Great video 👍John love the tab test flop finish,I started listening to podcasts with saunders and grimsmo knives.They mention some funny moments in machining etc.
@JohnSL
3 жыл бұрын
Thanks. I've listened to some of their podcasts, but paused on them when I learned about the Within Tolerance podcast. I should go back and forth between them. Thanks for reminding me.
@bigbird2100
3 жыл бұрын
@@JohnSL just interesting to just listen when trying to get on with other things.
@dass1333
3 жыл бұрын
I am amazed at how well that vice held. John Super Dad !
@JohnSL
3 жыл бұрын
I know, right! Thanks.
@dass1333
3 жыл бұрын
Nice intro. Lol 4th rolling in the back.
@JohnSL
3 жыл бұрын
Thanks 👍 My wife and I had fun doing that.
@burningdieselproduction5498
3 жыл бұрын
Great video John! I really enjoyed it!
@JohnSL
3 жыл бұрын
Glad to hear it!
@danieltryon6574
8 ай бұрын
Nice John. What are you using as coolant?
@capnthepeafarmer
3 жыл бұрын
What I've found using my HRT160 is that lower DOC adaptive clearing is the way to go with my 4th. I can't take anywhere near the DOC or FPT that I do in my vise, I mean, obviously right? My go to recipe is 0.04"-0.1" DOC at 240IPM with my 0.5" long reach endmill.
@JohnSL
3 жыл бұрын
My machine has a maximum recommended size of 3/8" for end mills. It's a precision machine, so my usual DOC/WOC are what many would call light roughing.
@tdg911
9 ай бұрын
Were you taking a lighter woc and doc since you had so much material stick out from the vise vs material supported in standard vise with parallels?
@jbrownson
3 жыл бұрын
Thanks for the video, neat project
@JohnSL
3 жыл бұрын
Thanks for watching!
@missysnores
8 ай бұрын
Since you are working from the centerline of the spindle are your tool, offset all in a positive fashion?
@dimsum5567
Жыл бұрын
This does not seem to be a precise way of setting Y. If the vise is not centered ideally with the rotary axis of rotation.
@TheTrex600ESP
2 жыл бұрын
1 day to late, but May the 4th be with you!
@JohnSL
2 жыл бұрын
Nice!
@ericschneiter
3 жыл бұрын
Are you using the Rotary extension or just changing your WCS?
@JohnSL
3 жыл бұрын
I'm not using the extension, as it's pretty expensive for my needs. So I'm using a single WCS along with the tool orientation option in each operation. I showed this in the previous 4th axis video.
@ericschneiter
3 жыл бұрын
@@JohnSL awesome thanks for the info. I’ve been playing around with them and figured it out. Thanks for the reply!
@TrPrecisionMachining
3 жыл бұрын
GREAT VIDEO
@daleksw
3 жыл бұрын
Brilliant vises aren't they? I've also found it's amazing how well they can hold Al with surprising stickout. Doesn't work anything like as well with delrin as the material's fundamentally so flexible it's impossible even to face it held like that. For setting up the Y, Z and A zeros, I can't imagine a better advert for switching to a probe instead of a Haimer. Have a look at kzitem.info/news/bejne/rqWC0655k2qKnKg and you'll see what I mean. The results there were so good, I twice got my mental arithmetic wrong by a factor of 10 as I found it hard to believe repeatability down to micron levels on a humble Tormach mill.
@JohnSL
3 жыл бұрын
I wish. I looked at buying a used probe, but it turns out the cost to enable the features required for a probe are about the same as the complete probe/tool setter package, which includes enabling all required features. In other words, about $6,500. Sigh.
@daleksw
3 жыл бұрын
@@JohnSL Ouch! Sounds like we're in the wrong business. At least those vises are very modestly priced. I have pair of them - one mounted on the table - and I love the things.
@dass1333
3 жыл бұрын
I can see using a dead center if you get any flex. Not that I see any need yet.
@TheDieselDangler
2 жыл бұрын
You made an A on the A
@qpwner
3 жыл бұрын
I still wear the Q almost every day!!
@qpwner
3 жыл бұрын
@@John-ik2eg We did actually think it was a great name for a detective agency!
@JohnSL
3 жыл бұрын
Fun replies Quincy!
@JohnSL
3 жыл бұрын
ROFL!
@yitloongtan4972
Жыл бұрын
This type spa my customer not accept,they prefer machine finishing
Пікірлер: 33