Get my free pipe fittings template file and Plumbing in Revit mini course at: www.mepguy.com
@burtan2000
5 ай бұрын
revit is wrong. They can call it whatever they want, but AFAIK there aren't any tees with a branch at 45deg. look at page 53 here: chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/www.charlottepipe.com/uploads/documents/technical/Plastic_Pipe_Fittings_DC-DWV609.pdf A sanitary tee has a branch at 90 degs, but it sweeps into the line. At least for the DMV. I can find a dozen good, technical sources that show that fitting that revit says is in the tee class that all show it as a wye.
@abdurrawoof554
5 ай бұрын
Thanks man,whole day went into vain. Finally landed here,Never disappointed.Huge respect
@mep_guy
5 ай бұрын
Glad I could help!
@jayblake682
Жыл бұрын
This is nothing short of brilliant. I feel so stupid. I had changed our p-trap to an elbow, but I never considered changing the wye to a tee. I really don’t know wye 😂. Thanks again for this.
@mep_guy
Жыл бұрын
I know! I wish I could take the credit for thinking of this on my own. I learned it from one of my course members! So great to collaborate with others! Wye revit set up the fittings this way is beyond me. But I'm glad I finally have a solution!
@jayblake682
Жыл бұрын
@@mep_guy me too. Thanks and have a Merry Christmas
@mep_guy
Жыл бұрын
@@jayblake682 Merry Christmas to you as well!
@jayblake682
Жыл бұрын
@@mep_guy I have to tell you. I’m on vacation this week and next, but I couldn’t help myself. I logged in and fixed all of our template settings yesterday afternoon. I blame you for this 😅
@mep_guy
Жыл бұрын
@@jayblake682 🤣
@kafedziski
Жыл бұрын
Love the tip! Thanks!!!
@mep_guy
Жыл бұрын
Hey Pavle! Glad you liked it!
@JBSale29
3 ай бұрын
Thanks a lot mate.
@martincooperbradford
Жыл бұрын
These videos are so helpful being new to Revit. Do you have a pipe fittings template for No Hub Pipe? That would be huge, especially if you had Husky Clamps for the fittings. Would love to know how you can draw the pipe and it would automatically draw the clamp every 10' for straight runs. Then you could find all of the instances and get an idea for Stock (rough idea). Keep the videos coming!
@mep_guy
Жыл бұрын
I actually get that request a lot. Are you on the construction side of projects? I'm on the design side so there isn't a need for that but I can see the benefits to doing this in construction. Check out my "Find Pipe Length" video. That should get you started. I'll definitely do a video on using no hub couplings in the future!
@divyeshpatel5652
4 ай бұрын
Is there a way to connect two pipes at different elevations but from the main run going to the branch which is at higher elevation with a wye that is vertical and then go straight up perpendicular on the same plane as main branch and then put a 90 elbow to connect to the higher branch
@mep_guy
4 ай бұрын
Check out this video: kzitem.info/news/bejne/1o2u2aWJgaebgpwsi=d1XCNgZpueJYwU6f
@andregivano5897
Жыл бұрын
Thanks for Video masterr
@mep_guy
Жыл бұрын
You are very welcome!
@abdelrahman5326
4 ай бұрын
Respect!
@mep_guy
4 ай бұрын
Thanks!
@RASHEEDKHOKHAR1975
Жыл бұрын
Excellent..... Appreciate... In case of rotated wye... How connect hi point tio low point Wye connection
@mep_guy
Жыл бұрын
Can you explain your question in a little more detail?
@RASHEEDKHOKHAR1975
Жыл бұрын
@@mep_guy can you pl. Share with me your email address i will share with you snips....
@mep_guy
Жыл бұрын
@@RASHEEDKHOKHAR1975 it's "theguy@mepguy dot com
@MrMilnzy
Жыл бұрын
What about if you have 2 parallel pipes 1 7"higher than other and you want the wye rolled to connect the 2?
@mep_guy
Жыл бұрын
Watch my rock and roll pipes video!
@sayedsaifullah6559
Жыл бұрын
Thanks for Video Pipe Fitting Template file unable open due to not upgrade in Revit 2017 version please upgrade it
@mep_guy
Жыл бұрын
You should be able to open the file in the 2020 version of Revit or newer.
@user-vn4tp8cm2d
4 ай бұрын
Hi Ryan. I couldn't find the free pipe fittings template. Do you still have it available?
@mep_guy
4 ай бұрын
I decided to make it $20. I hope that's not a deal breaker. I added more stuff to it.
@musicremember9921
Жыл бұрын
NICE
@mep_guy
Жыл бұрын
Thanks!
@rasheedkhokhar1768
Жыл бұрын
share the link of your free fitting template
@mep_guy
Жыл бұрын
Go to mepguy.com and sign up for my free mini course to get the fittings template.
Пікірлер: 35