Really kind of you to post that video and help others out. I stumbled onto your video whilst looking for X56 throttle teardowns - I don't have the same issue with my X56 - I get constant ghost presses so I'll be pulling mine apart too.
@MANGO-md8yy
4 жыл бұрын
What kind of ghosting do u have thou
@MyFlightTV1
4 жыл бұрын
My roommate fixed the ghosting problem by getting a USB 3.1 hub and hooking the X-56 up through that to his PC. No more ghost button presses. Don’t have to take anything apart.
@MANGO-md8yy
3 жыл бұрын
I acually found out recently that I plugged it in a USB 3.0 hub and ghosted but when separated on the pc and hub it works its also the power that is being supplied
@maverickmj
3 жыл бұрын
Thanks. Yes, I thought it was a hardware problem, not a software problem. Simple work, and how effective. Tomorrow I am dismantling my throttle and doing a correction. Thanks for the video.
@MANGO-md8yy
3 жыл бұрын
Just be careful the greece is very sticky wear some gloves
@maverickmj
3 жыл бұрын
@@MANGO-md8yy Yes I know. I already undressed once, as soon as I bought it, to get a little bit of this grease, because the throttle was too hard. Thanks.
@Mywk
3 жыл бұрын
Thank you for this, just received my X56 (defective from ebay). Had to replace one of the potentiometers as it was broken, was a quick fix and calibration after.
@Piotes
2 жыл бұрын
I know its old comment but can you give me potentiometer params?
@trucmuche2523
11 ай бұрын
OK and finally the 2 axes are hall effect magnetic or simple pot?
@MANGO-md8yy
11 ай бұрын
I'm not really getting your question are ypu able to elaborate on it more please ?
@trucmuche2523
11 ай бұрын
@@MANGO-md8yy i'm asking (sorry for my english) if the throtle axis are made with trim resisitive pot OR, wuith the new hall effect sensor that use a magnetic field. the second can live many years
@MANGO-md8yy
11 ай бұрын
@@trucmuche2523 thier just gears inside from what I seen dn I thinks it's the magnetic but I could be wrong I haven't opened it back up in years 😅. Hopefully this helps and no need to be sorry bro you good
@trucmuche2523
11 ай бұрын
@@MANGO-md8yy thanks a lot, i'll open mine wher it comes ;-)
@MANGO-md8yy
11 ай бұрын
@@trucmuche2523 I wouldn't open it see if the axis are good and even so if possible return it I took a risk at opening it but do what you must or what you want bro this is just an educational video hopefully it helped
@danielpiazza5195
3 жыл бұрын
I have the same problem but just with my stick and I’ve already opened it and idk why it’s messing up bc nothing inside is messed up
@MANGO-md8yy
3 жыл бұрын
I don't have any idea how the stick would have deadzone or unless its in the software from Logitech for the x56 try that. What game are you trying to play with it?You can also put your own deadzone in the software maybe that ? Hit me up on DISCORD PM me at Mango#6689
@muniemoo
4 жыл бұрын
The pot is either wore out or is dirty. My guess with the amount of grease in there is that it is just dirty. Go get some electric parts cleaner from a automotive parts shop and spray it in the pot.
@MANGO-md8yy
4 жыл бұрын
The gear was put in a negative state from the rotation the throttle is going so by the time I hit 50% it would stop so i just moved the gear back and it worked not good at explaining sorry
@Aphelion79
2 жыл бұрын
Don't do this. Just do a HARDWARE recalibration. Google the steps, it's super dumb and requires you to hold down some switches, plug it in, hit a few more key combos and it'll flash the LED lights. Then you move the throttle through its full range, unplug, replug and BAM it's fine now!
@MANGO-md8yy
2 жыл бұрын
Damm I wish I knew that lol. I made a whole video about it
@MANGO-md8yy
2 жыл бұрын
Thank you very much I'm going to look into that now once I get a chance
@Aphelion79
2 жыл бұрын
Lol sorry man... BUT now I'm experiencing a physical "creep" to full throttle due to the weight of the device. Seeing as you've been inside, got any ideas for that? It happens even when the resistance knob is tightened down.
@TANIL-X
10 ай бұрын
which grease oil should we use?
@MANGO-md8yy
10 ай бұрын
I wouldn't know you can probably find something for toy Greece cause it is plastic and bits of metal or regular Greece for other car used lol I wouldn't know tbh but it's your call on this. Good luck but just be sure to do research.
@Col00Hague
Жыл бұрын
do you not have ghost imputs issues ?
@MANGO-md8yy
7 ай бұрын
No not really this unit has help up even till now yes I think like 2 of the switches on the throttle have stopped working but I worked around them now other then the throttle issue nothing much at all the rest work fine so fare ohh almost forgot the stick side button sometimes has issues where I have to find the sweet spot but mind you guys this unit has been through about 3000 hours of DCS flight multiple modules even choppers so all the switches and buttons are being used
@AOD_Dark
2 жыл бұрын
Its becuase of the gears. perhaps rough play or extended use can cause the teeth to ware down or skip causing the ghoasting effect. logitech should really do shit better. make this part of the throttle more on the quality side, metal gears perhaps.
@MANGO-md8yy
2 жыл бұрын
i got it new like that i didnt even use it that long maybe a week but yeah logitech should work on quality control
@MANGO-md8yy
2 жыл бұрын
I still have it to this day and still works perfect except for a few buttons but other then that 180 well spent for last 2 or 3 years
@fatpie8449
2 жыл бұрын
the x52 rhino is shitty, though i owned it, somehow logitech's stuff feels shitty to me.. i have jumpy rudders, throttle, and the rotary knobs. my stick's side thumb (mini-stick) is also jumpy.
@einarabelc5
3 жыл бұрын
Please don't post in vertical mode. We're looking at other details. Thanks!
@MANGO-md8yy
3 жыл бұрын
Sorry about that I know but didn't realise until I actually posted it lol
@CapStar362
2 жыл бұрын
please dont tell people how to post their videos, if its vertical and you watch it on another phone, even in full screen it works just fine. Cannot stand you people who whine about vertical to landscape, not everyone watches a video at a work bench on a PC or Laptop.
@milordas
3 жыл бұрын
i just noticed mechanic inside is crap of sh1t
@601.JoinAirWing
2 жыл бұрын
Hello. Is anyone here?
@MANGO-md8yy
2 жыл бұрын
Sup
@601.JoinAirWing
2 жыл бұрын
@@MANGO-md8yy My X56 started having a problem with the throttle axes and now it jumps straight from 0 to 50 and then smoothly to 100. Don't know what is going on?
@admin.ChristianoGaio
2 жыл бұрын
Bom dia, boa tarde, boa noite Comprei no MercadoLivre um Logitech X56 H.O.T.A.S. usado e ele apresenta um problema que muitos jogadores de DCS que o tem relata o mesmo problema dele acionar vários botões ao mesmo tempo SEM os tocar e isso é muito ruim no jogo, onde ele desliga a aeronave se você programa algum contactor (botão de pulso) para ligar a parte elétrica da aeronave, um outro para o trem de pouso e assim por diante e ele do nada em solo acionar para recolher o trem de pouso e danificar a aeronave ou desligar a mesma.... Não consigo resolver o problema e fiz uns vídeos do tal problema porem ficou sem áudio por eu não saber me gravar, gravar a tela e o áudio junto.... kzitem.info/news/bejne/x5uM26hnaYKUhII kzitem.info/news/bejne/op6Ik4WAr6ukano
Пікірлер: 41