see you on the next...
@1944chevytruck
Жыл бұрын
good job everyone!
@DasKroenerTier
Жыл бұрын
There is one thing I always notice... Paul: Owns a nice Plasma Table with automatic cutting mode Also Paul: Always cuts his Parts by hand :D
@theburtseoni
Жыл бұрын
Landon is such a fortunate young man to have such a team as his dad, uncle and other relatives backing his project up with real help. And Landon's folks are very fortunate to have such a fine young man for a son!
@Farm_fab
Жыл бұрын
Paul: "got a lighter ?" I'd hate to see him make a fuel of himself.😁
@rmarsh8082
Жыл бұрын
About time that poor kid has a capable truck !!! Congrats Lando (sp?)
Пікірлер: 514