Perfect again. I have 2 favorites: You and your ideas.
@JackMackWoodturning
2 жыл бұрын
Thanks Hagen. Much appreciated, where are you from?
@hagenhoffmann9985
2 жыл бұрын
@@JackMackWoodturning Good old Germany. But don´t worry,
@JackMackWoodturning
2 жыл бұрын
Haha why would I worry? I have been to Berlin, it was a great place to visit. 😊👍🏻
@hagenhoffmann9985
2 жыл бұрын
@@JackMackWoodturning I lived 35 years in Berlin. So why did´n you ring? I would have sincirely acept all your wooden presents for me.
@mark-ut8ft
2 жыл бұрын
Beautiful piece, I really like how the knots contrast with the lighter wood. Great job.
@alansimpson596
Жыл бұрын
Great tool work on a special piece of wood with a beautiful result.
@drferry
Жыл бұрын
Very nice, beautiful burl and great hollowing technique.
@orlandoblake5012
3 жыл бұрын
Great job!! What a masterpiece!
@JackMackWoodturning
3 жыл бұрын
Thanks a lot Orlando. Much appreciated buddy 👍🏻😁
@SilverBack.
3 жыл бұрын
Amazing wood , love the shape 👍👍👍👍
@JackMackWoodturning
3 жыл бұрын
thanks Douglas, cheers for following along 👍🏻
@pinkenbajedi2119
3 жыл бұрын
Nice 👍
@JackMackWoodturning
2 жыл бұрын
😊👍🏻
@saigonngale
2 жыл бұрын
Ooh la la... Maybe Nature herself didn't know how miraculous her creatures are! By the way, should some day you turn a ruffled root having an end of log into A MERMAID with her long tangle hair? I'm eager waiting for that Master Piece. Nice day.
@JackMackWoodturning
2 жыл бұрын
I shall add it to my list 😉
@saigonngale
2 жыл бұрын
@@JackMackWoodturning , Great Great Great, our Artist. Can't wait.
@tfturning
3 жыл бұрын
Love this piece, so much character! Great job! 👍
@JackMackWoodturning
3 жыл бұрын
Cheers dude. Love your work too. 👍🏻
@tfturning
3 жыл бұрын
@@JackMackWoodturning Thank you sir! 😁
@bigsparky65
3 жыл бұрын
Amazing, beautiful vase, fantastic piece
@JackMackWoodturning
3 жыл бұрын
Thanks for watching Jeff, Cheers for the kind words. 👍🏻
@jlyssagraywolf7503
3 жыл бұрын
Gorgeous 💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜
@JackMackWoodturning
3 жыл бұрын
Thanks 😊
@DIMTips
3 жыл бұрын
What a great job. 👍
@JackMackWoodturning
3 жыл бұрын
Thanks 😊
@laurat5143
3 жыл бұрын
I love this 😀, it's beautiful.
@JackMackWoodturning
3 жыл бұрын
Thank you Laura. 👍🏻
@jop4504
3 жыл бұрын
What a stunningly beautiful piece, love it.
@JackMackWoodturning
3 жыл бұрын
Thanks jo ☺️
@denisvienat849
3 жыл бұрын
Très jolie j’adore bravo 👏👍
@beverlylumley4150
3 жыл бұрын
Stunning
@JackMackWoodturning
3 жыл бұрын
Thanks Beverly 👍🏻
@rebeccaloader4111
3 жыл бұрын
This just might be my favorite--so far! Nicely done!
@JackMackWoodturning
3 жыл бұрын
.😍
@SiamWoodShop
3 жыл бұрын
Nice job Jack, the texture and foinish of the burl looks great
@JackMackWoodturning
3 жыл бұрын
Cheers 👍🏻
@DougMilleratWoodSpunRound
3 жыл бұрын
Beautiful burl. You did a very nice job with it.
@JackMackWoodturning
3 жыл бұрын
Thanks Doug 👍🏻
@bradwiebelhaus7065
3 жыл бұрын
Nice
@JackMackWoodturning
3 жыл бұрын
Cheers Brad.
@MoleValleyMaker
3 жыл бұрын
Lovely piece!
@JackMackWoodturning
3 жыл бұрын
Thanks 🙏🏻
@RandallHallKaizenReiki
3 жыл бұрын
Beautiful. I have neither the patience nor temperament to do anything like this. You are quite a skilled craftsman.
@JackMackWoodturning
3 жыл бұрын
Cheers Randy 😊
@aliefazati3244
2 жыл бұрын
👏❤️
@JackMackWoodturning
2 жыл бұрын
Thanks
@cookiescoop6065
3 жыл бұрын
Very beautiful
@JackMackWoodturning
3 жыл бұрын
😊
@margaretcassidy7830
3 жыл бұрын
Did you ever use some of the pieces of wood you had left from this one? They look like nice size pieces. I love the way this vase looks. It's very very beautiful.
@JackMackWoodturning
3 жыл бұрын
I have, I tend to make small lidded boxes with the of cuts of wood like this, For box making it’s best to start with fully dry wood as you don’t want any movement in the wood after it’s been turned. So these pieces are currently in my wood drying kiln. They will be boxes or inlays in the next few months.. I may even make a video of one 🤞🏻🙂
@justjulee9135
2 жыл бұрын
I really loved this birch burl. The pink tone to some of the grain was simply gorgeous! Is this common to all birch, or just the burl. It was a lovely piece!
@JackMackWoodturning
2 жыл бұрын
It really rare in all birch.. definitely not in straight grain wood and not often in burl
@justjulee9135
2 жыл бұрын
@@JackMackWoodturning I guess that was a special piece!
@joshclose4260
3 жыл бұрын
Absolutely beautiful!! stunning form, well done. What gouge did you use for the hollowing?
@andyhutch8262
3 жыл бұрын
Nice.
@JackMackWoodturning
3 жыл бұрын
Thanks Andy 🙂
@spinfieldturners
3 жыл бұрын
I’m never sure how to cut the log to get the most out of a burr to avoid wasting it. Nice one! Hope you managed to use all the offcuts...
@JackMackWoodturning
3 жыл бұрын
Hey malcom, I completely agree, it’s always a battle of ideas. What you don’t see in my videos is the time spent staring at a piece scratching my head and wondering what to make of it. What I would say is to remember that no matter what you start with 90% of the blank will end up as shavings, the key is to capture the beauty of the piece regardless of weather your starting with burl or straight grained wood. The best way to improve is to just get stuck in. That being said I have a whole shelf full of burl that I still don’t feel ready to turn. The offcuts from this piece are in the kiln, drying, and will be used for a resin project soon.
@fredsaysboo
3 жыл бұрын
Another gorgeous piece! You may have said before, but what type of finish do you use?
@JackMackWoodturning
3 жыл бұрын
Thanks Ken, This piece was finished with shellac and microcrystalline wax. Cheers for following along. 👍🏻
@donaldvincent
2 жыл бұрын
This log started out ALMOST as big as my head.
@JackMackWoodturning
2 жыл бұрын
Haha you must have a rather large cranium 😂
@pinkenbajedi2119
3 жыл бұрын
I’ve got a big chunk of burl the guy I bought my lathe from gave me, way to big for my current lathe. I was going to cut it down but this piece makes me think I should wait till I can afford a bigger lathe and make the most of it 🤔
@JackMackWoodturning
2 жыл бұрын
Yeah sounds like a good ca Jed 👍🏻
@chrischarlton1033
3 жыл бұрын
Great piece Jack thanks for sharing. could I ask what the chisel was you were using at the end please?
@JackMackWoodturning
3 жыл бұрын
Hi Chris, the chisel is an attachment for a rotary tool. You can find them by searching “power chisel” @axminstertool s sell them here in the uk. Thanks for following along and cheers for the kind words. 👍🏻
@davetyler8214
3 жыл бұрын
Nicely done!!! Can you put up a link to that electric chisel you have? I sure like the looks of that thing.
@JackMackWoodturning
3 жыл бұрын
If you hope over to my Instagram and send me a direct message il send you the link. I can’t put links to products on my channel just yet. Thanks for watching. 🤙🏻
@nancyneff4118
Жыл бұрын
What brand of power carver do you use?
@JackMackWoodturning
Жыл бұрын
The Dremel? I think you might like my new vid. kzitem.info/news/bejne/mnlm15OMhYyjm5g 😊👍🏻
Пікірлер: 76