Link to servo used on this project. Any full size servo can be used but I recommend using an all metal gear servo. www.amazon.com/LewanSoul-LD-20MG-Standard-Digital-Aluminium/dp/B073F92G2S Link to the pinion gear used . It's a 17T , 5mm shaft size, 0.8 module. www.amazon.com/Robinson-Racing-Products-Module-Pinion/dp/B0019OHK4A
@rcbustanut2057
4 жыл бұрын
Bro, thanks soo much!!.... I did use an all metal gear servo, might have gotten a dud, cuz it lasted a few minutes, not even running, just during install. I was soo pist cuz i was waiting for a while for it to get here. But i wanted to fit a bigger servo, just wasn't sure how to because of limited space. Thanks again! 👍
@RCinginSC
4 жыл бұрын
😎👍
@rcbustanut2057
4 жыл бұрын
@@RCinginSCThanks again for the link to Amazon, here's a vid of the servo installed. kzitem.info/news/bejne/rJptnouQZmpkgKA I left a shout out to your channel in my description, wish I would have remembered during the video, was racing to get the video done before my 4yr old started getting out of control lol. But thanks again, servo works great! 😎👍
@RCinginSC
3 жыл бұрын
@@rcbustanut2057 Somhow I missed this comment from year ago . Kind of late but I did watch the vid and the servo looks great. I went ahead and subbed you too 👍 I'm glad that worked out for ya. Take care brother.
@rcbustanut2057
3 жыл бұрын
@@RCinginSC lol, thanks, yeah.. I haven't even gotten a chance to upload anything new. Sold our home last year & we literally just moved into our new home 3 weeks ago. 6 days to sell a house, 6 months to buy a new one 🤦♂️ So now I will be back to making vids, got some cool new stuff coming, just gotta finish moving in lol. Happy Bashing Bro 😎👍
@rcbustanut2057
4 жыл бұрын
Bro, thanks soo much for taking the time to make this video and posting it up on KZitem. I have just swapped all the parts from my Traxxas Rustler xl5 to my wltoys 12423, which has the same chassis. The stupid servo has been my headache. I ordered the JX PDI-2504MG which fits perfectly but it died before I even ran it. So i have been thinking how could I fit a regular sized or just frankly a bigger servo in there period. This was super helpful!!! Thanks bro!!.…. I have a channel too, u can see my upgrade on my wltoys on my last video uploaded.
@RCinginSC
4 жыл бұрын
So glad it was helpful. Always good to know someone got something out of these vids. I'll check your channel out too. Dont forget to subscribe for more cool content. 😎👍
@rcbustanut2057
4 жыл бұрын
@@RCinginSC already did!👍😎, thanks again for the info. Got that servo on order, will post a vid of it when I get it in.
@artistman75
3 жыл бұрын
Thanks for sharing, putting a list of the upgraded parts in the description would be helpful.
@RCinginSC
3 жыл бұрын
They are in a pinned comment. Thanks for watching 😎👍
@DJSOULFORCE
5 жыл бұрын
The "MOD KING" strikes again! Great job brother, awesome information. Thanks for sharing!!!
@RCinginSC
5 жыл бұрын
Thx DJ, actually I made this video for a sub who had some specific questions about the servo Mod. I thru in the motor pinion gear as long as I was making the vid. I didn't expect any feedback but thanks for the support as always. You always have kind words. 🤘😁👍
@joetheman74
4 жыл бұрын
They sell 25g metal gear upgrade servos that are 5 wire that work with the stock electronics on Amazon. There are also Waterproof 25G regular 3 wire servos waterproof metal gear digital that fit the stock bracket. Look at the JX Servo PDI-2506MG.
@RCinginSC
4 жыл бұрын
Thank you for the information. Im sure there are some who will be interested in them. Could you take time to post a link to these products for the benefit of those interested. Thank you very much and I appreciate the support you offer. 😎👍
@viko207
5 жыл бұрын
A lot of helpful info here, thanks!
@viko207
5 жыл бұрын
Question: How usable is for slow crawling, is it any good at all? A video on the current setup will be appreciated!
@RCinginSC
5 жыл бұрын
Well, simply put , the lower the kv motor you use, the better it would be at a crawler. I would recommend 1900kv - 2100kv for best results. I have replaced the entire suspension. The stock plastic pieces are only toy grade. Quality oil filled shocks are a must. And lastly , some super soft wide tires (90mm-100mm tall) will complete the deal. I've focused mainly in the fpv aspect of it so bashing it isn't really something I want to do with it.
@octuron4883
4 жыл бұрын
Yur vids cover alot of important shit!
@RCinginSC
4 жыл бұрын
Thank you 😎👍
@EcoSpeeder
4 жыл бұрын
-- Is 17T standard ? I have my WL12428 super dialed in for speed and handling with simple tire, shock and battery mods. Trying to find ways of lowering the gearing ( or enhancing low speed torque ) without altering the motor mount. I would like to enhance it's crawler capabilities.
@RCinginSC
4 жыл бұрын
Yes, 17T is stock. One way to get lower speed is swap motor to lower Kv motor. Thx for watching. 🤘😁👍
@Tagabaryo
11 ай бұрын
Kindly make a video on how to install fpv on you rc. Tnx gonna wait for it
@RCinginSC
11 ай бұрын
kzitem.info/news/bejne/1J94uXiPp3tkjG0 That's all I got. It's really simple. -Power to camera -Power to vtx. Connect the video cable between them. Typically the yellow wire. -Set channel and band and you're good to go
@MsMaco05
2 жыл бұрын
Hey mate. Thanks for the vid 👍 Putting brushless and same servo in atm. Did you find anything different handling wise removing the ballast?
@RCinginSC
2 жыл бұрын
No I did not. Still felt the same. Thanks for watching 😎👍
@kodak_jack
4 жыл бұрын
The link doesn't work anymore, but guys can use the description to get to one.
@RCinginSC
4 жыл бұрын
Thanks. I see that's it no longer available. But like u said, description will steer you in the right direction. Thx.
@georgemathew7463
3 ай бұрын
Is it ok if I use the 5mm .8m 19 teeth pinion gear
@RCinginSC
3 ай бұрын
As long as the module is the same then yes. I'm assuming there should be enough adjustment to move the motor back slightly to accommodate the slightly larger pinion.
@sameuljones5496
4 жыл бұрын
What's the benefit of the longer motor? Would a 3650 with the same KV rating as the new motor give you the same performance?
@RCinginSC
4 жыл бұрын
The longer stator simply gives you better low end torque and less cogging when the vehicle is barely moving. The video was mostly about the installation process and to inform people on what the longest stator motor that would fit . Not necessarily to imply that they should do the same as I did. I had a 3650 in it originally , and it did cog at low speed. The KV rating is also a huge variable too. But, I make these vids to mainly inspire ideas. Not necessarily to push my ideas. Thank you for watching , and thank you for the comment. Have a blessed day my friend. 😎👍
@RADERFPV
5 жыл бұрын
That thing looks like a beast👍
@RCinginSC
5 жыл бұрын
Thx , this just a follow up vid for a sub who had some specific questions. I hope it answered his questions. I didn't really expect a lot of feedback but thx for watching !
@juniorlemke5484
5 жыл бұрын
Where can I get the link kit?
@RCinginSC
5 жыл бұрын
www.amazon.com/Wltoys-Steering-Suspension-Length-Adjustable/dp/B07KPD79VX I assumed you meant suspension links. Hope that helps. Thx for watching.
@joshuamei7465
4 жыл бұрын
Might do this on mine later. Why did you make the new pinion gear a 17t one? wouldn't make it have a lower top speed?
@RCinginSC
4 жыл бұрын
The stock gear is 17t . I kept it stock ratio. Plus I'm running 3s. It's plenty fast.
@joshuamei7465
4 жыл бұрын
@@RCinginSC ok that's why. I have a fy03 and it has a 26t stock pinion with a gearbox. do you think I should change it to a 17t?
@RCinginSC
4 жыл бұрын
@@joshuamei7465 honestly , I would leave it the way it is. If you're happy with the way it performs, there's no need to change it. In the end, it's a toy grade car, if you try to get too much performance out of it, you'll just start breaking things.
@Mingo32
4 жыл бұрын
What reciever did you use? And does it work with the stock transmitter?
@RCinginSC
4 жыл бұрын
At the time I made this video I was using a flysky 3 channel RX. I totally gutted this buggy when I got it so nothing is stock. The link below is a vid I made this past week specifically showing how to upgrade your receiver. kzitem.info/news/bejne/sHuAmKN-oWJem3o
@Mingo32
4 жыл бұрын
Thanks
@lelandeggers5252
3 жыл бұрын
wheres the link to the pinnon gear?
@RCinginSC
3 жыл бұрын
I just added it to the description. Thanks.
@RCinginSC
3 жыл бұрын
www.amazon.com/gp/aw/d/B0019OHK4A/ref=yo_ii_img?ie=UTF8&psc=1 Note: it's a 5mm bore so you will need a motor with 5mm shaft
@RCinginSC
3 жыл бұрын
Plus, they were listed in a pinned comment. I forgot about that.
@kingofkards1110
4 жыл бұрын
Can you put the link for the motor with the esc
@RCinginSC
4 жыл бұрын
I'm sorry but this motor and ESC were bought separately and s while ago. And motor close to the same specs will work and any 45+ Amp ESC will work also.
@RCinginSC
4 жыл бұрын
Here is a link to the motor www.amazon.com/GoolRC-4Poles-3100KV-Brushless-Motor/dp/B00WQYB7OQ The pinion link is in the description. Here's the ESC www.amazon.com/Shaluoman-Waterproof-Sensorless-Brushless-Electronic/dp/B07S74MRNZ
@M.TTT.
4 жыл бұрын
hey there again, does this motor make the buggy faster? Or how did it change the handling overall? Theres alot of people who put in 2838 motors, do you know why?
@RCinginSC
4 жыл бұрын
I'm pretty sure this was a 3100 kv motor. I originally replaced the stock brushed motor with a 4300 kv brushless. That one was way too fast. The 3100kv tamed things down a bit. In case you aren't familiar with kv ratings, the higher the number the faster. The motor doesn't really change the handling but too fast of a motor can make the car hard to control if the suspension isn't setup for a lot of speed.
@RCinginSC
4 жыл бұрын
To answer the second part, I suspect that the 2838 motor you refer to maybe being replaced in a smaller version of the 12428. A 2838 motor would be way undersized for this model.
@M.TTT.
4 жыл бұрын
@@RCinginSC yea i knew KV but wasn't sure on the motor sizes. They're definitely using the 2838 and one said he went 95km/h but thats too fast anyway lol. Yours is faster than stock?
@RCinginSC
4 жыл бұрын
A 380 size motor (28mm) is typical for an 1/18 scale car.
@M.TTT.
4 жыл бұрын
@@RCinginSC yea I'm gonna go with a 36xx motor probably. Was yours faster than stock? Stock speed isnt bad, but a little more torque and top end would be good
@kingofkards1110
2 жыл бұрын
Can u drop a link to esc plz
@RCinginSC
2 жыл бұрын
The one in vid is unavailable so this one linked below is very similar. It's 80 Amp, brushless, and Waterproof. www.amazon.com/GoolRC-Brushless-Waterproof-Electric-Controller/dp/B07SZRW229/ref=mp_s_a_1_6?crid=P9JAV7GJLSUM&keywords=brushless+esc&qid=1640455292&sprefix=brushless+esc%2Caps%2C107&sr=8-6
@ramirsd
4 жыл бұрын
When upgrading the motor, esc and the servo, do I need to upgrade also the controller or can I still used the stock one?
@RCinginSC
4 жыл бұрын
If you upgrade the motor/ESC/servo , it will require a hobby grade receiver to control them . The stock receiver will not be compatible to do these upgrades. Thus , you will need a compatible controller of the same protocol as the receiver. The stock controller will not work. You can find controllers on Amazon that also include a receiver with it . Like the flysky radio which you can find for around $50. Spare receivers are around $10. I hope that answers your question.
@ramirsd
4 жыл бұрын
@@RCinginSC cheers mate.
@mr.steve017
2 жыл бұрын
Huh that pinion says that its a mod .8 i thought wltoys was mod .7 gearing 🤔
@RCinginSC
2 жыл бұрын
Mine is 0.8 , been running it for about 2 years without issue.
@mr.steve017
2 жыл бұрын
@@RCinginSC Awesome good to know for when i get one thanks
@RCinginSC
2 жыл бұрын
@@mr.steve017 just remember that the gear linked is a 5mm bore. I swapped the motor to one that has a 5mm shaft. The stock motor shaft is 1/8" or 3.175mm.
@HomeDronen
4 жыл бұрын
🖐️🤠👍💯%
@stevenpowers9761
4 жыл бұрын
Thanks for telling the pitch! I couldn't figure it out!
Пікірлер: 78