Welcome to my KZitem Channel, which primarily specializes in do-it-yourself projects from vehicle repair to woodworking. The current video shows you how to repair a rearview mirror after the adhesive drys out, allowing the mirror to tumble off the windshield. I used a Permatex mirror adhesive kit, part number 09102, that I bought at a local Walmart; however, other brand kits will also work. Furthermore, the procedure is easy to accomplish even without much experience working on cars. For your convenience, I have included time stamps below.
1. From 00:00 to 00:22, the video's subject is introduced with a quick look at the mirror adhesive kit and the rearview mirror.
2. From 00:23 to 00:38, the windshield is marked with masking tape on the outside to ensure the mirror is correctly positioned upon installation.
3. From 00:39 to 01:21, the Permatex part number 09102 rearview mirror kit is opened, and the contents are shown.
4. From 01:22 to 02:25, the old dried-out mirror adhesive is removed from the windshield.
5. From 02:26 to 02:52, the mirror button is removed from the mirror.
6. From 02:53 to 03:48, the mirror button is sanded to remove all traces of the old adhesive.
7. From 03:49 to 05:05, the windshield and the mirror button are cleaned using alcohol pads included in the mirror adhesive kit.
8. From 05:06 to 05:55, the mirror activator is applied to the windshield and mirror button.
9. From 05:56 to 07:13, one drop of the mirror adhesive is applied to the mirror button, and the button is firmly held against the windshield until the bond is set.
10. From 07:14 to 07:32, the mirror is installed on the button.
11. From 07:33 to 8:00, the masking tape installed earlier is removed, and the mirror sensor is plugged back into the mirror electrical socket.
Thank you for watching.
Негізгі бет Автокөліктер мен көлік құралдары Windshield Rearview Mirror Repair Because of Bad Glue, All Steps Shown using a Mirror Adhesive Kit
Пікірлер