If you want to upgrade to Gamin LiveScope Plus, check out these options: Gamin 1022 LVS 34 Livescope Plus Bundle - bit.ly/1022LSbundle LVS 34 Only - bit.ly/LVs34
@Michaelpruis
Жыл бұрын
After you calibrate, it will also show the beam on your maps (if you're using garmin)... which includes any networked units as well... makes offshore fishing your waypoints a breeze
@CAN43725
Жыл бұрын
Hey Rich, I noticed you used your trolling motor to move boat while calibrating when Garmin says if livescope is attached to trolling motor, deploy and turn off. So the way I understand it, if you have LVS 34 transducer installed on trolling motor shaft, do not use trolling motor to turn boat and instead use outboard motor. Is that correct?
@HellaBass
Жыл бұрын
I did read that, but right or wrong disregarded that 🤷♂️
@lilbeckham9
Жыл бұрын
If it's a brushless motor like the Garmin you can use it. The ultrex and similar motors can interfere with the compass during calibration
@HellaBass
Жыл бұрын
@lilbeckham9 mine is on shaft not on motor, might help a bit
@joewinkler2168
Жыл бұрын
I have done it both ways, with the big motor and with trolling motor and both have worked with all my units
@HellaBass
Жыл бұрын
@joewinkler2168 good to know Joe
@TheTinHorseMonty
Жыл бұрын
Almost did this video last year. I honestly, never use the compass. I'm just looking at the screen for fish regardless of their orientation to the earths magnetic field. I'm sure it's useful if one is using a Garmin chart. Good video and wishing you calibrated success!!! 😊😊
@HellaBass
Жыл бұрын
Can't hurt to be calibrated, right?
@williamd.newsome5199
Жыл бұрын
Didn't read all of the comments, so this might be in someone else's comment. The compass direction only matches the trolling motor direction(assuming transducer mounted on trolling motor shaft) when the boat is facing NORTH. You will notice that the compass will differ from trolling motor direction as you turn boat away from North. The cure for compass and trolling motor sync in all boat directions requires installation of a "Heading Sensor". That information is from Garmin support. Another $150 investment to get their equipment to work right.
@HellaBass
Жыл бұрын
Yeah I have the direction puck for my Bird, that's how I line up on stuff
@NeilGraham.I.M.F
4 ай бұрын
Maybe that's why mine was acting the same way. I was worried thinking something was wrong with the transducer. Kept restarting the graph and hissing with it. Though I will say I don't ever remember seeing it say calibrate in my installation settings
@rogerdudra178
Жыл бұрын
It appears that learning how to use this fish finder is much like learning a new video game.
@kevinlynch6799
Жыл бұрын
For the last 20 years Marine Electronics require “tweaking”. To maximize your Electronics, you may find “tweaking” multiple times per day critical depending on depth, bottom ….. Almost no different than changing rod/reels/lures depending on conditions.
@danielt3425
Жыл бұрын
I think I calibrated mine seems like mine gave me a prompt to calibrate it when I first installed
@kathyg4906
2 ай бұрын
I’m going to calibrate my Garmin. There is a beam calibration I need to do as well. Thanks!
@HellaBass
2 ай бұрын
Tight lines
@af4od02
Жыл бұрын
My livescope was installed by some technicians in a metal building. They installed it and I have gone fishing. I will try this calibration tomorrow.
@lelandblanchard4216
Жыл бұрын
Just a heads up every time you switch live scope direction, forward to prospective or to down view garmin recommendations are to recalibrate. One reason I don’t calibrate at all.
@HellaBass
Жыл бұрын
Thanks for the info!
@neverhomeguideservice
8 ай бұрын
Good necessary info!!!
@HellaBass
8 ай бұрын
Glad you think so!
@timtweet8149
Жыл бұрын
Cool info! I'll have to remember that when and if I ever get a boat. Thanks Rich.
@ZZ430T56
3 ай бұрын
The compass does not work without buying a heading sensor. No way the Livescope knows which way the bow is pointing. Also the View should always be on manual and you choose for Forward, Down, or Perspective.
@HellaBass
3 ай бұрын
Got it
@razzso1482
17 күн бұрын
Thank you
@dennisneikes7215
Жыл бұрын
Thank you, I’m considering getting Livescope . Tryin to get educated first. Who sell’s forward imaging for dumbies? Hummingbird Garmin etc.
@codythron5307
5 ай бұрын
Didn’t the directions say with trolling motor OFF, and deployed.
@wickedbassn
Жыл бұрын
Ive tried to calibrate mine like 8 times, and something always messes up. I only use my 1222 for livescope, so Ill have to go without it. 🤷♂️
@glenncollins9994
11 ай бұрын
0:09 doesnt work. Maybe Garmin will fix and update.
@HeeyManFishing
Жыл бұрын
You TM should be off. Turn off. Use your boat motor.
@Randy-gz8eu
5 ай бұрын
Dude it says on your screen , Trolling motor should be off ?
@zanebugg7536
3 ай бұрын
How is your voltage at 17 volts???
@HellaBass
3 ай бұрын
I run a dedicated 16v PowerHouse Lithium battery for electronics kzitem.info/news/bejne/l4qeu4uBi2qba4o
@richardjurgens4511
6 ай бұрын
Hmmm, wonder what those things called instructions were for……
@HellaBass
6 ай бұрын
what percentage of people read those?
@richardjurgens4511
6 ай бұрын
@@HellaBass obviously you didn’t
@davidwilliams1805
Жыл бұрын
Great information buddy! Thanks for sharing! #HellaBass rocks!
@BindeeVangFishing
Жыл бұрын
good info rich!
@rogerdudra178
Жыл бұрын
Greetings from the BIG SKY.
@dong8307
Жыл бұрын
Damn, didn’t know that either. Thanks for sharing and will use this video to assist next time I’m on the water.
@jackdotzman2908
4 ай бұрын
Fishing isin’t a computer game. You can put that Livescope where the sun don’t shine Bubba. Trying to outwit one of Mother Natures Creatures with electronics device is so disrespectful to wildlife it’s unbelievable. Take away your electronic fishing toys and you couldn’t catch enough fish to feed yourself.
@HellaBass
4 ай бұрын
You clearly haven't watched my videos before. I think I've weighed one fish from my scope in 2 yrs that I've had it in tournaments 😁
@davidbmullis
Жыл бұрын
How is your LVS34 mounted? I don't believe this calibration will work if your LVS34 is mounted on your trolling motor barrel.
@HellaBass
Жыл бұрын
its mounted on the TM shaft, not the lower unit it self
@ShaneJMcNair
Жыл бұрын
Some very good information, thank you for sharing...
@garylittle7960
Жыл бұрын
Your scope screen is displaying just over 17 volts. What is your power source to get 17 v?? We’re running 2 12 v lithium in parallel and shows 13.2 on full charge.
@HellaBass
Жыл бұрын
Running a 16v PowerHouse Lithium setup, here are the details - kzitem.info/news/bejne/l4qeu4uBi2qba4o
@kcoutdoorsmissouri4052
Жыл бұрын
What is the purpose lol
@Texcajun06
10 ай бұрын
Not sure if it's kosher, but I calibrated my Minn Kota TM compass in a parking lot. I have a large flat empty parking lot near me and while my boat was on the trailer, I used the truck to move the boat in a circle. Suspect it'll work on Garmin LiveScope as well. I just gotta find out.
@HellaBass
10 ай бұрын
Try it out and report back please
@murderman424
Жыл бұрын
What kind of mount do you have for your LiveScope Transducer?
@HellaBass
Жыл бұрын
It's the standard shaft mount that comes with LVS34
@tjs5979
3 ай бұрын
This is great for night fishing. My arrow light on the trolling motor is super dim. It can be tough to orientate your cast. If calibrated correctly you always know which direction to cast in the dark.
@HellaBass
3 ай бұрын
Very true!
@mrlrgmouth3692
8 ай бұрын
How do you think that it right .the directions say the trolling motor should be off and deployed. Meaning you mush use your engine to turn you in circles.wtf
@HellaBass
8 ай бұрын
My assumption the issue with trolling motor is when transducer is mounted on lower unit of trolling motor not the shaft
@bkellykelly25
10 ай бұрын
Didnt it say trolling motor should be off and deployed? You turned it with trolling right?
@HellaBass
10 ай бұрын
Right or wrong I interpreted that for when mounting on lower unit of TM not shaft, expecting the rotation of magnets and brushes in close contact wad the issue
@sprinter144
5 ай бұрын
I noticed in the video your boat was pointed north so with north up everything was in agreement. Had your boat been pointed a different direction does that add confusion?
@HellaBass
5 ай бұрын
Not sure
@bobbycolson1957
7 ай бұрын
When i locked north up its turning opposite what the head is??? But i can see a crappie jig so the tranducer is where it should be ...what could this be
@HellaBass
7 ай бұрын
not sure....
@djboogiejay1616
Жыл бұрын
Very helpful! I don’t have livescope yet but I’m cataloging this video for when I purchase mine
@HellaBass
Жыл бұрын
Glad it was helpful!
@RICHJMS
6 ай бұрын
Does it matter what direction the transducer is pointing???
@HellaBass
6 ай бұрын
I'm not sure what you're asking or mean
@cbenninger
6 ай бұрын
Does this apply to people who have the transducer attached to a pole mount instead of the trolling motor?
@HellaBass
6 ай бұрын
good question, I would think so
@bobbycolson1957
8 ай бұрын
Thanks rich I had done this but missed the north up part and couldn't figure how to make the beam icon spin
@HellaBass
8 ай бұрын
So many options on these silly things lol
@johnharris-pn5vy
Жыл бұрын
Now if you're boat is pointing north it will show the same direction on the screen , but if your boat is pointing south and your beam is pointing south it will be showing it's point behind you on the screen right?
@CathyBrumley
6 ай бұрын
yes that is what i experienced.
@Gobert27
Жыл бұрын
Have you noticed any extra screen quality with the added voltage?
@stevenjones618
Жыл бұрын
I've seen a few videos of different voltage and any thing over 12 volts you rely can't tell.. but I have heard guys using 18v up to 20 volts. The livescope says voltage is 12.5 to 30 something...
@Murphydoge
9 ай бұрын
Garmin suggests using your main engine as the electric trolling motor messes with the magnetic field
@HellaBass
9 ай бұрын
I just assumed that is when you attach transducer to the lower unit instead of the shaft
@johng8049
8 ай бұрын
um it says right there on the screen The trolling motor should be OFF and deployed IE you use the gas motor to make the turns.You dont use your TM to do this the magnetic interference from it could give bad results. See kids reading is fun The beam icon will not point in the direction of the transducer until you install a steady cast
@HellaBass
8 ай бұрын
You don't think that is mainly for mounts on the motor itself vs the shaft mounts?
@johng8049
8 ай бұрын
@@HellaBass i think you are referring to barrel mount vrs TM shaft mount it wont matter the mag field from the TM could extend big enough to reach the shaft mount. If your shaft mount set high enough to not be effected then you have it set too high . Bottom line even if doing with the TM works why take the chance when its so much faster with the gas motor.
@cheetoz6902
Жыл бұрын
Why does it say if mounted to trolling motor must be ti Urned off
@HellaBass
Жыл бұрын
I believe that's when you attach to motor barrel where magnets spin, throws it off
@davewilliams3514
5 ай бұрын
That is part of the installation process.
@HellaBass
5 ай бұрын
I don't think people do this on self installs
@westbranchboyz2434
Жыл бұрын
Thanks for sharing !
@johns3292
Жыл бұрын
Excellent!
@chuckheidt4093
6 ай бұрын
Is your Livescope transducer mounted on your trolling motor?
@HellaBass
6 ай бұрын
TM shaft
@chuckheidt4093
6 ай бұрын
@HellaBass I believe the instructions on your graph stated the TM should be off when you calibrate, if transducer is on the TM. I used my gas engine to perform the rotations.
@raywilliams6098
3 ай бұрын
Not very accurate
@HellaBass
3 ай бұрын
✔️
@mrminnihan
Жыл бұрын
Is this necessary if you are using a pole mount instead of mounting to TM shaft?
@HellaBass
Жыл бұрын
Good question, don't think there is a down side to doing it
@TonyGruber2009
Жыл бұрын
Hi, do I also need the Garmin GPS puck for this feature to work properly? Thanks, Tony.
@HellaBass
Жыл бұрын
I don't have a Garmin puck
@TonyGruber2009
Жыл бұрын
@@HellaBass okay, thank you for letting me know.
@ZZ430T56
3 ай бұрын
@@HellaBass Yes you need a heading sensor.
@patrobbins1874
Жыл бұрын
17volts ????
@HellaBass
Жыл бұрын
yessir, running a 16V PHL battery, here is the details on it - kzitem.info/news/bejne/l4qeu4uBi2qba4o
@kouvang590
Жыл бұрын
What about ice fishing? Do we do the same too?
@HellaBass
Жыл бұрын
Hmmm.... not sure how to do it on ice
@chadvansickle1318
8 ай бұрын
Jason young has a video where he calibrates his unit in his house to prepare for ice fishing by just turning it in a circle. Can also do this on the ice which is what i did.@@HellaBass
@jnwalleye
6 ай бұрын
Yeah Okoboji !
@HellaBass
6 ай бұрын
Huh?
@jnwalleye
2 ай бұрын
@@HellaBass Thats where I live
@HellaBass
2 ай бұрын
@@jnwalleyethis was up in twin cities
@RyanCarter-iq6hk
6 ай бұрын
He is teaching you how to cheat
@HellaBass
6 ай бұрын
Absolutely 💯
@OzMan9989
Жыл бұрын
Nobody needs livescope. We’re sick of seeing it. It should be banned from tournaments.
@SkoogsMix
Жыл бұрын
Speak for yourself. You write that everyone is tired of seeing it, that's not true, I think it's very interesting. Are you jealous because you don't have the money to buy one?
@OzMan9989
Жыл бұрын
Don’t be dense. Livescope ruins the sport and I expect it to be banned by tournaments in the next few years as fisherman get sick of seeing its overuse and over dependence. If you need livescope to fish, you don’t know how to fish.
@SkoogsMix
Жыл бұрын
Then you have to ban all echo sounders because you can see fish even with them. Then you don't get a lot of fish just because you buy a live scoop. It is still the fish that decides whether it wants to bite or not. I have been out many times without catching fish. Then you can have competitions with different rules where you allow live scoop or not, it's up to everyone to choose. You fish your way, and we who like technology fish our way. It is the year 2023 now and not 1800@@OzMan9989
@lljustice3877
10 ай бұрын
@@OzMan9989 Provide us some documented data/testing by independent sources from the State & Federal level that FFS is ruining anything. Otherwise sh*t your trap because yours and Randy Blaukats feelings mean nothing to the rest of us.
@daveulrich4623
9 ай бұрын
@@OzMan9989 Just say you can’t afford it man. Do you say the same about 2D sonar, down view, side scan, satellite mapping, spot lock?
@PMantle
Жыл бұрын
I don't find this to be important at all.
@jason6325
6 ай бұрын
Well you're special. It is very important to us normal fisherman. Your just blessed with a super knolageable brain. Why are you even watching this video genius
@PMantle
6 ай бұрын
@@jason6325 I thought I might learn something.
@Oldbasshole
Жыл бұрын
Now I’ve got the knowledge all I’m missing is the boat and electronics !! Lol
Пікірлер: 126