Worked better than I thought it would, never tried it
@johnwilburn
2 ай бұрын
I had some water damaged rusty taps and dies. Came out looking new.
@user-ln3ib9jy7j
Ай бұрын
@johnwilburn hey
@edsmachine93
2 ай бұрын
Nice results John.👍👍🇺🇸
@Raycr
2 ай бұрын
You can reuse the vinegar over and over. Looks nasty but still works. If you wire wheel the cleaned parts just after they're dry it will help close up the pours and slow down the rust
@ice9982
2 ай бұрын
Keep in mind after u restore metal with acid you have stripped it of it’s factory coating so it needs to be resealed
@johnwilburn
2 ай бұрын
There’s been no coating on this ever. The rust was the coating. But yeah…. Wouldn’t be bad idea to coat them with something.
@MrKago1
2 ай бұрын
My grandpa had an old rectangular oil can with the top cut off that he kept used motor oil in. After using his garden tools he would clean them, sharpen them and dip them in the oil to reseal them.
@ice9982
2 ай бұрын
@@MrKago1 heat the metal up and quench in oil makes it rust proof
@ice9982
2 ай бұрын
@@johnwilburn u sure? I would think all metal tools would have some sorta coating on them otherwise they would flash rust on a humid day
@johnwilburn
2 ай бұрын
@@ice9982stored inside and used regularly, they’d get a dull gray that was pretty stable.
@heavensmopars
2 ай бұрын
Works great on the short term, does the job quickly. Don’t forget to take them out right away, very acidic. Pros/cons to everything. 👍🤔😃
@Mohawk62
2 ай бұрын
I'd say it works!
@Ridendrty
2 ай бұрын
I have had success with vinegar and its fairly cheap. Good for bolts and small parts. Warning..I tried vinegar on rusty chrome wheels and it turned the chrome kinda yellow.
@johnwilburn
2 ай бұрын
I’ve never tied it with chrome, but thanks for that heads-up.
@phillipthethird42
2 ай бұрын
I think it's worth a try for me. I have a table saw with a rusty table. I'll shoot a video , and let's see how it does.
@jonathanreed5068
2 ай бұрын
White vinegar can also be used to clean certain plastics that otherwise would be harmed by cleansers such as bleach or ammonia. Plastics housing electronic sensors or heating elements, for example. One part vinegar, five parts water, a pinch of baking soda, and one drop of dish detergent as a surfactant. Put the mix in a spray bottle, spray, and wipe the plastic with paper towels. This is how I clean my bidets which have sensors and electronics within the plastic surfaces. The efficacy of white vinegar is practically endless. It's tasty on cooked greens, too!
@johnwilburn
2 ай бұрын
Nice Segway from cleaning bidets to eating greens.
@jonathanreed5068
2 ай бұрын
@@johnwilburn Greens are the reason I have to clean the bidets... 😆
@kathleenmann7311
2 ай бұрын
I’m gonna try that on the Very rusty cast iron pots
@johnwilburn
2 ай бұрын
It’ll do it.
@johnelliott7375
Ай бұрын
We are going to find out!
@johnwilburn
Ай бұрын
59 seconds later, we did.
@aarongjermundson4185
2 ай бұрын
I am surprised. I didn’t think vinegar was that aggressive.
@johnwilburn
2 ай бұрын
I probably had decent results in 3 days, but I just took them out the day I wanted to make this short.
@outfitsgarage88
2 ай бұрын
I've cleaned skills un vinegar and water 50/50 mix and a few days pull it out hit it with a wire brush
@brookelord3448
2 ай бұрын
Add salt to increase the efficiency.
@johnwilburn
2 ай бұрын
What does the salt do?
@cliffhooper3558
2 ай бұрын
@@johnwilburn creates hydrochloric acid. If you add a small electrical current you could go from 6 days too hours
@johnwilburn
2 ай бұрын
@@cliffhooper3558a wire wheel will go to minutes 😂.
@wendyenglish1403
2 ай бұрын
I might have to use that on some thing 😂😂
@stannelson2582
2 ай бұрын
What no baking soda for the science project lol
@HBSuccess
2 ай бұрын
Honestly quite surprised. But I don’t want to wait a week.
@johnwilburn
2 ай бұрын
I had great results leaving some rusty taps and dies in for four days. The sockets could have used a little more. Experiment with it. Better than grinding on some things.
@JimsFastbackGarage
2 ай бұрын
If you have lite scale on metal( like a cheap plaited hinge or coins) and don't want any scuff marks try using ketchup.
@johnwilburn
2 ай бұрын
This doesn’t make any scuff marks… it’s all in how and if you want to brush on it. I wipes these off with a soft nylon tire and wheel brush.
@JimsFastbackGarage
2 ай бұрын
@johnwilburn I agree, John. I totally botched that comment. So, for someone who has a small job and can't submerge the part, ketchup will stick to it and has the vinegar in it to do the work. Multiple applications might be necessary, though.
@johnwilburn
2 ай бұрын
@@JimsFastbackGarageI’m glad we’ve got options!
@nakahili539
2 ай бұрын
Coca cola always works
@chrisdaniel1339
2 ай бұрын
Get higher concentration white vinegar and it should work quicker with even better results
@johnwilburn
2 ай бұрын
That was straight from the jug. The tools were probably this clean in 4 days. I didn’t look.
@chrisdaniel1339
2 ай бұрын
@@johnwilburn You can buy 30-75% concentration acetic acid white vinegar or cleaning vinegar, where as grocery store vinegar is only 5% acetic acid
@johnwilburn
2 ай бұрын
@@chrisdaniel1339I saw it was a fairly low concentration. But it works fine. I’m good with the time it takes. Good info, though.
@johnelliott7375
Ай бұрын
I will say that it works wonders did it take the whole six days to work or did you leave it in extra for the extra shine?
@johnwilburn
Ай бұрын
I soaked some stuff for 3-4 days…. Only left these things this long because of what day I needed to make a short.
@UnfinishedProjectDartSport
2 ай бұрын
Dart Sport!!
@RobsRods
2 ай бұрын
I bet the dart would do it faster 😂
@UnfinishedProjectDartSport
2 ай бұрын
@@RobsRods 🌽💨
@crazytrain7114
2 ай бұрын
Yes it does! Works awsome on foot fungus, too, lol. In boots for 16 a day, 2 cups vinegar, 1 cup peroxide, hottest water you can stand. Soak until cool. 3 days your nails are clear, and your feet dont itch. My dr told me this, commercial shit is steroid, not good for ya at all.
@johnwilburn
2 ай бұрын
That’s cool. Thanks for the info.
@petergreenwald9639
2 ай бұрын
Wait! Are you talking about fungus infected toe nails? When they get thick and dark?
@crazytrain7114
2 ай бұрын
@@petergreenwald9639 lol, yes,that too. My feet used to be totally messed up to the point I went to my dr for a prescription.
@jobieheiser443
2 ай бұрын
@@petergreenwald9639 It should work for that, yes. When I played football in HS and College, I always used a diluted hot vinegar bath to combat athletes foot. It leaves your skin SUPER dry though, so using some unscented lotion or moisturizing soap afterwards is a good idea.
@petergreenwald9639
2 ай бұрын
@@jobieheiser443 I will give this a try. Thank you! My toe nails got so horrible I have to cut them with electricians diagonal cutters.
@autosalvage
2 ай бұрын
Aso approved lol
@jbslittleshop2897
2 ай бұрын
I’m not that patient!!😂😂
@RobsRods
2 ай бұрын
I'm not surprised 😅
@johnwilburn
2 ай бұрын
But there’s nothing to do….. throw them in there and set a reminder on your phone for later.
@jbslittleshop2897
2 ай бұрын
@@RobsRods 😂😂
@RobsRods
2 ай бұрын
@johnwilburn I had to take a shit at JB lol don't get that opportunity very often 😂
@jbslittleshop2897
2 ай бұрын
@@RobsRods 😂😂😂
@UnfinishedProjectDartSport
2 ай бұрын
Very Patriotic!! 🇺🇸🎉
@johnwilburn
2 ай бұрын
That one will filmed here in a few minutes.
@johnwilburn
2 ай бұрын
Dart Sport!!
@michaelmcdonald5385
2 ай бұрын
Absolutely not, way too slow.
@johnwilburn
2 ай бұрын
I just did this to show results. Depends entirely what I’m working on whether or not I do it this way.
@donewithyoutube275
2 ай бұрын
Electrolysis is way better and faster and cheaper. And it won't dissolve any of the metal like vinegar will
Пікірлер: 72