Hi there!
In this video I show how I have repaired a loss of water in the windshield washer tank of a citroën C5 I.
The deposit is located under the right headlight. To perform this operation, the bumper must be removed.
I have made the repair with polyurethane, since the joints, although they had cracks, were still flexible and the tank had cracks.
I do not recommend performing this operation with polyurethane in modern vehicles, since, in case of needing to replace any part, it is very possible that we break them.
The tank has a liquid sensor and a water pump. To repair it, it is necessary:
1. Remove 2 screws that the tank has.
2. Disconnect the electrical connections of the sensor and the water pump. And an existing backup connection, in my case.
3. Disconnect the water pipe from the water pump.
4. Remove the screw from the water inlet pipe to the tank.
5. Paste the joints with polyurethane, if you use the old ones. If you buy new joints, do not use polyurethane.
6. Paste the sensor and the water pump. Only if you are convinced that you will not change it again. Finish the joints externally. If you buy new gaskets, do not glue the elements with polyurethane.
7. Fit the inlet tube and put polyurethane.
8. Fit the tank and finish the polyurethane joint of the inlet tube.
To finish the joints with polyurethane, I recommend using rubber gloves and use a finger to finish them.
I hope it helps.
If you liked it, please suscribe you in my channel and give it a like.
Thank you!
Enrique
Негізгі бет Автокөліктер мен көлік құралдары Windshield washer water tank citroen C5
Пікірлер: 4