I’ve had one for a year now. Still one of my favorites. Congratulations on the purchase.
@AngelArms1911
2 жыл бұрын
Thank you for response!
@garyjcsizmar4636
2 жыл бұрын
I have a dbl stack Rock Island in 9mm /22 TCM and purchased it years ago. It shoots great and the 22TCM is a blast to shoot.
@jasonb7878
Жыл бұрын
Thank you I have been eyeing that gun. Very informative
@AustinArmory
2 жыл бұрын
Great video buddy! Keep up the good work!!👍🏼👍🏼
@bobanderson4470
2 жыл бұрын
I have the 2015 10 round version 9mm/22tcm, had to replace and tune the extractor, normal wear, it runs flawlessly. Love this gun, metgar mags are available thru armscor about 35 dollars not too bad
@brutesquadbbq2268
Жыл бұрын
Best bet for magazines is to get some MecGar P18 mags. If you can find them they’re usually fairly inexpensive. Around $20 or so. But once you get them you’ll need to change out the baseplate for the Taylor Freelance mag extensions. You’ll still wind up spending as much as if you bought the factory mag but you’ll have 21 round mags, and the MecGar mags are very high quality. Buy 2-3 of them and you’ll never need to buy any again. Best bet for finding the mags is at your local shops. Just look around a few different shops and you’ll find some. An even better bet is at a gun show. There’s always a bunch of oddball old mags there.
@XX-166
Жыл бұрын
What’s the necessity for the Taylor base plates?? Increased capacity?? Is there an additional spring change needed to accommodate the Taylor baseplates??
@brutesquadbbq2268
Жыл бұрын
@@XX-166 the front edge of the factory baseplate on the P18’s will hit the mag well and keep the mag from being fully seated in the gun. You could grind them down a little bit and then they’d seat just fine but they’d be a little awkward getting them in. The Taylor’s give you a little extra length so they’re easier to manipulate with the giant mag well. I bought longer springs when I did mine but ended up not needing them.
@XX-166
Жыл бұрын
@@brutesquadbbq2268 any product numbers for those needed baseplates form taylor? Also these don’t increase the capacity correct?? This is strictly for fit and function?
@brutesquadbbq2268
Жыл бұрын
@@XX-166 I don’t recall, sorry. But they should be fairly easy to google. And yes they increase capacity +4 from 17 to 21 rounds.
@peterschmidt2849
2 жыл бұрын
I had the 10mm 6” absolutely an animal
@84jgs
Жыл бұрын
Send it to Hayes custom guns…worth it!
@Kirt44
Жыл бұрын
Really nice looking gun would like to have one just like that
@Stealther
2 жыл бұрын
I have the .40 version. Been thinking about converting it to 10mm
@SiempreAlgoLoco
2 жыл бұрын
I appreciate the video. I’m considering buying one. Can the grip be replaced with standard G10 sized 1911 grips?
@brutesquadbbq2268
Жыл бұрын
It comes with G10 grips if you’re wanting the function of a G10 grip. If you’re wanting a different look, then there are grips that are available, but standard sized 1911 grips will not work. Just look up Para grips, or RIA double stack grips.
@SiempreAlgoLoco
Жыл бұрын
@@brutesquadbbq2268 thanks
@randallthomas5428
2 жыл бұрын
I have a 9 mm and I love it one question I have is do they sell grips in case you want to change them out I thought about that. Appreciate your help
@AngelArms1911
2 жыл бұрын
Yes! They do but as of right now they only make a few colors, I do know there is on guy/ company that makes custom ones but he pretty much does it by hand other than that they have a few G10 colored grips
@randallthomas5428
2 жыл бұрын
@@AngelArms1911 Could you give me information on where to get these grips so I can see them? Thank you for your help much appreciated
@randallthomas5428
2 жыл бұрын
@@AngelArms1911 Who would I contact?
@wood-wheel-wizard
2 жыл бұрын
Me gusta! Need shooting footage.
@georgemarrero1053
2 жыл бұрын
Really like the gun. Good review. One question; Can that mag well be removed? Thanks for your vid.
@AngelArms1911
2 жыл бұрын
The mag well can be removed but because it’s designed to come with it out of the factory it’s got the funky grooves when you take it off
@pete-mz9vr
Жыл бұрын
Modify mag catch to use STI magazine s
@dorout1
Жыл бұрын
Not sure if I should go with an RIA pistol or a CZ shadow 2.
@AngelArms1911
Жыл бұрын
Cz you’re gonna get a better trigger, but rock island is gonna be the same as everything else tbh, definitely still gonna pay more with CZ too
@TheQuasimodoH
Жыл бұрын
Is this the same as the threaded version ?
@AngelArms1911
Жыл бұрын
Yes pretty much, the barrel and sights are the the only differences between the models
@gravy4212
2 жыл бұрын
That’s the one I want 👍
@Don-zk4ix
2 жыл бұрын
Staccato bro is best
@teamtate322
2 жыл бұрын
Staccato is entry-level to the 2011 world (pre Springfield Prodigy) but Night Hawk,Infinity and Atlas runs circles around Staccato.
@luke8222
2 жыл бұрын
No it’s not.
@cedricwilliams7990
2 жыл бұрын
Best based on the training period ask military personnel or leo or competition shooter I questioned people's illusional minds set a weapon is a tool physical fitness mental training survival training may give you a edge not a video game injuries or fatalities real time scenario train well warrior way pray for peace prepare for war
@redstedman
2 жыл бұрын
Another “off the cuff” unscripted, unrehearsed, unprofessional, rookie video. Hint- write. Edit. Rehearse. Rehearse. Rehearse. Film.
@wood-wheel-wizard
2 жыл бұрын
I’m more tired of the same ass collection of glocks everyone has. I’ve come to find out, I have an awesome collection compared to what I see on KZitem.
@cryosword1904
Жыл бұрын
what kind of mags does it take
@AngelArms1911
Жыл бұрын
Mag is made by rock island, but it is compatible with R1 mags and STI mags, as well as the prodigy mags
@royhooker1561
2 жыл бұрын
I just picked mine up in 9mm , been looking for almost 2 yrs and walked in and there it was at my local gun shop, but now I’m on the hunt for stinking more mags 😬
@juanjustice2
2 жыл бұрын
Lemme know where you find extra mags if you find any online
@teamtate322
2 жыл бұрын
Try Ronin Grips for extra mags
@sinistershooter1
Жыл бұрын
They take para P18 mags. I bought extended base pads for mine, making them 20 round capacity.
@valreyjung
Жыл бұрын
@@sinistershooter1which base plates? Taylor?
@sinistershooter1
Жыл бұрын
@@valreyjung Yes, I got the Taylor ones.
@Revattherange
9 ай бұрын
I love my Pro Match Ultra! I just wish that RIA gave you more than one mag. I did a tabletop of mine here--> kzitem.info/news/bejne/tqaEz3WBhIGAgawsi=6WVNqR2CbR1GyNRj
Пікірлер: 47