Thank you all for watching the video. Do not forget to comment and subscribe to the channel. If you liked share the video with your friends.
@sambaggins2798
3 жыл бұрын
Do you sell your knives online at all? Or is everything custom order?
@daanishsaifi7164
3 жыл бұрын
I want to buy this knife 😁
@Huntrezz
3 жыл бұрын
I've seen lots of left over steel cut in your video , wouldn't you mind if in next video you make a stuff from those left over steel pieces??? & Yes plz make a carbon steel , i never seen a video on KZitem blacksmith melting & forge a real carbon steel 😘😘😘😘😘
@fz-makingknives3663
3 жыл бұрын
You can buy the first knife in time. It is now available in our store.
@daanishsaifi7164
3 жыл бұрын
Plzz provide me link of your store
@beardawgjohnson6432
2 жыл бұрын
These knives are amazing. This particular design really stands out but your process and attention to detail is what makes it special. Nice work!!
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@Александр-р6ы9ъ
2 жыл бұрын
Нож просто бомба! Фома, толщина и цвет клинка просто потрясающие, рукоять я считаю очень удобная, практичная и красивая! Блестяще снятое видео! Огромное спасибо за ваш канал.
@fz-makingknives3663
2 жыл бұрын
Thanks 😊😌👍
@АндрейКрыгин-ч9ч
Жыл бұрын
Нож для рубки капусты по осени в огороде
@konstantinpostal
3 жыл бұрын
Сегодня кузнечный праздник какой-то - сначала Shurap выкладывает видео про нож и метеоритной стали и следом за ним FZ Knives булатный нож из бит для шуруповерта - круто!!!
@fz-makingknives3663
3 жыл бұрын
👍😁
@SergeyLevitin
3 жыл бұрын
+1
@alikbekniaz5571
3 жыл бұрын
После таких работ,сколько она будет стойт ? Этот нож......
@Тибидох-д6г
3 жыл бұрын
А из стальных зубных коронок слабо нож смастерить. 😉
@fz-makingknives3663
3 жыл бұрын
Нету столько коронок)
@jamieofalltrades536
3 жыл бұрын
I really appreciate the fact that you took the time to clean all the scale and impurities away before continuing to work the steel. I see so many people beat the cold slag back into the steel during the process without cleaning it away from the anvil or power hammer surfaces.
@jacobansley5864
2 жыл бұрын
I'm in complete awe at your skill and it's not just a cutting, chopper, tool it's a work of Art! Heirloom!
@fz-makingknives3663
2 жыл бұрын
Thanks
@jdungan7384
2 жыл бұрын
I’m not a bladesmith or a knife guy, but I can watch these videos all day long! Well done!
@vyndaio
2 жыл бұрын
It's going to take me a minute to get my jaw off the floor. Every aspect of this knife, the blade, the way it holds its edge, the sheath/scabbard, is absolute perfection. Amazing work, sir.
@fz-makingknives3663
2 жыл бұрын
Thanks
@geraldstamour1312
3 жыл бұрын
Perfect gift for a chef who backpacks and camps!
@fz-makingknives3663
3 жыл бұрын
👍
@BuddWolf
3 жыл бұрын
I’m a Damascus steel nut. I must have 50 knives made of it, but not one wootz steel knife yet. The sheath you made for this knife is especially❤️ beautiful. Great work, best of luck 🍀to you and yours
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@willysworld1018
2 жыл бұрын
It’s not wootz it’s Damascus the only real wootz steel blades are in museums the art of making wootz steel is lost the only people who could actually make it died around 1,200 a.d this is just a case forged Damascus some drill bits melted down within a piece of tube steel then grinder down to the goodies inside or he cut it away from the melted goods inside then forged it into a knife not wootz the pattern has to come from ore raw ore smelted down and forged out not folding it or melting drill bits down in a vessel then prying it away and banging a knife out wootz is lost to time a craft that may never be resurrected because we simply don’t know how ore what they mixed with the ore to make it........no one can make wootz steel
@willysworld1018
2 жыл бұрын
Iv told fz this but he doesn’t believe me lmfao but you can look it up yourself ....the lost art of wootz steel
@joshjacob1530
Жыл бұрын
Very beautiful valerian steel knife.
@shanek6582
3 жыл бұрын
That wootz you make is beautiful, there’s so many different pattern welded steels, everyone and their brother makes it nowadays, that crucible steel you make is just perfect.
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@bustermv
2 жыл бұрын
I watched but can’t believe what I just saw produced. Such craftsmanship is truly remarkable.
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@evgenyzamansky1155
3 жыл бұрын
Прекрасный нож! Просто нет слов.
@lastsiddhartha
2 жыл бұрын
i am shocked how disgustingly beautiful it all is
@karlwilliams4552
2 жыл бұрын
Yet again another awesome piece but I'm not surprised, I don't get bored of watching you make these stunning blades😉
@TarunMonitor
2 жыл бұрын
kzitem.info/news/bejne/xZqry5uDfGuqZ4o
@RomanMiloslavsky
2 жыл бұрын
Такая же история)
@evgeniistudenko7276
2 жыл бұрын
как узнать цену и почту заказа?
@russianbear2
2 жыл бұрын
Its a thing of beauty and functionality, LOVE it. Got like 200 knives but now I want one of those.
@michaltaranza365
3 жыл бұрын
I am not a big fan of that 90 degree angle of the handle from a blade but I love your craftsmanship and knife design. GJ man.
@quote4898
2 жыл бұрын
I love you man and you are a creative, tidy and distinguished man
@fz-makingknives3663
2 жыл бұрын
👍
@joeknight4250
2 жыл бұрын
That is a beautiful knife, well done. I love every machine and tool that you have used to make it.
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@daltiejul
2 жыл бұрын
Man as soon as you ground that piece down you can tell that was solid quality steel you had made! So much more entertaining to watch blades forged in this fashion. It exhibits way more skill and craftsmanship! Thumbs up for sure!
@earljurgeluks3387
2 жыл бұрын
Awesome skills! I really appreciate how this is, for the most part, hand made with out a lot of jigs and fixtures. Bravo !
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@BrentDelong1253
Жыл бұрын
I have seen a lot of knives made on tv and youtube over the years. This is probably the best one yet. Perfect design and well executed. Beautiful work.
@lightofthemoon5197
3 жыл бұрын
Досмотрел. Нож получился офигенный 👍
@fz-makingknives3663
3 жыл бұрын
Спасибо 👍
@СамоучкаДмитрий
3 жыл бұрын
@@fz-makingknives3663 Просто ПРЕКРАСНЫЙ НОЖ!!!!! Мне нечего более добавить!!!!! СПАСИБО!!!!👍👍👍👍👍
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@shamil324
2 жыл бұрын
@@fz-makingknives3663 как можно у вас купить нож и в какой стране вы ?
@hiltont1232
2 жыл бұрын
This cable turned out to be a spectacle🤩
@randomguyfromtexas1185
2 жыл бұрын
Such a beautiful piece!!! I could watch you making that over and over.
@fz-makingknives3663
2 жыл бұрын
Thanks 😊
@ЕвгенийСлесаренко-г8и
2 жыл бұрын
Валерка
@JustinDaze
2 жыл бұрын
Wow. Insane craftsmanship
@mike41062
3 жыл бұрын
Damn, you did one hell of a job and every part of it just looks amazing. Everything about it just goes together so nice. Awesome that you made that from old bits. Would have liked to see how you got the knife out of the case after sealing it in, because it couldn't just be pulled out, right? It looked like the curves woulda prevented it from being pulled out, without extra steps to free it... Awesome job on this knife and the case- they look great!
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@mike41062
3 жыл бұрын
WOOTz! WOOTz! Saw and replied :) (I know that was a dad-joke level of corny). First time seeing/hearing of that technique and i love it. Made my first knife about a year ago, and had always wondered how they made form fitting plastic or carbon fiber sheathes.. (i tried to soften then smush a section of pvc pipe around the knife- didn't work very good, looked awful, barely did the job- threw it out.)
@FurnitureTechnicalTraining
2 жыл бұрын
kzitem.info/news/bejne/w4CYz2l7f4Sdpn4
@caljucotcas
2 жыл бұрын
woah. thats really beautiful!
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@ЧингизОлоев
2 жыл бұрын
Потрясающая работа! 💪✊👍🙏⚒️🔥💥🗡🔪⚔️🔝
@betocampos6220
2 жыл бұрын
My favorite so far !!
@gonzalovenegasgomez349
3 жыл бұрын
Great work really. The only aspect I see space for improvement is the handle and blade union, the stress concetrates there at the corner and, therefore, we should make a round corner instead of straight. Stress concentrates there upon impact and may lead to cracks.
@fz-makingknives3663
3 жыл бұрын
Ok thanks
@calvinbass1839
2 жыл бұрын
Beautiful work. Thank you for sharing. Have a blessed day.
@garybittinger9733
3 жыл бұрын
Absolutely beautiful work on this knife. You sir are a true craftsman 👏🏻
@vincentsaunders5617
2 жыл бұрын
This guy got everything to make a good knife it's easy for him
@ОтеЦпапыКарлО-ы5ю
3 жыл бұрын
Хорошая работа! Тоже себе такой хочу. )
@MohammadAli-jz3lv
3 жыл бұрын
I NEED ONE .I LIKE FZ KNIVES
@jawbaw6471
2 жыл бұрын
Amazing piece of work and I love that sheath. One question, at the tang/blade junction the cuts are at 90 degree angles. Are you not worried about creating 'stress risers' which could lead to a break at the tang junction?
@FurnitureTechnicalTraining
2 жыл бұрын
kzitem.info/news/bejne/w4CYz2l7f4Sdpn4
@mylord4321
2 жыл бұрын
Nothing like being a MASTER
@rajeshhimirika3973
3 жыл бұрын
U should compete in forged in fire. All the best.
@l.a.braganca3371
2 жыл бұрын
Poucas vezes eu vi uma faca tão bonita... parabéns.
@Shadow-bx8ri
2 жыл бұрын
Very true brother. Just was going to say that. And his blades will "keel"
@poppabearskitchen1769
3 жыл бұрын
Excellent craftsmanship.
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@cmex1336
3 жыл бұрын
За грибами самое то.)
@paulpagotto1846
3 жыл бұрын
That handle is awesome👌
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@petryshchenkov2008
3 жыл бұрын
Good job 👍
@fz-makingknives3663
3 жыл бұрын
🍻👍
@petryshchenkov2008
3 жыл бұрын
@@fz-makingknives3663 😁
@FlyJengka92
3 жыл бұрын
koi teu coy🇵🇸🇲🇾🇵🇸
@qtstextile
2 жыл бұрын
how can you dislike this work. health in your hands. Although it is not the field I work in, I enjoyed your work. I will watch the channel.
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@smiggypaul
3 жыл бұрын
i dont know why people like pattern welded steel when this way looks so much better
@fz-makingknives3663
3 жыл бұрын
👍
@kassiog.6595
3 жыл бұрын
Surely better than simple pattern welded steel, but complex mosaic damascus is another story, like the one Ilya made for his new sword
@smiggypaul
3 жыл бұрын
@@kassiog.6595 yes that sword is a beauty, but i still prefer the almost simplicity of this steel.
@jistyclovek4693
3 жыл бұрын
@@smiggypaul Although it seems in the video simply, I think do something like this is much more complicated and requires a lot more experience and skill then pattern welded steel.
@smiggypaul
3 жыл бұрын
@@jistyclovek4693 i agree, its why i said almost ;) its deceptively difficult.
@billobrien4761
2 жыл бұрын
That's a work of art!
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@yintaichi
3 жыл бұрын
Absolutely Beautiful.
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@Southern_Perspective
2 жыл бұрын
Best handle design I’ve seen by far. And I haven’t even started watching this video yet
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@Southern_Perspective
2 жыл бұрын
@@fz-makingknives3663 Alright, that was awesome. The blade, the holster.. all of it. Are these for sale?
What an incredible craftsman you are ... and ... in so many disciplines. This should be a Museum Piece !
@henryganzer4685
2 жыл бұрын
very impresive piece of art
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@sotirisfilippou2769
2 жыл бұрын
darn that was satisfying to watch :) well done sir !
@P1r4t3Qu33n
2 жыл бұрын
i need one of these wootz wonders in my life
@sirusgalt5694
2 жыл бұрын
Digging the up cycle videos. I always hate to throw out broken tools.
@billymadison8036
3 жыл бұрын
Beautiful. This video was time well spent
@zelowforever
2 жыл бұрын
beautiful knife, beautiful work.
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@davexander4142
3 жыл бұрын
Beautiful free hand grinds man! Sweet knife.
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@МитяКубик
3 жыл бұрын
Piece of art...
@Shin_Lona
3 жыл бұрын
The hammer forged look in the spine was a nice touch.
@keithcastleberry3993
2 жыл бұрын
BRILLIANT!!
@trickywoo356
Жыл бұрын
Man this vid gets my creative juices flowing - thanks for posting, what a beauty!
@nickk.827
3 жыл бұрын
That my friend is a thing of beauty!!😁👍
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@nickk.827
3 жыл бұрын
@@fz-makingknives3663 you are very welcome your work is superb! I am a semi retired gamekeeper in England and I would like one last knife made before I retire. Interested?
@fz-makingknives3663
3 жыл бұрын
Do you want us to make this knife for you to order?
@nickk.827
3 жыл бұрын
@@fz-makingknives3663 not that exact knife! I would like something about 3 and a half inches blade length, with a stag horn handle, Sharp and strong, something I can pass down to my grandchildren. A big ask I realise.
@STEVEI731
2 жыл бұрын
That needs to be in my kitchen! Exquisite knife!
@divedal-gboury8936
2 жыл бұрын
I can't take it 😢..Thank you for your generosity 💐💐💐
@michaelneal2232
3 жыл бұрын
Beautiful knife. You are a credit to the trade of knife making. Absolutely wonderful
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@ИгорьШатохин-п7ъ
2 жыл бұрын
красивый булатный нож. респект мастеру
@ts_972
2 жыл бұрын
Very nice knife 👏🏽👍🏽✌🏽
@tylerkrug7719
2 жыл бұрын
That's some nice free hand grinding
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@ryanterrencegoliath506
Жыл бұрын
Beautiful knife, you should give more details about the types of steel used and talk a little just to explain why and how you prefer to do things, I like knives but can't make them but I love watching videos about knife making, thanks for all the cool knives 👍👍👍👍👍
@fz-makingknives3663
Жыл бұрын
Thanks
@adamscottv
2 жыл бұрын
Incredible skill.
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@ironlg4588
2 жыл бұрын
Ой красавчик какой молодец 🤝
@Americane121
2 жыл бұрын
Outstanding!
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@twasbrillig33
2 жыл бұрын
the handle itself is a masterpiece
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@dm3stone
3 жыл бұрын
Awesome build.
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@chitoalfonso8800
2 жыл бұрын
Awesome craftsmanship!
@vonHannersdorf
2 жыл бұрын
I fall in love... Very beautiful knife!
@ronboff3461
2 жыл бұрын
functional art! beautiful!
@nealenns7869
3 жыл бұрын
Love this blade
@fz-makingknives3663
3 жыл бұрын
Thanks
@yonuelleon743
2 жыл бұрын
HERMOSO trabajo,gracias disfrute mucho el video ,saludos desde cuba
@jcmee91
2 жыл бұрын
You made the knife unnecessarily thick but it came out good, nice job on the scabbard.
@gabrieljordasoler3298
Жыл бұрын
Beautiful job.... Well done.
@fz-makingknives3663
Жыл бұрын
Thanks 👍
@richerworldproductions
Жыл бұрын
WOOTZ! There it is! Gorgeous knife!!
@James-lz6eh
3 жыл бұрын
Absolutely beautiful chopper.
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@phil2927
2 жыл бұрын
Absolutely incredible workmanship!
@Damaged_goods3333
2 жыл бұрын
That’s a good looking blade! Canister/ingot damascus for the win!!
@Panzerblitz
2 жыл бұрын
superb!
@fz-makingknives3663
2 жыл бұрын
Thanks 😊
@ifebuchegerald972
2 жыл бұрын
Very interesting
@DragonKnifeChannel
7 ай бұрын
Wow! It's amazing. I like Damascus and trying to make from many things. But it's new for me.
@gun189-f5c
2 жыл бұрын
Very nice the best knife
@fz-makingknives3663
2 жыл бұрын
Thanks 👍
@rachidhaddane3571
3 жыл бұрын
Thank you FZ Very good knife Very good work
@5SDIYCreates
3 жыл бұрын
Nice job 👏👍.
@fz-makingknives3663
3 жыл бұрын
Thanks 👍
@stevenrichardson7882
2 жыл бұрын
If only I had the skill to make one or the money to buy one? Top quality 👍
@hernanmoreira5455
Жыл бұрын
Impresionante mano de obra, es una pieza de colección, para jactarse los próximos 60 años. Felicitaciones!
Пікірлер: 1,9 М.