Great video and a superb result William, some excellent tips picked up from you along the way mate. Will help when I finally tackle mine ;) Cheers Mike
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Mike, hopefully you won't fall down the same holes and make a much better job of it than I did,
@billk8579
5 жыл бұрын
Another great turning...just striking. As a fairly new turner I appreciate the instructional comments including the tools being used. I noticed on a black walnut bowl that I recently turned some streaks did result when applying the finish which included the high gloss wax. I may have used too much and I think I also applied a shine juice step. That was probably not a good idea to combine them. Anyway removed that finish with abrasives and reapplied the high gloss wax which turned out better. Your tutorial on finishing was a big help.
@WilliamHuntLatheCraft
5 жыл бұрын
Bill yes, I wasn't expecting to find this bowl inside of the log, it was a nice surprise. Yes, your streaks were almost certainly caused by too wax, less is more when finishing. nI use some high gloss wax then microcrystalline over the top, that usually works for me for a durable finish,
@oneshotme
5 жыл бұрын
Beautiful and the wife loves it as well Enjoyed and Thumbs Up
@WilliamHuntLatheCraft
5 жыл бұрын
Cheers Russell, thanks to you and your good lady 👍
@Wyckedwood
5 жыл бұрын
Ironically, I did a blue pine at almost the same day as you did this one! However, yours is better. I love the way the blue shimmers in the sun.
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Robbie, I was lucky with the wood. The blue/green shimmer I suspect is onset spalting.
@garythomas6866
5 жыл бұрын
Love the look,very nice bowl.
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Gary! 😊
@darrylbuckett5380
4 жыл бұрын
A simple shaped bowl that allows the wood to show off its beauty, Brilliant just Brilliant.
@WilliamHuntLatheCraft
4 жыл бұрын
Thank you Darryl!
@wardausman2795
4 жыл бұрын
That has to be one of your most beautiful bowls. Shape was great. Finish was great. But, the watercolor-like colors were spectacular! Brilliant!
@robhall9620
5 жыл бұрын
Great looking piece. Top job.
@WilliamHuntLatheCraft
5 жыл бұрын
Hi Rob and thanks, outcome nice.
@chrispooley7277
5 жыл бұрын
Nice work as usual mate,it didnt look to wet,the bit I last turned was so wet I thought about swaping JSP power cap for a mask and snorkle! Lol
@WilliamHuntLatheCraft
5 жыл бұрын
Ho Chris and yes, it was only 13% which was OK, it felt much heavier. This is the first piece of MP that I've caught at the right time. Most of it rotten.
@chrispooley7277
5 жыл бұрын
@@WilliamHuntLatheCraft Its funny ol stuff to turn but as you proved looks fantastic if the correct amout of time and effort is applied. I was a Mike Waldts last Tues and hes got a lump in his garage waiting to be turned.
@petemoore1068
5 жыл бұрын
What a fine job i just love the bowl
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Pete, yes I liked it too!
@randyclary8144
4 жыл бұрын
Really beautiful work I really enjoy the way you explain your process I will learn from you
@davidholmes3776
5 жыл бұрын
This is beautiful!
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks David, I was more than happy wit the outcome.
@maggieirving
5 жыл бұрын
A lovely project, William. Again, a superbly detailed tutorial. I’ve learned lots from this. Thank you x
@WilliamHuntLatheCraft
5 жыл бұрын
Thank you Maggie. I learn something new with every project. There again at my age for everything new I remember, I forget two other things...
@anwarkhayal8312
5 жыл бұрын
WHAT A ATTRACTIVE
@leksey7870
5 жыл бұрын
Very nice!
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Aleksy!
@timhalcomb4041
5 жыл бұрын
Thanks for taking time to share this with us have a blessed day
@WilliamHuntLatheCraft
5 жыл бұрын
Thank you Tim, Im glad you enjoyed the video.
@icespeckledhens
5 жыл бұрын
The log turned into a very nice bowl. Thanks James
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks James.
@carmens1108
5 жыл бұрын
This bowl is absolutely gorgeous. I love it!
@WilliamHuntLatheCraft
5 жыл бұрын
Hi Carmen, yes I was lucky with what I found in this piece!
@alansimpson596
5 жыл бұрын
That is a truly beautiful bowl. Monkey Puzzle is of particular interest to me at the moment as I have a friend who is a tree surgeon (every turner should have one) and he supplies me with unusual wood. In return, I help him with rough work and he has recently asked for my help in cutting up and removing a Monkey Puzzle tree which came down in a storm about a year ago. He has also offered me the wood so after seeing your amazing bowl I'm now looking forward to it.
@WilliamHuntLatheCraft
5 жыл бұрын
😌Thanks Alan, great news about the Monkey Puzzle. Keep an eye on it deteriorates very quickly, especially if splating present.
@StuffUCanMake
5 жыл бұрын
This is excellent! I will be a regular here!
@miguelsommariva9173
5 жыл бұрын
I like it 👍🏻🇦🇺
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Miguel, me too.
@williamellis8993
5 жыл бұрын
I love the effect of the knots. Nice bowl.
@WilliamHuntLatheCraft
5 жыл бұрын
Yesm, william, without them it's a piece of old pine.
@georgebrill3072
5 жыл бұрын
Great looking bowl. Thanks for sharing.
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks george!
@leoveroude4492
5 жыл бұрын
Beautiful bowl, perfect video. Thank you!
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Leo, yup I was pleased with this.
@MakingItOutOfTheWoods
2 жыл бұрын
How wasn’t I subscribed to you?? Tut!tut! Lots to catch up on now 🥰🌲🦊🌲
@thomasckuzia7129
5 жыл бұрын
Hi William, This bowl turned out fantastic and your film crew did amazing!The editor should get an extra potato at supper as well! Thanks for sharing you finishing process!Very well done! I've never turned Norfolk Pine but have had a go at Blue Spruce and Hemlock.Not very friendly woods to turn but after a learning curve I did manage to get a few nice pieces out of it. Thanks for the video,,, Tom
@WilliamHuntLatheCraft
5 жыл бұрын
Hi Thomas, the film crew have been fired, I enjoyed this project very much despite the nature of the wood.
@michaelscholl6384
5 жыл бұрын
William, That is absolutely one of the most beautiful pieces that I have ever seen .... congratulations you should be very proud............
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Michael, I was lucky with the wood. I turned it at the optimum time, with Monkey Puzzle it can rot too quickly.
@WoodWizardrybyColin
4 жыл бұрын
Wow thats stunning
@WilliamHuntLatheCraft
4 жыл бұрын
Thank you Colin!
@cidneicarbobiach733
5 жыл бұрын
Muito bom,excelente trabalho
@WilliamHuntLatheCraft
5 жыл бұрын
Muchas gracias Cidnei.
@cortlandhunt4721
5 жыл бұрын
A very glorious bowl it turned out to be! 👍🇺🇸
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Cortland, yes I didn't see it hiding in the log.
@johnwallace4408
5 жыл бұрын
BEAUTIFUL TURN! SAFE TURNING, John
@kobiekaasjager4822
5 жыл бұрын
Wow William what a fantastic bowl, it is awesome.
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Kobie 👍
@derekwilkinson7939
5 жыл бұрын
What a beautiful bowl. I love the rude interruptions by the way. Makes me laugh. Well done and well explained.
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks. Im sorry but my twin has no manners.
@missteeturns
5 жыл бұрын
What beautiful wood and what a beautiful bowl. Love the resin infill too. ❤️🙂
@WilliamHuntLatheCraft
5 жыл бұрын
Thank you, not a particularly pleasant wood to have on the lathe but the outcome worth it.
@paulburton7228
5 жыл бұрын
Lovely bowl William,cheers.
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Paul.
@woodturningguru8857
5 жыл бұрын
Stunning work Bill love the finish.
@WilliamHuntLatheCraft
5 жыл бұрын
Thank you , a nice outcome for a change 😀
@debdottir
5 жыл бұрын
Gorgeous, gorgeous finish. The bowl is wonderful.
@WilliamHuntLatheCraft
5 жыл бұрын
☺️Thanks Deb, great compliment ☺️
@paullawless6044
5 жыл бұрын
Great looking bowl William
@WilliamHuntLatheCraft
5 жыл бұрын
Thank you Paul!
@rogerleslie4282
5 жыл бұрын
Well done William, like the new camera set up. The grey in the wood looks beautiful,nicely explained on your finish process. Cheers mate 🇦🇺.......
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Roger, new camera setup Ok but with some challenges, especially editing 4 sources! I think the green/grey in the wood is spalting but not sure if its a regular feature of Monkey Puzzle.
@roadrunner4404
5 жыл бұрын
Great job, especially how patient you are on you finishing steps. That is my Achilles heel. I will turn a similar bowl now but from a very knot filled Red Cedae log. Inlook forward to your videos.
@WilliamHuntLatheCraft
5 жыл бұрын
For this project, it was all about the finish as there was no technical challenge there. Rotten pith excepted.
@davidburgess1204
5 жыл бұрын
Lovely bowl William,I enjoyed watching .regards David
@WilliamHuntLatheCraft
5 жыл бұрын
Hi David, thanks and pleased you enjoyed it.
@PFWoodturning
5 жыл бұрын
Love it!
@WilliamHuntLatheCraft
5 жыл бұрын
Thank you 😃
@TheMessyStudio
5 жыл бұрын
Gorgeous Piece, William! Love the character! Billy
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Billy, I liked this none too 😊
@debbiecoull6957
5 жыл бұрын
Hi William, you can remove one of your steps. there is no need to de-nib if using Yorkshire grit. Yorkshire grit will de-nib for you as part of that process.
@WilliamHuntLatheCraft
5 жыл бұрын
Hi Debbie. You might be right there. However the diluted coat of sanding sealer will definitely raise the grain quite a bit on this soft wood with a few punky white patches. Dennibing it and a coat of full strength sanding sealer should giver a better foundation for the YG. But that might just be me, I guess its subjective. I have some same timber, Ill try it let you know the outcome.
@debbiecoull6957
5 жыл бұрын
I have been denibbing with Yorkshire grit for 6 months now, on any kind of wood. It handles it just fine. But let me know how it works on diluted sanding sealer as I've never tried that.
@perrinooo
5 жыл бұрын
First time watcher here. Awesome video. Thank you for being so detailed. I am a rookie turner, very eager to learn.Best regards,
@WoodyWood
5 жыл бұрын
William that looks very good shame about the pith but a great solution. Lots of different views as well made for a better viewing experience.
@alaricmedlock6833
5 жыл бұрын
Nice work! One question or maybe I should say observation: When I am turning a bowl or other item that deep, I turn my tool rest so that one end extends inside the bowl to keep from having so much of the tool over hanging the tool rest. I feel that I have better control of the cutting edge of the tool when I do this. Is their a reason for not doing this that I am not aware of? Thanks for your time!
@WilliamHuntLatheCraft
5 жыл бұрын
Alkeric, Thanks for the comments. Good point - usually do this too, depending on which tool Im using and also how big the bowl is. I also have an S rest which i should dust off...
@alaricmedlock6833
5 жыл бұрын
@@WilliamHuntLatheCraft you might want to point this out next time so that new wood turners don't wonder why they keep getting a catch. 😉 I do enjoy your work!
@CaraWeston
5 жыл бұрын
I’m not quite a new subscriber but this is my first comment. I like the new camera setup! The bowl looks beautiful, both in figure and color, and your finish.
@WilliamHuntLatheCraft
5 жыл бұрын
Cara, thanks and welcome to comment. i always reply 😃The new camera set is good despite spending less than £100. It's going to be the subject of a separate video.
@markg8972
5 жыл бұрын
lovely ,who makes Yorkshire grit ,i bet it harry potter ,its magic:)
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks mark. yorkshire-grit.com/ You can get it almost anywhere including Amazon
@glencrandall7051
5 жыл бұрын
William, I like it! I was wondering about the term Monkey Puzzle as it looks like we in the US call Norfolk Island Pine but you explained that there is a difference late in the video. I think the use of resin in the pith was just the right touch. Your commentary during the video is outstanding. Very good explanations of what you are doing and what you are using. I don't much care for the 5X speeds. It makes things a bit frantic. And of course one cannot tell what you are doing either. Please show your processes in real time. If the video is getting a bit long, just explain what you have done and move on to the next process. Bottom line, you produced a great piece. Thank you for sharing.
@WilliamHuntLatheCraft
5 жыл бұрын
Hi Glen and thanks for you comments. Im glad you think the resin was the right solution to the missing pith, I guess a plug would have been an alternative but looked very artificial. Regarding the speed, it's always a difficult choice. The average view time of my videos is just under 7 minutes whatever the full length. That's much better than the KZitem average.
@glencrandall7051
5 жыл бұрын
Are you saying that the average viewer only watches the first 7 minutes of your videos? That totally surprises me. There have been other folks videos that I cannot watch to the end but never yours. I wonder if the average could be affected by going back to check on a specific portion after the whole video had been watched?
@andres78171
5 жыл бұрын
Preciosos te quedo muy muy bonito 👍🇪🇸
@WilliamHuntLatheCraft
5 жыл бұрын
Muchas gracias Andreas!
@yaffapomerantz7519
5 жыл бұрын
A nice piece of work I really love the outcome.
@pandorabox2121
5 жыл бұрын
Hey William, that is one amazing finish on that bowl and the grain, knots and colouring of the woods final out come was really a surprise and quite stunning. Taking notes from Al, you cant you cant go wrong and I think your camera set up is really good, a few times like when you were turning the inside of the bowl you had the wrong camera on and we could not see what you where talking about the whole time but other than that it’s great. I’d like to see your set up video here on this channel, please. I really enjoyed everything about your videos your editing, speed and most definitely you humour and the turning of course. Till next time keep on turning. 📐💜📐
@WilliamHuntLatheCraft
5 жыл бұрын
😊Thanks Cathy for your comprehensive comments 😊Yes, I too was surprised as to the outcome, a pleasant one for a change. The new camera setup is taking some getting used to, ill get there in the end. On the downside editing is far more difficultlt than with single camera. Ill get there eventually.
@barrycook4690
5 жыл бұрын
Well that ended up a treat William for a while I thought it was heading for the fire, good job 👍👍
@WilliamHuntLatheCraft
5 жыл бұрын
Hi Barry, yes me too, but nice surprise though 😄
@stevefromlondon9175
Жыл бұрын
Hey William, I have learnt a few things here thank you for that I have just got some monkey puzzle timber which I'm drying out it's still wet can you are anyone else tell me when is it safe to turn plus leave the bark on or off I have sealed the ends the bowl looks fantastic Regards Steve UK London
@MakeDoAndMend1
5 жыл бұрын
Hi William. Love your videos and very informative. I have a small wood lathe and started turning bowls etc. However my biggest problem is finding wood that I can afford. I live in Corby UK but local wood yards are mainly green oak, railway sleepers or pine. I occasionally get Hazel logs from local woods. Can you suggest a few places. Ps I visit Norfolk a few times a year. Cheers from George and Jane
@WilliamHuntLatheCraft
5 жыл бұрын
George and Jane. Im down in Somerset and I get most of my wood from arborists/ tree surgeons. They all have "look for" lists of timber that I need. Other than that you can advertise in village magazines very cheaply informing the community that you are looking for wood. Best source of course is turners suppliers but you'll pay a premium price.
@Chrisparkerwoodturner
5 жыл бұрын
Nice turn will , it's a wood i haven't managed to turn yet looks interesting stuff well done mate 😁
@WilliamHuntLatheCraft
5 жыл бұрын
Thanks Chris, look out for some, its worth the time to locate some.
@artlandry233
5 жыл бұрын
Your piece came out beautiful! But I do have a question does the wax finish hold it shine over the long term? I use poly because it seems to hold the shine for quite awhile.
@WilliamHuntLatheCraft
5 жыл бұрын
Thank you Art. Yes the combination of the HSHG with Microcrystalline Wax over the top is very durable.
@dominangel23
5 жыл бұрын
I love your work but there is more name dropping in your video than you're likely to hear at a society ball.
Пікірлер: 116