How did they (whoever mated the trans to the engine) NOT notice that the input shaft didn't match the clutch splines?...
@QueenCitySpeedShop
5 жыл бұрын
My favorite Snap-on tool is this week is my CJ2000SB puller set with cabinet. I had the cabinet custom painted to match my Cranberry box. Wanted one for at 20+ years and now I have it.
@slim8270
5 жыл бұрын
My go to tool is Snap On's FX80 3/8" drive locking flex-head ratchet. I prefer the Snap on non-comfort grip line up when working in tight quarters, it gives a bit more room to work.
@TheMot616
5 жыл бұрын
That electronic torque wrench looks pretty accurate and easy to use in small spaces.
@jan80862
5 жыл бұрын
The magnetic pocket screwdriver you get for free always getting new ones
@Honcho-mf8lf
5 жыл бұрын
My go to is definitely the 3/8 long and standard flex ratchet! a close 2nd would be my 1/4 flex.
@frankrizzo5057
5 жыл бұрын
My favourite would have to be a toss up between the newest storage chest with the wheels and tires from the street and the MIG welder with the auto settings.
@coreysuttles1362
5 жыл бұрын
Love this series!!!! My go to gets abused and used to its fullest potential every day tool is my 25" locking flexhead ratchet!!! I love that ratchet more than anyone should ever love a tool!!
@justinboyle1680
5 жыл бұрын
My favorite is my TX72. It fits EVERYWHERE I need it to, I love the locking mechanism, and it's broke bolts loose me lesser brand ratchets couldn't. I seriously use it daily.
@JDMdrifterboy7
5 жыл бұрын
Can't wait to see a full walk around video!
@braydenbramlett9518
5 жыл бұрын
Best tool is the 3/8 drive locking flex head with the comfort grip. Use it on a daily basis
@wftseriously6694
5 жыл бұрын
Can't go to work without 1/2 inch drive flex head SHLF80A best ratchet ever made
@GCraigmile
5 жыл бұрын
O’look!! Some guy that knows NOTHING about tools!!
@wftseriously6694
5 жыл бұрын
Sorry fanboy SHLF80A
@maxvolovich9407
5 жыл бұрын
I am glad I did not watch this at home with the wife watching me watch this I would be living in that box that i would love to get
@maxvolovich9407
5 жыл бұрын
My 14.4 set is my bread and butter makers ratchet 3/8 impact and long neck 3/8
@RhBKeith
5 жыл бұрын
Question: when you drill the million holes in the frame/chassis to mount various things, do the holes get treated with anything like paint/grease etc? Love these videos plus the garage series.... My favourite Snap-on tool is the distributor wrench-can’t beat it.
@jgarcia108
5 жыл бұрын
I use nothing but Snap-On, great tools and they can take the abuse and everyday real use!!, I have a Kenvin Harvick Rookie toolbox from back in 2001-2002. I WANT A EUV, I need more room!!!! Awesome build!
@marksdiygarage249
5 жыл бұрын
My go to socket when I drop a transmission out of a car is my Snap On FS18A 9/16 flex socket. My other favorite Snap On tool is an old pick aet handed down to me...a PAK560051. It's a 4 piece pick set.
@MegaScott
4 жыл бұрын
While working at my job as an Electrician at Boeing, the Snap-on Torque wrench with Light's, Vibration and Sound is my "go to tool".
@pauljames1978
5 жыл бұрын
5:54 I like that welding helmet its called the Morbid >> shop.snapon.com/product/EFP2MORBID its a auto darkening welding helmet like my 3M Speedglas 100 Welding Helmet that i used when i was working in a air vent factroy for 4 years
@jimysk8er
5 жыл бұрын
Could you guys please sort your from the ground up playlist so that viewing is done in chronological order? It's weird having to hit previous every time I want to watch the next video.
@Bigborerevolver
5 жыл бұрын
Carbureted with this thing having AC an all the proven EFI choices availible today? come on!
@frankrizzo5057
5 жыл бұрын
My go to tool is my small ratchet set as I use it when building bike.. I often rebuild old bikes and need the compact size for the tight areas and the strength for the nuts that have been on there for 40 plus years.
@zakk5938
5 жыл бұрын
The only snap on tool I currently own is a 3/8 ratchet that my grandfather gave me when I graduated. Would love the socket set to go with it.
@teranceyahize6937
5 жыл бұрын
Flank drive plus ratcheting wrenches are my go too everyday first tools to go in my tool bag
@georgef1176
5 жыл бұрын
My snap on ratchets are the best. Fast ratchet and never break. I put bars on my 3/8 and use it as breaker bar and I’ve never had an issue
@rafatrill
5 жыл бұрын
Is there a additional KZitem channel with more indepent videos on the build.
@chrisr1929
5 жыл бұрын
Midlength 3/8 6pt metric sockets are my mostly used tools.
@BassKingTV-ni6zd
5 жыл бұрын
Pwz 2 makes my life so easy for pulling of boom filters on putizmister
@darrendrew3865
5 жыл бұрын
All my snap on tools, but most used would be my 3/8th ratchet.
@dustinkinard4032
4 жыл бұрын
Snap on Flex head ratchets are 💯 the best next to all snap on haha love the build
@joeypiccolomini9104
5 жыл бұрын
Using my snap extra long 3/8 handle ratchet daily
@michaelalligood5809
5 жыл бұрын
eect900 circuit tester for sure! Way better than power probe
@ryanmullen4482
5 жыл бұрын
My favourite tool has to be the 1/4 flex head ratchet
@josephgrammar6694
5 жыл бұрын
1/2 digital torque wrench
@encampmentify
5 жыл бұрын
My 3/8 14.4 impact 👊🏻👌🏻
@thund3rcat321
5 жыл бұрын
Ph3050 air hammer. Best in the biz!
@jaredb9504
5 жыл бұрын
My got to is the 3/8 14.4 electric ratchet
@tylernol42689
5 жыл бұрын
My 3/8 6 point metric deep socket set.
@patrickfitzhugh2995
5 жыл бұрын
I always use my 3/8 flex ratchet
@joesheppard8000
5 жыл бұрын
The build, tools are impressive
@lukelanam6045
5 жыл бұрын
I dont have any snap on tools but i wish.
@jackduffy5493
5 жыл бұрын
My go to is my snap on 3/8 long ratchet
@rafatrill
5 жыл бұрын
I dont own snap on tools can't afford them
@RayRay-qt2ew
5 жыл бұрын
My long flex head 1/4 ratchet
@jackdipper7686
3 жыл бұрын
Ratcheting wrench flex head.
@edwardpalau8098
5 жыл бұрын
I like Butane gas soldering iron kit
@carloscontreras284
5 жыл бұрын
My favorite tool is the 3/8 ratchet
@Isaac-wm5hq
5 жыл бұрын
My flank drive plus spanners
@zaccook9515
5 жыл бұрын
Air ratchet is my favourite
@g5spfan
5 жыл бұрын
3/8 comfort grip ratchet
@ShouldWeStrapIt
5 жыл бұрын
The 14.4 3/8 impact
@supdus
5 жыл бұрын
i have ever owned a snap on tool
@rflbotello
5 жыл бұрын
Beutiful car the EUV
@Omri.Collects
5 жыл бұрын
No snapon engine hoist?
@luigitorchia8866
5 жыл бұрын
My go to Snap-On tool is the 3/8 drive long flex ratchet with red soft grip. Ratchet number FHRLF80A . The best flex ratchet out there.
@dtreuro7165
5 жыл бұрын
Go to tool/tools are the Snap On metric reversible ratcheting wrench’s. Small box end, way better then other brands for getting into tight place’s.
@panel11111111
5 жыл бұрын
I only have a flat blade screwdriver in the Snap-on brand. Just slow on building up my kit.
@mitchsalo4828
5 жыл бұрын
Hands down my 1/4" and 3/8" universal sockets. When you need them, you NEED em.
@obilingful
5 жыл бұрын
My favorite is the 10in adjustable wrench, thing is amazing!@ SNAPON
@stevenwysocki474
5 жыл бұрын
Honestly your adjustable wrench, a friend recommended and I will never use another brand again
@jgarcia108
5 жыл бұрын
I wish I could afford one of those new EUV, one of the tech at the local Dodge dealer just got one in the green and it is awesome!!!
@Westendorp86
5 жыл бұрын
My cordless 3/8 14.4 ratchet & impact are constantly being used.
@144019jans
5 жыл бұрын
I love snap on ratchets any and all of them are great love the flexhead longneck 3/8 the most i think though
@hubcity091
5 жыл бұрын
Go-to is my 3/8 long handle flex head what would I do without it go team snap on @SnapOn
@matttraverson910
5 жыл бұрын
My go to favorite is the flex head 3/8 ratchet... Go Team Snap On
@julianmaga9632
5 жыл бұрын
My 3/8 14.4
@justinbritten4476
5 жыл бұрын
3/8” Flank Drive Semi-Deep Impact Swivel Sockets
@JoeLafary20
5 жыл бұрын
My favorite tool is the mg725 air gun. Love the power.
@kylesuffa9034
5 жыл бұрын
My favorite snap on tool is my 3/8 ratchet with a black hard handle
@kevinchan6192
5 жыл бұрын
My go to Snap-On tool is the FBF80 3/8 ratchet.
@tcasey9792
5 жыл бұрын
Flank drive plus combination wrenches
@softplasticsfishn
5 жыл бұрын
Favorites are - flank drive ratching wrenchs standard and metric
@restorods3374
5 жыл бұрын
3/8” swivel head comfort grip ratchet
@ranimartinez1375
5 жыл бұрын
To pretty for my work shop or maybe I’m jealous:)
@willyqueen4066
5 жыл бұрын
Thanks great video and my is old 1\4 ratchet .
@aaronspanswick1433
5 жыл бұрын
My 3/8 long flex head! So versatile!
@saadaqh2293
5 жыл бұрын
My long flex head 3/8 ratchet I was every day love it
Пікірлер: 85