No joke..thats dedication to quality content and viewer understanding right there
@---l---
10 ай бұрын
The amount of work for a 10 second shot. Incredible.
@rayleder3705
10 ай бұрын
Frank is the Steven Spielberg of filming woodworking!
@edwardabel3716
8 күн бұрын
Frank, I appreciate your thought process and you sharing your “mistakes” as a learning experience. You thoroughly investigate your errors and show your audience your lessons learned. I am an Engineer so I am often analyzing my actions.
@andrewmullen4003
10 ай бұрын
Your animation and stop motion film making is now almost on par with your wood working skill, which is outstanding, lovely bowl Frank.
@Docstantinople
8 ай бұрын
Man you are a wood worker, cad design specialist, cnc operator, stop motion prodigy and Moby lookalike. You are awesome Frankie! 😅
@st.f4530
10 ай бұрын
Your perseverance and patience are incredible! Nothing seems to frustrate you so much that you throw everything in the corner and give up! My respect!
@scotter_dotter
10 ай бұрын
Frank just took it to another level, Again.
@ThompsonsWorkshop
10 ай бұрын
It's a good start to the day when Frank posts a video. Keep them coming!
@johnritchie3889
10 ай бұрын
Frank - I love the stop motion and animation in this video. Great job letting us see what’s going on inside the piece.
@dirktermagant5629
10 ай бұрын
Love watching a master of their craft problem-solve their way to learning a new skill.
@glass1258
10 ай бұрын
Frank you’re a genius
@austinsand8163
10 ай бұрын
I loved the real life section view sweep on the first failed attempt.
@linkinprk1981
10 ай бұрын
Every time I want to do an inlay i have to go back to a video i watched that very clearly laid it all out for me - it wasn't nearly as complicated or hacky as yours, but maybe I wasn't doing as deep of an inlay that it mattered? This is the tutorial i have bookmarked as a refresher each time -- The VCarve Inlay Technique by Shawn Gano
@harrisric128
9 ай бұрын
You saying, " you didn't think far enough ahead" makes me feel like I'm just winging it with every project. Great work🤙🏾
@tomasjosefvela1
10 ай бұрын
Mr. Howarth , you are my hero! thanks for sharing.
@reginalawson3438
10 ай бұрын
Well that wasn't a video, but a Show!! Its truly a labor of love. Beautiful Platter!!
@1johnnycentral
10 ай бұрын
My god frank, you make everyone on KZitem, woodworkers film making look like amateurs. Amazing work as always. Love your videos, and cant get enough of watching them, i always end up going back to your older videos and watch them again for the 10th time
@hitnorcal
10 ай бұрын
i have really enjoyed watching the production value of these videos increase over time. they're just fun to watch.
@wouldntyaliktono
10 ай бұрын
That stop-motion of the cross section of the test piece was amazing. Reminds me of the "WoodSwimmer" video.
@danmooney7192
10 ай бұрын
I think it's safe to say , that you're on another level than the rest of us!
@peterharkness3547
9 ай бұрын
Fascinating, whilst I sit drinking my coffee. 😀
@andrewoatman6745
7 ай бұрын
Im glad that you figured out the issue and impressed and pleased that you kept plugging away at it until you had something. Weaker willed folks might have given up. I also enjoyed the recurring theme of tossing the work piece onto a surface and letting the autoclamps do the rest. Ive been watching you for 7 years and its still fresh and new yet familiar and comforting. Keep up the good work.
@markhagen7777
10 ай бұрын
It’s always fun to see where your whimsy takes you
@robertcotrell9810
10 ай бұрын
The production quality is always a joy to witness!
@sapelesteve
10 ай бұрын
Fantastic work as usual Frank! That bowl really turned out looking great! 👍👍
@Via-Regia
9 ай бұрын
This is a beautiful piece of art….😮
@lisahodges8299
10 ай бұрын
No words suitable. I enjoyed that. Birdy
@justindesilets3526
10 ай бұрын
in the future, no need to have a symmetrical shape, you just need to mirror the inlay and use this mirrored shape to program the cnc. when you actually "rotate" the part to glue it in, it's kinda mirroring it again so it fits perfectly!
@billysmether6237
10 ай бұрын
Gave up on clamps long ago. I just screw the work to the machine bed. Easy and quick. No obstacles. Inlays are about the bits and the depths. You should make a wood "press" to glue the inlays (like a sandwich). That will help the inlay to go down nice and straight. Nice work on a pretty sophisticated project. Thanks for video!!!
@rickcimino5483
10 ай бұрын
unreal how much work goes into making one of these videos......not to mention the project itself. Thank you Frank
@jimmyrk3
10 ай бұрын
If the software has a user group, you might find the procedure you used was the way to do it... Great tray.👍
@ShouldersMoondog549
10 ай бұрын
Now that is a really nice platter!! love the inlay of maple! Almost makes me want to make something like that! Alas, no CNC or lathe!! The finish is wonderful!! Your videos and woodworking are TOP notch!! Thanks for sharing!! Always look forward to your videos!!
@michaellinahan7740
10 ай бұрын
Frank, making a 2 hour job last a month is called retirement! It is those problem solving situations that makes the grey matter work and keeps the interest up. I have been adding 'features' to my drill press (motorised up/down table, automatic lock/unlock and air or lubrication blast inspired by Marius Hornburger) for the last 2 months as I wait for parts or change the arduino code to get it working as it should.
@theodoranorton4779
10 ай бұрын
So great that you were able to get on top of the bit-radius factor which has been such a strong snag in your design process. The result is exquisite.
@williamshs313
10 ай бұрын
It’s fascinating to watch how you work through the issues. Thanks for sharing all the thought process..
@MarkAlexanderBuchanan
10 ай бұрын
I absolutely love your combination of hi-tech and analogue craftsmanship, Frank. As always, the finished piece was incredible. Thank you so much for all the effort you put into sharing your thoughts and processes with us.
@JuergenHelmers
10 ай бұрын
Turned out (sic!) really nice! lovely project and well done!
@davidepperson2376
10 ай бұрын
Such beautiful creations you make. As if art had married math and science…
@ludwigetc
10 ай бұрын
Always love the 3D overlays! And the bowl turned out so beautiful 💗
@provostkhot
10 ай бұрын
I honestly don't, they are annoying and obscure Frank's great craftsmanship.
@vlajkozr
10 ай бұрын
man, you are from outer space! i literally cannot follow! kudos to you
@sallyweiner4180
9 ай бұрын
Remarkable video and remarkable bowl. You are so gifted!
@loucinci3922
10 ай бұрын
A lot of trial and error. Kudos for your perseverance. Turned out real nice.
@avaDesdemona
10 ай бұрын
When pushing the plugs in place you're trying to compress air and glue (you have a pretty tight fit of your pieces, the glue is a good sealant for trapping the air) so a tiny hole somewhere in your plug or your main pieces might help with clamping, because then the air can escape.
@glencrandall7051
10 ай бұрын
Great project. Alas there is no CNC in my life. Thank you for sharing. Have a great day and stay safe.🙂🙂
@danaowen9014
10 ай бұрын
I realy like this piece, great color and inlay.
@kenc2257
10 ай бұрын
What an interesting project. The thought processes and problem solving were pretty involved. It turned out really lovely.
@brockroberts4258
10 ай бұрын
Frank, you never cease to amaze me!
@AntCBCV
10 ай бұрын
Thank you for spending the time to show us your process and mistakes!
@johnthompson6656
9 ай бұрын
True artistry.
@williamellis8993
10 ай бұрын
That's fantastic, Frank. The only problem for me is that since I don’t do CNC work, my head is spinning from all the explanations lol. That doesn't detract from how amazing it turned out, though. Bill
@anthonyfreeman5858
10 ай бұрын
That is a very unique piece. Great work Frank.
@chadwaldrop2378
10 ай бұрын
Nice work! I kept thinking that would be a great concept for a Christmas platter. The shape even looked like a tree and the inlays ornaments.
@vertitron
10 ай бұрын
I’d love to see your take on a crokinole board! This kinda reminded me of one
@emaildavidlehman
10 ай бұрын
Beautiful, as always.
@ektopia
10 ай бұрын
You lost me at the start but it's a fascinating project. Well done. Looks incredible
@samhklm
10 ай бұрын
Love the bowl. Can you do a second one on the CNC. Just to see how it would turn out.
@tasesq
10 ай бұрын
That’s beautiful. Something to mount on the wall.
@BuildswithBrian
10 ай бұрын
Your perseverance is admirable 👍 Great project and video Thank you Frank
@Lee-qp6gf
10 ай бұрын
You sure worked for this piece but then, that's what make it fun.
@Paul_Lane
10 ай бұрын
Very good explanation and beautiful project. It has a Frank Lloyd Wright feel to it.
@465maltbie
10 ай бұрын
Very nice, thanks for sharing all you have learned. Charles
@kaisera4996
10 ай бұрын
Looks so beautiful
@TheMortenjohansen
10 ай бұрын
A pleasure to watch. Thanks for making videos 😊
@prodeous
10 ай бұрын
Another fun project. And as always, enjoyable to watch. :)
@MichaelNatrin
10 ай бұрын
Impressive making and filmmaking. Great work!
@MCsCreations
10 ай бұрын
Stunning piece, Frank! Really beautiful work! 😃 Sometimes all the work and headache pays off! Anyway, stay safe there with your family! 🖖😊
@haroldmoore2563
10 ай бұрын
Great Video! Love the technological overlays!
@bbassett
10 ай бұрын
awesome work as always!
@johnd.4385
10 ай бұрын
Amazing work! Thank you for sharing.
@kschleic9053
10 ай бұрын
If you were going to do these inlays on a much more expensive or harder-to-replace substrate, it might be worth investing in a low-cost 3D scanner. You could scan the cutouts and their corresponding inlay pieces to confirm they match geometrically before gluing them in... Thank you for innovating at the cutting edge (pun intended) of CNC woodworking:)
@durandanne-john6621
10 ай бұрын
It's gorgeous ! Magnificent item !!! 😊
@terminalpsychosis8022
10 ай бұрын
So very pretty. That looks so good. And so technically complex. Seems like it'd be far stronger than normal (thinner) bow ties. The striped inlay pattern is really cool. It's so fun to watch the constant learning and technical improvement. Always impressive. A clock face like this would be amazing! It doesn't have to have numbers, just positions. Maybe symbols for the cardinal points?
@JakeSpurlock
10 ай бұрын
Looks like a Big12 logo, haha. Great work!
@abrenning2499
10 ай бұрын
Always absolutely awesome👍🏻👍🏻👍🏻👍🏻👍🏻
@user-jf9vr3qx5p
10 ай бұрын
انت مدرسة في الابداع ترفع لك القبعة
@HappilyHomicidalHooligan
10 ай бұрын
20:58 For your next project that requires something held down while it dries but is too large for your clamps, go to your local Value Village or Goodwill store and see if they have an old barbell set and use one of the round disk weights as your clamp... Alternatively, your local Habitat Restore should have some pavers or patio squares you can use... Or, if you live in (or near) a Rural area, see if you can find a large rock with a flat face on it to use as a weight...
@Warrigt
10 ай бұрын
18:29 Bravo!
@DavidWilliams-qr5ro
10 ай бұрын
Always a pleasure to see your work come together. The ability to create, program, figure out the right material, and then make all that work out time after time is a great thing. I used to run CNC milling machines in the 90’s, so I am not sure about the software you have today. Couldn’t you do the tool path for one quadrant, then mirror that in the c axis and the y axis? That should ensure symmetry. Great work Frank, thanks for sharing.
@SRG-Learn-Makers
10 ай бұрын
About the press/holding jig (for glue ups of big pieces where clamps doesn't reach.). I think you could put your pieces under a bench and use rods to push the piece against the top. Those rod doesn't have to be perfect, better if they are flexible so you can bend them into position. I hope it make sense.
@StanCrafted
10 ай бұрын
That's brilliant, mate.
@theinvasivespecies1119
10 ай бұрын
Looks great
@Shae_Sandybanks
10 ай бұрын
Such a cool piece!
@tpsb05
10 ай бұрын
Superbe, comme d'habitude ! Merci
@nickyt3269
10 ай бұрын
for that waste block on the back, some turners on yt use hot glue and it seems to work great.
@kenshoemaker
10 ай бұрын
Try experimenting with using your log as the plug for the inlays. I bet it would look really cool!
@---l---
10 ай бұрын
He uploaded high quality! 1080p! 1440! 2160p !! ( may need to have YT premium) You have to click the settings 'gear' and set it manually.
@johnhunt2390
10 ай бұрын
You can use your CNC router as a clamp to hold something in the middle of a big piece.
@JustinDepew
10 ай бұрын
Interesting idea! Never thought of that one.
@JustinDepew
10 ай бұрын
Wonderful video Frank! I've recently been learning how to do inlays on the CNC too. I'm using the same 6.2 degree bit. I've found that cutting into endgrain makes for super clean inlays, so you might try that sometime. I've been using Fusion 360 to make the tool paths. It seemed to work okay but kinda hacky at times as well. Would be interested to see you try it!
@arnhemseptember2009
10 ай бұрын
Fun piece!
@beaunakamori9845
10 ай бұрын
If you sprinkle a bit of course salt on the glue up it will stop it from sliding:)
@DonMohle
10 ай бұрын
Too bad you've already done the globe, I would have thought the vcarving would have been the way to go on that. Being a retired engineer, I appreciate your measured approach to developing new skills and processes, and am dying to see what you decide to do with this one on a sphere.
@billcornett2256
10 ай бұрын
For pressing the inlays in try a steel book binders press
@dgsurfer
10 ай бұрын
would work for the center chuck adapter as well
@chrissiebeneck3294
10 ай бұрын
lots of setbacks Frank, way to persevere!
@That_Ryan_Guy
10 ай бұрын
This was a awesome video dude! You should look into a arbour press if you looking for something inexpensive. They are small but have a range of forces (1/2 to 5 tons???!) and would be perfect for the inlays. The throat of the press could potentially be the only limiting factor.
@paulkolodner2445
10 ай бұрын
I have a solution to the problem of tear-out in the purpleheart. Unfortunately, it requires a miracle to work: 1. Make the cut-outs extra deep. 2. Fill them in with hard epoxy. 3. Remove material from the surface until you have removed all the damaged wood. 4. Remove the epoxy. Insert miracle here. In integrated-circuit manufacturing, this is done all the time. The "wood" is silicon, and the "epoxy" is silicon dioxide. The silicon dioxide is removed at the end by dipping the wafer into hydrofluoric acid, which does not react with silicon.
@reidflemingworldstoughestm1394
2 ай бұрын
Eighth time is a charm.
@ibrahimkocaalioglu
3 ай бұрын
The success ❤
@GNU_Linux_for_good
10 ай бұрын
_I like that pushing shoe best_
@michaelsmith-ec7ul
10 ай бұрын
nice job
@OldePhart
10 ай бұрын
I saw a press made from Semi trailer air brake cylinders for just this purpose.
Пікірлер: 158